Hoping so too! Have tried multiple forums with no luck. Will check the pins again tomorrow.
It’s been a few days since that error arose, wondering
Real nice. Could cut an access window for that oil filter
Oli77 Yesterday, 05:11 PMStrange that the exact same thing popped up before. May be try to get those multiwire connections on the circuit board reseated again, see if the any
Oli77 Yesterday, 05:07 PMSo story time.....
Let me start by saying Charlie sold me a well sorted ZHP and the following story has absolutely no negative reflection
Has a small mishap with the car and bike - turns out bikes do funky things when the tire is completely flat. Luckily, zero paint damage.
Difficult with how bad the weather is but I managed to snap these casual shots on my travel cam:
In the
As the title suggests I removed my gauge cluster to fix the clock button which was broken. Which was the only issue.
Once I put it back,
Hi - who did I just meet in Hilton Head in the sweet imola sedan? NC plate ?zhp?
Bill
It is! According to the OP themselves.
dazed 11-08-2024, 10:52 AMi'd definitely replace that. at the very least, the sealing gasket (orange) near the base looks flat. it's probably why (someone) resealed(?) it using
Aeternalis 11-08-2024, 10:11 AMAs the title suggests I removed my gauge cluster to fix the clock button which was broken. Which was the only issue.
Once I put it back,
PRICE = $3300 which includes cover and stand.
Hi - Selliing just the roof, not the car!
This is the rare shadowline trim
Doing some general maintenance and got to the DISA valve and it was a bitch and a half to get off. Finally got it off and there seems to be some improvised
Last Post By: GeorgeH Today, 06:13 AMI couldn't find this information anywhere.
My CV Axles are shot. Full disclosure, it's my fault for how I installed them.
I got
As the title states I?m offering the complete suspension package, with lightly used sway bar end links.
Bought everything new and only put
DISA Valve: what is this ?
If I understand correctly your question is about the glue at the base where the DISA seals to the plenum?
GeorgeH Today, 06:13 AMIn my experience the original o-rings