Rear diffuser

[midlandtech]

Has anyone found a rear diffuser that is different than stock but still fits in the rear bumper? I am replacing my OEM one and was wondering what options were out there

Nexus 7.... deal with it

[Hornung418]

CF, Quad setup for M3 exhaust, and maybe a paint matched option.

[UdubBadger]

the CF one bimmian sells looks :drool

[johnrando]

I got a c/f one from eurospec - found them on e46f.c

[cakM3]

You can always prep your OE diffuser and CF wrap it :)

[Junior2552]

+1. Why don't you just refinish it? Do you want a physically different diffuser? Or just a newer-looking one?

[midlandtech]

I kinda want a different looking one I'm not opposed to the stock one in cf but I have seen some sweet looking ones for M3's and was hoping that either they fit our cars or there are ones in that style for our cars


~Steve
Sent from my iPhone using Tapatalk

[UdubBadger]

I have personally only seen the MtechII ones in CF. However, I don't go looking for odd and overpriced pieces made by ACS or Hamann

[Hornung418]

http://www.insideperformance.de/onlineshop/product_info.php/cpath/1_9/products_id/111

[UdubBadger]

Looks good if u have quads


- Goin' H.A.M. Mobile

[cakM3]

Yeah Justin, I saw this link and even contemplated going this route....I thought this would look awesome but then realized that I would have to do some modification to my exhaust as well....still, it looks awesome! :thumbsup

[Hornung418]

http://forum.e46fanatics.com/showthread.php?t=665561

Yeah If you have a muffler delete, which I think Steve does...this would look bad ass.

[cakM3]

I totally agree Justin :thumbsup

[midlandtech]

May have to look around to see if I can find a lower price on it but that is what I am after.... Nothing radical but something that sets it apart a bit


~Steve
Sent from my iPhone using Tapatalk

[UdubBadger]

you could probably get an eisenmann muffler for the e46M3 to work on it with some custom piping done between the resonator and muffler

[midlandtech]

Acquired... Now I wait and think of what I should do with the exhaust


~Steve
Sent from my iPhone using Tapatalk

[Hornung418]

Wait...you bought the cf quad diffuser?

This post brought to you by Uncle Clark's Anti-gravity Cream. Put some on your Super Collider just before the Big Bang.

[midlandtech]

Ya got a quad diffuser for mtech 2 bumper hoping to get it, fuel filter, shocks and struts and tires done in the next week or week and a half then on to figure out how I want to deal with the burnt bowls


~Steve
Sent from my iPhone using Tapatalk

[cakM3]

Steve,

You can also get the custom center quad exhaust to fit your new diffuser here :thumbsup

http://www.insideperformance.de/onlineshop/product_info.php/cPath/1_28/products_id/109 (http://www.insideperformance.de/onlineshop/product_info.php/cPath/1_28/products_id/109)

[webster]

found this diffuser:

http://www.insideperformance.de/onlineshop/product_info.php/cPath/1_9/products_id/176

says it fits Mtech2 rear bumper. would go nicely with that exhaust.

[midlandtech]

found this diffuser:

http://www.insideperformance.de/onlineshop/product_info.php/cPath/1_9/products_id/176

says it fits Mtech2 rear bumper. would go nicely with that exhaust.

That's the one I went with just need to figure out what I want to do with the exhaust now


~Steve
Sent from my iPhone using Tapatalk

[Hornung418]

Awesome, Steve! Can't wait to see the finished product.

This post brought to you by Uncle Clark's Anti-gravity Cream. Put some on your Super Collider just before the Big Bang.

[UdubBadger]

That's the one I went with just need to figure out what I want to do with the exhaust now


~Steve
Sent from my iPhone using Tapatalk

Y pipe it and do a custom application

[Junior2552]

Can I have your stock diffuser? Somebody smashed mine this morning....

[midlandtech]

ya... you will have to dremel the exhaust opening a bit to get it back to stock looking.... I have 3" tips on my exhaust and while tracking the car they got super hot and worked their way into the stock opening a bit. if you want it though its yours just pay shipping. I will let you know when the new one gets here

[Junior2552]

Thanks man! That's a big help. I'm getting a newer exhaust soon anyway, and I'm sure it could use the clearance. Let me know what's up, I really appreciate it!

[jayjay_dee]

Steve, any update on this?

Anyway, just want to share this with you guys who are contemplating about quad exhaust setup...

http://forum.e46fanatics.com/showpost.php?p=14603297&postcount=60

[midlandtech]

The one I received was messed up in shipping so returned it, stock one split when removing it (guess it was brittle) ended up finding a second hand one off eBay and modified it to fit the larger diameter exhaust I had fitted I'm happy with it although its not as unique as I initially set out for... May do something else in the future but this works for now


~Steve
Sent from my iPhone using Tapatalk

[328ioc]

Steve, any update on this?

Anyway, just want to share this with you guys who are contemplating about quad exhaust setup...

http://forum.e46fanatics.com/showpost.php?p=14603297&postcount=60

Damn that looks kinda sexy......

[cakM3]

jayjay, I like that setup as well :thumbsup