It's wild that it adds $185 for a six speed. So expensive. I got lucky by picking up an F10 knob already converted to a shift boot from a forum member.
$204.92 from the bmw mini parts store for the f10 version.
Sent from my Pixel 4 XL using Tapatalk
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
The reason for this is stated at the bottom of the page when you select it. They say they have to buy the shift knob with that emblem to transfer it, which is why it's so expensive. I just went with the F10 route, and used the boot too so I got a new shift knob and new leather boot out of it.
Spoiled by the ZHP shifter and this great thread, you've inspired me to install the F80 knob in my E93 M3. My research over on M3post says the F10 boot leather is a bit thicker than the stock E93 leather and is difficult to get the ring back in. The F80 knob is reported to be the same thickness as stock. And same short weighted knob like the F10 knob
Parts are going on order today!
Pete
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
You know, if not just for the light, imma bite the bullet and get it, one time install, last me the life of the ownership and like &@$$& cool, it's worth it.
Is $172 the cheapest it comes?
And do I need the retro kit
Thanks guys.
__________________________________________________ ____
2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
Hankook Ventus V12
Front: 225/45ZR
Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
[ Staggered on square (17x8.5 +38) ]
There are a few ways you can do this. I opted for a more OEMish and permanent approach with my install. It is detailed here in my project thread...
http://www.zhpmafia.com/forums/showt...215#post605215
If you look at the following posts from the link above, I have posted pictures of the "finished product" in my ZHP showing the results of my work after doing this wiring modificaiton.
As for the two additional wires I used for this retrofit... I pulled them from this:
https://www.ebay.com/itm/Genuine-BMW...e/302109127027
As for the OEM plug, this is what I used:
https://www.fcpeuro.com/products/bmw...mw-61132360043
I had shrink tubing, solder and a soldering station so this was, for me, the best route to make it all look professional and permanent. It is not hard to retrofit this into the ash tray wiring which is where you should be tapping the shift knob lighting wiring to.