What did you do for your ZHP/ BMW / MINI today? #2

[BavarianZHP]

I think the FedEx guy got a flat, looked at your performance tire, saw that you had insurance, pondered for a second and then said, "What the hell...."

[///Maniak]

I'm guessing it just didn't get loaded on the truck. Happens a lot, I bet(hope) you'll be fine. :)

[niart906]

I'm guessing it just didn't get loaded on the truck. Happens a lot, I bet(hope) you'll be fine. :)

I originally thought the same, but so far it hasn't turned up. When I was on the phone filing a claim they had a couple of people check the warehouse. Apparently there's a pile of unclaimed tires. Tires are shipped lashed together in twos, and the driver thinks that it may have snapped somewhere in transit. Only one of the two tires has a label on it. I'm just hoping it turns up, or else I'm facing another 7ish day wait while they ship me a new one.

[Chad44]

My shield went missing when the car was repainted, but as discussed I found it relatively useless, especially when they start to sag.
Also, it was too light out to check te output this morning, so I aimed everything tonight and I'm freaking thrilled... Left light is slightly dimmer than the left(need to trim the mount just a little more)
Before:
http://img.tapatalk.com/d/13/06/01/apa2e6at.jpg

After:
http://img.tapatalk.com/d/13/06/01/a3abesyr.jpg


Sent from Tapatalk

[danewilson77]

Looks great. New bulbs?

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[Tnhl1989]

Looks great. New bulbs?

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

No he dremel down the base where the bulb goes in by 1/8th of a inch. The bulb wasn't sitting flush to where it was suppose to be. As per Joop DIY.

[///Maniak]

I let my car get hail damage today. I'm a bad ZHP owner.

[JupiterBMW]

I let my car get hail damage today. I'm a bad ZHP owner.

Are you shittin' me? Its JUNE!!! You gotta move South bro!

[cakM3]

I let my car get hail damage today. I'm a bad ZHP owner.

That sucks Ben....:(

[///Maniak]

Are you shittin' me? Its JUNE!!! You gotta move South bro!

Tell me about it. I wish that were an option!


That sucks Ben....:(

Thanks Charlie.

[Imola.ZHP]

=-(

Sorry to hear, the weather has been so crazy lately, my home state (OK) got another 4 tornado's today.

-----

I removed my hood liner a few hours ago, its actually not in that bad of shape. I'll put it in the attic incase I ever need it (or someone else needs it).

[das boots]

I'm watching now the tornado system going through OK city and suburbs with FNC. Really bad system hitting the same area as like two weeks ago......

[3ZHP]

Sharing the Bubbles, they took a bath together.

http://i591.photobucket.com/albums/ss351/3zhpguy/BMW/323I/Family/20130531_His-n-Hers-wash_0004-Edit.gif (http://s591.photobucket.com/user/3zhpguy/media/BMW/323I/Family/20130531_His-n-Hers-wash_0004-Edit.gif.html)

[Chad44]

Looks great. New bulbs?

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

Same bulbs, I had a burnt zkw on drivers side and retrofitted e90 reflector on passenger that didn't work right because I had to modify the bowl to hold the bulb at the correct depth.
Last night I overhauled the e90 bowl install, got it right and then copied and pasted into the driver side.


Sent from Tapatalk

[Chad44]

Saw after I posted that tony shared some details also.


Sent from Tapatalk

[JupiterBMW]

Pics of both cars, please. You know the rules.


^ with that guy, love your x3 M-Sport. It's on the "short list" for replacing our Honda CR-V.

Tomorrow... Gonna hose off the ZHP in the morning and try and do a few more pics with my bro's car... :)

[jgt_zhp]

Hauled several boxes in from the porch....oil and filters for the 325 tomorrow. Clear front reflectors, fog light trim, euro mirror lenses and a new tail light for the ZHP. Oh, also picked up a sweater shaver at Walmart for my alcantara renovation.

8764

[Crestwood1001]

Quick question guys, changed my expansion tank Thursday. No leaks, ran it until today with no leaks, today I turned the ac on and it spit some coolant, no biggie I checked everything and cleaned it up to pin point the leak. Seems to be coming from the smaller of the two openings on the upper rad hose. Its a new hose and new Et. Any idea why it would be dripping? It's a very slow leak and once it's dripped a bit it stops until the car cools down and then starts back up....

Sent from my SCH-I535 using Tapatalk 4 Beta

[Stigissimo]

Just recieved my Coby wheel and boots.... oh mah gawd. Installed within the hour of receiving them.

[Tnhl1989]

You know you can't just post that and not add photos :p

[Stigissimo]

I know I know.... I didn't have a chance. Tomorrow!

[WOLFN8TR]

Quick question guys, changed my expansion tank Thursday. No leaks, ran it until today with no leaks, today I turned the ac on and it spit some coolant, no biggie I checked everything and cleaned it up to pin point the leak. Seems to be coming from the smaller of the two openings on the upper rad hose. Its a new hose and new Et. Any idea why it would be dripping? It's a very slow leak and once it's dripped a bit it stops until the car cools down and then starts back up...

Did you Pre Lube all of the orings inside the hoses and Exspansion Tank before putting it together? Use anitfreeze or oring lube.


Gary

[330i ZHP]

I just caught up with 4 days of this thread...lots of good stuff

best idea - the heated screwdriver for removing a plastic screw.

LED lights - why would you want your plate more visible?

[330i ZHP]

I replaced the oem xenon bulbs the other night with the Osram cool blue - per Hermes

noticeable difference - I haven't driven the car yet with them

Been working on removing the ceiling and redoing the structure in my garage so I can use the lift with the x5

[niart906]

^You haz lift??

You sir have made me very jelly. The things I could do with a lift... :respect

[danewilson77]

Just recieved my Coby wheel and boots.... oh mah gawd. Installed within the hour of receiving them.


I know I know.... I didn't have a chance. Tomorrow!

Superb product and customer service, no?

[nike001]

Maintenance is so much easier when you have a lift...

Just changed diff fluid
8770

[Hornung418]

Are you shittin' me? Its JUNE!!! You gotta move South bro!

Hail only happens in the summertime...it's the product of anvil thunderclouds.

Sorry to hear the damage report, Ben :(

From a GS3, this was sent.

[Crestwood1001]

Did you Pre Lube all of the orings inside the hoses and Exspansion Tank before putting it together? Use anitfreeze or oring lube.


Gary

Yes that's why I'm confused

Sent from my SCH-I535 using Tapatalk 2

[Torxuvin]

Maintenance is so much easier when you have a lift...

Just changed diff fluid
8770

:drool

[WOLFN8TR]

Maintenance is so much easier when you have a lift...

Just changed diff fluid
8770

That's Cheating....I'm sooo Jealous!


Gary

[jgt_zhp]

Just finished the oil service maintenance on the 325. That Bavarian Autosport oil sucker outer really works like a champ. All that's left is to return the old oil to Walmart, and see if they're smart enough to recycle it, or if they put it back on the shelf.

ZHP got replacement OEM taillight (ouch) to replace a foggy one with two rows of LEDS out. Also clear front bumper reflectors. Not all that impressed with those, especially since I managed to put a nice little crack in one of them while installing. Should have went with painted. Got half the fog light trim on, since they backordered one side.

And installed the Bimmian Euro mirror lenses. They look nice, and the swapout was easy peasy once you reconcile in your head that when they say the lens is for the "R" side, its really the one for the "L" side.

Last task for the day - the ZHP needs a bath. Got a date tonight, going to see "Spamalot" at the outdoor amphitheater. Most hilarious Broadway show ever, IMHO.

[Whitexi]

Today my oil bottle holders arrived. They have Velcro backing a so they stick to the inside liner. I'm glad I got them, the clutter is down lol.

http://img.tapatalk.com/d/13/06/02/nuqu2ate.jpg
http://img.tapatalk.com/d/13/06/02/qa6y2e7y.jpg

[Crestwood1001]

Today my oil bottle holders arrived. They have Velcro backing a so they stick to the inside liner. I'm glad I got them, the clutter is down lol.

http://img.tapatalk.com/d/13/06/02/nuqu2ate.jpg
http://img.tapatalk.com/d/13/06/02/qa6y2e7y.jpg

I have one too, did yours come with the gloves and paper funnel? Nice little bag from bmw

Sent from my SCH-I535 using Tapatalk 2

[Whitexi]

I have one too, did yours come with the gloves and paper funnel? Nice little bag from bmw

Sent from my SCH-I535 using Tapatalk 2

Yes it did, I was sold when I read they had Velcro backing.

[E_Rak]

Just recieved my Coby wheel and boots.... oh mah gawd. Installed within the hour of receiving them.

I'm coming over, RIGHT NOW.

In other news, started the car for the first time in ten days :eeps pardon her dirty undersides...


https://www.youtube.com/watch?v=ZUi1NE0s6Ts

[midlandtech]

Got the car washed and detailed this morning then met up with the KC CCA for a rally/scavenger hunt ending at the park for a picnic. One if the guys hauled his canoe with his beater.
87798780

[jgt_zhp]

Dang. Forgot that was today. I was thinking about going. Haven't had a chance to get involved with CCA KC yet

[JupiterBMW]

Got the car washed and detailed this morning then met up with the KC CCA for a rally/scavenger hunt ending at the park for a picnic. One if the guys hauled his canoe with his beater.

Holy crap, best pics ever... That guys win an award for being awesome!

[cakM3]

Yeah..... calling a 1M a beater..... yeah....

Sent from my DROID RAZR MAXX HD using Tapatalk 2

[midlandtech]

Holy crap, best pics ever... That guys win an award for being awesome!

Pretty Bauce move hauling a canoe with your M especially when its longer than the car by several feet.

Love seeing people using their cars like this

[danewilson77]

:respect

[Chad44]

It also doubles as a hail deflector if you're caught in a storm!


Sent from Tapatalk

[Imola.ZHP]

Love seeing people using their cars like this

x2!

Is it bad that I want to see him doing this with the canoe on it?

http://youtu.be/lEvpnKRLDO4

and then this...

http://youtu.be/15bQjiwzgUA

[ryankokesh]

Got my DISA all fixed up today with the GAS kit. The old one was actually in great condition, but I figured I'd just rather have the permanent solution and not worry about it.

Instructions were great, so install was non-eventful. Hardest part was getting the old seal out.


Sent from my iPhone using Tapatalk

[jgt_zhp]

Well, y'all are stuck with me now. Thanks, Bruce.

And when the state of Kansas finally coughs up my JGT ZHP license plate, it's got legal backing as well

8786

[danewilson77]

Nice rep!

[JupiterBMW]

x2!

Is it bad that I want to see him doing this with the canoe on it?

http://youtu.be/lEvpnKRLDO4

and then this...

http://youtu.be/15bQjiwzgUA

Holy crap, I actually held my breath with the 2nd one...

[Crestwood1001]

Washed it and fixed a small coolant leak


Sent from my SCH-I535 using Tapatalk 2

[330i ZHP]

joop wants imola?

[Stigissimo]

joop wants imola?

everybody wants imola ;)

[330i ZHP]

catch me red...

I saw an X5M the other day in Imola...damn sexy

[Johal E32]

Drove it this morning to Oakland (yep, I took it to the hoody part as well :rofl) Parked it on the street, and I was pretty sure something was gonna get vandalized, perhaps someone might end up stealing my wheels.. Then my friend pulls up and parks his Aston Martin right around the corner and I suddenly don't care anymore..

I got back home a few hours later, everything on the car is fine, and I look in the garage a few hours later and my wagon has pissed out like 1/2 of its coolant! I pop the hood, the bleeder screw was broken, and it F'd up my expansion tank because the screw broke off in the expansion tank :(

[Tnhl1989]

Spraying the diffuser

8800

[danewilson77]

joop wants imola?

That's the word on the street.

[Sockethead]

I got back home a few hours later, everything on the car is fine, and I look in the garage a few hours later and my wagon has pissed out like 1/2 of its coolant! I pop the hood, the bleeder screw was broken, and it F'd up my expansion tank because the screw broke off in the expansion tank :(

Just heat up the tip of a screw driver and melt it into the broken part and unscrew....

[midlandtech]

Holy crap, I actually held my breath with the 2nd one...

Lol I think it's funny he is wearing a helmet....

[webster]

i really need to wash my car, it's covered in water spots from recent rain, and the wheels are grimed up, but it's just sooo hot outside, and we're supposed to get more showers in the next day or so. bah.

and i'm still pissed about the long scratch on the side of my car. not sure that can be fixed without a $$$ paint correction.

also i have a giant pull to the left, that was diagnosed months ago as tire wear, but i'm not sure that i buy that tire wear alone could cause such a pull. might be something in the suspension, and i've also contemplated that maybe the steering wheel is one click off center from having been removed when i had water damage a few months ago. haven't disassembled fully to inspect tho.

other than the pull, she's driving like a champ and i love every second. will need brakes soon enough tho, i can tell they're starting to wear thin.

[Johal E32]

Wait.. Maybe I dont need a new expansion tank.. Isnt the bleeder screw a part of the upper radiator hose? Maybe I can just get a new upper rad hose and expansion tank cap..

[johnrando]

Got gas. 1 mile left. Eeesh!

Sent from my DROID4 using Tapatalk 4 Beta

8802


Sent from my DROID4 using Tapatalk 4 Beta

[E_Rak]

Wait.. Maybe I dont need a new expansion tank.. Isnt the bleeder screw a part of the upper radiator hose? Maybe I can just get a new upper rad hose and expansion tank cap..

Yes, but replace everything if you want to be on the safe side.

[Johal E32]

Yes, but replace everything if you want to be on the safe side.


Expansion tank is maybe 18 months old as well as the hoses. I guess the screw bleeder screw just broke off in the upper hose because its pretty crappy quality even though its genuine BMW.

I think I will be fine with just a new upper rad hose, et cap, and a bleeder screw.

[E_Rak]

aha, in that case those items should be just fine :thumbup

[johnrando]

everybody wants imola ;)

:rolleyes :)

[SoCalZman]

http://img.tapatalk.com/d/13/06/02/eryjajyn.jpg

Washed, waxed, and under its new "home" (no more garage spot :( )

[Crestwood1001]

Expansion tank is maybe 18 months old as well as the hoses. I guess the screw bleeder screw just broke off in the upper hose because its pretty crappy quality even though its genuine BMW.

I think I will be fine with just a new upper rad hose, et cap, and a bleeder screw.

Get a new upper hose, and get a brass bleeder screw, only like 2 bucks more, I just installed one.

[330i ZHP]

Speaking of BMW car covers - I have an OEM BMW E46 car cover - I used it for my sedan and I think it fits coupe.

It is yours if you are local (or Kris)...it is hefty and wouldn't want to guess what shipping would cost

Free to first taker to come and get it

[trancenation]

Washed, waxed, and under its new "home" (no more garage spot :( )

It sucks not to have garage parking in SF. Might want to secure that car cover down and mark your license plate on it so that no one takes it away from you!

[SoCalZman]

It sucks not to have garage parking in SF. Might want to secure that car cover down and mark your license plate on it so that no one takes it away from you!

Yeah it does. I have a few things working for me though. My street is a dead end so it's quiet. It's also extremely steep (my camera is tilted as well), and as you can see I have perpendicular parking on the street. I have a lock for the car cover I will be putting on in a few minutes.

What do you mean "mark" my license plate?

[fredo]

everybody wants imola ;)

+1. Count me in !

[ELCID86]

I think he means Sharpie or stencil your tag number on the cover NorCal. Additional Theft deterrent.


Shawn in VA.
Via thumbs and Tapatalk.

[SoCalZman]

I think he means Sharpie or stencil your tag number on the cover NorCal. Additional Theft deterrent.


Shawn in VA.
Via thumbs and Tapatalk.

ohhhh ok. Yeah I just read that in the directions. Good idea. I will take a trip to the arts n crafts store tomorrow for some paint and stencils. Directions say to only use "fabric/t-shirt" paint.

Also, who the hell steals a car cover? geez, this world....

[Johnmadd]

Speaking of BMW car covers - I have an OEM BMW E46 car cover - I used it for my sedan and I think it fits coupe.

It is yours if you are local (or Kris)...it is hefty and wouldn't want to guess what shipping would cost

Free to first taker to come and get it

Me me me! Ehemmm, may I have dibs?

[Tnhl1989]

Me me me! Ehemmm, may I have dibs?

Second :)

[Imola.ZHP]

everybody wants imola ;)

Truth!


catch me red...

I saw an X5M the other day in Imola...damn sexy

Individual?! I know they are available in Melbourne, but didn't realize you could get Imola. NICE!


Spraying the diffuser


Plasti-dip? Mine could probably use a coat.

----------------------

Either the bulb or the ballast (I'm betting the ballast) has finally quit working on my passenger side headlight. It's been acting crazy since ownership, every now and then it wouldn't come on, then I could wait a few minutes, turn them off and back on it and it would pop on. This started out as a few times per year, then double that amount the following year, and increased and increased over the course of over 7 years to the point now where it doesn't come on at all, no matter what I do.

Any suggestions? Are the ballasts different between the two different types of headlights they put on face-lifted e46 sedans?? I'm bad with names, but I have the headlights that everyone wants already. Does anyone have one laying around they would let go of?

I'm going to go swap the bulbs just to make sure it isn't a bulb issue, but I really think its the ballast on that side, I don't think it would take 7 years for the bulb to go out. I could be wrong though, it wouldn't be the first time.

Thanks!

[WOLFN8TR]

8802

Dam!

[Imola.ZHP]

I searched and cannot find any results, have any of your guys mounted your radar detectors from your rear-view mirror?

Now that my windshield is tinted, the tint shop told me to find a new solution for my radar detector, no more suction cups.

I'm searching and not having too much luck. I like the following mount...

http://maxcdn.nexternal.com/mgt/images/bmw-bbe-74.jpg

But its $132 shipped!

Then I found this one...

http://www.e90post.com/forums/attachment.php?attachmentid=142424&stc=1&d=1207257137

It's $69 shipped, but I prefer how the first mount angles back towards the glass so that the detector isn't sticking out into randomly into the car.

Thoughts? Any other suggestions?

[JupiterBMW]

Today I installed my HID foglight kit. Full write up coming, with pics of course. :)

[328ioc]

I searched and cannot find any results, have any of your guys mounted your radar detectors from your rear-view mirror?

Now that my windshield is tinted, the tint shop told me to find a new solution for my radar detector, no more suction cups.

I'm searching and not having too much luck. I like the following mount...

http://maxcdn.nexternal.com/mgt/images/bmw-bbe-74.jpg

But its $132 shipped!

Then I found this one...

http://www.e90post.com/forums/attachment.php?attachmentid=142424&stc=1&d=1207257 137

It's $69 shipped, but I prefer how the first mount angles back towards the glass so that the detector isn't sticking out into randomly into the car.

Thoughts? Any other suggestions?

I have been researching these mounts as well but I have no further info for you.

I will send you any mode info I find though.

Sent from my DROID RAZR using Tapatalk 2

[kayger12]

Greased the sunroof with some Tri-Flow.

[Imola.ZHP]

I have been researching these mounts as well but I have no further info for you.

I will send you any mode info I find though.

Sent from my DROID RAZR using Tapatalk 2

Thanks...

It probably seems crazy, but after sitting in the car holding the detector in both places, I think I'm going to go with the more expensive one. Its only a few inches difference, but it looks odd sticking out into the interior of the car from nowhere. The more expensive will tuck it back under the mirror and look better. I'm going to look around some more though for other options. I don't like the visor idea because if the passenger needs the visor, then it must come down.

[danewilson77]

I searched and cannot find any results, have any of your guys mounted your radar detectors from your rear-view mirror?

Now that my windshield is tinted, the tint shop told me to find a new solution for my radar detector, no more suction cups.

I'm searching and not having too much luck. I like the following mount...

http://maxcdn.nexternal.com/mgt/images/bmw-bbe-74.jpg

But its $132 shipped!

Then I found this one...

http://www.e90post.com/forums/attachment.php?attachmentid=142424&stc=1&d=1207257137

It's $69 shipped, but I prefer how the first mount angles back towards the glass so that the detector isn't sticking out into randomly into the car.

Thoughts? Any other suggestions?

Grab the cheaper mount and try to mod it to a different position? :dunno

[Stigissimo]

I searched and cannot find any results, have any of your guys mounted your radar detectors from your rear-view mirror?

Now that my windshield is tinted, the tint shop told me to find a new solution for my radar detector, no more suction cups.

I'm searching and not having too much luck. I like the following mount...

http://maxcdn.nexternal.com/mgt/images/bmw-bbe-74.jpg

But its $132 shipped!

Then I found this one...

http://www.e90post.com/forums/attachment.php?attachmentid=142424&stc=1&d=1207257137

It's $69 shipped, but I prefer how the first mount angles back towards the glass so that the detector isn't sticking out into randomly into the car.

Thoughts? Any other suggestions?

Howabout a sun visor mount?

[Tnhl1989]

Better off 3D printing it. They usually only charge material and time. Shouldn't be more than 80.

http://www.shapeways.com/

[Imola.ZHP]

Grab the cheaper mount and try to mod it to a different position? :dunno

I did some searching, I got $5 off for sharing on FB (included in the $131 I already posted), then found a coupon for another $16 off. I went ahead and ordered it.


Howabout a sun visor mount?

I don't always have passengers, but if I did and they needed to use the visor, then the detector would have to come down.


Better off 3D printing it. They usually only charge material and time. Shouldn't be more than 80.

That would have been fantastic! Oh well, I already ordered one. Thanks for the idea though!

----

I still need to work on my headlights, funny how you loose 3-4 hours researching radar detector mounts.

[Johal E32]

aha, in that case those items should be just fine :thumbup

Yeah, I hope so!

I will probably order the parts next week from an online BMW dealer. In the meantime I'll just let her rest in the garage.

[Avetiso]

Better off 3D printing it. They usually only charge material and time. Shouldn't be more than 80.

http://www.shapeways.com/

What the flip? Is that really becoming a viable option for things?

[Imola.ZHP]

^ x2

[328ioc]

I did some searching, I got $5 off for sharing on FB (included in the $131 I already posted), then found a coupon for another $16 off. I went ahead and ordered it.



I don't always have passengers, but if I did and they needed to use the visor, then the detector would have to come down.



That would have been fantastic! Oh well, I already ordered one. Thanks for the idea though!

----

I still need to work on my headlights, funny how you loose 3-4 hours researching radar detector mounts.

Please take pics of it mounted.

I am going to pick up a new RD soon so that's what I am researching for.

Sent from my DROID RAZR using Tapatalk 2

[JupiterBMW]

Marcus, Devlin, others...

Looking at those two pics, it shows the one detector (the more desirable, tucked away) mounted onto a car with the RLS (the big black unit on the windshield)... The other one is mounted on a car without the RLS. Sooo, you might be stuck with one location based on what type of rearview mirror you have. I'm just saying, be prepared if its not exactly like the the images...

Either way, its a great looking mounting option, way classier than suction cups, and can prolly be modded like Dane mentioned. Very nice!

[alexandre]

I swapped out my steering coupler and my swaybar endlinks. The latter were one heck of a PITA... 100k miles of crap and rust warranted generous use of PB Blaster. And I washed it after I was done with that.

I'll drain the oil Thursday and refill with 0W30, and I should be done with maintenance for the summer.

[gr330zhp]

New sway bar end links today and lifted the rear coilovers a hair. Alignment tomorrow and it's all ready for the drive up to Canada for F1 weekend! :)


Sent from my iPhone 5.

[alexandre]

^ we're doing the same maintenance for the same drive... But opposite directions ;) I'm leaving tomorrow!

[gr330zhp]

^ we're doing the same maintenance for the same drive... But opposite directions ;) I'm leaving tomorrow!

Sending a PM!


Sent from my iPhone 5.

[az3579]

Yeah..... calling a 1M a beater..... yeah....

Sent from my DROID RAZR MAXX HD using Tapatalk 2

You're the one to talk... calling your ZHP a beater. :shifty


Today I compounded, polished, and sealed the hood and roof. Took half a day... ridiculous. It's gonna take me all week to detail this car... :(

[cakM3]

You're the one to talk... calling your ZHP a beater. :shifty

BP...you can't compare a ZHP to a 1M...

Sent from my DROID RAZR MAXX HD using Tapatalk 2

[danewilson77]

Finished up car today with M105, then a nice coat of wax. Cleaned rims.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[jgt_zhp]

Finished up car today with M105, then a nice coat of wax. Cleaned rims.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

Hmmm...we can almost PICTURE how good it must look

[danewilson77]

Hmmm...we can almost PICTURE how good it must look

:rofl

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[danewilson77]

Just for you. 3 pics. Last pic I got out of bed in my skivvies to take. Wife now knows I'm insane.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/PicsArt_1370222714154-1.jpg (http://s1015.photobucket.com/user/nicee46/media/Maintenance%20and%20Misc/PicsArt_1370222714154-1.jpg.html)

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/PicsArt_1370222770863.jpg (http://s1015.photobucket.com/user/nicee46/media/Maintenance%20and%20Misc/PicsArt_1370222770863.jpg.html)

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/PicsArt_1370222810823.jpg (http://s1015.photobucket.com/user/nicee46/media/Maintenance%20and%20Misc/PicsArt_1370222810823.jpg.html)

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[ryankokesh]

:drool


Sent from my iPhone using Tapatalk

[jgt_zhp]

Just for you. 3 pics. Last pic I got out of bed in my skivvies to take. Wife now knows I'm insane.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/PicsArt_1370222714154-1.jpg (http://s1015.photobucket.com/user/nicee46/media/Maintenance%20and%20Misc/PicsArt_1370222714154-1.jpg.html)

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/PicsArt_1370222770863.jpg (http://s1015.photobucket.com/user/nicee46/media/Maintenance%20and%20Misc/PicsArt_1370222770863.jpg.html)

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/PicsArt_1370222810823.jpg (http://s1015.photobucket.com/user/nicee46/media/Maintenance%20and%20Misc/PicsArt_1370222810823.jpg.html)

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

Thanks, boss. Looks spectacular, as we all knew it would.

And special thanks for no shots of you in your skivvies.

[danewilson77]

Thanks, boss. Looks spectacular, as we all knew it would.

And special thanks for no shots of you in your skivvies.

:caseyshrug

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[kayger12]

And special thanks for no shots of you in your skivvies.

:rofl

Sent from the Last Next Best Thing.

[JupiterBMW]

And special thanks for no shots of you in your skivvies.

Ahh geezus, the mental image alone... I'm freaking blind!!!




As for me... Well, updated my project thread.... No, I didn't add pics... But I did add a VIDEO

:biggrin

Pics to accompany video coming soon.

[330i ZHP]

Me me me! Ehemmm, may I have dibs?

Where are you in VA? I do not want to deal with shipping...too lazy I think.

Let me know...the local that said they would come this AM at 11 blew me off...who does this when they have been complaining about their car sitting in the sun a lot

[JupiterBMW]

Where are you in VA? I do not want to deal with shipping...too lazy I think.

Let me know...the local that said they would come this AM at 11 blew me off...who does this when they have been complaining about their car sitting in the sun a lot

Man, this kinda irritates me! I'd have driven to your house 3 times over if I was local by now... I would love one of these!

You by chance have a sunshade you do want to ship?? :biggrin

Also, Stu, did you get your auto windows all taken care of after you pulled the key and got out of the car? I got it all coded on mine, can assist with the right line items if you need.

[330i ZHP]

Joop - it pissed me off when he didn't show or call or text. and I took the time to text him this afternoon, he overslept and then didn't have time to come up - had a cookout to attend

[johnrando]

Thanks, boss. Looks spectacular, as we all knew it would.

And special thanks for no shots of you in your skivvies.

+1000 on both counts. :)

[Hermes]

You by chance have a sunshade you do want to ship?? :biggrin

you don't want the official sunshade, it doesn't fit quite right

http://i29.photobucket.com/albums/c288/jhermes/eae139da.jpg

hell, it fits the E38 better so it's in that car now

[az3579]

BP...you can't compare a ZHP to a 1M...

Sent from my DROID RAZR MAXX HD using Tapatalk 2

Yes you can. They're both rare and amazing cars in every single way. :shifty

Sent from my DROID RAZR MAXX HD

[danewilson77]

Where are you in VA? I do not want to deal with shipping...too lazy I think.

Let me know...the local that said they would come this AM at 11 blew me off...who does this when they have been complaining about their car sitting in the sun a lot

Williamsburg. He lives about 4 miles from me.

[Tnhl1989]

For some reason this thread doesn't display in my browser when I am logged in on any desktop. Works when I am not logged in though. This also happens on the what did you do thread as well. Strange stuff IMO.

[danewilson77]

:dunno

I'm on a desktop now.

[Tnhl1989]

Yep I try loading it on my computer at work using chrome. Shows nothing. Every other thread works. Kinda funny.

[danewilson77]

Yep I try loading it on my computer at work using chrome. Shows nothing. Every other thread works. Kinda funny.

Isolated issue. I use chrome as well.

[Dave_B]

Yes you can. They're both rare and amazing cars in every single way. :shifty

Sent from my DROID RAZR MAXX HD

But the ZHP is not special... :ninja

[Imola.ZHP]

Drove to work, on the way (5 minute commute) my windshield washer fluid level light came on. I just topped it off last week so either the dealer drained it for some reason when they installed my windshield, or I spring a leak somewhere...

One thing gets fixed and two more things break. DOES IT EVER END?!

Here is my list...

-- FCABS (purchased, need installed)
-- CA's (need to be purchased and installed)
-- End links (need to be purchased and installed, but no one seems to know if I need adjustable's with my sport cup kit or not)
-- Tie rod ends (need to be purchased and installed)
-- Rear tire (need to order, and have mounted and balanced)
-- 4 wheel alignment (needs done after all of the above is purchased and installed)
-- Headlight ballast (needs to be purchased and installed)
-- Windshield washer fluid tank and or hose needs replaced, and then refilled.
-- City inspection needs
-- Tag is due this month
-- Oil Change coming up soon
-- Diff is still dripping
-- Needs washed
-- Needs waxed
-- Leather needs conditioned

In the past
Week...
-- Replaced faulty coolant hose, refilled with BMW coolant and distilled water, bled off air
-- New windshield, trim, cowl, etc
-- Technician cleared my airbag light
Month...
-- New RTAB's installed (still need an alignment)

I need to hit the lotto

[Pip]

Gave her somewhere to sleep at night. I need a couple 2x4s though because I can't drive straight into the garage - too low. When it is just my car no problem because I can drive in at an angle, but it won't be just my car for long.

8840

[Johnmadd]

Where are you in VA? I do not want to deal with shipping...too lazy I think.

Let me know...the local that said they would come this AM at 11 blew me off...who does this when they have been complaining about their car sitting in the sun a lot

I live in Williamsburg and work in Richmond. I have no shade and no garage, this would be awesome for me. I can make plans to meet this upcoming weekend, ill shoot you a pm.

[danewilson77]

You have a garage 4 miles from you brutha!!!!

[Tnhl1989]

If that the case shoot it up here ;)

[Johnmadd]

You have a garage 4 miles from you brutha!!!!

Haha, thanks! Where will the imola rest then?

[danewilson77]

Haha, thanks! Where will the imola rest then?

Wait. What?

What are we talking about here?

[Hornung418]

Picking up Stuart's car cover.

From a GS3, this was sent.

[Johnmadd]

Wait. What?

What are we talking about here?


Picking up Stuart's car cover.

From a GS3, this was sent.

Yes, my zhp hopefully will have a sleeping bag. Almost as good as Dane's offer :biggrin

[das boots]

you don't want the official sunshade, it doesn't fit quite right

http://i29.photobucket.com/albums/c288/jhermes/eae139da.jpg

hell, it fits the E38 better so it's in that car now

+1. Needs an additional 3" on top for a Sedan. The Coupe might have a different rake on the windshield. Might need more than 3". Trying to figure out how to supplement the missing gap. If not, looking for another shade from a different model code that would fit an E46.

[SoCalZman]

That is crazy. They advertise it as FOR the E46 and that fitment looks horrible. Ugh and I just ordered the sunshade a few days ago. I am glad I am getting 3M crystalline tint on my car in the next week or so. Its pricey, but with that and the sunshade my interior should last a long time even when parked outdoors.

edit: and yet it looks like it fits ok in the "official" picture from BMW: http://www.trademotion.com/sfimages/214336/partImages/4462/SFPLImage86712.jpg

[das boots]

Me thinks they used a different shade to make it look like it is form fitting. Anybody here works in a BMW Parts Dept. to do a fitting comparison on heightwise? Will be greatly appreciated.

[kayger12]

+1. Needs an additional 3" on top for a Sedan. The Coupe might have a different rake on the windshield. Might need more than 3". Trying to figure out how to supplement the missing gap. If not, looking for another shade from a different model code that would fit an E46.

Never measured it but that looks similar to the gap I have on the coupe.

Sent from the Last Next Best Thing.

[Avetiso]

Perhaps it's supposed to sit in the slit we have running across our dash?

[kayger12]

Perhaps it's supposed to sit in the slit we have running across our dash?

Little stroke of genius right there.

I just tried it. It fits the height perfectly that way.

Sent from the Last Next Best Thing.

[Hermes]

^ no way if the brochure pic is to be believed, that is all the way at the bottom of the window

edit: since Keith posted at the same time I did...

Keith, can you take a pic to see if it looks the same as the pre-facelift pictured? If so, I'm re-positioning it back in the E46

[kayger12]

^ no way if the brochure pic is to be believed, that is all the way at the bottom of the window

edit: since Keith posted at the same time I did...

Keith, can you take a pic to see if it looks the same as the pre-facelift pictured? If so, I'm re-positioning it back in the E46

Doesn't sit perfectly flat, but here you go.

http://i1234.photobucket.com/albums/ff401/Kayger12/20130603_204213_zps5663530f.jpg



Sent from the Last Next Best Thing.

[das boots]

That said, if laid flat all the way to the bottom and side to side, then it will be short height wise.

[SoCalZman]

they did some "shady" (hehe) angles with the brochure picture to make the windshield wipers hide the fact that the shade doesn't go all the way down. So it looks like part of our dash is still going to get some sun.

[kayger12]

they did some "shady" (hehe) angles with the brochure picture to make the windshield wipers hide the fact that the shade doesn't go all the way down. So it looks like part of our dash is still going to get some sun.

Exactly.

Only options seem to be expose the front of the dash or have that big gap at the top of the windshield.

Sent from the Last Next Best Thing.

[Johal E32]

https://www.heatshieldstore.com/

I have one of these. It's ugly but it does its job effectively and it fits well. It's a PITA to roll it up every-time when you get into your car but it really helps keep some heat out and it protects your dashboard pretty well.

I would prefer a BMW folding sun shield like the one JP folded but they don't fit too well..

[gr330zhp]

I have a sunshade from Walmart in both the E46 and E38. Fits fine and paid $10 each :dunno


Sent from my iPhone 5.

[kayger12]

https://www.heatshieldstore.com/

I have one of these. It's ugly but it does its job effectively and it fits well. It's a PITA to roll it up every-time when you get into your car but it really helps keep some heat out and it protects your dashboard pretty well.

I would prefer a BMW folding sun shield like the one JP folded but they don't fit too well..

Was looking at one of those for the CX-5.

Sent from the Last Next Best Thing.

[JupiterBMW]

https://www.heatshieldstore.com/

I have one of these. It's ugly but it does its job effectively and it fits well. It's a PITA to roll it up every-time when you get into your car but it really helps keep some heat out and it protects your dashboard pretty well.

I would prefer a BMW folding sun shield like the one JP folded but they don't fit too well..

I had one of these in my last car, fit was excellent. The only issue is that after quite a few years, it somehow got air inside and it would puff up when in the windshield for a while... Wouldn't be too hard to put some slits in the sides to prevent it, I just never did. It just made it even more PITA to roll up... Oh well... Still a worthwhile purchase in my eyes. I might do this again if the OEM one doesn't fit too well.

[Johal E32]

Was looking at one of those for the CX-5.

Sent from the Last Next Best Thing.

I'd get it. It's a pretty solid product, its worth rolling it up every time, at least you are protecting your interior and keeping some heat out.


I had one of these in my last car, fit was excellent. The only issue is that after quite a few years, it somehow got air inside and it would puff up when in the windshield for a while... Wouldn't be too hard to put some slits in the sides to prevent it, I just never did. It just made it even more PITA to roll up... Oh well... Still a worthwhile purchase in my eyes. I might do this again if the OEM one doesn't fit too well.

Hmm. Mine hasn't puffed up yet.. It is a few years old but it's holding up very well.

[johnrando]

I have the springy kind that you bend/fold (from Brookstone) and it fits the windshield OK (but barely). Worth getting if they still have them.

[kayger12]

I'd get it. It's a pretty solid product, its worth rolling it up every time, at least you are protecting your interior and keeping some heat out.

Good deal. Appreciate the info.

Sent from the Last Next Best Thing.

[jgt_zhp]

Well, heck, just when you think you were almost caught up on your chores, it's Detailers Domain to the rescue. Now if I could just decide on what products I want to go with, we could amp up the awesomeness of the Imola a couple notches

8865

[328ioc]

Finally got my 6LED license plate bulbs in.

First pic is the old 3LED bulbs and second pic is 6LEDs.

NOTE: Driver side bulb in first picture was aimed incorrectly causing it to appear darker than the other side.

8872

8873
Sent from my DROID RAZR using Tapatalk 2

[Johnmadd]

Finally got my 6LED license plate bulbs in.

First pic is the old 3LED bulbs and second pic is 6LEDs.

NOTE: Driver side bulb in first picture was aimed incorrectly causing it to appear darker than the other side.

8872

8873
Sent from my DROID RAZR using Tapatalk 2

Good job, now the police can see it better.

[JupiterBMW]

Finally got my 6LED license plate bulbs in.

First pic is the old 3LED bulbs and second pic is 6LEDs.

NOTE: Driver side bulb in first picture was aimed incorrectly causing it to appear darker than the other side.

Looks good buddy. Nicely done.

[328ioc]

Looks good buddy. Nicely done.

Thanks dood.

Been trying to install them since Friday but this rain is pissing me off.

Sent from my DROID RAZR using Tapatalk 2

[E_Rak]

Good job, now the police can see it better.

I never quite understood the fascination with bright license plate bulbs...

[328ioc]

I never quite understood the fascination with bright license plate bulbs...

They arnt much brighter than stock. Just a different color.

Sent from my DROID RAZR using Tapatalk 2

[LivesNearCostco]

Replaced FSR (final stage resistor) today, zip tied passenger window regulator yesterday.

[kayger12]

They arnt much brighter than stock. Just a different color.

Sent from my DROID RAZR using Tapatalk 2

+1

Sent from the Last Next Best Thing.

[Imola.ZHP]

Found my windshield washer tank leak (I think). Seems that the grommet that at some point was supposed to have a strainer on it is crumbling. $2.80 from ECS, maybe this will get me to go ahead and order the other stuff I need from there (CA's, end links, tie-rod ends).

[Ryans323i]

Well, heck, just when you think you were almost caught up on your chores, it's Detailers Domain to the rescue. Now if I could just decide on what products I want to go with, we could amp up the awesomeness of the Imola a couple notches

8865

Awesome. I like to use M105, M205, Griots Garage One step sealant, Griots Garage Best in show wax, fwiw. The first two because they're proven to work and easy to use. The GG products because I can by them at Advance Auto, they're easy to use, and I love the results.

[jgt_zhp]

Awesome. I like to use M105, M205, Griots Garage One step sealant, Griots Garage Best in show wax, fwiw. The first two because they're proven to work and easy to use. The GG products because I can by them at Advance Auto, they're easy to use, and I love the results.

Thanks for the tips!!! There's SOOOO many products out there, and a guy can get lost pretty quick trying to sort through them all. It's nice to hear what's working in the real world.

[Johal E32]

m105/m205 is a very good paint correction setup to use!

[Pip]

Negotiating a purchase of a TSE3 cat-back exhaust for the ZHP.

[ELCID86]

Thanks for the tips!!! There's SOOOO many products out there, and a guy can get lost pretty quick trying to sort through them all. It's nice to hear what's working in the real world.

Yeah, thanks. I've had several tabs open in my browser for a week trying to decide what to buy.

[johnrando]

Negotiating a purchase of a TSE3 cat-back exhaust for the ZHP.

oh yeah

[Hermes]

you don't want the official sunshade, it doesn't fit quite right

http://i29.photobucket.com/albums/c288/jhermes/eae139da.jpg

hell, it fits the E38 better so it's in that car now


+1. Needs an additional 3" on top for a Sedan. The Coupe might have a different rake on the windshield. Might need more than 3". Trying to figure out how to supplement the missing gap. If not, looking for another shade from a different model code that would fit an E46.


That is crazy. They advertise it as FOR the E46 and that fitment looks horrible. Ugh and I just ordered the sunshade a few days ago. I am glad I am getting 3M crystalline tint on my car in the next week or so. Its pricey, but with that and the sunshade my interior should last a long time even when parked outdoors.

edit: and yet it looks like it fits ok in the "official" picture from BMW: http://www.trademotion.com/sfimages/214336/partImages/4462/SFPLImage86712.jpg


Me thinks they used a different shade to make it look like it is form fitting. Anybody here works in a BMW Parts Dept. to do a fitting comparison on heightwise? Will be greatly appreciated.


Never measured it but that looks similar to the gap I have on the coupe.

Sent from the Last Next Best Thing.


Perhaps it's supposed to sit in the slit we have running across our dash?


Little stroke of genius right there.

I just tried it. It fits the height perfectly that way.

Sent from the Last Next Best Thing.


^ no way if the brochure pic is to be believed, that is all the way at the bottom of the window

edit: since Keith posted at the same time I did...

Keith, can you take a pic to see if it looks the same as the pre-facelift pictured? If so, I'm re-positioning it back in the E46


Doesn't sit perfectly flat, but here you go.

http://i1234.photobucket.com/albums/ff401/Kayger12/20130603_204213_zps5663530f.jpg



Sent from the Last Next Best Thing.


That said, if laid flat all the way to the bottom and side to side, then it will be short height wise.


they did some "shady" (hehe) angles with the brochure picture to make the windshield wipers hide the fact that the shade doesn't go all the way down. So it looks like part of our dash is still going to get some sun.


Exactly.

Only options seem to be expose the front of the dash or have that big gap at the top of the windshield.

Sent from the Last Next Best Thing.


https://www.heatshieldstore.com/

I have one of these. It's ugly but it does its job effectively and it fits well. It's a PITA to roll it up every-time when you get into your car but it really helps keep some heat out and it protects your dashboard pretty well.

I would prefer a BMW folding sun shield like the one JP folded but they don't fit too well..


I have a sunshade from Walmart in both the E46 and E38. Fits fine and paid $10 each :dunno


Sent from my iPhone 5.


Was looking at one of those for the CX-5.

Sent from the Last Next Best Thing.


I had one of these in my last car, fit was excellent. The only issue is that after quite a few years, it somehow got air inside and it would puff up when in the windshield for a while... Wouldn't be too hard to put some slits in the sides to prevent it, I just never did. It just made it even more PITA to roll up... Oh well... Still a worthwhile purchase in my eyes. I might do this again if the OEM one doesn't fit too well.


I'd get it. It's a pretty solid product, its worth rolling it up every time, at least you are protecting your interior and keeping some heat out.



Hmm. Mine hasn't puffed up yet.. It is a few years old but it's holding up very well.


I have the springy kind that you bend/fold (from Brookstone) and it fits the windshield OK (but barely). Worth getting if they still have them.


Good deal. Appreciate the info.

Sent from the Last Next Best Thing.

here is the old sunshade discussion from 2011

http://www.zhpmafia.com/forums/showthread.php?4615

[Avetiso]

Negotiating a purchase of a TSE3 cat-back exhaust for the ZHP.

YES.

[Stigissimo]

Phew - this week was a big week for the ZHP. It received a new tri-stitch Coby wheel, tri-stitch boots, and a V1 hardwire with a concealed display located on the left part instrument cluster dash trim. Pretty sure I'll be taking the CDV off this weekend, and I may with some luck decide to grow the cojones to to maybe kinda sorta possibly attempt the instrument cluster V1 concealed display install. That's asking a lot though. Please excuse the scheiße quality of the pictures. I just took them real quick to show y'all.

http://i1360.photobucket.com/albums/r651/NicolasScottAndre/B69CF8F3-4952-4C7D-A589-F02D91CFF1D2-11046-0000107A6FB2B273_zps9365c16c.jpg?t=1370455859

http://i1360.photobucket.com/albums/r651/NicolasScottAndre/9C13FE1A-42F5-4447-90F8-974F53F31893-11046-0000107A774BC22F_zpsc73591cd.jpg?t=1370455876

http://i1360.photobucket.com/albums/r651/NicolasScottAndre/01CF0320-4239-4C9D-8638-1E1375C07B20-11046-0000107A8295AB03_zps64e3af03.jpg?t=1370455881

[jgt_zhp]

Nice work.

Every time I see a picture of that Coby stuff, I get the itch. One of these days

[webster]

RE: Sunshade discussion

I got the BavAuto Ultimate Sunshade. It is pricey, but it is equally awesome. Fits like a glove and keeps the car noticeably cooler when parked in the sun.

[328ioc]

RE: Sunshade discussion

I got the BavAuto Ultimate Sunshade. It is pricey, but it is equally awesome. Fits like a glove and keeps the car noticeably cooler when parked in the sun.

I have this as well.

Sent from my DROID RAZR using Tapatalk 2

[johnrando]

Nice Nic.

[jgt_zhp]

Yeah, thanks. I've had several tabs open in my browser for a week trying to decide what to buy.

LOL. I know that feeling, for sure. Just decided to man up and make some decisions. Invoking the Detailed Image affiliate link, I will soon have at my disposal:

Chemical Guys Maxi Suds Detergent
Meguiars M205
Meguiars M105
Chemical Guys Extreme EZ Creme Glaze
Chemical Guys Jetseal 109
Chemical Guys XXX Hard Core Paste Wax
And the Clay Bar Kit (Clay, container, detail spray) you get free for spending a billion dollars

That should clean her up a bit

[bullfrogs_M3]

LOL. I know that feeling, for sure. Just decided to man up and make some decisions. Invoking the Detailed Image affiliate link, I will soon have at my disposal:

Chemical Guys Maxi Suds Detergent
Meguiars M205
Meguiars M105
Chemical Guys Extreme EZ Creme Glaze
Chemical Guys Jetseal 109
Chemical Guys XXX Hard Core Paste Wax
And the Clay Bar Kit (Clay, container, detail spray) you get free for spending a billion dollars

That should clean her up a bit

+100 for EZ Creme and Jetseal. The XXX wax I found to be "meh" (personal opinion based on shine and glassy looking shine on the paint)

[midlandtech]

LOL. I know that feeling, for sure. Just decided to man up and make some decisions. Invoking the Detailed Image affiliate link, I will soon have at my disposal:

Chemical Guys Maxi Suds Detergent
Meguiars M205
Meguiars M105
Chemical Guys Extreme EZ Creme Glaze
Chemical Guys Jetseal 109
Chemical Guys XXX Hard Core Paste Wax
And the Clay Bar Kit (Clay, container, detail spray) you get free for spending a billion dollars

That should clean her up a bit

Sweet when did you say you were you wanting to come over and work on mine? =)

[cakM3]

Got back from my road trip and I had my brother drive my ZHP today. Man does my car look good in the rear view :)

Sent from my DROID RAZR MAXX HD using Tapatalk 2

[Tnhl1989]

Got back from my road trip and I had my brother drive my ZHP today. Man does my car look good in the rear view :)

Sent from my DROID RAZR MAXX HD using Tapatalk 2

I like the rear end better ;)

[jgt_zhp]

Sweet when did you say you were you wanting to come over and work on mine? =)

Uhhh, the 3rd Tuesday of next week, I think I'm free. I'll get back to you right away.

BTW, Tony is getting me hooked up on this coding business. I have a cable ordered, and he shot me a whole folder full of files that scare the crap out of me

[midlandtech]

Uhhh, the 3rd Tuesday of next week, I think I'm free. I'll get back to you right away.

BTW, Tony is getting me hooked up on this coding business. I have a cable ordered, and he shot me a whole folder full of files that scare the crap out of me

Ha. We should get together sometime and see what damage we can do.

[Tnhl1989]

I can do a google hangout and teach both of you guys or anyone that wants to join in. Be sure to get a google plus account first :). My hours are 8pm EST to 12am EST.

[Pip]

I can do a google hangout and teach both of you guys or anyone that wants to join in. Be sure to get a google plus account first :). My hours are 8pm EST to 12am EST.

Count me in! I'll PM you my email address. Can't confirm those hours work most days due to work but I'll sure try.

[jgt_zhp]

I can do a google hangout and teach both of you guys or anyone that wants to join in. Be sure to get a google plus account first :). My hours are 8pm EST to 12am EST.

Awesome, thanks for the offer, Tony. I don't have my cable yet, and I'm starting a new job next week, so I'm not sure what my schedule is going to be like yet. When things get a little more figured out, I'll hit you up, and get Steve's availability, and we'll set something up.

[SoCalZman]

It has arrived. Only for those rare times when I must parallel park. http://img.tapatalk.com/d/13/06/06/je2yqyje.jpg

[midlandtech]

Awesome, thanks for the offer, Tony. I don't have my cable yet, and I'm starting a new job next week, so I'm not sure what my schedule is going to be like yet. When things get a little more figured out, I'll hit you up, and get Steve's availability, and we'll set something up.

Sounds good I usually have patients until 5-530 I'm sure I can find time... I will set up a Google account.

Sent from my Nexus 10 using Tapatalk 2

[JupiterBMW]

Today I sent my LCM up to BP so he can code the triple blink features for me. :) Yay!

[Tnhl1989]

Today I sent my LCM up to BP so he can code the triple blink features for me. :) Yay!

When BP sends it back maybe he can ship the other package to me too :)

[Tnhl1989]

Today I sent my LCM up to BP so he can code the triple blink features for me. :) Yay!

When BP sends it back maybe he can ship the other package to me too :)

[Johal E32]

It has arrived. Only for those rare times when I must parallel park. http://img.tapatalk.com/d/13/06/06/je2yqyje.jpg

Nice! My friend who also lives in SF has one of these things for his BMW.

[fredo]

I ordered vanity plates for my 2005 Mini Cooper yesterday. I went with "05 MIN"
The price was $225 for a 5 year term. "05 MINI" was available, but the price was double.

http://i1300.photobucket.com/albums/ag89/av1968/05min_zps38e89338.png

[gr330zhp]

New windshield cowl on the 740i today

Before:
8901
8902

After:
8903
8904


Sent from my iPhone 5.

[SoCalZman]

Nice. I was just looking at my cowl last weekend thinking it was something that I should put on my list. It looks like I could change it in 10-15 minutes, yeah?

[1 M Mike]

I ordered vanity plates for my 2005 Mini Cooper yesterday. I went with "05 MIN"
The price was $225 for a 5 year term. "05 MINI" was available, but the price was double.

http://i1300.photobucket.com/albums/ag89/av1968/05min_zps38e89338.png
Double? Just because of one additional character? :scratchinghead

[SoCalZman]

Nice! My friend who also lives in SF has one of these things for his BMW.

Has it protected his bumper??? How does he like it? :)

There was a card in the box for a few more products, such as this one to protect the corners of the bumper where a bumper bully does not reach. It appears to be much more subtle than other solutions I have seen. I might order a color sample and see how it matches up. check it out:

http://www.bumperdefender.com/

[fredo]

Double? Just because of one additional character? :scratchinghead

Correct. I selected the "custom series " which is limited to 2 numbers + 3 characters. If you want another character, that's the "luxury series" which is more expensive.

[gr330zhp]

Nice. I was just looking at my cowl last weekend thinking it was something that I should put on my list. It looks like I could change it in 10-15 minutes, yeah?

Took about half hour on the E38. Hardest part was pulling the arm off after unbolting it. Still wasn't too difficult. Pretty sure both arms must be removed on the E46.


Sent from my iPhone 5.

[das boots]

RE: Sunshade discussion

I got the BavAuto Ultimate Sunshade. It is pricey, but it is equally awesome. Fits like a glove and keeps the car noticeably cooler when parked in the sun.

Pics?

[das boots]

Finally got my 6LED license plate bulbs in.

First pic is the old 3LED bulbs and second pic is 6LEDs.

NOTE: Driver side bulb in first picture was aimed incorrectly causing it to appear darker than the other side.

8872

8873
Sent from my DROID RAZR using Tapatalk 2

Thanks. Personally, I'd take the 3 LED. I had the 6 LED presently and they were way too bright that they looked like aircraft warning lights. I had to turn them around. Does 6 LED burn out faster? I just placed an order for the 3 LED. Less of a beacon light.

[jgt_zhp]

Correct. I selected the "custom series " which is limited to 2 numbers + 3 characters. If you want another character, that's the "luxury series" which is more expensive.

My daughter moved to Texas last year. I was dumbfounded at all the different combinations and options available for license plates. Totally crazy.

[niart906]

Ordered new front struts and a new steering Guibo this morning. Late next week it'll be in the shop for an alignment and to mount and balance four new tires. Assuming FedEx finds my fourth tire.

Goddamn FedEx, you had one job...

[midlandtech]

Goddamn FedEx, you had one job...

Haha I laughed at this

[jgt_zhp]

Got a call from my indy shop today. My wheels came back from the refinisher. Said they "weren't right", color wasn't dark as I asked for, and there were some paint issues. Sent them back for another try.

Nice to know they've got my back, but I'd sure like to get them back already. This has been in the works for quite a while.

Alos got lined up to get my windows retinted tomorrow. That'll be nice. Imola car seems considerably more prone than the Alpine White to heat up inside when left in the sun.

[SoCalZman]

Got a call from my indy shop today. My wheels came back from the refinisher. Said they "weren't right", color wasn't dark as I asked for, and there were some paint issues. Sent them back for another try.

Nice to know they've got my back, but I'd sure like to get them back already. This has been in the works for quite a while.

Alos got lined up to get my windows retinted tomorrow. That'll be nice. Imola car seems considerably more prone than the Alpine White to heat up inside when left in the sun.

What tint are you going for? I am hopefully getting this done in the next week or two: http://solutions.3m.com/wps/portal/3M/en_US/Window_Film/Solutions/Markets-Products/Automotive/Crystalline_Automotive_Films/

[jgt_zhp]

What tint are you going for? I am hopefully getting this done in the next week or two: http://solutions.3m.com/wps/portal/3M/en_US/Window_Film/Solutions/Markets-Products/Automotive/Crystalline_Automotive_Films/

It's a ceramic, either 36 or 38% transmittance, I can't recall exactly. Has great heat rejection, which was more what I was after. The 20% my car had on it was just way too dark for me. And the rear and sides were 2004 vintage, and had taken on that awesome purplish hue. It really needed to come off.

[Johal E32]

Has it protected his bumper??? How does he like it? :)

There was a card in the box for a few more products, such as this one to protect the corners of the bumper where a bumper bully does not reach. It appears to be much more subtle than other solutions I have seen. I might order a color sample and see how it matches up. check it out:

http://www.bumperdefender.com/

He likes it. It's kept his bumper in good shape, although he has it on his garage queen E91 M3 clone so it doesn't get parked on the streets too often. Seems like I would forget to put over my bumper every time I park :rofl

[1 M Mike]

:jawdrop


That color is incredible


+1 million


beautiful


wow. I want one of those


@ 1 M Mike

:drool :drool :drool :drool

awesome job detailing her :thumbsup


She looks great. The paint looks dripping wet.

And we want more pictures, anytime, anywhere, dirty, or clean. Period.


Holy cow Mike your 1M just made my heart race faster.
Belated thanks for the kind and extremely generous comments from my familia Mafia. :)

You can tell you're getting older when it takes you longer to recover from a full days worth of detail. Back in the old days I'd be right back at it within a day or two doing another car. Now it's more like a week or two. Which means the little frau's Touring is next in line starting this weekend. :headbang

I just added a keyhole cover from Ind. Like a bonehead I didn't put a towel down under the door, and naturally dropped it on the cement while trying to fit the new piece back into the hole. :facepalm

So it's a bit scuffed on the outside edge, but it's only fairly noticeable when looking at it from the 3/4 angle.

I think it's an ok addition, but frankly I'm not sure how long I'll stick with it. Sometimes I can be like a female constantly changing their mind like trying to figure out what hairstyle looks best. :)

[danewilson77]

#becauseracecar

[Dave_B]

THUD!

[JupiterBMW]

My goodness I wish I could fit the real ZCP wheels on my car. Those widths/offsets are so ridiculous looking on such a small car. Car looks awesome man. Nicely done.

[Ryans323i]

I like the clean look of the no-keyhole cover, but my practical side likes the idea of manual entry if there were ever a issue. (Like the GM5 module on the e46)

[midlandtech]

Alos got lined up to get my windows retinted tomorrow. That'll be nice. Imola car seems considerably more prone than the Alpine White to heat up inside when left in the sun.

What shop did you go with?

[jgt_zhp]

What shop did you go with?

Midwest. I stopped by there and talked to them. They seem to know there shite, and the guy went all ga ga over my car, so that's genius marketing on his part.
Thanks for the suggestion.

[niart906]

Got some goodies from FCP this morning. New Sachs front struts and a new steering guibo.

http://i864.photobucket.com/albums/ab207/niart906/null-29.jpg

http://i864.photobucket.com/albums/ab207/niart906/null-28.jpg

[SoCalZman]

let us know what kind of difference the new guibo makes. my steering feels pretty tight still but I have no reference.

[webster]

i washed the car yesterday to get rid of a bunch of water spots, and of course a few hours later a storm came in while i was at dinner with family. spots returned. grr!

[JupiterBMW]

Haven't done much for my car lately, but I did take her out today. The baby and I went for a drive to the mall. You ever get some days where the car just feels better? Like she's faster than other days? Well, today was one of those days. So, I let her stretch her legs a little... :)

[Newjack]

let us know what kind of difference the new guibo makes. my steering feels pretty tight still but I have no reference.

Dane recently did his. He can chime in with results.

Sent from my Nexus 4 using Tapatalk 2

[johnrando]

Updated my project thread: (splitters, trunk lip spoiler, rebadge)

http://www.zhpmafia.com/forums/showthread.php?4241-Jet-Black-ZHP-quot-Mini-quot-Mod-A-Palooza&p=274187#post274187

[midlandtech]

Midwest. I stopped by there and talked to them. They seem to know there shite, and the guy went all ga ga over my car, so that's genius marketing on his part.
Thanks for the suggestion.

Anytime... The guy did the same when I brought mine in

[jgt_zhp]

Anytime... The guy did the same when I brought mine in

Damn it!! I knew he was playing me. Hook, line and sinker, just like some rube from Kansas.




Hey, wait....

[midlandtech]

Damn it!! I knew he was playing me. Hook, line and sinker, just like some rube from Kansas.




Hey, wait....

Haha well if it makes you feel better he didn't do that when I brought in my truck

Sent from my Nexus 10 using Tapatalk 2

[jgt_zhp]

You know, it kind of does ;)

Have you seen their carbon fiber wrapped Tundra?

[midlandtech]

Yup... I live by the golf course over there so I've seen all the one off stuff the do from time to time.

Sent from my Nexus 10 using Tapatalk 2

[Ryans323i]

Haven't done much for my car lately, but I did take her out today. The baby and I went for a drive to the mall. You ever get some days where the car just feels better? Like she's faster than other days? Well, today was one of those days. So, I let her stretch her legs a little... :)

With the baby in the car! Gotta give you a hard time.
Love those days when the car feels faster!

Sent from my Nexus 7 using Tapatalk 2

[Sockethead]

We just got two baby seats delivered today from a shower gift... Going to see how they fit in the ZHP....

[JupiterBMW]

With the baby in the car! Gotta give you a hard time.
Its not like I was running track laps or anything! I just wound out 2nd gear a few times... Trust me, when you come down to Florida, you'll see, the roads are all flat, straight, and boring. A1A is like a giant dragstrip. Straight, wide open, flat...


We just got two baby seats delivered today from a shower gift... Going to see how they fit in the ZHP....
They will fit just fine! Our girl actually prefers the ZHP to the X3 because she can see out of the car more. That, or she just knows how awesome natural brown leather is... :rofl

[Sockethead]

Its not like I was running track laps or anything! I just wound out 2nd gear a few times... Trust me, when you come down to Florida, you'll see, the roads are all flat, straight, and boring. A1A is like a giant dragstrip. Straight, wide open, flat...


They will fit just fine! Our girl actually prefers the ZHP to the X3 because she can see out of the car more. That, or she just knows how awesome natural brown leather is... :rofl

Does the ZHP have the "Latch system" for the baby seats? also, do you put something under the frame to protect the leather? They have the plastic frames that the seat locks into...

This is all new to us :eyetwitch

[JupiterBMW]

Yes, it does have the latch anchors. You'll see them under the little plastic clips in the bottom corners... Lemme know if you need and I can take some photos. And yes, we do have a seat protector underneath, it has some non-skid grippy thing on the underside too. Honestly though, a towel would prolly work just fine. The only benefit is that ours has some pockets that hang down under the car seat for storage... Again, lemme know if you want some photos.

[Sockethead]

Ok thanks :thumbsup

[jringo]

Just wrapped up a 4.5 hour total cooling system and pulley update. Thanks to the DIY on bmw330ci and a 6 pack of Brau Brothers RingNeck ale (shout out to my wife's uncle and cousins that are the masters behind http://braubeer.com)
the job couldn't have gone smoother.

My first DIY with my "new" ZHP. What a fantastic car.

[Imola.ZHP]

Wow, I had a lot to catch up on!

I'm doing an 8-week self prep course for the DAT. This is my 3rd and final time to be able to take it, so its pretty serious. If I don't do well, then I can kiss my dream of being a Dentist (that I realized nearly 9 years ago and have been working very hard towards ever since) goodbye!

As for the ZHP... That radar detector mount that I spoke of about 4 pages back came in. I haven't been able to drive much with it yet (I work 5 minutes from home), it seems very sturdy, but perhaps I have it clamped down too hard? It seems to make the mirror shake some and thats very annoying. I need to find some time to mess with it soon. Here is that pic for reference.

http://maxcdn.nexternal.com/mgt/images/bmw-bbe-74.jpg

I also took the car, with its tinted windshield, through city inspection thinking they wouldn't notice its tinted. Well, they did, and they failed me. I told the guy I have a Dr.'s note for it, but forgot to bring it. He said it should be no problem getting it passed if I come back with a Dr.'s note. Now I need to get to get an eye exam and sweet talk my Optometrist into writing me one. I have two other options, option one, the rumor is that since the city is broke, they are going to squash the city inspection program all together at the end of the month (PRAYING!). Option two is to register my car in the county. I have a few addresses I can use.

[JupiterBMW]

Wow, I had a lot to catch up on!

I'm doing an 8-week self prep course for the DAT. This is my 3rd and final time to be able to take it, so its pretty serious. If I don't do well, then I can kiss my dream of being a Dentist (that I realized nearly 9 years ago and have been working very hard towards ever since) goodbye!

As for the ZHP... That radar detector mount that I spoke of about 4 pages back came in. I haven't been able to drive much with it yet (I work 5 minutes from home), it seems very sturdy, but perhaps I have it clamped down too hard? It seems to make the mirror shake some and thats very annoying. I need to find some time to mess with it soon. Here is that pic for reference.

http://maxcdn.nexternal.com/mgt/images/bmw-bbe-74.jpg

I also took the car, with its tinted windshield, through city inspection thinking they wouldn't notice its tinted. Well, they did, and they failed me. I told the guy I have a Dr.'s note for it, but forgot to bring it. He said it should be no problem getting it passed if I come back with a Dr.'s note. Now I need to get to get an eye exam and sweet talk my Optometrist into writing me one. I have two other options, option one, the rumor is that since the city is broke, they are going to squash the city inspection program all together at the end of the month (PRAYING!). Option two is to register my car in the county. I have a few addresses I can use.

Good luck! Worst case scenario, if you have to pull the tint, have that done and retint it with Llumar Air Blue 80... As soon as I replace my windshield, I'll be doing that. Almost completely clear, but rejects heat and UV like no other!!

[kayger12]

Just wrapped up a 4.5 hour total cooling system and pulley update. Thanks to the DIY on bmw330ci and a 6 pack of Brau Brothers RingNeck ale (shout out to my wife's uncle and cousins that are the masters behind http://braubeer.com)
the job couldn't have gone smoother.

My first DIY with my "new" ZHP. What a fantastic car.

Nice work.

Looks like some good beer as well. :cheers

Sent from the last Next Best Thing via Tt4beta

[zhpnsnv]

I'm going to attempt to install my performance rear diffusor later. First, I have many hours ahead of me in the office. Boo.

[jgt_zhp]

Bavarian Autosport Ultimate Sun Shade. Fits like it was custom tailored

8944

[niart906]

Did my steering Guibo this morning, and wow! What a difference! I had a good amount of steering play before this, and the new Guibo completely eliminated all of the play. My car now drives like an M3 should...

http://i864.photobucket.com/albums/ab207/niart906/null-30.jpg

[SoCalZman]

Good luck! Worst case scenario, if you have to pull the tint, have that done and retint it with Llumar Air Blue 80... As soon as I replace my windshield, I'll be doing that. Almost completely clear, but rejects heat and UV like no other!!

Great minds....On thursday I am getting all my windows (including windshield) tinted with 3M Crystalline tint 90. Similar properties. Clear but rejects UV and heat. What's wrong with your windshield?

[danewilson77]

Bavarian Autosport Ultimate Sun Shade. Fits like it was custom tailored

8944


Did my steering Guibo this morning, and wow! What a difference! I had a good amount of steering play before this, and the new Guibo completely eliminated all of the play. My car now drives like an M3 should...

http://i864.photobucket.com/albums/ab207/niart906/null-30.jpg

Great find and great work. Did my guibo about a month ago and can confirm your report.

[Johal E32]

Hey guys.

So i am in the process of buying a used ZHP front bumper (OEM). But it does not include fogs, the lower mesh grille, or trim. The trim and lower mesh grille is no problem. I have some extra trim at home. I'll get a new grille from a dealer.

But the fogs, I figure since they probably get damaged from rock chips and pitting etc.. Why should I pay an arm and a leg for OEM ones if they will need to be changed every other year to look nice..

So, any thoughts/opinions on these fogs?

http://www.ebay.com/itm/01-06-BMW-E46-M3-OEM-Mtech-Fog-Lights-Set-Glass-Lens-/380346785425?pt=Motors_Car_Truck_Parts_Accessories&hash=item588e6f5e91&vxp=mtr

[JupiterBMW]

Great minds....On thursday I am getting all my windows (including windshield) tinted with 3M Crystalline tint 90. Similar properties. Clear but rejects UV and heat. What's wrong with your windshield?

I would look into Llumar and more specifically, their FormulaOne line... Its insanely good, and you don't pay as muchf having a 3M branded product... But either way, good luck, having the tint will be awesome. As for my windshield, has a small chip in it, but eventually I want to get it replaced with one that has the rain sensor already incorporated. :thumbsup

[danewilson77]

Hey guys.

So i am in the process of buying a used ZHP front bumper (OEM). But it does not include fogs, the lower mesh grille, or trim. The trim and lower mesh grille is no problem. I have some extra trim at home. I'll get a new grille from a dealer.

But the fogs, I figure since they probably get damaged from rock chips and pitting etc.. Why should I pay an arm and a leg for OEM ones if they will need to be changed every other year to look nice..

So, any thoughts/opinions on these fogs?

http://www.ebay.com/itm/01-06-BMW-E46-M3-OEM-Mtech-Fog-Lights-Set-Glass-Lens-/380346785425?pt=Motors_Car_Truck_Parts_Accessories&hash=item588e6f5e91&vxp=mtr

Yep. Go for it. Reminder that eBay is an affiliate if you do go that route.

http://www.ebay.com/itm/01-06-BMW-E46-M3-OEM-Mtech-Fog-Lights-Set-Glass-Lens-/380346785425?pt=Motors_Car_Truck_Parts_Accessories&hash=item588e6f5e91&vxp=mtr

[zhpnsnv]

The problem:
Stupid tips stick out too far -
http://i10.photobucket.com/albums/a107/mbcoops/0eef7963bffc4159c999495bc9914b2e.jpg

The solution:
BMW Performance Carbon Fiber Diffusor, delivered last night -
http://i10.photobucket.com/albums/a107/mbcoops/null_zpse436f3f7.jpg

Before:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsb4c2b30f.jpg

During:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsfb46180b.jpg

After:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsbbf2f103.jpg
http://i10.photobucket.com/albums/a107/mbcoops/null_zps92f4a61c.jpg
http://i10.photobucket.com/albums/a107/mbcoops/null_zps1822b1c4.jpg

So much better! Tips nice and snug in their home!

[das boots]

Bavarian Autosport Ultimate Sun Shade. Fits like it was custom tailored

8944

That's the one.....unfortunately, I still have the BMW shade.

[danewilson77]

Looks perfect now Marc.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[Johal E32]

The problem:
Stupid tips stick out too far -
http://i10.photobucket.com/albums/a107/mbcoops/0eef7963bffc4159c999495bc9914b2e.jpg

The solution:
BMW Performance Carbon Fiber Diffusor, delivered last night -
http://i10.photobucket.com/albums/a107/mbcoops/null_zpse436f3f7.jpg

Before:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsb4c2b30f.jpg

During:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsfb46180b.jpg

After:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsbbf2f103.jpg
http://i10.photobucket.com/albums/a107/mbcoops/null_zps92f4a61c.jpg
http://i10.photobucket.com/albums/a107/mbcoops/null_zps1822b1c4.jpg

So much better! Tips nice and snug in their home!

Looks great!

[Johal E32]

Yep. Go for it. Reminder that eBay is an affiliate if you do go that route.

http://www.ebay.com/itm/01-06-BMW-E46-M3-OEM-Mtech-Fog-Lights-Set-Glass-Lens-/380346785425?pt=Motors_Car_Truck_Parts_Accessories&hash=item588e6f5e91&vxp=mtr

Got it. Ill use the affiliate link!

[niart906]

So jelly, I've always had a soft spot for the 1-series, and yours is perfection. Nicely done!

[zhpnsnv]

Looks perfect now Marc.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

Thanks! Now I will debate getting the CF trunk spoiler.


Looks great!

Thanks!


So jelly, I've always had a soft spot for the 1-series, and yours is perfection. Nicely done!

Thanks! I think everyone who has 1ers also has a soft spot or a desire to own an E46 M; I know I do!

[kayger12]

Nice job, Marc. Looks like she sounds.

Sent from the last Next Best Thing via Tt4beta

[danewilson77]

Thanks! Now I will debate getting the CF trunk spoiler.



Thanks!



Thanks! I think everyone who has 1ers also has a soft spot or a desire to own an E46 M; I know I do!

No debating Sir.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[zhpnsnv]

You're right. Just a matter of time.

[danewilson77]

You're right. Just a matter of time.

:)

Great decision.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

[M0nk3y]

Decided to be productive and clean the 3" of pollen and dust off the cars.

8949


Sent from my iPhone using Tapatalk

[1 M Mike]

The problem:
Stupid tips stick out too far -
http://i10.photobucket.com/albums/a107/mbcoops/0eef7963bffc4159c999495bc9914b2e.jpg

The solution:
BMW Performance Carbon Fiber Diffusor, delivered last night -
http://i10.photobucket.com/albums/a107/mbcoops/null_zpse436f3f7.jpg

Before:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsb4c2b30f.jpg

During:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsfb46180b.jpg

After:
http://i10.photobucket.com/albums/a107/mbcoops/null_zpsbbf2f103.jpg
http://i10.photobucket.com/albums/a107/mbcoops/null_zps92f4a61c.jpg
http://i10.photobucket.com/albums/a107/mbcoops/null_zps1822b1c4.jpg

So much better! Tips nice and snug in their home!
Oh yeah....................rock me Amadeus!

Looks sweet!

Should have come that way from the factory (or port added) along with front shadowline grills and also carbon fiber rear BMW Performance spoiler.

[M0nk3y]

Looks perfect now Marc.

HTC DNA ON TT4 BETA, WILLIAMSBURG, VA

Agreed. I love that look.

Those tips really make me want a PE Exhaust

[zhpnsnv]

Oh yeah....................rock me Amadeus!

Looks sweet!

Should have come that way from the factory (or port added) along with front shadowline grills and also carbon fiber rear BMW Performance spoiler.

Thanks, and I agree. It can't be a coincidence that the perf. diffuser perfectly fits the perf. exhaust, yet it looks ridiculous without it. For now I like it without the spoiler as it's very understated, but the spoiler itself isn't over the top, either.


Agreed. I love that look.

Those tips really make me want a PE Exhaust

Well then you're one listen away from buying it! Don't listen to it!!!!