PDA

View Full Version : Service/Tool Rental



Tnhl1989
02-04-2013, 04:51 PM
Hi guys,

So I was thinking that we could possibly start a thread regarding tool rental. I just realized that my differential bearing is gone and am not sure if I would want to spend more than $100 dollars to fix a problem once and never use the tool again. In terms of helping out the community and all the DIYers that we have here I believe that this thread would be quite useful. Does anyone have a Rear Differential Puller?

To start the list I would be able to offer the following services/tools

1. Tnhl1989 - MA - NCS/PA Soft/INPA (BMW Scanner 1.4.0. ; K+DCAN)
2. Johnrando - CA - NAV update S/W ; Code Reader
3. Dane - VA - Mafia Roller, SRS AIRBAG RESET TOOL, FRONT WHEEL BEARINGS, VANOS RATTLE, PAINT CORRECTION
4. Billschusteruv - PA - Brakes (Motive Powerbleeder & Craftsman Vacuum Blender Set) ; OBDII Code Reader (Actron Autoscanner) ; E30 02 Sensor Wrench
5. Bimmerwill - RTAB Puller
6. Rmckinley81 - MIS RTAB tool. $25 rent. $95 deposit.
7. Niart - M3 Valve Adjustment Tools for rent
8. Imola.ZHP - MIS RTAB tool
9. Forum fender roller - Advise that it is currently floating around and I believe Johnrando has it currently.
10. Clemsone46 - Vanoes Service Tool Set, Crank Pulley Removal Tool - 30 day rental will be $50 + $300 (refundable core charge) + $15 shipping.

johnrando
02-04-2013, 04:54 PM
Great idea. We already have a mafia roller, SES tool, and I think something else (in the custody of the Underboss, Dane). Maybe we could put all the loaner/group tools in the same thread. I've got NAV update s/w on a CD I'm certainly willing to loan. I've also loaned out my code reader.

danewilson77
02-04-2013, 08:23 PM
I think this thread exists already.

Sent from Williamsburg, VA USA.

Tnhl1989
02-04-2013, 10:06 PM
The thread did exist. Seemed a bit out dated now. So what shall we do?

http://www.zhpmafia.com/forums/showthread.php?2108-ZHP-Mafia-Family-Tool-Pool-Tools-for-loaning

BimmerWill
02-05-2013, 03:50 AM
I also have a rtab puller that dad out together for me with a new bolt it would be perfect for those with air tools wanting to replace those items.

Sent from my DROID BIONIC using Tapatalk 2

danewilson77
02-05-2013, 03:59 AM
The thread did exist. Seemed a bit out dated now. So what shall we do?

http://www.zhpmafia.com/forums/showthread.php?2108-ZHP-Mafia-Family-Tool-Pool-Tools-for-loaning

Merge

Sent from Williamsburg, VA USA.

Tnhl1989
02-05-2013, 10:56 AM
Alright well I moved everything to this one then.

Tnhl1989
02-18-2013, 12:35 AM
Does anyone have a rear differential tool?

echo46
02-18-2013, 07:32 AM
This is a great thread. When I get something I will certainly add it.

Rmckinley81
04-09-2013, 05:03 AM
I've got a brand new MIS RTAB tool. I plan on using it on Sunday but after that, I'll either rent it or sell it. $25 gets it and then just ship it back on your dime. $95 deposit refunded on return. If you'd rather purchase, $80.

danewilson77
04-09-2013, 05:21 AM
How much was the tool?

Sent from the HTC DNA, Williamsburg, VA and USA

Rmckinley81
04-09-2013, 06:14 AM
I paid around $95 with shipping.

danewilson77
04-09-2013, 06:29 AM
ok.

LivesNearCostco
04-09-2013, 07:25 AM
What does the rear differential tool do? I have seen a tool for sale to remove and replace the 3 rear diff bushings. Or do you need to disconnect the CV joint or remove the output flanges? (Saw a video showing tool for popping off output flanges was a big screwdriver.) I think the RTAB tool might work on the big bushing at the rear of the differential but would be too big for the two smaller bushings in front of the diff.


Does anyone have a rear differential tool?

Tnhl1989
04-09-2013, 07:34 AM
I am actually not really sure. On my car #9 is shot. However while I am still down there I might as well change out the other bushings as well. Usually you have to drop the whole rear subframe to get to it. At least that's what I been told.

http://realoem.com/bmw/diagrams/w/r/181.png

LivesNearCostco
04-09-2013, 12:29 PM
Yes, big rear diff bushing (#9) is famous for failing on the E46. Front ones (2x part #7) don't seem to fail as often. You do not need to remove the subframe to replace them, though you do have to remove it to replace the subframe bushings (parts 2, 4, maybe 17/19). I believe you must remove the diff. If you're only replacing #9, maybe you can drain the diff, remove cover, replace bushing, then reseal cover and refill diff. Search for DIYs to see if you can replace #9 without removing diff or diff cover.

The diff tool is for pulling the old bushing out then pushing a new one in.

Rmckinley81
04-22-2013, 12:13 PM
I'm finished with the tool now if anyone wants it (MIS RTAB). I imagine this is a frustrating job without it! I'll rent or sell and I can post pics if you want them.

BimmerWill
04-22-2013, 01:55 PM
I am actually not really sure. On my car #9 is shot. However while I am still down there I might as well change out the other bushings as well. Usually you have to drop the whole rear subframe to get to it. At least that's what I been told.

http://realoem.com/bmw/diagrams/w/r/181.png

Im going to be doing a replacement of #9 in the near future. Let us know how it goes and any tips or pointers you may have! Be interested to know if you can replace it without removing diff/diff cover.

Sent from my DROID BIONIC using Tapatalk 2

nike001
04-22-2013, 04:01 PM
Niart (john) has the M3 valve adjustment tools for rent for those here with E46 M3's...

Imola.ZHP
04-26-2013, 08:02 PM
I didn't know this thread existed (my fault for not searching) or I would have just rented the tool I bought from one of y'all.

I have a new MIS RTAB tool that I used for one job, would ship from Memphis, TN, or pick up if you happen to be local, paypal a deposit, return deposit less an agreed amount for "rental" when the tool comes back...

Thanks!

SC4ME
12-20-2013, 04:41 PM
I didn't know this thread existed (my fault for not searching) or I would have just rented the tool I bought from one of y'all.

I have a new MIS RTAB tool that I used for one job, would ship from Memphis, TN, or pick up if you happen to be local, paypal a deposit, return deposit less an agreed amount for "rental" when the tool comes back...

Thanks!



I successfully rented, used, and returned Marcus' (Imola.ZHP) MIS RTAB tool.
First, I waited until last minute to decided to rent from someone. Marcus was first to respond and had it in the mail immediately. It arrived on schedule, I used it and returned it (Flat rate shipping box <$6 ). Marcus immediately returned the deposit. No worries there.

As for how the tool worked, well I am glad I had it. Would have been a real PITA without.

One hint - after watching several DIY videos, I saw the tool being used from either side. However, if you examine the rear trailing arm bracket where the bushing in press fit into, you will notice one side is very squared off while the other side is rounded on the OD (outside diameter) and beveled on the ID (inside diameter). It works best if the tool's support base (the U-shaped piece) is located on the squared off side - this greatly reduces the chances of it slipping off the RTA when tourqe is applied. Also, always insert new busing from the beveled side (it really helps get the bushing in straight and without damage)

If your are replacing RTABs, do yourself a favor and get the tool. yeah, $25 is a bit for tool rental, but afterwards you will know it was worth it.

QC_ZHP
01-15-2014, 09:53 AM
Is the MIS tool available?

Hornung418
04-09-2014, 03:05 PM
Bump!

Has anyone got an RTAB puller? Preferably the MIS tool.

Sent from my GS3.

Imola.ZHP
04-11-2014, 09:54 PM
I have one! PM me if you are still needing to rent one.


--Marcus

JupiterBMW
04-12-2014, 12:41 AM
Dane, others... I had the fender rolling tool last, but I didn't have time to ship it out before I left for the ship, so I left it with Devlin. He currently has the roller as he was planning to do his fenders too.

Hope this doesn't inconvenience anyone, but if you need it, talk to him! :)

danewilson77
04-12-2014, 05:57 PM
Dane, others... I had the fender rolling tool last, but I didn't have time to ship it out before I left for the ship, so I left it with Devlin. He currently has the roller as he was planning to do his fenders too.

Hope this doesn't inconvenience anyone, but if you need it, talk to him! :)

Sounds good.

Samsung Galaxy S5...

QC_ZHP
04-12-2014, 06:07 PM
10 Scale, how hard is DIY fender rolling w/ the tool? Don't wanna mess up the paint or anything.

JupiterBMW
04-12-2014, 06:09 PM
10 Scale, how hard is DIY fender rolling w/ the tool? Don't wanna mess up the paint or anything.

Not too bad. I had Rando coach me along and help me. Its easiest with two people...

wsmeyer
04-12-2014, 06:16 PM
10 Scale, how hard is DIY fender rolling w/ the tool? Don't wanna mess up the paint or anything.

Fender rolling is easy but I would get a flashlight up there and see what you're hitting first. It's usually the fender bolt first, then depending on a bunch of things; camber, ride height, spacers... you could wither be hitting the fender lip that can be rolled, or the inside of the fender which rolling won't help.

QC_ZHP
04-12-2014, 06:27 PM
Judging by the markings, I'm definitely catching the edge of the lip. I plan on taking down the bolt some at the same time. If I can save the $100 and do the rolling myself, I'd be happy but I don't want to get in over my head

Imola.ZHP
04-12-2014, 09:04 PM
^ I read many threads and watched many youtube videos before doing mine. Education is key to any task IMO. The most helpful thread talked about removing the seam-sealer before rolling. I wish I had the links to share, sorry I don't, but if you roll the fenders without removing the seam sealer you will be forever encasing it between the two pieces of metal and you may not get all of the roll or clearance you wanted/needed. Once removed, even though I don't live in the north, I taped off and coated the scratched up back side of the area with some under-coating. This might sound counter-intuitive, but trust me, that seam sealer is THICK right there, and a coat or two of under-coating is much thinner. After that, I thought the actual fender rolling was easy yet mundane compared to removal of the seam sealer. Seam sealer removal was more instant gratification where as heating up the metal (without blistering the paint) and using the rolling tool took forever and was so boring.

I did mine probably 18-24 months ago and when I plan to do my spring cleaning/waxing I hope when I remove the rear wheels everything looks the same as it did when I completed the job. *crossing fingers* It looked fine last year, but this past winter was brutal, even in Memphis.

Imola.ZHP
04-26-2014, 02:26 PM
Bump!

Has anyone got an RTAB puller? Preferably the MIS tool.

Sent from my GS3.

Hey Justin! Your PM box is full buddy, sorry to post this here, but I guess its nothing that private really...

The RTAB Tool arrived at my house today before I left for work, looks like it made the trip there and back safely. I am returning your FULL deposit right now. Hope the install went well and thanks again! If you have a few spare minutes, would you mind posting about your rental experience? Be 100% honest, I can take constructive criticism if you have any to give. Feel free to copy/paste instead of re-writing 3 times. If you are too busy or just end up posting in one, thats ok too, I understand.

http://www.zhpmafia.com/forums/showthread.php?9016-Service-Tool-Rental

http://www.zhpmafia.com/forums/showthread.php?11090-FRent-MIS-RTAB-Tool

http://forum.e46fanatics.com/showthread.php?t=984280

Have a great weekend!

Hornung418
04-26-2014, 02:28 PM
Just got the e-mail saying it was full. Cleared a few of them out of there.

Will definitely give you a solid review, Marcus. The install went much smoother than I anticipated!!

Sent from my GS3.

Tnhl1989
04-26-2014, 03:23 PM
Marcus I would need it sometime soon too. Along with a differential bushings tool, subframe bushing tool and fcab tool lol.

Imola.ZHP
04-26-2014, 04:15 PM
Just got the e-mail saying it was full. Cleared a few of them out of there.

Will definitely give you a solid review, Marcus. The install went much smoother than I anticipated!!

Sent from my GS3.

Glad to hear it went well! I kept looking for a post about it, but my schedule is nuts so I possibly overlooked it. I felt the same when I did the job myself. When I got done I was like "thats was it?" haha.


Marcus I would need it sometime soon too. Along with a differential bushings tool, subframe bushing tool and fcab tool lol.

I'm not sure if this tool could be used for other bushings or not, I guess it might be possible. Give me as much heads up as you can when you need to rent it. A local BMW guy off of a FB group needs it next, hopefully he will just have it for a week or so.

Hornung418
04-26-2014, 04:45 PM
Glad to hear it went well! I kept looking for a post about it, but my schedule is nuts so I possibly overlooked it. I felt the same when I did the job myself. When I got done I was like "thats was it?" haha.

Yeah I posted a pic and a quick blurb about it in my "Adventure Thread" see sig.

Sent from my GS3.

Tnhl1989
05-06-2014, 07:13 PM
Copied from Clemsone46

VANOS Service Tool Set, Crank Pulley Removal Tool

http://www.zhpmafia.com/forums/showthread.php?12939-RENTAL-VANOS-Service-Tool-Set-Crank-Pulley-Removal-Tool

TristanHunter
06-12-2014, 10:02 AM
Does anybody have the differential bushing and subframe bushing tools for rent or for sale?

WOLFN8TR
07-03-2014, 10:12 AM
Sub'd...

WOLFN8TR
08-20-2014, 07:59 PM
How much does it usually cost to ship the Fender Rolling Tool?

CarbonZHP
08-25-2014, 04:16 PM
In for someone with a RTAB tool. Hopefully local and you ca just hook me up.

danewilson77
08-25-2014, 05:58 PM
We have a thread for RTAB tool I believe.

The friendliest forum on the planet!

Imola.ZHP
08-26-2014, 06:03 AM
In for someone with a RTAB tool. Hopefully local and you ca just hook me up.

Not local, but reasonable, flat-rate shipping is about $6 each way. Its already been to California once this year, ha.

http://www.zhpmafia.com/forums/showthread.php?11090-FRent-MIS-RTAB-Tool

marcus.pugh@gmail.com

TWong1200
11-06-2014, 03:19 PM
I'm in need of an RTAB tool. Anyone have one they could loan me? I'm in SoCal!

Thanks!

Tnhl1989
01-10-2015, 10:20 PM
Bump. Does anyone have a subframe bushing tool or rtab tools that I could use? Thanks

danewilson77
01-11-2015, 08:32 AM
Bump. Does anyone have a subframe bushing tool or rtab tools that I could use? Thanks
I think we have one in the family here for rent.

"No flamesuit required"

Imola.ZHP
01-12-2015, 07:47 AM
Bump. Does anyone have a subframe bushing tool or rtab tools that I could use? Thanks

I have a RTAB tool I rent out pretty cheap, shoot me a PM if you can't find one local.

Vas
11-23-2015, 07:20 PM
Does anybody have the front wheel bearing install tool from bmw? I don't want to smack them on.

Part number
83300491905

TWong1200
12-24-2015, 12:06 PM
Does anybody have the front wheel bearing install tool from bmw? I don't want to smack them on.

Part number
83300491905

+1 I'm also looking to borrow one. Otherwise, I'm willing to split the cost with you, Vas. Then we can have one in the family to loan out.

Sent from my Nexus 6P using Tapatalk

Vas
12-24-2015, 12:26 PM
+1 I'm also looking to borrow one. Otherwise, I'm willing to split the cost with you, Vas. Then we can have one in the family to loan out.

Sent from my Nexus 6P using Tapatalk
I had no luck in finding one to rent. Was about to purchase it from Fairfax bmw since that was the cheapest place I found for it.

I'm willing to split the cost. Think they were right around $100.

TWong1200
12-24-2015, 12:29 PM
I had no luck in finding one to rent. Was about to purchase it from Fairfax bmw since that was the cheapest place I found for it.

I'm willing to split the cost. Think they were right around $100.
Let's do it. PM me your PayPal. I'm not ready to use the tool yet but will be in the future.

Sent from my Nexus 6P using Tapatalk

Vas
12-24-2015, 12:40 PM
Let's do it. PM me your PayPal. I'm not ready to use the tool yet but will be in the future.

Sent from my Nexus 6P using Tapatalk
Pm sent

Vas
02-03-2019, 04:52 PM
Does anybody have the tool for rent for the outer upper or lower ball joint/bushing removal on the trailing arm?



Sent from my Pixel 2 XL using Tapatalk

3ZHP
02-03-2019, 05:58 PM
Does anybody have the tool for rent for the outer upper or lower ball joint/bushing removal on the trailing arm?



Sent from my Pixel 2 XL using Tapatalk

I have the one for the rear trailing arm bushing!

https://uploads.tapatalk-cdn.com/20190204/aebf509717959aa531fc6bccf5e2996d.jpg


Sent from my iPhone using Tapatalk

Vas
02-03-2019, 06:12 PM
I have the one for the rear trailing arm bushing!

https://uploads.tapatalk-cdn.com/20190204/aebf509717959aa531fc6bccf5e2996d.jpg


Sent from my iPhone using TapatalkThanks guy but this isn't the right one.



Sent from my Pixel 2 XL using Tapatalk

3ZHP
02-03-2019, 06:56 PM
Thanks guy but this isn't the right one.



Sent from my Pixel 2 XL using Tapatalk

Wasn’t sure! Thought the ball joint was part of the rear trailing arm. You’re not looking for a pickle fork, are you?


Sent from my iPhone using Tapatalk

Sockethead
02-04-2019, 04:59 AM
He needs a ball joint press but one with small adapters

Vas
02-04-2019, 05:10 AM
Wasn’t sure! Thought the ball joint was part of the rear trailing arm. You’re not looking for a pickle fork, are you?


Sent from my iPhone using TapatalkNope.

I was going to purchase a kit from Koch tools but it seems like they are no longer a company.

Sent from my Pixel 2 XL using Tapatalk

ZHPizza
02-04-2019, 07:17 AM
I have Spenser's subframe bushing tool kit that works for the rlca bushings/bearings too, but I'm in Canada all week :(

Vas
02-04-2019, 08:22 AM
I have Spenser's subframe bushing tool kit that works for the rlca bushings/bearings too, but I'm in Canada all week :(

sent a pm. Thanks :)

JETSET303
03-23-2019, 12:11 PM
Who currently has the fender roller? The 265s rub just a bit with the family in the car.


Sent from my iPhone using Tapatalk

danewilson77
03-24-2019, 09:26 AM
Shawn?

Sent from my Note 9 using Tapatalk

ELCID86
03-24-2019, 05:16 PM
Shawn?

Sent from my Note 9 using Tapatalk

Not this Shawn, I have not had it for some time. I thought it went out west (Midwest?).

danewilson77
03-24-2019, 06:40 PM
Mmmm

Sent from my Note 9 using Tapatalk

ELCID86
03-25-2019, 03:20 AM
Mmmm

Sent from my Note 9 using Tapatalk

Can you find the thread where it’s listed? Perhaps clues on who has it. I’ll check my PMS too.

danewilson77
04-19-2019, 03:32 PM
Can you find the thread where it’s listed? Perhaps clues on who has it. I’ll check my PMS too.Prestovie!

Sent from my Note 9 using Tapatalk

Dr Dynamite
09-09-2019, 01:56 PM
Someone have the differential removal/installing tool for rent?

Sent from my SM-G950U using Tapatalk

ELCID86
09-09-2019, 05:03 PM
Someone have the differential removal/installing tool for rent?

Sent from my SM-G950U using Tapatalk

The diff bushing(s)?

REF84
06-12-2022, 09:20 PM
Does anyone still have the rear differential mount pressing tool that theyre willing to rent?

HitchDoc
06-28-2022, 06:21 AM
Trying my luck before buying one, is the fender roller still available?