yod88
02-07-2013, 04:45 AM
Hey guys,
A couple weeks ago I went to turn on the heat in the zhp (had been sitting in the garage overnight...was about 9 degrees outside), and as soon as i turned on the blower the pixels in the climate control display did this:
http://img.photobucket.com/albums/v320/yod88/photo_zps35bfb66d.jpg
It has since become a little worse, more pixels are clustered to the left of the first digit, and it doesnt matter if the temp is in the 60s, 70s, 80s, 90s...display shows up the same way
Im assuming this is a cold weather related issue, do you guys know of a fix, or a way to replace the display, or will i have to source a whole new unit to get the display to look as it should again?
Thanks,
Navid
A couple weeks ago I went to turn on the heat in the zhp (had been sitting in the garage overnight...was about 9 degrees outside), and as soon as i turned on the blower the pixels in the climate control display did this:
http://img.photobucket.com/albums/v320/yod88/photo_zps35bfb66d.jpg
It has since become a little worse, more pixels are clustered to the left of the first digit, and it doesnt matter if the temp is in the 60s, 70s, 80s, 90s...display shows up the same way
Im assuming this is a cold weather related issue, do you guys know of a fix, or a way to replace the display, or will i have to source a whole new unit to get the display to look as it should again?
Thanks,
Navid