BavarianZHP
02-03-2013, 05:46 PM
I'm in the process of removing the driver's lock actuator on my E46 sedan and need to remove the two window clamp bolts. I've raised the window 140mm from the bottom so I can observe the two aluminum window clamp bolts (7-8mm hex). According to this link: http://www.youtube.com/watch?feature=player_embedded&v=x9Q2tfHqcdI#! there should be two 10mm bolts with normal threads. Mine are larger than 7mm, but smaller than 8mm. I tried US customary wrenches and they don't fit either. Are these bolts normal or reverse threaded? I would like to double-check with someone since my bolts are not 10mm. Thanks in advance!