Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 13 of 15 FirstFirst ... 31112131415 LastLast
Results 121 to 130 of 147
  1. #121
    Quote Originally Posted by danewilson77 View Post
    Wow! Exciting stuff MC.
    Quote Originally Posted by kayger12 View Post
    Very much looking forward to seeing this develop further.
    Thanks guys, it will be slow progress but at least you will be able to see every step

    Today I removed the Rear Deck and associated pieces for a total of 28lbs. Breakdown as follows:

    H/K Amp/Sub: 7lbs
    Rear Deck Speakers: 4lbs for both
    Sound Deadening: 4lbs
    Rear Deck: 3lbs
    Rear Seat Belts + Receptacles: 3lbs for both
    Misc. Metal Brackets: 3lbs
    Misc. Plastic: 3lbs
    Misc. Hardware: 1lb

    Not huge, but it was up high so a good place to lose it. Also, going to put the front door panel speakers back in as at the moment I have nothing to listen to, which, as my daily driver is depressing. They only weigh like 6lbs in total for both sides so no big deal. Pictures of rear deck tonight.


    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  2. #122
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,981
    Final weight now?

    HTC Thunderbolt+TT
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  3. #123
    We are down to an (estimated) 2973.6 with Spare + Jack and 2938.6 without Spare + Jack (full tank of gas, no driver). However, I do believe my estimates are a bit ambitious based on other peoples actual weights. I probably am low by about 75lbs. Some day soon I'll have it actually weighed.


    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  4. #124
    Pictures! Now I need to paint that portion flat black as it is obnoxiously reflective as you can see.




    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  5. #125
    Autocross tomorrow, just found out that new for 2011 if you have no rear seats you automatically are put into the unlimited class - the first autocross this year it didn't apply, I missed the last two, so this should be interesting haha. Maybe I'll just buy some slicks at this point...


    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  6. #126
    Current Tentative List of Things to Do To Car (Keeping it Street Legal):

    Engine
    Complete S54 Motor
    S54 DME & Wiring Harness
    E46 M3 Cluster
    Epic Motorsports Tune
    Bimmerworld Engine Mounts
    aFe Stage 2 Intake

    Driveline
    E46 M3 6-Speed Transmission
    BimmerWorld Strapless Clutch
    BWSport Transmission Mounts

    Cooling
    Bimmerworld/C&R Oil Cooler
    SPAL Electric Fan 30102120

    Exhaust
    Bimmerworld Headers
    Custom LTW Exhaust

    Brakes
    PFC 01 (394, 548) Pads
    Bimmerworld V2 SS Brake Lines
    Bimmerworld Solid Brake Guide
    Bimmerworld Brake Cooling Plates
    AP Flanges, Ducts, Hose

    Suspension
    E46 M3 Subframe & Differential
    Ground Control Coilovers
    Ground Control Camber Plates
    Ground Control RSM's
    Treehouse Racing FCAB's
    M3 RTAB's + Vorshlag Limiters
    Ground Control Rear Control Arms
    PowerFlex Rear Subframe Mounts
    Hotchkis Sport Sway Bars F+R
    M3 Front Strut Bar

    Wheels
    Apex ARC-8 18x9
    Bimmerworld Stud Kit
    Yokohama Slicks

    Safety
    Sparco Evo's

    Fluids
    RedLine 10W-60
    Motul RBF600
    RedLine Water Wetter

    Weight Loss
    Lightweight Battery
    Strip Interior (Leave Dash, Door Panels, Airbags, Seat Belts)
    Strip Entire HVAC System
    Sunroof Delete

    Once I make it a full-on race car I will do a roll cage, front diffuser, and rear wing. Suggestion welcome!
    Last edited by MasterC17; 08-01-2011 at 04:00 AM.


    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  7. #127
    Join Date
    Jan 1970
    Posts
    15,433
    MC, you are one busy boy. Nice going.

  8. #128
    Quote Originally Posted by Marcus-SanDiego View Post
    MC, you are one busy boy. Nice going.
    Thanks! Some may call me crazy, I would tend to agree

    After looking it over, buying all the S54 parts separately would be a total PITA, therefore, I will need a donor car (04+ less than 60k, preferably hit in the rear). Hopefully I can get it cheap, part out everything I'm not using, and come close to break-even. To complete the swap it appears I will need the following major components:

    Complete Motor
    Transmission
    DME
    Wiring Harness
    Rear Subframe
    Differential
    Cluster

    Will also need several 'small' components and will be replacing/updating some.
    Last edited by MasterC17; 07-29-2011 at 12:56 PM.


    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  9. #129
    I believe I will be going with the following coil-overs: http://www.ground-control-store.com/.../II=692/CA=232 and probably with spring rates of 6"/500lbs front and rear.

    Sunroof delete will be done using this and a lot of time: http://rover.ebay.com/rover/1/711-53...3D290582934055

    Brake ducting will be done using the BW Plates: http://store.bimmerworld.com/brake-c...parts-p45.aspx this ducting: http://www.summitracing.com/parts/AAF-ALL42150/ these flanges: http://www.summitracing.com/parts/AAF-ALL42160/ and these ducts fitted to the OEM brake ducts: http://www.summitracing.com/parts/AAF-ALL42141/. The whole kit from bimmerworld would cost ~630 with the front ducts, this route it will cost around $320.
    Last edited by MasterC17; 08-04-2011 at 05:18 AM.


    My Project Thread
    Register Your ZHP | CoolantSnitch

    2005 ZHP 6MT Mods: AFE Intake, Carbon Fiber Hood w/ M3 Bulge, Meyle HD FCAB's, Zionsville T-Stat @ 88°C, Stewart WP, BMW Perf. Rotors F+R, Oil Temp & Press. Gauges, Alcantara Wheel w/ CF Trim, Alum. Pedals + E-Brake, Black Kidney's, Aux Input, Beltronics RX-75 Pro Radar Detector, Beisan Seals + Rattle Kit, Armrest Delete, Schroth Harness, StopTech Pads, SSR Comp-H's

  10. #130
    Join Date
    Dec 2010
    Location
    Hanover, PA
    Posts
    2,024
    Nice!

    Love the sunroof delete (not for me, though )- the M3Forum thread linked in the eBay ad is a pretty sweet writeup.

    Hankook Ventus V4's 205/55/16 | 16" BMW OE Style 45's | ECSTuning 15mm Spacers | Thule 45050 Crossroad Rack | Thule 870XT Fairing | LLumar 35%/20% Tint
    Custom Vienna Austria Euro Plate | GoMiniGo "No-Holes" License Plate Bracket | Smoked License Plate Cover | Black License Plate Frame | Khoalty LED License Plate Lights


Page 13 of 15 FirstFirst ... 31112131415 LastLast

Similar Threads

  1. For Sale: 2006 BMW 330 ZHP Coupe -- 96,000 miles, auto, autotrader, Beaverton, OR, $13,400, silver
    By Marcus-SanDiego in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 3
    Last Post: 05-05-2011, 03:18 PM
  2. For Sale (SOLD): 2003 BMW 330i ZHP Titanium silver/black - SFS 2/4/11 - $12,500
    By Marcus-SanDiego in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 7
    Last Post: 04-13-2011, 06:52 AM
  3. For Sale: 2006 BMW 330Ci ZHP Silver Gray/Black Leather/Manual Coupe in OR
    By ZHPRegistry.net in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 1
    Last Post: 03-24-2011, 03:47 PM
  4. What's black and silver with red all over?
    By Rovert in forum ZHP Gallery and Video Section
    Replies: 6
    Last Post: 03-09-2011, 05:02 AM
  5. Hmm, black cube or silver cube interior trim...
    By az3579 in forum General -- ZHP Related
    Replies: 29
    Last Post: 02-26-2011, 05:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •