Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 2620 of 2620 FirstFirst ... 16202120252025702610261826192620
Results 26,191 to 26,199 of 26199
  1. #26191
    Join Date
    Nov 2017
    Location
    Irvine, CA
    Posts
    830
    I had an intermittent hesitation on starts (would not fire up first crank), turned out the air intake boot was torn in 4 places. Glad I found it before it kept running w/ a messed up AF mixture.

    I replaced with Rein upper and lower boot (the lower boot was not torn but I changed both "since I'm in there") and did a quick cleaning of idle control valve.
    The OE BMW pieces are made of a different material than the Rein. The OE BMW is like a rubbery plastic (NBV was printed on the piece) whereas the Rein is a soft-but-firm rubber ("PVC+NBR"), if this makes any sense at all. Also, the opening of the Rein pieces seemed to be a few millimeters larger in diameter than the OE BMW piece. Just ensure the hose clamps are tight.

    Glad to report the hesitation at startup is fixed and the car is generally more smooth, which is expected now there's no leak after the MAF.






  2. #26192
    Join Date
    Nov 2017
    Location
    Irvine, CA
    Posts
    830
    Engine oil and filter, engine air filter, cabin air filter, wipers replaced. Also changed FCAB as the car developed a slight "thunk" / "thud" when apply brakes. The passenger side FCAB was failing. Disappointing the FCAB lasted just under 50k miles.

    143,500 miles now.

  3. #26193
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,943
    Started a engine swap on this dinan 3 bmw e46. The m54b25 engine lost compression on cylinder 4 so sourced a low mileage ZHP engine to give this car a new lease on life. Follow on Instagram @vas_haus

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  4. #26194
    Join Date
    Nov 2017
    Location
    Irvine, CA
    Posts
    830
    Quote Originally Posted by Vas View Post
    Started a engine swap on this dinan 3 bmw e46. The m54b25 engine lost compression on cylinder 4 so sourced a low mileage ZHP engine to give this car a new lease on life. Follow on Instagram @vas_haus
    That's awesome. Hope you'll have a project thread here, too.

  5. #26195
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,943
    M54b25 is out.

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  6. #26196
    Join Date
    Feb 2016
    Location
    Dallas, TX
    Posts
    338
    Quote Originally Posted by Will View Post
    These are some great updates, fellas.

    Not today, but I added BavSound speakers to the ZHP. I noticed crisper sounds, but less mid-bass/"fullness." As ZHPizza mentioned, they seem to sound better after a few months. Overall, very pleased. The HK system sounded good, but I didn't notice how "muddy" they sounded as compared to the BavSound setup. I do wish they had more mid-bass and that "fullness" though, but it's not a big deal - just use the sound adjustment to +1 or +2 on the bass setting.
    can confirm that the sound improves after all the drivers start breaking in. my HK+bavsound setup sounds incredible and clean after a few months of use - did yours change at all?


    5/2003 Silbergrau Metallic ZHP
    - Sedan :: 6MT :: ARC-8 -
    h&r | drvanos | koni | active autowerke | vibrant | akg | yonaka | powerflex | apex

  7. #26197
    Join Date
    May 2020
    Location
    SF Bay, CA
    Posts
    1,278
    Has a small mishap with the car and bike - turns out bikes do funky things when the tire is completely flat. Luckily, zero paint damage.

    Has anyone with a facelift coupe used one of the aftermarket Chinese lenses from eBay/Ali Express? I wonder how good the fit and durability (UV exposure) it has.



    Edit: picked up a used left (broken) headlight for like $80 shipped to me to scavenge the OEM lense from. The website car-part.com is quite useful!
    Last edited by t.er; 11-09-2024 at 02:46 PM.
    2004 BMW 330CI ZHP (well, technically ZAM)


  8. #26198
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    2,900
    Best outcome possible, glad you found a quick fix
    2005 BMW 330i ZHP - BMWP calipers/intake/strut bar/shifter, M3 CSL front/M3 rear rotors, Coby wraps interior, BBS CH wheels, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover



  9. #26199
    Join Date
    Nov 2017
    Location
    Irvine, CA
    Posts
    830
    Quote Originally Posted by Aeternalis View Post
    can confirm that the sound improves after all the drivers start breaking in. my HK+bavsound setup sounds incredible and clean after a few months of use - did yours change at all?
    Yup. It was improved.

Page 2620 of 2620 FirstFirst ... 16202120252025702610261826192620

Similar Threads

  1. Mini Meet and Shoot
    By M0nk3y in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 11
    Last Post: 06-30-2011, 08:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •