Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Amazon Link for ZHPMafia ZHP
Page 2618 of 2620 FirstFirst ... 1618211825182568260826162617261826192620 LastLast
Results 26,171 to 26,180 of 26199
  1. #26171
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,981
    Quote Originally Posted by t.er View Post
    When it rains... it pours. Something's up with the AC compressor, whether it's the clutch or the compressor itself. Some odd burning smell and the compressor seems to place very heavy loads on the belt. So I took the belt off and did my groceries in the heat.

    And then on the way home got the DSC and brake light on and yellow. Haven't pulled codes yet, car still drives normal, I'm assuming just no traction control for now.



    Sent from my Pixel 8 Pro using Tapatalk
    I don't think a belt failing that way is typical? Something up with the pulley?
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  2. #26172
    Join Date
    May 2020
    Location
    SF Bay, CA
    Posts
    1,277
    Quote Originally Posted by danewilson77 View Post
    I don't think a belt failing that way is typical? Something up with the pulley?
    Yeah I would've thought the belt would just break. The AC compressor seized, which I hypothesize one of the ribs on the pulley may have worse tolerances than the others and cut through that section
    2004 BMW 330CI ZHP (well, technically ZAM)


  3. #26173
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,981
    Quote Originally Posted by t.er View Post
    Yeah I would've thought the belt would just break. The AC compressor seized, which I hypothesize one of the ribs on the pulley may have worse tolerances than the others and cut through that section
    Makes sense.


    Sent from my iPhone using Tapatalk
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  4. #26174

    What did you do for your ZHP/ BMW / MINI today? #[emoji239]

    First, happy Father's Day to all the dads on the forum, hope you guys had a great day!

    I got out my steam cleaner I got for a gift and cleaned off my dirty engine bay on my ZHP today.

    You can see the fuel rail cover (in the background) still dirty . . .

    The steam cleaner did an amazing job cleaning the exterior of my CCV Replacement kit making it shine again The plastics in my engine bay that were steamed were left with a nice clean satin finish.



    Very pleased with the results


    Sent from my iPhone 15 Pro Max using Tapatalk Pro

  5. #26175
    Join Date
    Feb 2011
    Location
    Vancouver, Canada
    Posts
    3,593

    What did you do for your ZHP/ BMW / MINI today? #2



    And on a more real note, Happy Father?s Day to all you dads out there. I?m still around and this is still an amazing mature group considering all the shenanigans we can do with our cars. Keep up the great living and all the pleasures that cars bring to your lives. Enjoy every moment and never take for granted that one smile or compliment directed at you from friends and especially loved ones.
    --Trevor--
    Vancouver, BC

  6. #26176
    I ordered two ZKW headlight lens (ZHP), black alarm sensor cover panel (ZHP), two titan-shadow lower steering wheel trim (one for ZHP and one for M3), two A-pillar airbag covers, six DINAN N-Series Performance Ignition Coils - Black (M3) today.

    Since I have the DINAN Performance ignition coils in my ZHP I wanted to freshen up the M3 with new ignition coils as well. The headlight lens on my ZHP are a mess so I felt it was time to replace them with the ZKW headlight lens.



    Tomorrow I will get the steam cleaner and start cleaning my Alcantara steering wheel before swapping it back into my ZHP. Pending the results, I will then work on my M3's Alcantara steering wheel.

  7. #26177
    Join Date
    Jan 2011
    Location
    Martinez, CA
    Posts
    377
    Quote Originally Posted by cakM3 View Post
    First, happy Father's Day to all the dads on the forum, hope you guys had a great day!

    I got out my steam cleaner I got for a gift and cleaned off my dirty engine bay on my ZHP today.

    You can see the fuel rail cover (in the background) still dirty . . .

    The steam cleaner did an amazing job cleaning the exterior of my CCV Replacement kit making it shine again The plastics in my engine bay that were steamed were left with a nice clean satin finish.



    Very pleased with the results


    Sent from my iPhone 15 Pro Max using Tapatalk Pro
    Engine bay looks fantastic! I?m considering doing the same for mine. Not sure how I?d get to all of the lower parts of the engine bay.

    Care to share your process or a YT link you used? Any other chemicals? I imagine a few detailing brushes and APC?

    Thanks!!!!

    PS-Let us know how the alcantara steering wheel comes out too!


    Sent from my iPhone using Tapatalk
    2004 Imola Red over Black Leather. 6-MT, Navigation, Cold Weather Pkg (the wife loves them seat warmers!), 3.46 Diff, UUC Short-Shift Kit, Tranny Mounts, CDV Delete and iPod mount.

  8. #26178
    Join Date
    Jul 2011
    Location
    North San Diego, Las Vegas
    Posts
    1,981
    Since I lost coolant on my way to LV last 4th of July.

    https://www.zhpmafia.com/forums/show...nding-Problems

    I had my cooling system pressure tested to 18 psi. Replaced the Reservoir cap and bleeder valve replaced. No leaks.

    Also had the ZHP an undercarriage and mechanical inspection. It's all good. Now, ready to return trip to LV.
    Last edited by das boots; 08-01-2024 at 09:04 AM.
    Lawrence
    "But Mama....That's where the fun is!"
    BMW CCA #192742
    San Diego & Sin City Chapter
    NRA Lifetime Member

    STABLE
    '90 M3 AWII - Garage Queen (The Crown Jewel)
    '20 X5 M Sport Tourquis Blue - #3 Son Ride
    '23 X5 M Sport Sapphire Black - #1 Son Ride
    '23 X5 M Sport Mineral White - Daughter & Grand Kids Ride
    '24 X4 M40i Brooklyn Grey - SO's New Ride
    '05 330i ZHP Mystic Blue Metallic 6 spd - My Ride
    '03 Nissan Frontier XE Crew Cab - Hauler & Down Range vehicle

  9. #26179
    Join Date
    Sep 2018
    Location
    Austin, Tx
    Posts
    333
    Not MY ZHP, but I started the process of killing one yesterday



    Current Garage... '00 R11S, '09 HP2S, '12 R12GSA, '00 Black 323iT (wife's), '02 Alpine 325iT (Eileen, Track Wagon), '02 Japan Rot 325iT

    Instagram @ HillPerformanceBimmers
    Email to George@HillPerformance.com

  10. #26180
    Zhp will probably be parked in the garage for the next week or so at least.
    Car died on me at a fuel station due to low battery (no low battery voltage warning on IC). Had to jump start using another car and keep the cables connected for a good amount so battery could be charged, since the 1.5 year old bosch reman alternator seems to have stopped working.


    Sent from my iPhone using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

Page 2618 of 2620 FirstFirst ... 1618211825182568260826162617261826192620 LastLast

Similar Threads

  1. Mini Meet and Shoot
    By M0nk3y in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 11
    Last Post: 06-30-2011, 08:14 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •