OEM BMW 330 ZHP Alcantara Steering Wheel Still Available

[3ZHP]

My Alcantara Steering Wheel is starting to show signs of wear at 90K, so I thought I've do a little research. When I was a the Dealer today picking up something for my other Bimmer, I ask the parts guy if the Alcantara Wheel was still available. It was a slow a Saturday, so he looked it up, and yes it is still available. Only problem is, it comes with a VERY, VERY BIG PRICE TAG. $1263.00! Ouchy wow wa

You know it's expensive when your 10% car club discount is $126.30.


http://i591.photobucket.com/albums/ss351/3zhpguy/ZHP/New_Alcantara_Wheel_Page_1.jpg
http://i591.photobucket.com/albums/ss351/3zhpguy/ZHP/New_Alcantara_Wheel_Page_2.jpg

[danewilson77]

Just get the alcantara oem replaced and with the ///M3 tri-stiching for $250.00

To replace the wheel for the covering is ludicrous imho.

[mimalmo]

^^^I agree. The tri-stitched M3 wheel is damn sexy.

[ZSP-Mafia]

Just get the alcantara oem replaced and with the ///M3 tri-stiching for $250.00

To replace the wheel for the covering is ludicrous imho.

Where did you find it for $250? I paid $370 for mine at Tischer.

[danewilson77]

Someone here I believe said $250....

Shoot...I got the $60 euro perf leather wheelskin.

I'd rather have aftermarket intake than that.

[gr330zhp]

Oh yeah that's the exact price. BMW changed my entire wheel at 32k miles :) But I didnt pay, they did, it was still CPO. I have connections and used the term "pre-mature wear" ;)

[danewilson77]

I will look around for the $250 link later...

Sent from my Droid using Tapatalk

[MrMaico]

The cheapest I've seen it is $345. One option is to get this wheel....

http://www.trademotion.com/partlocator/index.cfm?action=MorePartInfo&PartID=535713&siteid=214672&catalogid=4462

....and install your buttons on it. Or there are places to get them re-wrapped. Here is one place....

http://www.dallassteeringwheel.com/sw1.htm

I think they charge around $350 though.

Or there is a guy that is doing them for $150 and $15 for shipping. Here is some of his work....

http://www.m3forum.net/m3forum/showthread.php?t=344943
http://www.m3forum.net/m3forum/showthread.php?t=348023
http://www.m3forum.net/m3forum/showthread.php?t=348298

I'm seriously considering having him do mine with Alcantara and the tri-stitch. Either that or get an M3 wheel with the tri-stitch but to me that's part of what is special about a ZHP....the Alcantara wheel. His contact info on E46fanatics is coby1 or m123 on m3forums.net.

Barry

[rikdee]

I'm seriously considering having him do mine with Alcantara and the tri-stitch. Either that or get an M3 wheel with the tri-stitch but to me that's part of what is special about a ZHP....the Alcantara wheel. Barry

I agree, our Alcantara steering wheel is a mark of distinction; just one of the many cool things about our cars. And, it's not as though the material is an 'industry-concluded' bad idea - current Lamborginis have Alcantara steering wheels.

[thesixsins]

http://e39.5post.com/forums/showthread.php?t=314125
There is this wheel.

[danewilson77]

The cheapest I've seen it is $345. One option is to get this wheel....

http://www.trademotion.com/partlocator/index.cfm?action=MorePartInfo&PartID=535713&siteid=214672&catalogid=4462

....and install your buttons on it. Or there are places to get them re-wrapped. Here is one place....

http://www.dallassteeringwheel.com/sw1.htm

I think they charge around $350 though.

Or there is a guy that is doing them for $150 and $15 for shipping. Here is some of his work....

http://www.m3forum.net/m3forum/showthread.php?t=344943
http://www.m3forum.net/m3forum/showthread.php?t=348023
http://www.m3forum.net/m3forum/showthread.php?t=348298

I'm seriously considering having him do mine with Alcantara and the tri-stitch. Either that or get an M3 wheel with the tri-stitch but to me that's part of what is special about a ZHP....the Alcantara wheel. His contact info on E46fanatics is coby1 or m123 on m3forums.net.

Barry

Here is a lil bit of his conversation with one of the members...kinda seems like he may not be doing this anymore.
-------------------------------------------------------------------------------------------------------------
Re: Smg Black Alcantara Tri-stitch steering wheel with red Time? Stripe

--------------------------------------------------------------------------------

Quote:
Originally Posted by talontid
Hey I pmd you a while back about doing this with a yellow stripe @ 12 o' clock but
Never heard from ya. I need a 6spd wheel, m-tri stitch with a yellow stripe. Pm me and lemme know. Thanks !!

i pm'ed you back saying i didnt want to do it lol / sorry but i dont think i would want to do another one it just takes way too much xtra time to do and if i dont line up stripe good enough i waste fabric(which happend on this effort the fabric stretches and then when i work to make the thumb grip areas smooth it stretches more so its hard to gauge the stripe )so that said its a slim chance that i will make one /and if i did it would have to be for more than what i useually chg.
Mike
-----------------------------------------------------------------------------------------------------------------------

[nk_zhp]

I was able to sell off my stock alcantara one for ~120 bucks and got the M3 one (black stitching in my case) as a present from my wife. Glad I did it early on while the alcantara could fetch a reasonable amount of dollars.

[MrMaico]

I agree, our Alcantara steering wheel is a mark of distinction; just one of the many cool things about our cars. And, it's not as though the material is an 'industry-concluded' bad idea - current Lamborginis have Alcantara steering wheels.

Yup, and who knows, maybe they have improved the durability of Alcantara in the 6 or 7 years since ours were produced. No doubt the M3 wheel looks sweet too but I've seen pics of older ones and they seem to get smooth/shiny after time and don't look nearly as nice as new. I have no idea how long that takes to happen though.


Here is a lil bit of his conversation with one of the members...kinda seems like he may not be doing this anymore.
-------------------------------------------------------------------------------------------------------------
Re: Smg Black Alcantara Tri-stitch steering wheel with red Time? Stripe

--------------------------------------------------------------------------------

Quote:
Originally Posted by talontid
Hey I pmd you a while back about doing this with a yellow stripe @ 12 o' clock but
Never heard from ya. I need a 6spd wheel, m-tri stitch with a yellow stripe. Pm me and lemme know. Thanks !!

i pm'ed you back saying i didnt want to do it lol / sorry but i dont think i would want to do another one it just takes way too much xtra time to do and if i dont line up stripe good enough i waste fabric(which happend on this effort the fabric stretches and then when i work to make the thumb grip areas smooth it stretches more so its hard to gauge the stripe )so that said its a slim chance that i will make one /and if i did it would have to be for more than what i useually chg.
Mike
-----------------------------------------------------------------------------------------------------------------------

Pretty sure he was just saying he didn't want to do one with a stripe at the top Dane. I just received a PM from him last night about a question I had.



I was able to sell off my stock alcantara one for ~120 bucks and got the M3 one (black stitching in my case) as a present from my wife. Glad I did it early on while the alcantara could fetch a reasonable amount of dollars.

Damn! That sounds like a heck of a deal. I would have gladly taken it off your hands just to have a good core on hand for a re-wrap, or maybe used it as-is.

Barry

[rikdee]

From my POV, it's primarily about maintenance. A regular, gentle cleaning with a moistened microfilter towel seems to keep a good one fresh. Attempting to bring them back from the dead is a separate issue - IOW, an ongoing lack of care. Driving gloves are also a plus.

[danewilson77]

ok Maico.....understand.

[MasterC17]

I had this guy: http://steeringwheels.carbonmade.com/ do mine. It cost me $250 with the Tri-Stitch and Leather Band. He also paid for return shipping. He did a pretty good job and it's holding up well so far - I'm happy.

http://i277.photobucket.com/albums/kk52/MasterC17/christmas10.jpg

[danewilson77]

I had this guy: http://steeringwheels.carbonmade.com/ do mine. It cost me $250 with the Tri-Stitch and Leather Band. He also paid for return shipping. He did a pretty good job and it's holding up well so far - I'm happy.

http://i277.photobucket.com/albums/kk52/MasterC17/christmas10.jpg

Yup....that's who I was thinking of....

Sent from my Droid using Tapatalk

[SC4ME]

I had this guy: http://steeringwheels.carbonmade.com/ do mine. It cost me $250 with the Tri-Stitch and Leather Band. He also paid for return shipping. He did a pretty good job and it's holding up well so far - I'm happy.

http://i277.photobucket.com/albums/kk52/MasterC17/christmas10.jpg

That is a sweet looking wheel. I want one!

[nk_zhp]

When a guy puts red tape at the top of the steering wheel ... you know it's trouble :)

[Mtnman]

Yeah, the tri stitching on that wheel is hot.

[MrMaico]

Yeah, the tri stitching on that wheel is hot.

I agree! Even though I probably could have gotten another year out of mine I sent it in today to the guy I mentioned above for a re-wrap with Alcantara and tri-stitch. I see he has a website now. He also raised his prices a bit but still not a bad price. Can't wait to get it back on now.

http://www.cobywheel.com/

Barry

http://mrmaico.smugmug.com/Cars/BMW-333Ci/bmw-interior-1a/1180658504_kh3jG-XL.jpg

[Mtnman]

wow. I want a arm rest cover from them. That would be cool to take that from worn out leather to alcantra with stitching! For 45 bucks too....not bad

[danewilson77]

I am buying an armrest cover.

[Mtnman]

Marcus, sponsers? Cause I want one too.... we all could shop here!

Sent from my DROID2 GLOBAL using Tapatalk

[Marcus-SanDiego]

I don't know the owner. Seems like a small company. Doubt they'd want to be affiliated.

[Mtnman]

Dane. Let me know what he says if u ask him about tri color stitching on the armrest. I want that.

Sent from my DROID2 GLOBAL using Tapatalk

[Marcus-SanDiego]

Marcus, sponsors? Cause I want one too.... we all could shop here!

Sent from my DROID2 GLOBAL using Tapatalk

Happy to announce that the owner and I struck a deal today. Look for a Coby Wheel forum shortly.

[mimalmo]

I soooooo want that tri-stitch Alcantara wheel.

[Marcus-SanDiego]

You can buy it from Coby Wheel, which is now an affiliate advertiser on our site. Woot woot. See announcement here (http://www.zhpmafia.com/forums/showthread.php?1155-New-Affiliate-Sponsor-Coby-Wheel).

[Mtnman]

Dane, did you order the alcantra arm rest yet? Do they do tri stitched?

[danewilson77]

Dane, did you order the alcantra arm rest yet? Do they do tri stitched?

I have not.......waiting on taxes to put in a hefty order or two.

[Gramps05ZHP]

http://www.skyroadster.com/forums/f56/jpms-alcantara-sale-feel-sexiness-27880/

This guy looks like he might be helpful...but still over $300

[danewilson77]

^Great resource.....

[MrMaico]

I got my wheel back from Coby Wheel (http://www.zhpmafia.com/forums/forumdisplay.php?52-Coby-Wheel) (one of our advertisers) yesterday. $176 and it looks perfect.

http://mrmaico.smugmug.com/Cars/BMW-ZHP-misc/IMG0740/1191342403_x75mJ-XL.jpg

http://mrmaico.smugmug.com/Cars/BMW-ZHP-misc/IMG0736/1191342239_CmZXx-XL.jpg

[kayger12]

Looks great. Can't wait to see the shift knob as well.

[MrMaico]

Looks great. Can't wait to see the shift knob as well.

Thanks Keith. Me too, should be here Mon.......errrrr Tues. I'd guess since I have Mon. off so does the USPS. Damn.

[MrMaico]

http://www.skyroadster.com/forums/f56/jpms-alcantara-sale-feel-sexiness-27880/

This guy looks like he might be helpful...but still over $300

Actually it looks more like $555 for a tri-stitched OEM 9002 Grey. Yes, grey.....I thought, like I'm sure most people do that our Alcantara is black but it's actually 9002 Grey. Keep that in mind if you're having a wheel wrapped. Luckily Mike checked with me before doing mine to make sure what I wanted.

http://www.jpmcoachworks.com/catalog/product_info.php?cPath=24_31&products_id=150

[pyreguy]

Good to know! Always called it black.


Sent from my iPhone 5 using Tapatalk

[SC4ME]

I thought it was black as well. Nice to know.