BMW Scanner 1.4.0 owners, what did YOU code?

[Dave_B]

So I received my present from China a few days ago. I've only had time to reimage a laptop with WinXP (old spare Dell D600 I had laying around and will dedicate for this BMW) and connect it to make sure it see's the car and so on.

I've found these 2 video's which help a little since there isn't really much on how to use the software.

http://s16.photobucket.com/user/KnightofDeeDee/media/NewItems/ScannerPart1.mp4.html

http://s16.photobucket.com/user/KnightofDeeDee/media/NewItems/ScannerPart2.mp4.html

So far I'm thinking I'll be doing the all windows down/up via remote long hold on lock/unlock, I'll also do visual and audible alarm (I do not have the factory alarm) simulation and door lock over xyz km.

So what did you do? Or want to do?

[Tnhl1989]

So regarding PASoft. Here is a nice thread regarding the set up on the coding.
http://forum.e46fanatics.com/showthread.php?t=935613

For more information regarding installation on Windows 7 or 8.
http://forums.bimmerforums.com/forum/showthread.php?1622061-BMW-Scanner-1-4-0-on-Win-7-64-bit&p=23146094#post23146094

I put together a whole zip folder with everything here -
http://tnhlserver.net/BMW%20Scanner%20140%20Tony.zip

I coded the lcm to the car to fix the tamper dot when I purchased the car. Change some light settings and added alarm features since I install the oem alarm. Can't recall anything else.

[alexandre]

I did remote windows down, remote windows up, disabled trunk opening when car is locked, enabled alarm, unlock the 4 doors at once with the keyfob, euro hazards, clutch-less start, and disabled DRL's.

[johnrando]

I don't know what s/w William used but we did triple blink, windows all up, windows all down, individual up/down (vert only I think), vert top up/down with remote. I didn't have to do these other as the were set how I liked, but I would have done clown nose blink on, citylights off, and no chirp but lights blink when locked

[wsmeyer]

I did top up / down from remote (same setting as sunroof)
Both doors unlock with one click
Turned on rear window and all auto up (after modding switches)
Disabled key in ignition warning
Set service interval to minimum

I did some other stuff with NCSExpert but BMW Scanner will do most of the common stuff.

[wsmeyer]

I don't know what s/w William used but we did triple blink

You have to use NCSExpert to set triple blink. Plus an LCM with SW version 4

[Dave_B]

Good point, I wanted to change the service interval to 6k miles.

[wsmeyer]

Good point, I wanted to change the service interval to 6k miles.

I just double checked, valid entries are:

6.000_km
11.000_km
25.000_km

[Washburn]

Congrats on getting into coding, and have fun!
I am Jealous - hopefully I will be able to make it to one of the meets and get some things coded my car as well...
none of you successful coders live near me :(

[alexandre]

I just double checked, valid entries are:

6.000_km
11.000_km
25.000_km

Can't you put anything there ? I set mine to 12,500 km :dunno

[Dave_B]

Congrats on getting into coding, and have fun!
I am Jealous - hopefully I will be able to make it to one of the meets and get some things coded my car as well...
none of you successful coders live near me :(


I'm not terribly far from you in Greenville, SC. Feel free to come down any time.

I hope to take my dedicated laptop and put NCSExpert and Simulated GT1 as well.

[Washburn]

Thanks much for the offer - I wasn't sure where you were located! :) I might take you up on that for real ..

[Tnhl1989]

What is GT1? Any instructions for this part?


Sent from my iPad using Tapatalk HD

[wsmeyer]

Can't you put anything there ? I set mine to 12,500 km :dunno

I have not tested it but I've read in several places that those are the only valid entries. I suppose if it would accept anything you could put 2 in there and see if it goes off in 1.2 miles.

[Dave_B]

What is GT1? Any instructions for this part?


Sent from my iPad using Tapatalk HD

A GT1 is what BMW technicians use at the dealership. I too am not familiar with it, but have access to one if I can get it to communicate properly. My step father used to teach the BMW Step Program at UTI so that's how I have access to it and his knowledge on using it. My brother was also a BMW tech at Braman BMW in SFlorida. I pick his brain on these things all the time.

Some additional reading:

http://bmwgt1.com/

[wsmeyer]

A GT1 is what BMW technicians use at the dealership. I too am not familiar with it, but have access to one if I can get it to communicate properly. My step father used to teach the BMW Step Program at UTI so that's how I have access to it and his knowledge on using it. My brother was also a BMW tech at Braman BMW in SFlorida. I pick his brain on these things all the time.

Some additional reading:

http://bmwgt1.com/

I didn't realize GT1 was DIS. I have that setup and working I just haven't had a reason yet to figure it out.

[Tnhl1989]

I didn't realize GT1 was DIS. I have that setup and working I just haven't had a reason yet to figure it out.

Oh it's called DIS as well. I have it but haven't need to use it yet. Ill be getting around to using it one day.

[sillieidiot]

pretty much did the same thing as everyone else. i had most of my stuff done already. i only added: disabled sunroof from opening when holding down unlock, code my other key to lock when moving. on several other cars, i disabled the stage 2 steering wheel airbag check, disabled checks to use LED bulbs in highs without resistor, disabled selective locking, turn on optical confirmation, windows up with key, etc. i use it when i'm doing work on the side so i think did most of the easy stuff already. i noticed that the window looks different depending on the car. so when people posts screen shots, it's not going to necessary look like that, even if you use the same software version.

btw OP, you're not going to be able to set audible confirmation without an alarm. only visual. you need the siren.

[SoCalZman]

Geez, sooo many options that I didnt know about. I dont think we have any experts in NorCal with this stuff but once I move to SoCal hopefully someone that knows how to do all this stuff can help me out.

[Dave_B]

btw OP, you're not going to be able to set audible confirmation without an alarm. only visual. you need the siren.

That was exactly the idea, doing the $5 siren mod. :)

[sillieidiot]

Geez, sooo many options that I didnt know about. I dont think we have any experts in NorCal with this stuff but once I move to SoCal hopefully someone that knows how to do all this stuff can help me out.

what about kalim? lol i know he knows how to do this. and perform an s54 swap lol

[sillieidiot]

That was exactly the idea, doing the $5 siren mod. :)

oh, yeah you didn't state it. just figured i'd let you know lol

[Dave_B]

Appreciate you mentioning it. I'm sure anyone else reading may not be aware as well.

[Katu]

I am also in NorCal and would love to code a few of these options! I don't supposed any fellow Mafia members will be at bimmerfest this year with the right tools? I would buy you lunch! :D

[Tnhl1989]

Nope but I am planning on doing a group buy for the scanners if anyone is interested. Cost is about $32 dollars for family :)

[Katu]

Interested in group buy!

[Dave_B]

Nope but I am planning on doing a group buy for the scanners if anyone is interested. Cost is about $32 dollars for family :)

I picked mine up for $26.99 shipped from China on Ebay.

Take a look on there.

Edit: Found it for those interested.

http://www.ebay.com/itm/BMW-Scanner-1-4-0-Never-Locking-/230961570090?pt=LH_DefaultDomain_0&hash=item35c661e12a

[danewilson77]

In for review.

[Dave_B]

Review granted:

BZ Dane, BZ ;)

[danewilson77]

Review granted:

BZ Dane, BZ ;)

Ha!

I still don't see your review. What am I missing?

Sent from the HTC DNA, Williamsburg, VA and USA

[Tnhl1989]

I picked mine up for $26.99 shipped from China on Ebay.

Take a look on there.

Edit: Found it for those interested.

http://www.ebay.com/itm/BMW-Scanner-1-4-0-Never-Locking-/230961570090?pt=LH_DefaultDomain_0&hash=item35c661 e12a

Yeah the wait is so long from china!

[Dave_B]

Ha!

I still don't see your review. What am I missing?

Sent from the HTC DNA, Williamsburg, VA and USA


That it's good and worth the $26. IMO, if your going to go to the dealership and spend the $100 an hour to get some things done, you could do this for cheaper (assuming what you want done, this supports) AND you can help friends in the area for a 6 pack to do their cars. :)

And for the wait, it took about a week and a half. And this utility lets me go back and forth. If your of the impatient variety, there is a company in California that has them, in stock for around $55. But me being on the east coast, the wait was still going to be around 6 days.

[danewilson77]

Does this need to be used in conjunction with a stand alone computer or can one use normal everyday laptop? If no, why?

[cakM3]

Does this need to be used in conjunction with a stand alone computer or can one use normal everyday laptop? If no, why?

Dane,

The BMW Scanner 1.4.0 comes with PA Soft software and can be set up on any computer that supports the Windows OS. I currently run my PA Soft/BMW scanner using my MacBook Air (new BIMMac) and am able to read and reset faults/errors, and look at live data....it is a useful tool but I realize as good as PA Soft is, I still need NCSExpert and/or SSS do to other things like code in my VO and stuff...

All of these can be installed on a regular laptop, you don't need a standalone computer so to speak....

[danewilson77]

OK. Great. Thanks Charlie.

So..is this what I need? Legit?

http://www.ebay.com/itm/Brand-New-BMW-Scanner-1-4-0-programmer-X5-X3-Z3-E38-E39-E53-E83-E85-E36-E46-/170821713729#vi-content

[cakM3]

OK. Great. Thanks Charlie.

So..is this what I need? Legit?

http://www.ebay.com/itm/Brand-New-BMW-Scanner-1-4-0-programmer-X5-X3-Z3-E38-E39-E53-E83-E85-E36-E46-/170821713729#vi-content

Dane,

Looks exactly like the one I got from Ebay but I got mine from a different seller.

[danewilson77]

OK. Thanks.

[Tnhl1989]

Don't worry Dane. I'm sure your car will be all set if you need anymore coding. I'll do it for you :)

[danewilson77]

Sounds good. Thanks Tony.

As my car gets older, I think it's important to be able to scan the car for specific faults. Coding will be cool as well.

I went ahead and purchased 1.4.0. Should arrive before I retire.

[Tnhl1989]

I was going to say I can just send you one since I probably won't ever use my scanner anymore. Been messing with NCS and stuff a lot lately. However I have to say if you are running on windows 7/8 or XP I can send you the information and files for that as well.

[danewilson77]

OK.

Tony, I just purchased but the files would be great if everything doesn't come on that cd?

[Tnhl1989]

PM'ed :)

[danewilson77]

Replied. Thanks

[wertyu78]

I enabled my high-beams, low-beams, and fogs to be on simultaneously.

[danewilson77]

I enabled my high-beams, low-beams, and fogs to be on simultaneously.

Tri-fecta!!!!!

I have same.

[Dave_B]

I enabled my high-beams, low-beams, and fogs to be on simultaneously.

Wyatt, can you give details on how you set this up?

[wertyu78]

Wyatt, can you give details on how you set this up?

Yeah NP!

[BavarianZHP]

Using the PA software v1.4.0 and I have no idea what most of the following functions will do. Can someone give me the details on what each means???

http://i218.photobucket.com/albums/cc12/Bike_enthusiast/LCM_zpsb7ad5d23.png (http://s218.photobucket.com/user/Bike_enthusiast/media/LCM_zpsb7ad5d23.png.html)

[BavarianZHP]

I'm specifically wondering about the ones under the "Lighting Options" category. Also, even though my car's a manual, double clicking one of the test categories states it as an automatic somehow (in others it states as manual) so I changed it... I googled around and apparently its a common thing...

[BavarianZHP]

Oh I apparently disabled my safety clutch switch for starting the car by selecting the "Manual" option under the EWS... So that is what it is for.

[MrMaico]

Wyatt, can you give details on how you set this up?


Yeah NP!

I'd like to know also. Assume it wasn't done with BMW Scanner 1.4.0?

I just got NCSExpert etc. installed the other day but haven't had a chance to try anything yet. Need to do some more reading on how to use NCS.

Thanks......Barry

[BavarianZHP]

I think coding for the trifecta light mod requires coding the LCM and can not be done with the BMW Scanner. I hope I'm wrong though!

[MrMaico]

I think coding for the trifecta light mod requires coding the LCM and can not be done with the BMW Scanner. I hope I'm wrong though!

Unfortunately, I'm pretty sure you're right.

[trancenation]

Does anyone know the specific steps towards recoding for Enabling usage of Fog lights while using high beams? I'm using the BMW Scanner V1.4 Btw. I've reached the LCM menu and I am a bit lost. Any help is appreciated!

[sillieidiot]

You can't do it with this either

[Hornung418]

Hey quick q...will NCSExpert do more than PASoft?

I need to set my EWS to manual and the DME needs to be aligned.

Tips.

From a GS3, this was sent.

[Dave_B]

No clue on how, but yes NCS Expert will do more than PASoft for sure.

I look at PA Soft this way, it easily allows a non-tech user to make pre-determined and most popular changes. There's no German to translate or anything like that. Check a box, press Apply and it does the rest for you. GT1/NCSExpert and items like that are much more complicated, but you have access to just about anything out there that can be changed.

[terraphantm]

Hey quick q...will NCSExpert do more than PASoft?

I need to set my EWS to manual and the DME needs to be aligned.

Tips.

From a GS3, this was sent.

Yes and no. One thing PASoft can do that none of the BMW software can is EEPROM editing. But that's a pretty advanced feature that most won't use without precise instructions.

In terms of recoding, NCS is much more powerful. There are hundreds of lines that PASoft doesn't touch. And with NCS Dummy, it's not difficult to figure out what does what anymore. NCS Expert is not however for diagnosis

INPA is for diagnosis, and is more powerful than PASoft in that regard. INPA is what you would use to sync the EWS with the DME

[Hornung418]

Okay can you lay out a guide for syncing the DME and EWS? I have to get the car running by Friday or I will spend the weekend reverting back to stock because my sister now has a job and needs the car I've been driving for the past 4 months.

I mentioned that I found that pressing Shift + F6 will take me to the EWS 3 menu and my options are sync and reset. I tried that and it didn't work.

[ELCID86]

Using the PA software v1.4.0 and I have no idea what most of the following functions will do. Can someone give me the details on what each means???
13479


I'm also wondering about this. First time coder here :-] WHy would the xenon boxes be checked in my car that has halogen headlights? And what happens if I uncheck them?

[slater]

I'm also wondering about this. First time coder here :-] WHy would the xenon boxes be checked in my car that has halogen headlights? And what happens if I uncheck them?

maybe they turn into xenons? :) or they fall out of the car? ;)

peter

[alexandre]

No clue on how, but yes NCS Expert will do more than PASoft for sure.

I look at PA Soft this way, it easily allows a non-tech user to make pre-determined and most popular changes. There's no German to translate or anything like that. Check a box, press Apply and it does the rest for you. GT1/NCSExpert and items like that are much more complicated, but you have access to just about anything out there that can be changed.

PA Soft can do some random advanced stuff like resetting adaptations, modifying software down to hex level, changing VIN and mileage of some modules, etc... Honestly at the prices these tools cost both should be in every E46 owner's toolbox.

[ELCID86]

maybe they turn into xenons? :) or they fall out of the car? ;)

peter

Yikes!

[Tnhl1989]

Jon forgot to code it off from the m3.

[ELCID86]

Jon forgot to code it off from the m3.

Ahh, makes sense. (ANd I like to blame Joop!) So it's the LCM that has remnants from it's former life. I assume it's safe to uncheck them. ??

[ELCID86]

Ahh, makes sense. (ANd I like to blame Joop!) So it's the LCM that has remnants from it's former life. I assume it's safe to uncheck them. ??
I unchecked them and they didn't pop out! GTG.

[T_Boy9]

Wow! pretty baddass stuff here!

[prowlerflyer]

So I've had my BMW scanner 1.4.0 for about a week now and having a good time. I have a few questions though:

- When I go into the DME module, live data is grayed out. Is that correct?

- Can someone explain all the different light options? Euro DRL? How are they different? Side lights as brakes? Yikes!

- as an FYI, when going through the Radio coding (NAV radio), my PTY was set to Euro. So I set it to USA. When you do that though, it will erase your saved radio stations when you write the code.

Thanks

[ELCID86]

Question: will PASoft move past the "car identification " dialogue box without being plugged into the OBD port on the car?

http://uploads.tapatalk-cdn.com/20160810/9c3dd727ec3b8d3caa2a4de23b22c068.jpg

I'm trying to trouble shoot this error and don't feel like sitting in the hot car if I don't need to be hooked up to it...

http://uploads.tapatalk-cdn.com/20160810/423034cb8d3377e830e749be3799df03.jpg

[san]

Question: will PASoft move past the "car identification " dialogue box without being plugged into the OBD port on the car?

http://uploads.tapatalk-cdn.com/20160810/9c3dd727ec3b8d3caa2a4de23b22c068.jpg

I'm trying to trouble shoot this error and don't feel like sitting in the hot car if I don't need to be hooked up to it...

http://uploads.tapatalk-cdn.com/20160810/423034cb8d3377e830e749be3799df03.jpg

Off topic I guess but did you manage to get it working again?


Sent from my iPhone using Tapatalk

[ELCID86]

Off topic I guess but did you manage to get it working again?


Sent from my iPhone using Tapatalk

Nope. That's why I'm asking the question... :-)

[san]

Nope. That's why I'm asking the question... :-)

Aah, I've never used PASoft before so I thought you managed to fix that issue and moved onto something else...


Sent from my iPhone using Tapatalk

[ELCID86]

Aah, I've never used PASoft before so I thought you managed to fix that issue and moved onto something else...


Sent from my iPhone using Tapatalk

I wish. And come on in, the water is fine!

[terraphantm]

Question: will PASoft move past the "car identification " dialogue box without being plugged into the OBD port on the car?

http://uploads.tapatalk-cdn.com/20160810/9c3dd727ec3b8d3caa2a4de23b22c068.jpg

I'm trying to trouble shoot this error and don't feel like sitting in the hot car if I don't need to be hooked up to it...

http://uploads.tapatalk-cdn.com/20160810/423034cb8d3377e830e749be3799df03.jpg

From what I remember, the interface needs to be getting 12v from the OBDII connector to get past that page.

[onaquest]

Am i missing something, how can you do scan if you're not connected?

Do you mean that you want to review the scan results away from the car? I think it dumps to file by default

[ELCID86]

From what I remember, the interface needs to be getting 12v from the OBDII connector to get past that page.

Thanks. And I'm not trying to scan. Just trying to get the dongle working and would prefer not sweating my nads off while doing it!

[ELCID86]

BP hooked me up. Hopefully this will help someone else on Win10.

http://uploads.tapatalk-cdn.com/20160816/8adf0f6d4957a57f356caec118b4d136.jpg

http://uploads.tapatalk-cdn.com/20160816/e12ee32d4a7bb5f6ac9e748778adbd98.jpg

http://uploads.tapatalk-cdn.com/20160816/7aaf7473d3b5597680956453f46aa043.jpg

http://uploads.tapatalk-cdn.com/20160816/a2bfa9e63c06064afc65fd1730578dbd.jpg

http://uploads.tapatalk-cdn.com/20160816/47f77e778f8665fb400c5a6314382bd0.jpg

http://uploads.tapatalk-cdn.com/20160816/dace1b8275eb404b1c9d54a988b7ea78.jpg

http://uploads.tapatalk-cdn.com/20160816/546390ca80a9fe301a5b7a95bda87d1d.jpg

[Tnhl1989]

That's quite weird. Never done that way before.

[az3579]

That's quite weird. Never done that way before.

I can't install the drivers for it any other way that I know of on 64-bit machines that I've used.

[Sockethead]

Windows 10....

[az3579]

Windows 10....

Windows 7 x64 did the same thing.

[Sockethead]

Ok.... Windows.... the operating system that defies logic :scratchinghead

[az3579]

Ok.... Windows.... the operating system that defies logic :scratchinghead
?

Sent from my LG V10 on Tapatalk

[slater]

I can't install the drivers for it any other way that I know of on 64-bit machines that I've used.


Windows 10....


Windows 7 x64 did the same thing.

weird. i have it running on Windows 10 (x64) and didn't use that driver.

[Sockethead]

?



Come on BP, You know how you can have two identical systems and one will take the drivers and the other you gotta do some round about way to get them installed...

[az3579]

Come on BP, You know how you can have two identical systems and one will take the drivers and the other you gotta do some round about way to get them installed...

It's happened on multiple systems and they all behaved the same way... lol
I'm treating it as the standard now. I've wasted so much time trying to install it the way it's supposed to be installed to no success on a variety of laptops. :dunno


I haven't had the time recently to invest in trying to find an alternate driver. I remember searching way back when for a different one but this is the only one I could find for this device, so "it had to do". This methods works, so I never had the need to go out and look for a driver that was possibly released after the time I last looked.

[slater]

It's happened on multiple systems and they all behaved the same way... lol
I'm treating it as the standard now. I've wasted so much time trying to install it the way it's supposed to be installed to no success on a variety of laptops. :dunno


I haven't had the time recently to invest in trying to find an alternate driver. I remember searching way back when for a different one but this is the only one I could find for this device, so "it had to do". This methods works, so I never had the need to go out and look for a driver that was possibly released after the time I last looked.

hey, if it works... it works! :)

[az3579]

Looks like Tony sent me a driver package for it. Quickly peeking in the inf file, it seems it's an older version that what I'm currently using. I'll have to test it on a VM on day when I have time.

[AGM5]

Thus far I have added Auto Close from the remote. I will be adding Brake Force Indicator and Rear Fog Lights if possible with P.A. Soft otherwise it'll have to be NCSExpert.

[ELCID86]

It's a real PITA getting it running without you guys as tech support.

I was able to get my cluster back up to the correct miles with a PASoft/IKE hack.

Thanks again guys.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - anonymous

[terraphantm]

It's happened on multiple systems and they all behaved the same way... lol
I'm treating it as the standard now. I've wasted so much time trying to install it the way it's supposed to be installed to no success on a variety of laptops. :dunno


I haven't had the time recently to invest in trying to find an alternate driver. I remember searching way back when for a different one but this is the only one I could find for this device, so "it had to do". This methods works, so I never had the need to go out and look for a driver that was possibly released after the time I last looked.

I've always just used the FTDI x64 drivers from their website

[Dual]

There is a lot to read about coding options in this thread and several others: sorting out information from guesses can be a bit tricky.

I'm trying to set my system so that the car 'chirps' when locked and unlocked from a key remote. I don't have the siren installed.
Is this possible? If so, how?
Oh, and what is the "five dollar siren option" I read about in my travels?

[Dual]

...I will be adding Brake Force Indicator and Rear Fog Lights if possible with P.A. Soft otherwise it'll have to be NCSExpert.Isn't the brake force indication ("Adaptive Brake Lights") standard on these cars? I'm looking at my 2006 ci sales brochure where they describe it as such.

[AGM5]

Isn't the brake force indication ("Adaptive Brake Lights") standard on these cars? I'm looking at my 2006 ci sales brochure where they describe it as such.
Brake Force Indicator is but Brake Force Indicator with strobe is not, at least not in the US.

Sent from my XT1254 using Tapatalk

[Dual]

OMG, so they strobe, eh? Well I never...

[Sockethead]

There is a lot to read about coding options in this thread and several others: sorting out information from guesses can be a bit tricky.

I'm trying to set my system so that the car 'chirps' when locked and unlocked from a key remote. I don't have the siren installed.
Is this possible? If so, how?
Oh, and what is the "five dollar siren option" I read about in my travels?

If you don't have the siren, it won't chirp. It uses the siren for that. The $5 siren is just cheap "speaker" for the chirp...

[Dual]

Thanks for this!

[BMWCurves]

There is a lot to read about coding options in this thread and several others: sorting out information from guesses can be a bit tricky.

I'm trying to set my system so that the car 'chirps' when locked and unlocked from a key remote. I don't have the siren installed.
Is this possible? If so, how?
Oh, and what is the "five dollar siren option" I read about in my travels?

It's simply a piezo buzzer (<$5 from Radio Shack) that is wired into the prewiring for the alarm system. I had it on my old 330Ci. Worked perfectly fine.

An example guide is here:
http://www.diymybmw.com/e46/5-alternative-for-lock-beep/

[Dual]

Thanks!

[Overboost]

I used my BMW Scanner 1.4.0 to code my VIN and mileage to my 2006 LCM upgrade to correct the tamper dot. Then retrofitted the auto lights and wipers and simply checked the box in the LKE (GM5) for the rain sensor. Everything worked perfect with no coding needed in NCS Expert. Also reset the temperature gauge buffer zone in the cluster eeprom to be a little more accurate to current engine temperatures. I use NCS Expert and INPA as well but I always reach for this software first. The user interface is so easy to use, I love this tool. At $25.00, this tool should be in every BMW enthusiasts toolbox.


https://www.youtube.com/watch?v=hvjZRp0DUD8

[BMWCurves]

Nicely done!

[nextelbuddy]

It's a real PITA getting it running without you guys as tech support.

I was able to get my cluster back up to the correct miles with a PASoft/IKE hack.

Thanks again guys.


---
"ZHP is a garbage option anyway- just some cosmetic upgrades with a different cam and diff to claw back some of the performance lost fitting those hideous and heavy wheels. Any 330 with a 3.46 diff will smoke a ZHP every time. The whole Mafia thing reeks of childish behavior." - anonymous


can you explain this more in depth? what is this Hack you speak of.

I have an M3 cluster with 136k miles and my car has 167k miles. I want the cluster to adopt the higher mileage and i HOPED it would. i always thought that the tamper dot only made sense for someone trying to ROLL BACK but not go forward lol.

for now I had to use PASoft to change the info in the M3 cluster to say 330i and then change the LCM to have the LOWER mileage so that the tamper dot would go away but I would love to get the m3 cluster to have the higher mileage. :/