UltraGauge OBDII Gauges

[WOLFN8TR]

http://www.ultra-gauge.com/ultragauge/index.htm


http://www.youtube.com/results?search_query=ultragauge+review&oq=Ultra&gs _l=youtube.1.0.35i39j0l9.391353.392753.0.395279. 5.5.0.0.0.0.409.727.4j4-1.5.0...0.0...1ac.1.3KpMBtVbKhI


I just purchased a UltraGauge for the ZHP. I was looking to add a Digital Coolant Temp gauge that would give a more accurate reading. When I found the UltraGauge I knew it exactly what I was looking for. This thing reads and clears engine codes, resets the "Check Engine" light, can monitor several parameters via the OBDII port. You can set alarms for the parameters being monitored which is really nice! If the engine coolant temp gets too high a beep sounds and the screen flashes. Very impressed with the quality and features with a unit that costs $70.


http://img.tapatalk.com/d/13/04/21/u9upajeb.jpg

http://www.youtube.com/watch?v=Mo9naImUBmE

http://img.tapatalk.com/d/13/04/21/segy8esy.jpg

http://img.tapatalk.com/d/13/04/21/9aqava7e.jpg

http://img.tapatalk.com/d/13/04/21/y4eju8uz.jpg

http://www.youtube.com/watch?v=dbZnFZ0wJPA


Change the screen color to match the BMW dash!

Amazon has the colored film.
http://www.amazon.com/Rosco-Lux-Small-Swatchbook/dp/B0002ER2YG/ref=sr_1_4?ie=UTF8&qid=1390023267&sr=8-4&keywords=rosco+gel


http://img.tapatalk.com/d/13/04/27/heqenuja.jpg

1. Cut a business card to fit the screen.

http://img.tapatalk.com/d/13/06/17/gary3yta.jpg

2. Use the first card and cut out another 1/8" wider all the way around.

http://img.tapatalk.com/d/13/06/17/y3asa8yt.jpg

3. Lay the larger card on the red film, tape it down to make cutting it easier.

http://img.tapatalk.com/d/13/06/17/vuvu7yry.jpg

4. Finished product!

http://img.tapatalk.com/d/13/06/17/emyty8yh.jpg

5. Trim all four corners, aids in the install so they don't catch.

http://img.tapatalk.com/d/13/06/17/9ebyqegy.jpg

Installed!

http://img.tapatalk.com/d/13/04/27/9apy3asa.jpg

http://img.tapatalk.com/d/13/04/27/yny7yzun.jpg


Mounting Options:
http://ultra-gauge.com/ultragauge/support/Mounting_Options.html

http://img.tapatalk.com/d/13/06/27/qaty4ute.jpg
http://img.tapatalk.com/d/13/04/25/u8anyjuz.jpg
http://img.tapatalk.com/d/13/04/25/udyqyqu8.jpg
http://img.tapatalk.com/d/13/04/25/y5a4a3u4.jpg

UltraGauge OBDII Plug

http://img.tapatalk.com/d/13/08/10/enejuzar.jpg
http://img.tapatalk.com/d/13/08/10/4unupeba.jpg


UltraGauge Classic and UltraGauge EM common Features:
Supports most 1996 and newer OBD II compliant gas vehicles***
Supports more than 75 selectable Gauges*
Real time and long term mileage gauges
Distance-To-Empty and Time-to-Empty gauges
Auto-Page advance, cycles through gauge pages
Configurable low and high alarms for every gauge
Audible and Visual Alarms
Alarms may be individually suspended.
Displays both current and pending trouble codes
Clear Check Engine Light and Trouble Codes
Current and pending Trouble Code Alarms
Automatic fuel fill-up detection **
Oil change and Service Gauges
Trip Gauges
Speed calibration for wheel, tire, and/or differential changes
Health indicator
Internal temperature sensor that can be monitored and alarmed
Fuel mixture closed and open loop indicator.
Large LCD Display
Display Brightness adjusts automatically to ambient light
Lightweight easy to route OBD II cable
Compact and minimally intrusive.
Mounts with either the included Velcro, windshield mount, or bracket mount.
Low power
Retains configuration and accumulated data across power cycles
Automatically detects and turns off display when vehicle is off
Comprehensive menu system
Comprehensive detailed user manual

UltraGauge EM can display 76+ possible gauges*.
Gauge selection is completely customizable. The actually gauges available are vehicle dependent. If your vehicle supports any of the gauges listed, then the gauge will be available for display by UltraGauge.

UltraGauge currently does not support Manufacturer specific gauges such as Transmission temperature.

Gauges
% Engine Load
Engine Coolant Temperature (ºF)
Engine Coolant Temperature (ºC)
Short Term Fuel Trim Bank 1
Long Term Fuel Trim Bank 1
Short Term Fuel Trim Bank 2
Long Term Fuel Trim Bank 2
Fuel Pressure (PSI)
Fuel Pressure (kPa)
Intake Manifold Absolute Pressure (MAP)(PSI)
Intake Manifold Absolute Pressure (MAP)(kPa)
RPM
MPH
KPH
Timing Advance
Intake Air Temperature (ºF)
Intake Air Temperature (ºC)
Mass Air Flow Sensor 1 (g/s)
Absolute Throttle Position 1 %
Bank 1 0xygen Sensor 1 Voltage
Bank 1 0xygen Sensor 2 Voltage
Bank 2 0xygen Sensor 1 Voltage
Bank 2 0xygen Sensor 2 Voltage
Run time since last start (hours:mins)
Miles traveled with Check Engine Light On.
Kilometers traveled with Check Engine Light On.
Fuel Pressure (Diesel & Direct Injection) (PSI)
Fuel Pressure (Diesel & Direct Injection) (10kPa)
Bank 1 Wide 0xygen Sensor 1 Lambda
Bank 2 Wide 0xygen Sensor 1 Lambda
EGR Flow %
EGR Flow % Error
Evaporative Purge %
Fuel Level % of full
Number of Warm-ups since Check Engine Light Cleared
Miles traveled since Check Engine Light Cleared
Kilometers traveled since Check Engine Light Cleared
Evaporative System (PSI)
Evaporative System (Pa)
Barometric Pressure – Inches of Mercury (inHg)
Barometric Pressure – Inches of Mercury (kPa)
Catalytic Converter Bank 1 Sensor 1 Temperature (ºF)
Catalytic Converter Bank 1 Sensor 1 Temperature (ºC)
Catalytic Converter Bank 2 Sensor 1 Temperature (ºF)
Catalytic Converter Bank 2 Sensor 1 Temperature (ºC)
Catalytic Converter Bank 1 Sensor 2 Temperature (ºF)
Catalytic Converter Bank 1 Sensor 2 Temperature (ºC)
Catalytic Converter Bank 2 Sensor 2 Temperature (ºF)
Catalytic Converter Bank 2 Sensor 2 Temperature (ºC)
Battery Voltage (Measured by ECM)
UltraGauge Battery Voltage (Measured by UG)
Load absolute %
AFR Commanded Ratio
Relative Throttle Position %
Outside Ambient Air Temperature (ºF)
Outside Ambient Air Temperature (ºC)
Absolute Throttle Position 2 %
Accelerator Pedal Position 1 %
Accelerator Pedal Position 2 %
Command Throttle Position %
Boost Pressure, (Relative Pressure) (PSI)
Boost Pressure, (Relative Pressure) (kPa)
Brake Horsepower 1
Brake Kilowatts 1
Torque 1 (ft lbs)
Torque 1 (N.m)
Brake Horsepower 2
Brake Kilowatts 2
Torque 2 (ft lbs)
Torque 2 (N.m)
Mass Air Flow Sensor 2 (g/s)– Calculated
Instantaneous MPG
Instantaneous KPL
Instantaneous L/100Km
Average MPG – General
Average KPL – General
Average L/100Km – General
Average MPH – General
Average KPH – General
Run Time – General
Miles – General (miles)
Kilometers – General (miles)
Fuel Used – General (gallons)
Fuel Used – General (liters)
Average Gallons/Hour - General
Average Liters/Hour - General
Fuel Level (gallons)
Fuel Level (liters)
Instantaneous Gallons/hour
Instantaneous Liters/hour
Distance to Empty (miles)
Distance to Empty (kilometers)
Time to Empty
Volumetric Efficiency (MAP vehicles only)

General Trip Gauges
Average MPG
Fuel Used
Average Gallons/hour
Average MPH
Distance (miles)
Run Time
Average KPH
Average KPL
Average L/100Km
Liters Used
Average Liters/Hour
Distance (kilometers)

Short Trip Gauges**
Average MPG
Fuel Used
Average Gallons/hour
Average MPH
Distance (miles)
Run Time

Average KPH
Average KPL
Average L/100Km
Liters Used
Average Liters/Hour
Distance (kilometers)

Fuel Mileage
UltraGauge continually calculates real-time Miles Per Gallon as you drive. UltraGauge displays real-time and average MPG to help adjust driving habits for maximum savings.

With Real-time MPG, UltraGauge can quickly answer those age-old fuel efficiency questions specifically for your vehicle:

Is it better to drive with the windows down or use the air-conditioner?
Tailgate up or Down?
Do truck tailgate & bed accessories help MPG?
Is MPG significantly affected by tire inflation?
Which gear is best when climbing grades?
Which speed delivers optimal MPG?
Does engine braking use more fuel?
Does MPG change based on altitude?
Although dangerous, does drafting really help?
and many more....
With UltraGauge it’s instant and easy!

Unlike MPG gauges found in high-end vehicles, UltraGauge is not limited to displaying a maximum of 99 MPG, UltraGauge displays up to 999 MPG.

Alarms
UltraGauge features fully configurable alarms for every gauge. Both low and high alarms may be set and the trigger value of each alarm is completely configurable.

UltraGauge continually compares real-time gauge values against configured alarm values. If the alarm thresholds have been exceeded, an audio and visual alarm will occur. The alarm window will display the set value and the current value. While the alarm is occurring, the particular alarm may be easily suspended and will no longer trigger for the remainder of the current driving cycle.

The alarm siren may also be disabled to provide only visual alarms. Alarms may also be globally disabled so that both visual and audible alarms are disabled.

An alarm may also be assigned to trouble codes or pending codes. Should a trouble code or pending code become posted while driving, an alarm immediately occurs. This can aid in the diagnosis of intermittent problems.

[wsmeyer]

It looks cool and price is certainly right. I'll have to check that out when you're in LA.

That kind of thing is why I keep thinking about the Android based NAV units so I could run the torque app

[WOLFN8TR]

It looks cool and price is certainly right. I'll have to check that out when you're in LA.

That kind of thing is why I keep thinking about the Android based NAV units so I could run the torque app

Sounds Good, ya for the price it's pretty cool.

[LivesNearCostco]

Will it report oil temp or oil pressure?

[WOLFN8TR]

Will it report oil temp or oil pressure?

No it doesn't.

[LivesNearCostco]

I suppose either OBD II doesn't offer that info? Still this would display coolant temp and voltage, two of the items a traditional gauge set would show. This could be an alternative to Coolant Snitch, or combine this with the LeatherZ gauge package. The intake air temp would be interesting--could use that to see if the aFe air scoops lower air temp. The MAF output could be used to show how much extra airflow from a BMW or aFe intake vs. stock.

[WOLFN8TR]

I do believe the difference is year dependent. Earlier OBDII models can only give certain parameters. I have the Edge Insight CTS on my 2008 Duramax and it will display Oil Temp and Pressure. I was wanting to get one for the BMW but it's size was an issue. The only place to mount it is up on the dash with a suction cup windshield mount.
http://www.edgeproducts.com/product.php?pk=145&pvk=405 (http://www.edgeproducts.com/product.php?pk=145&pvk=405)


UltraGauge supports the gauges described here:
http://www.ultra-gauge.com/ultragauge/TEN/gauges.htm (http://www.ultra-gauge.com/ultragauge/TEN/gauges.htm)

However, the actual gauges available to UltraGauge is vehicle dependent. The available gauges vary based on Year, Make, Model, Engine Size and sometimes even based on the transmission. For example, a 2004 Ford Mustang with a V6 may support different gauges than a 2004 Ford Mustang with a V8. Unfortunately there is no way to know which gauges are truly supported without physically attaching UltraGauge and discovering the available gauges. However, Gauges such as MPH, RPM, Intake Air Temperature, Coolant Temperature, distance gauges, Run Time Gauges, and Mileage gauges are commonly supported.

In an effort to help alleviate this issue, we have provided a Vehicle Gauge Availability Estimator. Please read the important information contained on the estimator page before use. The estimator can be found here:
http://ultra-gauge.com/ultragauge/support/gaugelookup.php (http://ultra-gauge.com/ultragauge/support/gaugelookup.php)

OBDII:
J1850 VPM Early GM & Chrysler
Ford Early Ford
9141-Early Chrysler / Foreign
KWP 2000 Rare, various
11-bit CAN Most 2008 and newer
29-bit CAN Most 2008 and newer Honda & Volvo

9141 was found when plugged in to my car, 48 out of the 76 gauges available.

[LivesNearCostco]

thanks, Wolf man!

[johnrando]

Good info Gary!

[Washburn]

Seems to be a nice unit - gonna read up some more...

One big advantage of the competitor "scan guage II" vs the UG that I noticed is the size of the SG II is very slim, and the display color can be changed to match any car's dash illumination (a whopping 63 different colors!)
...if UG had THAT feature, for the price it will be a HUGE winner...

SG II is a lot more expensive though...

[WOLFN8TR]

Good info Gary!

Thanks...


Seems to be a nice unit - gonna read up some more...

One big advantage of the competitor "scan guage II" vs the UG that I noticed is the size of the SG II is very slim, and the display color can be changed to match any car's dash illumination (a whopping 63 different colors!)
...if UG had THAT feature, for the price it will be a HUGE winner...

SG II is a lot more expensive though...

Ageed. There are two different ScanGauge's available, one is $100 and the other is $170. Reading up on them they are more geared towards fuel mileage efficiency. They do not monitor nearly as many parameters. Click on the Cooling Fan & OBDII Monitor in my sig for more info.

[WOLFN8TR]

One big advantage of the competitor "scan guage II" vs the UG that I noticed is the size of the SG II is very slim, and the display color can be changed to match any car's dash illumination (a whopping 63 different colors!)
...if UG had THAT feature, for the price it will be a HUGE winner...

Introducing the WOLFN8TR Special Edition! Oh Ya...

8041

8042

8043

[Washburn]

:D How did you do THAT? are other colors possible? did you put some colored film over it ? ;)
EDIT:

Busted: :)
http://www.tacomaworld.com/forum/performance-tuning/136872-how-change-display-color-your-ultra-gauge.html

[danewilson77]

:D How did you do THAT? are other colors possible? did you put some colored film over it ? ;)
EDIT:

Busted: :)
http://www.tacomaworld.com/forum/performance-tuning/136872-how-change-display-color-your-ultra-gauge.html

:rofl

HTC DNA, Williamsburg, VA

[WOLFN8TR]

Oh cool. I actually used color lens film for stage lighting. I used two pieces so it would be the correct Orange color.

[Washburn]

Ha! Thanks - do you have a link to where you got that film?
any problem with reflections?
I wonder how a RED film might look...

This makes the UG a lot more inviting now...

[WOLFN8TR]

I got it from a buddy of mine that is a stage hand. They have several different shades of Orange and Red. I had to use two Orange sheets as one just wasn't dark enough. Red might be perfect. I have plenty of the Orange left I could send it to ya. Or get some Red.

I used a business card cut down to size as a template. Then tapped the card to the colored sheet and cut it out approx 1/8" larger all the way around.

8052

[cakM3]

Interesting review Gary! Thanks!

[WOLFN8TR]

Interesting review Gary! Thanks!

No Problamo...

[Washburn]

This really might be my next toy...
Gary: can you give some more details on exactly how you mounted yours in front of the shifter?
Thanks!

[WOLFN8TR]

This really might be my next toy...
Gary: can you give some more details on exactly how you mounted yours in front of the shifter?
Thanks!

- Remove the shift knob.
( Put the gear selector in Neutral, car off E brake on. Grab the knob and yank up REALLY hard. Don't break the Sunroof ).
- Remove the shift boot.
- Remove the console piece, bezel I suppose?
- Flip over the bezel and approx 1" from the corner I used a rasp file (round) and filed a grove large enough for the cable.
( When you do this file down away from the top otherwise it catches the aluminum trim. Make sure it's where you want it. On mine the grove is just to the left of the long plastic inner edge. I also had to slightly file the face of the ashtray lip, it's under the bezel out of sight).
- Route the cable with the plug end down thru the side of the center console. This is tricky because the plug is huge, I used a small pry bar to help get it thru.
- Route it up underneath the dash and use a drill or the round file and cut a grove in the cover close to the OBDII port.

[cakM3]

Gary.... I'm interested in this now....dammit! ;)

[WOLFN8TR]

8099

[Washburn]

Yeesh Gary that seems more involved than I thought to install it like that
I might just have to be content with the cable being visible or think of some other way to install it
Thanks a bunch for the great info and tips though ...

[WOLFN8TR]

Welcome...It really was't hard to do except removing the shift knob.

There are several other ways to mount it. Check it out.
http://ultra-gauge.com/ultragauge/support/Mounting_Options.html

[WOLFN8TR]

I swapped out the 2 orange ones I had for a Red one. It actually matches perfect now!

8110

8111

8112

Here is the cable routed under the trim.

8113

[danewilson77]

Pretty close. Nice work!

HTC DNA, Williamsburg, VA

[WOLFN8TR]

Pretty close. Nice work!

HTC DNA, Williamsburg, VA

Pretty Close? Geez...

It's not a exact match but I'm happy with it. I think it would look good in a Imola ZHP.

[danewilson77]

Pretty Close? Geez...

It's not a exact match but I'm happy with it. I think it would look good in a Imola ZHP.

No man. It looks really good. Thanks for taking the time to share your thoughts, do the work and research, and share it with us.

I'm sure I'll pick one of these up.

HTC DNA, Williamsburg, VA

[Washburn]

Looks great, the red! was it lens film from your friend again, or something different?
I want to have THAT exact film, (lol) because i like it that much - I'd gladly pay for shipping if you have some left. OR if you can point me to the exact thing with a link, I'd be set :)

[WOLFN8TR]

No man. It looks really good. Thanks for taking the time to share your thoughts, do the work and research, and share it with us.
I'm sure I'll pick one of these up.

Thanks and your welcome. I've got several compliments on it so far from guys at work.


Looks great, the red! was it lens film from your friend again, or something different?
I want to have THAT exact film, (lol) because i like it that much - I'd gladly pay for shipping if you have some left. OR if you can point me to the exact thing with a link, I'd be set :)

Ya he gave me R22 last time (orange) and this one is R25 (red). The Red one is also a tad thicker so it doesn't bind up easy when trying to slip it under the edges. The sheet he gave me was used so it has a few blemishes on it. There is enough on one sheet to do about 8 screens. I will try and get a new one from him.

Just let me know who needs some R25 (red) and I will mail it out for Free!

R22 vs R25
The R22 is doubled up.
http://img.tapatalk.com/d/13/04/26/jydezy4u.jpg

[Washburn]

PMd for some red :)

[Oli77]

This is looking like an awesome product. I like the alarm function a lot. Ever since my temp gauge started reading BS 30% of the time, doing the OBC 19.7.0 while driving is a pain.

Thanks for the info.

[WOLFN8TR]

PMd for some red :)

Replied....

Let me know if you want a DIY Video on the install. I can take it apart pretty easy now knowing the steps needed.


This is looking like an awesome product. I like the alarm function a lot. Ever since my temp gauge started reading BS 30% of the time, doing the OBC 19.7.0 while driving is a pain.

Thanks for the info.

Your Welcome. Exactly why I bought it. For the money you really can't go wrong. Plus it now matches the dash!

BTW- The unit is $69 plus $8 shipping. There is a $9 mail in rebate available but I've read it's a PITA so I didn't bother with it. The addition mount was $8 which I didn't even use.

[jgt_zhp]

WOLFN8TR, thanks for all the leg work and detail on this. Ultraguage really plays in to my inner geek... going to order one today. Maybe tomorrow. I've had this car a couple weeks, and I'm already at the point where I think through delivery schedules so I don't get caught with too many packages on the porch. :shifty

I'll probably hit you up on that red film. Stuff's gotta match, right?

[WOLFN8TR]

No Problem. I'm working on getting a few Red sheets, should be enough to do quite a few UltraGauge screens.

If you guys want a DIY video of the install I did let me know.

[Washburn]

This is indeed very kind of you

Although I may not follow the same install path you did, I am sure an install video would be appreciated by the brave and fearless here.
... Who knows? Even I might be tempted :)

[Washburn]

Random question :
One can leave the UG plugged in permanently, right ?
The obd II port powers itself down after turning the car off?

[WOLFN8TR]

Random question :
One can leave the UG plugged in permanently, right ?
The obd II port powers itself down after turning the car off?

Correct.

[WOLFN8TR]

Ok I just scored a bunch a New Red R25 film! For those of you that are interested in the UltraGauge and want it to match the BMW dash lights here it is! I will send you enough film to make 4 for the UG for FREE!

Paging Charlie. Ya know you want to add another Mod to your ///M and ZHP!!

8121

[MKSD03ZHP]

Obviously this is not a GROUP BUY thread, however I am sincerely interested in this product, and it seems like others are as well. I went to UG's website and found this here: http://www.ultra-gauge.com/ultragauge/support/FAQ.htm

Group buy Discounts?

Although UltraGauge is offered to the public at wholesale pricing, we do offer volume discounts primarily for automotive forum group buys.
Discounts are offered for group purchases of 50 & 100+. All previous forum group buys have easily exceeded 150 units.
It does require that a member of the forum take the responsibility to gauge preliminary interest, and then manage the overall group buy at the forum end. Note that all shipments are sent to the individual forum members and not as one large shipment.
If you are interested in managing a group buy for your forum and would like to learn more, please create a support ticket and request more information: Support Ticket

I mean - it's a relatively inexpensive unit, however if enough members were interested, this could potentially work.

Just providing the information in case anyone wanted to orchestrate something of this nature down the road.

Steve

[danewilson77]

Steve, are you associated with Ultra-gauge?

[pfr]

Obviously this is not a GROUP BUY thread, however I am sincerely interested in this product, and it seems like others are as well. I went to UG's website and found this here: http://www.ultra-gauge.com/ultragauge/support/FAQ.htm

Group buy Discounts?

Although UltraGauge is offered to the public at wholesale pricing, we do offer volume discounts primarily for automotive forum group buys.
Discounts are offered for group purchases of 50 & 100+. All previous forum group buys have easily exceeded 150 units.
It does require that a member of the forum take the responsibility to gauge preliminary interest, and then manage the overall group buy at the forum end. Note that all shipments are sent to the individual forum members and not as one large shipment.
If you are interested in managing a group buy for your forum and would like to learn more, please create a support ticket and request more information: Support Ticket

I mean - it's a relatively inexpensive unit, however if enough members were interested, this could potentially work.

Just providing the information in case anyone wanted to orchestrate something of this nature down the road.

Steve

Thinking about getting it - if there is a group buy I'd certainly would like in. (will not be able to log in for a week though - can't get in from Europe?)

thanks
Peter

[LivesNearCostco]

What do the Europeans have against the ZHP mafia!? Jealous that the ZHP was never sold in EMEA? :hawaiian

I might be interested in a group buy. Need some way to monitor coolant temp besides the OBC unlock function. On other hand still thinking about the LeatherZ gauges so I can get oil temp and oil pressure.

[Washburn]

I will be definitely in for a group buy.

[WOLFN8TR]

The discount isn't really worth it. I seen a group buy on another site before posting this review and it was around $8 but you have to sell at least 50. Also the $9 rebate they offer is a PITA so many do not even deal with it.

[pfr]

What do the Europeans have against the ZHP mafia!? Jealous that the ZHP was never sold in EMEA? .

Actually the message seemed to have come from the forum. But whatever it was, it is not there any more. I'm in.

[MKSD03ZHP]

Steve, are you associated with Ultra-gauge?

Dane,

No I am not - I just went to their website to research the product and saw that they offered the opportunity of a GB - thought members might like to know..... but it sounds like it's marginal, and I figured it would be, given the market price of the product - only so much room to discount.

- Steve

[danewilson77]

Dane,

No I am not - I just went to their website to research the product and saw that they offered the opportunity of a GB - thought members might like to know..... but it sounds like it's marginal, and I figured it would be, given the market price of the product - only so much room to discount.

- Steve

Ok. Thanks Steve.

HTC DNA, Williamsburg, VA

[Crestwood1001]

Gary if you make a DIY on how to install the film, you should make a vid showing some of the functions in an e46, theres lots online but it would be nice to see a quality video of what it can do in our cars.:thumbsup

[WOLFN8TR]

That's a good idea. I will do one for the Flim, Functions and the Ultra Gauge install.


Gary

[BimmerWill]

Awesome looking setup. I'm going to add this to future purchase list :)

Sent from my DROID RAZR using Tapatalk 2

[ryankokesh]

Doh. Another thing to add to my amazon wish list, lol.

Great write-up!

[WOLFN8TR]

Doh. Another thing to add to my amazon wish list, lol.

Great write-up!

Amazon doesn't carry it. Go to Ultra-Gauge.com to order.

[ryankokesh]

I just keep stuff there. You can add anything :)

http://i.imgur.com/rCKH6Vf.png

[WOLFN8TR]

Cool, I couldn't find it before I bought mine. How much is shipping?

[MKSD03ZHP]

Gary,

My brother purchased one for his car after hearing how highly people thought of it, and I am purchasing mine this weekend. Looking forward to putting that film on it to make it similar to the BMW look - thanks man!

Will keep members posted as to feedback, etc.

Steve

[WOLFN8TR]

Your Welcome Steve. Let me know if he needs some Red film.

I recently did my entire cooling system and the Ultra Gauge came in handy for watching the cooling temp. Set the alarm for 205 degrees as a precaution while bleeding the system. Really happy with it.


Gary

[johnrando]

Gary, do you have an "overview" pic of the install, which includes the gauge, the cable under the trim piece, etc?

[bullfrogs_M3]

Gary, do you have an "overview" pic of the install, which includes the gauge, the cable under the trim piece, etc?

+1. I have mine sitting in my garage and would love to see some install pics/options

[WOLFN8TR]

I will do DIY Videos for the Flim, Functions and the Ultra Gauge install.

I will do the Videos this weekend.

Here are some photos...

8924

8925

8926

8927

8928



Gary

[Washburn]

Gary,
What's a good range to set the coolant temp alarm to ?
what range do you have it on?

[WOLFN8TR]

Gary,
What's a good range to set the coolant temp alarm to ?
what range do you have it on?

I have it set at 210, it's a tad low but I prefer a early warning rather than almost too late. The operating range of our cars is approx 88-96 Celcius or 190-205 Fahrenheit.

[Washburn]

Makes sense. Thanks, Gary. Does one need a LOW alarm too?

[WOLFN8TR]

I wouldn't see a need for it unless you live somewhere REALLY Cold.


Gary

[Washburn]

But what if the thermostat stuck open ? :O

[ryankokesh]

Makes sense. Thanks, Gary. Does one need a LOW alarm too?

Low alarm for oil temp would be nice... Like if it could go off with low temp at a certain rpm to keep you from overdoing it. :dunno


Sent from my iPhone using Tapatalk

[WOLFN8TR]

Added info on how to install the Red Film and a video on installing the UltraGauge. All posted on the first page!


http://www.youtube.com/watch?v=dbZnFZ0wJPA

[Washburn]

Neat!

[BimmerWill]

Will be ordering this tonight. Does anyone know where I can get some of the film for the screen to match up?

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

WOLFN8TR has the Red Film...


Gary

[Washburn]

I got mine from WOLFN8TR - very generous guy :) I think he's the one who posted right above me.

[ryankokesh]

If you guys ever run out, I think the stuff's called Rubylith - was used in darkrooms back in the day I believe. I had it on the Apple logo of my laptop for a while... :)

http://www.ebay.com/itm/Rubylith-1-sheet-5-x-7-x-005-Red-/221236905292?pt=LH_DefaultDomain_0&hash=item3382bf454c

[WOLFN8TR]

That looks the same but what shade of Red is it? I tried several shades before getting the right one to match the dash lights, there is alot. Plus I have it for Free! Thanks for the info.

Just let me know who needs some Red (R25).

[ryankokesh]

Oh cool, I didn't know there were different shades!


Sent from my iPhone using Tapatalk

[BimmerWill]

Ordered this morning. Got both the windshield and Velcro mount as I'm not sure where I want it exactly. I'm thinking in the left hand corner beside the cluster. I usually keep my iPod where gary has his and would like to retain function of the cigarette lighter.

Does the unit sense when the lights are turned on to dim the display or is that manual?

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Sweet! Feedback once you get it installed.

The lights are Auto dimming and there is a setting for this also, contrast and brightness.

I sent the Red film out today. I cut them to fit. Just slide them under the Ultra Gauge face and your good.


Gary

[BimmerWill]

Sweet! Feedback once you get it installed.

The lights are Auto dimming and there is a setting for this also, contrast and brightness.

I sent the Red film out today. I cut them to fit. Just slide them under the Ultra Gauge face and your good.


Gary

You're the man!! Looking like I'll have them early next week sometime.

Sent from my DROID RAZR using Tapatalk 2

[ryankokesh]

Has anyone mounted this near the driver's left vent? Would love to see any mounting pics, actually!

[BimmerWill]

Has anyone mounted this near the driver's left vent? Would love to see any mounting pics, actually!

I'm hoping to get mine close to that area with the windshield mount. Not sure exactly how much length I'll be playing with though. May end up fabricating something to suit where I'd like it.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Has anyone mounted this near the driver's left vent? Would love to see any mounting pics, actually!


I'm hoping to get mine close to that area with the windshield mount. Not sure exactly how much length I'll be playing with though. May end up fabricating something to suit where I'd like it.

I purchased the windshield mount and was intending on mounting it above the left vent. It's perfectly visible there and the length is good but I didn't like the look. You can really see the suction cup from the outside and it clutters up the clean dash. So I tried to find a area to use the velcro mount. There is two areas on the dash trim to the left and right of the steering wheel that would work. The only problem is the steering wheel blocks the view, you have to lean to the side to see it. Also to access the 3 buttons on the back you would have to remove it. You could 3M tape it to the dash and as long as the tape isn't too thick the buttons would work by pressing on the front corners of the unit. I can do this where mine sits on the ash tray, tricky but it does work. I thought about using the standard swivel mount and screwing it to the homelink cover but routing the cable would be a bitch because of the large OBII plug on the end.

[ryankokesh]

Would something like this work?
http://www.kenu.com/products/airframe


Sent from my iPhone using Tapatalk

[WOLFN8TR]

Ya that should work, the Ultra Gauge is 3.5" wide. That's a cool mount, I just ordered one for the wife's car, $25 and Free shipping. Thanks for the link!

[BimmerWill]

That's pretty cool. I may give that a shot if my idea doesn't work out.

Sent from my DROID RAZR using Tapatalk 2

[BimmerWill]

I want to try and minimize taking up of viewing space from the windshield while retaining a decent line of sight to the Ultragauge while driving. I'm thinking right in the nook between the A pillar and the bubble for cluster. Kind of like the gauge pods you see so often only not quite so ricer ;)

Sent from my DROID RAZR using Tapatalk 2

[johnrando]

Gary, definitely let me know how your like Airframe, that's cool. I just might give up my Bimmian mount for that if it works.

[WOLFN8TR]

Will do...

[Washburn]

So the air frame and the UG will be both in a horizontal position, right? The UG cable is connected sideways, but I think the AF should still be able to grip it without the cable being in the way...
or are we thinking of using the AF in vertical position, gripping the UG from top and bottom and not from the sides?

would LOVE to see some pics (esp. how much the AF and UG will block the vent) if someone installs the UG with the AF -
I hate blocking a vent, but it looks like very little of the vent is blocked by the AF/UG...

found this (rather useless) Youtube review:


http://www.youtube.com/watch?v=kTw8T7Nd7-M

[WOLFN8TR]

Yes Horizontal but I would imagine either way with the AF. I will play around with it and take some photos when I get it.

[Washburn]

Looking forward to it, Gary -
I think you deserve the letters R.U.G.C/E. behind your name, for Resident Ultra-Gauge Consultant/Expert :)

[BavarianZHP]

Damn. Why do I get the feeling ZHP modding will never, ever end for me... I gotta have one of these now.

[johnrando]

Because it won't.

:mwah

[BimmerWill]

Keeps things exciting :) I'm all giggly about this gadget lol

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Looking forward to it, Gary -
I think you deserve the letters R.U.G.C/E. behind your name, for Resident Ultra-Gauge Consultant/Expert :)

Ha Ha...That's kinda catchy. How about U.G.G. "Ultra Gauge Guru".


Damn. Why do I get the feeling ZHP modding will never, ever end for me... I gotta have one of these now.

Man this little gauge is cool the more I use it the more I like it. Especially when I did my entire cooling system it was so nice seeing the actual cooling temp in Fahrenheit and having a alarm set just incase. BTW my ZHP runs at 192.2 while cruising on the freeway.


Keeps things exciting :) I'm all giggly about this gadget lol.

Did you get it yet? Installed?

[BimmerWill]

Nope. It shipped out today though. Probably get it midweek or so.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Got the AF today, quality little mount. I gave it to my wife and it works good in her 4Rumner. Her vents are flat so her iPhone sits fairly flush. On my BMW it sticks out to far because of the curvature of the vent, didn't really like it. It just seemed to high up compared to the Bimmian mount.

9260

9261

It will not work with the Ultra Gauge. It doesn't open up far enough to fit horizontal. Vertical position it's too big (fits very loose). See photos below.

Horizontal
9257

Vertical
9258

Wife's
9259

[Washburn]

Thanks for the update, UGG! :)

[WOLFN8TR]

Thanks for the update, UGG! :)

Welcome? Bummer it didn't fit the Ultra Gauge.

"U.G.G."

[johnrando]

Thanks for the review Gary. Guess I won't be getting one for my zhp. Glad it works on your wife's vehicle.

[BimmerWill]

Its waiting in the mail for me at home. Feel all giddy lol

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Thanks for the review Gary. Guess I won't be getting one for my zhp. Glad it works on your wife's vehicle.

No Prob...


Its waiting in the mail for me at home. Feel all giddy lol.

Sweet!

[BimmerWill]

Color turned out perfect Gary! I could play with the settings on this thing for hours but alas work comes early at 530 in the morning lol. Will probably go out on lunch break tomorrow and mess with it lol

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Glad your happy with the color, tried to match it a close as possible. It took me a few days to get comfortable with the Ultra Gauge, once you do it's pretty easy. Don't forget to set the alarms. BTW do not set a low fuel alarm! It will beep every minute and drive you nuts! The coolant alarm was the main reason I bought this unit. I have mine set to 210 degrees. Let me know what temp your car runs at on the freeway, curious if its the same or not. I get 192.2 degrees.

What camera did you use to take that photo?

I have you beat on the work time, I'm clocking in at 4:50am, up at 3:30! It Sucks!

[BimmerWill]

Man that is early!!

I just used the camera on my phone and turned the exposure up in order to get the lights to show up. Color is spot on! Is it still pretty visible during the day with the colored film over it? Seems to have brought the brightness down some at night. Which I'm not complaining at all due to at stock its a little too bright for my tastes driving at night.

For some reason my car is continuing to throw a P1620 code. Which I believe has to do with the thermostat but it has always stayed rock solid in the middle since I replaced it last year or so. I had to disable pending and fault code alarms for that reason. I haven't decided on the coolant alarm yet but will do so tomorrow morning after my drive to work. Also noticed it doesn't seem to be able to detect my fuel level so I have to manually put in when I fill up. Other than that I am very happy with this little rig.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

The UG doesn't detect the fuel level, bummer. Basically you tell the UG what size tank you have (which is I believe 16.6) then when you fill up just enter that under the fuel management as a "Full fill up" and it will adjust.

Have you checked your speedometer compared to the UG yet? For some reason the UG isn't even close to what my speedometer reads.

[BimmerWill]

I haven't tried it yet but will soon enough. I'm trying to figure out this bhp gauge it lists. It says horsepower but I'm not sure how its supposed to actually be able to gauge that. Has both bhp 1&2 and torque 1&2

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

That's the one issue I have with the UG is the owners manual, it doesn't explain these settings in detail at all.

[BimmerWill]

I did a slight pull this morning with that gauge running and it only got up to around 70 or so from what I remember. The torque went up to around 125 though at 2500-3k rpm. Its weird lol. I do wish the refresh rate on it was faster though.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Will how is the UltraGauge?

[BimmerWill]

Its doing great so far. My opinion on it hasn't changed much since I put it on the first day but I'm pretty happy with it.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Sweet! I really like being able to monitor the coolant temp and have an alarm on it. Last week our temps were 117 for 4 days! It came in handy then.

[BimmerWill]

I can imagine! So far mine has been holding steady at 194.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Nice, good to know our readings are pretty close.

[BimmerWill]

It has gotten to 203 on occasion but that's if I'm running a little harder. Drops back down in just a few seconds.

Sent from my DROID RAZR using Tapatalk 2

[WOLFN8TR]

Same here.

[WOLFN8TR]

BUMP for New Peeps...

[BimmerWill]

I've noticed she's been running warmer lately and I'm not sure why. Here lately stays at 203 instead of the initial 199.4 not a major difference but it is making me nervous.

Sent from S4

[WOLFN8TR]

Hmmm? I'm always at 192.2, when we had our heat wave of 118 for 6 days straight I hit 195.

[BimmerWill]

Its possible my thermostat is going a little wonky. I've had soft codes for it for quite a while but it always held stay so I didn't mess with it. Hasn't been that long since it says replaced either.

Sent from S4

[Stewbie]

Just placed my order! WOLFN8TR are you still offering the film strips?

[WOLFN8TR]

Just placed my order! WOLFN8TR are you still offering the film strips?

Yes Yes Ofcourse...

PM Me your address and I will send them to ya.

[Stewbie]

Got my Ultragauge yesterday and installed it today. I went with the windshield suction cup and arm mount. The arm is actually quite stiff so you can't bend it while the suction cup is attached. Its more like bend, hold up to windshield, figure out the next bend you need, take down, bend some more, etc.

Now I just gotta spend some time with the manual figuring out what all the different gauge options mean and which ones I want.

I had my car into the shop just two weeks ago and they said there was no codes. But when I hook up my ultragauge, its telling me I've got a code P0461. According to this website http://www.cardiffspecialists.co.uk/tabid/82/BMW-OBD-Codes/P0461/Diagnostics/BMW/Default.aspx , this code has something to do with the fuel level sensor. This makes sense as my fuel gauge went wonky about 6 months after I bought the car. I have to rely on the trip meter to know when to put gas in the car.

The other interesting thing is that on the initial hook up the Ultragauge detected one protocol, but every other time its detected the 9141 Protocol. Is this the same one that everybody else is getting?

[WOLFN8TR]

Cool...

You got a Manual?? I never got one, can you possibly post up a page showing what all those options mean?

I get the same Protocol "9141" upon start up. Did you get the Red film?

[Stewbie]

Cool...

You got a Manual?? I never got one, can you possibly post up a page showing what all those options mean?

I get the same Protocol "9141" upon start up. Did you get the Red film?

In the box was a notice telling you to go to the Start (http://www.ultra-gauge.com/start/) page. When you do, it walks you through some educational info, which includes a link to the Manual (http://ultra-gauge.com/ultragauge/support/UltraGauge_user_manuals.htm). This is also how you complete the paperwork for the "reward".

Red film has not arrived yet, but since it has to cross the border I expect it to take a week or two. I'll let you know when it arrives.

[WOLFN8TR]

Start page on the UG....Hmmm? Ya I never even bothered with the Reward so maybe thats why I missed it. I sent the film out last Monday.


UltraGauge supports the gauges described here:
http://www.ultra-gauge.com/ultragauge/TEN/gauges.htm (http://www.ultra-gauge.com/ultragauge/TEN/gauges.htm)

However, the actual gauges available to UltraGauge is vehicle dependent. The available gauges vary based on Year, Make, Model, Engine Size and sometimes even based on the transmission. For example, a 2004 Ford Mustang with a V6 may support different gauges than a 2004 Ford Mustang with a V8. Unfortunately there is no way to know which gauges are truly supported without physically attaching UltraGauge and discovering the available gauges. However, Gauges such as MPH, RPM, Intake Air Temperature, Coolant Temperature, distance gauges, Run Time Gauges, and Mileage gauges are commonly supported.

In an effort to help alleviate this issue, we have provided a Vehicle Gauge Availability Estimator. Please read the important information contained on the estimator page before use. The estimator can be found here:
http://ultra-gauge.com/ultragauge/support/gaugelookup.php (http://ultra-gauge.com/ultragauge/support/gaugelookup.php)

OBDII:
J1850 VPM Early GM & Chrysler
Ford Early Ford
9141-Early Chrysler / Foreign
KWP 2000 Rare, various
11-bit CAN Most 2008 and newer
29-bit CAN Most 2008 and newer Honda & Volvo

9141 was found when plugged in to my car, 48 out of the 76 gauges available.

[Stewbie]

9141 was found when plugged in to my car, 48 out of the 76 gauges available.

Interesting, I got 46 of 79 gauges. My UG is Version EM1.2 (Oct 1, 2012) and my ZHP is a May 2004 production date.

[Stewbie]

Did you get the Red film?

The film strip arrived in today's mail. Thanks a lot for sending it to me!

Here's a befoe photo:

http://i1254.photobucket.com/albums/hh619/Stewbie2000/IMG_20130909_155154_zps5b79a2cb.jpg (http://s1254.photobucket.com/user/Stewbie2000/media/IMG_20130909_155154_zps5b79a2cb.jpg.html)

And here's the after photo:

http://i1254.photobucket.com/albums/hh619/Stewbie2000/IMG_20130909_202600_zpsafee8588.jpg (http://s1254.photobucket.com/user/Stewbie2000/media/IMG_20130909_202600_zpsafee8588.jpg.html)

When I first put the film on it, the brightness was very dim, so I went in and changed the 'min backlight brightness' setting to get it to the level shown in the picture.

[SureShot434]

I want one now lol

[WOLFN8TR]

Looks Great, glad to hear the film finally arrived. Man that took forever getting there.

[Hermes]

Gary, any chance you have any more of that film? I need it for my E21...

[WOLFN8TR]

Yes Sir. Do you need it for the UltraGauge?

[Hermes]

No, I need it for the instrument cluster on the E21

http://img.tapatalk.com/d/14/01/12/a5epanun.jpg

I don't need much

[WOLFN8TR]

Just measure what you need and I will send you some.

[Hermes]

Cool, thanks! I'll send you a message

[WOLFN8TR]

10/4...

[stephenkirsh]

So I'm thinking about getting one. For gels, I was going to pul a red out of my tosco gel pack I use for my photo lights.

$3 for a whole pack. Overkill since you don't need all the other colors, but it's an alternative on the cheap!

http://www.amazon.com/Rosco-Lux-Small-Swatchbook/dp/B0002ER2YG/ref=sr_1_4?ie=UTF8&qid=1390023267&sr=8-4&keywords=rosco+gel

[WOLFN8TR]

That's cheap for all those colors! Nice find.

[WOLFN8TR]

Bump...

The UltraGauge came in handy yesterday. The temp was around 114 degrees and the audible alarm I have set at 210 went off twice! Best $60 I've spent for piece of mind.

[stephenkirsh]

So what'd you do when it hit 210?

[WOLFN8TR]

So what'd you do when it hit 210?

Turned off the AC beings I was sitting in traffic. Temps dropped back down under 200.

[rguti153]

Awesome

Sent from my SCH-I545 using Tapatalk

[Oli77]

Putting on of those on my Christmas list. Thanks for the reminder.

[BimmerWill]

They really are an awesome deal for what you get with them. I love mine.

[johnrando]

Nice Gary.

[WOLFN8TR]

It's funny I use to look at the temp display all the time when I did my fan swap last summer and this year I really don't much. When the alarm went off it was a reminder to pay attention to the temps when it's 114 outside! This is well worth the money when my wife drives the car as she will not be as aware of the coolant temps as I'am.

[stephenkirsh]

I thought about getting the gauge but now I just turn on the OBC temp display when doing long/hard drives.

Maybe I'll get the gauge some day, as I know there's other useful things too. Like an alarm!

[CarbonZHP]

In love with this gauge. Really helped when I lost the fan belt and had to periodically run the car to get it towed and moved around the dealership. Its also great to see the intake air temp and its effects on the air density

[SoCalZman]

I thought about getting the gauge but now I just turn on the OBC temp display when doing long/hard drives.

Maybe I'll get the gauge some day, as I know there's other useful things too. Like an alarm!

Have you thought about just reprogramming your temp guage so its shows the actual temp instead of a huge buffer that starts to budge when the car is already overheating?

[WOLFN8TR]

Totally! The other day when it was 114 here my IAT was 163 and coolant temp was 208 sitting in traffic. My alarm is set at 210, it went off and I shut the AC off untill the temp went under 200. Love it!

[CarbonZHP]

Have you thought about just reprogramming your temp guage so its shows the actual temp instead of a huge buffer that starts to budge when the car is already overheating?

Wayy ahead of you ;)

[stephenkirsh]

Have you thought about just reprogramming your temp guage so its shows the actual temp instead of a huge buffer that starts to budge when the car is already overheating?

Nah. Maybe at a meet or something, but it's not high on my list. I like being able to read the temp exactly.

[CarbonZHP]

Nah. Maybe at a meet or something, but it's not high on my list. I like being able to read the temp exactly.

Read the temp exactly? Than fix the gauge. Stock the buffer for dead center is 75-115C. Thats useless. Mine right now is 90-100C

[SoCalZman]

Right. With the updated temp gauge I now don't bother going into the temp display on the dash. http://img.tapatalk.com/d/14/08/01/amejuduq.jpg

[CarbonZHP]

Im even considering going a step further to make it completely linear. The code is a bit different on 04 cars though.

[CarbonZHP]

Hey wolf, anywhere we can find the film now?

[WOLFN8TR]

I have some...

[CarbonZHP]

If possible Id like to grab one please

[WOLFN8TR]

Sure just PM your address and I will send some to ya.

[Oli77]

Save me a piece Wolf please. I am definitely getting one of those OBD gauges around Christmas time.

[WOLFN8TR]

Save me a piece Wolf please. I am definitely getting one of those OBD gauges around Christmas time.

You bet...:thumbsup

[bullfrogs_M3]

Hey Wolf, wondering if you have anymore of those red sheets left? I am not sure which one to get off amazon.

[danewilson77]

Hey Wolf, wondering if you have anymore of those red sheets left? I am not sure which one to get off amazon.

Jeremiah?

The friendliest forum on the planet.

[bullfrogs_M3]

Yea i know, i've been MIA for a while. Work, family, life, etc.... Try to get on the forums more now though

[WOLFN8TR]

Hey Wolf, wondering if you have anymore of those red sheets left? I am not sure which one to get off amazon.

Yes I do. PM me your address and I will send you some. The Red film color is R25.

"I will try and send these all out by Wednesday".

[CarbonZHP]

<3 You Wolf
http://i160.photobucket.com/albums/t187/littletwerpy/2014-08-16201015_zps19dcb9e6.jpg (http://s160.photobucket.com/user/littletwerpy/media/2014-08-16201015_zps19dcb9e6.jpg.html)

[OtterEffect]

Hey nice mounting spot ;)
Thanks again, Gary
http://tapatalk.imageshack.com/v2/14/08/16/4cfd5b79167c3bfb68865dbeaaef72ee.jpg


Sent from my potato using Tapatalk

[WOLFN8TR]

Welcome...

Looks Great guys! :thumbsup

[CarbonZHP]

Think I need to remove mine. Visibility during the day is near none

[rguti153]

To bright outside or is dimming

[WOLFN8TR]

Think I need to remove mine. Visibility during the day is near none

Put it here!


http://www.youtube.com/watch?v=dbZnFZ0wJPA

[rguti153]

Project underway but look how it glows disassembled http://tapatalk.imageshack.com/v2/14/08/29/185e0cda76fe4f89828a04763396a7aa.jpghttp://tapatalk.imageshack.com/v2/14/08/29/1f9cda0baaec16b865e0b71fc74e513f.jpg

[OtterEffect]

Project underway but look how it glows disassembled http://tapatalk.imageshack.com/v2/14/08/29/185e0cda76fe4f89828a04763396a7aa.jpghttp://tapatalk.imageshack.com/v2/14/08/29/1f9cda0baaec16b865e0b71fc74e513f.jpg

I think you and I had a similar idea.. Difference is you are actually doing it :p can't wait to see how this turns out!


Sent from my potato using Tapatalk

[rguti153]

http://tapatalk.imageshack.com/v2/14/08/29/a96695696e0a0110651089f910924009.jpg orange glow, oh yeah thanks again for the film Gary

[OtterEffect]

http://tapatalk.imageshack.com/v2/14/08/29/a96695696e0a0110651089f910924009.jpg orange glow, oh yeah thanks again for the film Gary

Did you install it under the flap?


Sent from my potato using Tapatalk

[rguti153]

Not yet but would do . Need to order abs plastic. Cut it . And add my aux input also . Tomorrow ill take the center console /cig out . Whatever is call

[OtterEffect]

Sounds epic really looking forward to final results. Let me know where you get the plastic from!


Sent from my potato using Tapatalk

[rguti153]

Will do

[rguti153]

http://tapatalk.imageshack.com/v2/14/08/31/6efcdf961290bc4ad2fe5a8df848de89.jpg

Not finish, but almost

[WOLFN8TR]

Looks good. So how do you access the buttons on the back or are you just leaving it on that screen?

[rguti153]

I was going to have a back template but is sitting in the very edge on all three buttons . So I can still push the screen an have access to them . Ill see how that works . I had enough of it today. I am giving up n finishing next week . Lol

[rguti153]

http://tapatalk.imageshack.com/v2/14/09/01/f9b52f3a68e6dff17332ab34a0125d17.jpg

[rguti153]

http://tapatalk.imageshack.com/v2/14/09/01/9b6fcc0cb1101437c78e5558f5ba150a.jpg

[WOLFN8TR]

Sounds good.

[Oli77]

You bet...:thumbsup

Wolf, I'm getting one now. Do you still have a bit, or a link to Amazon for the red film?

[WOLFN8TR]

Wolf, I'm getting one now. Do you still have a bit, or a link to Amazon for the red film?

Cool! I need to buy another one for my ///M. I do believe I have enough yes. Send me your info and I will send two of them.

[rguti153]

I remove the one I had , n it got damage lol . Now i have the avin 2 with torque so that works great . but I love the ultraguage when I had it.

[WOLFN8TR]

I remove the one I had , n it got damage lol . Now i have the avin 2 with torque so that works great . but I love the ultraguage when I had it.

What happened to it?

[rguti153]

Actually is still intact but got damage. A button got damage can't change the settings . Only on one n that's all . So u have to manage flipping through it lol . but still works .

[WOLFN8TR]

Hmmm. So can you push it with a pen or something?

[rguti153]

Ummm nope stuck. Is pretty much fuck . If u have it on one setting . Like temp, n all the other stuff .is fine but not to switch from screen to screen . Want it pay for shipping ill take some pics I don't know where are the covers for it either.

[WOLFN8TR]

Ya take some pics I be interested.

[rguti153]

Ill take some pics

[Oli77]

Got mine setup with the windshield mount. Can't be sure about the color scheme.1855918560

Absolutely love it. My temp gauge can be lazy sometimes, this is a safe way to always know engine temp.

[WOLFN8TR]

Looks Good! Remember you can set alarms such as High Coolant temp. Why is the UG reading Celsius and the dash is Fahrenheit?

[Washburn]

Is this the newer version ?


Sent from my NOT bent iPhone 6 using Tapatalk

[Oli77]

Looks Good! Remember you can set alarms such as High Coolant temp. Why is the UG reading Celsius and the dash is Fahrenheit?
Yes, I set an alarm. I am so used to doing OBD 19.7 that Celsius is stuck in my mind. For some reason, I use Fahrenheit for cabin temp.

It is not the experimental model it's the 2.

[Oli77]

Can't make up my mind between the blue and the red.

(thanks again Gary for the red film).

[WOLFN8TR]

Can't make up my mind between the blue and the red.

(thanks again Gary for the red film).

Welcome. I guess which ever one you can see easier in the sun.

I got mine installed in the ///M, love it!


18317

[cakM3]

Ok I just scored a bunch a New Red R25 film! For those of you that are interested in the UltraGauge and want it to match the BMW dash lights here it is! I will send you enough film to make 4 for the UG for FREE!

https://farm8.staticflickr.com/7588/16824051086_de873e4765_b.jpg

Don't know how I missed this Gary... well, it looks like I will be setting up both cars soon ;)

[WOLFN8TR]

You didn't get my Page...[emoji2]

[Washburn]

The newer UG version called EM PLUS can also be modded with the red film, yes?


Sent from my NOT bent iPhone 6 using Tapatalk

[cakM3]

You didn't get my Page...[emoji2]

Missed it somehow but I got it now ;) I will be updating both project threads soon.... :thumbsup Thanks again Gary for helping mod both of my cars :)

[WOLFN8TR]

The newer UG version called EM PLUS can also be modded with the red film, yes?

Yes Sir, I just got one for the ///M and the only thing is it's a slightly bigger screen is all. Slightly

18617


Missed it somehow but I got it now ;) I will be updating both project threads soon.... :thumbsup Thanks again Gary for helping mod both of my cars :)

Welcome Brother Man...

[cakM3]

:thumbsup

[Washburn]

Ah! Good !
Thanks - ordered mine today


Sent from my NOT bent iPhone 6 using Tapatalk

[WOLFN8TR]

Cool! I should be a UG Rep and get paid...LoL

[cakM3]

Cool! I should be a UG Rep and get paid...LoL

no arguments there :)

[Jconlin16]

Installed this on Wednesday, loving it so far. @Wolfn8tr Any chance you have any spare red film left over?

[WOLFN8TR]

Installed this on Wednesday, loving it so far. @Wolfn8tr Any chance you have any spare red film left over?

Yes Sir. PM me your info. [emoji106]

[Jconlin16]

PM sent, thank you! [emoji1]

[cakM3]

Gary's the man!!!


:theman

[WOLFN8TR]

[emoji41]

[Jconlin16]

Gary's the man!!!


:theman

Agreed [emoji106]

[OtterEffect]

I have had mine for a couple months now. Just checking back in to give a shout out to the UG's durability. I have mine mounted on the dash just left of the instrument cluster, and needless to say, it gets exposed to a lot of sun. While I remove the gauge if I am going to be away for an extended period of time (multiple days), I have left it baking in the sun for more than reasonable amounts of time. When starting the car after such a torture tests, UG beeps warning me that it is well above it's maximum heat tolerance.... yet it soldiers on. :)

[rguti153]

So who all seen this
http://www.bimmian.com/SAD/46. Looks pretty good would fit in the cig bin

[Washburn]

But does that have DTC functions or the ability to clear them like ultra gauge ?


Sent from my NOT bent iPhone 6 using Tapatalk

[rguti153]

Mmmm good point

[Washburn]

I don't think it does - I read through pretty quick so it's possible I missed something
but all they described were the gauges and didn't see them mention DTC functions
UG is a much better value with customizable gauges, alarms AND the ability to read and clear codes, IMO


Sent from my NOT bent iPhone 6 using Tapatalk

[johnrando]

It also says not for E46. Too bad.

[rguti153]

Wtf.... That thing should be universal mmmm

[WOLFN8TR]

Bump for New Members...

[Washburn]

UG now has an OBD-II BlueTooth adapter and apps (iOS/Android): :)
http://ultra-gauge.com/blue.htm

And the UG EM Plus is now on sale: $70

I am trying to decide which way to go. I think I like my phone to remain dedicated to normal phone stuff, and not having to jump from app to app (task to task) and just have the UG completely separate....

What do you guys think?

[Oli77]

Nope. We already have a display. This would take resources on phone all the time.

Let a phone stay a phone.

[ELCID86]

Got my Ultragauge yesterday and installed it today. I went with the windshield suction cup and arm mount. The arm is actually quite stiff so you can't bend it while the suction cup is attached. Its more like bend, hold up to windshield, figure out the next bend you need, take down, bend some more, etc.

Now I just gotta spend some time with the manual figuring out what all the different gauge options mean and which ones I want.

I had my car into the shop just two weeks ago and they said there was no codes. But when I hook up my ultragauge, its telling me I've got a code P0461. According to this website http://www.cardiffspecialists.co.uk/tabid/82/BMW-OBD-Codes/P0461/Diagnostics/BMW/Default.aspx , this code has something to do with the fuel level sensor. This makes sense as my fuel gauge went wonky about 6 months after I bought the car. I have to rely on the trip meter to know when to put gas in the car.

The other interesting thing is that on the initial hook up the Ultragauge detected one protocol, but every other time its detected the 9141 Protocol. Is this the same one that everybody else is getting?

Ever sort out the p0461?
Popped up on my car along with small vacuum leak codes.


Sent from my iPhone using Tapatalk

[Stewbie]

Ever sort out the p0461?
Popped up on my car along with small vacuum leak codes.


Sent from my iPhone using Tapatalk
That was a long time ago, and the car has mostly been parked for over a year now due to my back problems (manual, so clutching irritates things), so I don't recall what the outcome was.

Sent from my XT1064 using Tapatalk

[ELCID86]

That was a long time ago, and the car has mostly been parked for over a year now due to my back problems (manual, so clutching irritates things), so I don't recall what the outcome was.

Sent from my XT1064 using Tapatalk

Lol. I understand completely!


Sent from my iPhone using Tapatalk

[jhemmer01]

Cool product

[Oli77]

Yes, very awesome on many fronts. Having live pending codes is great. I bought mine because my temp gauge is lazy sometimes. Second by second readings are very valuable.

[WOLFN8TR]

Bought mine a few years ago and still works great. I love the fact you can set audible alarms on any item being monitored. I have a high coolant temp alarm set which is nice when my wife is driving my car. [emoji6]

[WOLFN8TR]

Bump for new members!

[wstr75]

I have the bluetooth Ultra-Gauge and use it with my iPhone. So far, so good. I also have an Intravee and have it feeding system information to the nav screen while driving down the road and listening to tunes on the iPod. The Ultra-Gauge shows the coolant temperature 1 to 2 degrees F higher than what the Intravee is collecting and putting up on the nav screen. Anybody have a guess why there would be a difference since the information feed is coming from the same internal car network (Can-Bus)?

[danewilson77]

I have the bluetooth Ultra-Gauge and use it with my iPhone. So far, so good. I also have an Intravee and have it feeding system information to the nav screen while driving down the road and listening to tunes on the iPod. The Ultra-Gauge shows the coolant temperature 1 to 2 degrees F higher than what the Intravee is collecting and putting up on the nav screen. Anybody have a guess why there would be a difference since the information feed is coming from the same internal car network (Can-Bus)?Bump

Sent from my SM-G955U using Tapatalk

[Bob1035]

Zombie Thread!

You folks still enjoying/using the UGs?

[Oli77]

Still running all the time in my son's car. Very useful. I set an alarm for coolant temp on it.