Fender Rolling tool for borrow to ZHPMafia members doityourself

[danewilson77]

This is the fender roller. It is for borrowing. Please keep tool in good shape and keep it in the original box. The tool is virtually brand new, having only been used a few times at the meet in May, 2012.

Borrowers pay shipping. That's it.

I am asking for a 2 week turnaround on the tool, from my doorstep-to you-back to me. Please try to stay within this time slot, to keep the tool available for others.

I will update this thread when I get a shipping quote. The tool should be insured for $250.00 when shipping.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/fenderlip.jpg

http://www.tirerack.com/accessories/detail.jsp?ID=52

Please sign up below. This has been cleared with the Boss.

Additionally, I want to thank all of the members that pitched in for the tool. Your selflessness is appreciated by all.

~DW

[danewilson77]

Name

1. Bullfrogs ///M3 - I am putting this guy first as he had contacted me previous to this. If he doesn't roger up...person in the "2" slot will get it first.

[Jesse M]

Is this available to anyone or just people that participated in the purchase?

[danewilson77]

Is this available to anyone or just people that participated in the purchase?

The intention, I believe, from the onset, is that this would be a Mafia Family tool. Not just a tool for those that contributed.

If I could get confirmation on this, from some of the members that donated, that would be great.

Sent from Williamsburg, VA USA

[nike001]

Dane, will you be at Cody's prior to bimmerfest? And if you are, will you be bringing this?

[danewilson77]

I am on the list and am planning to go. I will def bring tool.

Sent from Williamsburg, VA USA

[nike001]

Thank you kindly

[Jesse M]

The intention, I believe, from the onset, is that this would be a Mafia Family tool. Not just a tool for those that contributed.

If I could get confirmation on this, from some of the members that donated, that would be great.

Sent from Williamsburg, VA USA

Okay, Thanks. Even if there was a little fee, I am interested in using it. I can't condone myself into spending upwards of $200 for a single use.

[danewilson77]

Okay, Thanks. Even if there was a little fee, I am interested in using it. I can't condone myself into spending upwards of $200 for a single use.

No fee. You would just be responsible for the shipping both ways.

Still owe a quote on that.

Sent from Williamsburg, VA USA

[Go Horns!]

This is very cool. Kudos to those that took the initiative on this.

[danewilson77]

Bump. Tool is back.

Sent from Williamsburg, VA USA

[echo46]

Do I need to roll my fenders if I am just running the stock wheels. Does the wheel roll give a mote bad ass look?

[Crickett]

Do I need to roll my fenders if I am just running the stock wheels. Does the wheel roll give a mote bad ass look?

Negative; rolling the inner lip of the fender is only useful if you're lowered and/or running wider wheels. There'd be zero visual indication from the outside if you rolled a 100% stock setup.

[Smilez]

can you trust me borrowing it dane :shifty

thats awesome dane. i may need to borrow sometime within two months :D

[danewilson77]

can you trust me borrowing it dane :shifty

thats awesome dane. i may need to borrow sometime within two months :D

Yep. Sounds good.

Sent from Williamsburg, VA USA

[sketchyd]

May be interested in this. My new tires require a little extra space :sly:

Tapped on a talk device

[UdubBadger]

Yeah D, I'm gonna have you send it out this way soon for the Chicago boys to use.


My master plan is to get Kokesh on a set of 19x10 BBS FI's

[redwagon]

wow, nice tool, back when I was in high school, we used old baseball bats..........!
Tim

[yura]

Very cool borrowing setup!

[johnrando]

Dane told me it takes about $37 to ship, then the same back. So, I'm going to have to rent a tool locally and share with William and Gary when he visits. That cost is $50.

[UdubBadger]

:(

why not just wait till it makes its way out there? if it gets to me, thats 1/2 way there, should be less to get it to ya.

[wsmeyer]

Dane told me it takes about $37 to ship, then the same back. So, I'm going to have to rent a tool locally and share with William and Gary when he visits. That cost is $50.

This is why I was thinking for $170 we could have one on the Best Coast

[johnrando]

I hear ya, but that's a bit of dough for a one time use, especially if we all use it in the same session and only pay $20-ish. We can talk offline if you want to buy one.

[ryankokesh]

Yeah D, I'm gonna have you send it out this way soon for the Chicago boys to use.


My master plan is to get Kokesh on a set of 19x10 BBS FI's

I wish...


Sent from my iPhone using Tapatalk

[sketchyd]

is this available? i drove through boston last week, and oof. i needs to roll them fenders.

[danewilson77]

Yep.

[UdubBadger]

Lmk when we can get in Chicago for a few days


- Going HAM mobile

[TomTomTuning]

A couple of the guys told me about the fender roller at the show... I wish I would have known ahead of time so I could have asked you to bring it along but oh well. ;)

I'll like to borrow the roller!
My zip code is 17011

Also, if there's anyone in the Central PA or MD area that would be willing to help out with rolling my rear fenders, let me know. I can drive where ever...

[danewilson77]

A couple of the guys told me about the fender roller at the show... I wish I would have known ahead of time so I could have asked you to bring it along but oh well. ;)

I'll like to borrow the roller!
My zip code is 17011

Also, if there's anyone in the Central PA or MD area that would be willing to help out with rolling my rear fenders, let me know. I can drive where ever...

I could ship to Bruce and he could help you when he gets time :dunno

HTC DNA, Williamsburg, VA

[BCS_ZHP]

Yeah I have a heat gun too, another requirement to protect the paint as the roller stretches your metal. I'm in N.VA, Fairfax Station, probably 2.5 hrs from Harrisburg.

[johnrando]

Or a blow dryer, that works too.

[TomTomTuning]

Awesome, I think I can manage it. I have a heat guns. I'll watch some tutorials, lol

Do I need to remove any liners or moldings from the wheel well?

[Johnmadd]

Awesome, I think I can manage it. I have a heat guns. I'll watch some tutorials, lol

Do I need to remove any liners or moldings from the wheel well?

You can do this. Only thing other then heating up the paint prior to rolling is get a pick or small screwdriver and scrape the grime out of the inner crevis of the fender.

[ELCID86]

Tom, did you ever do this? If not, perhaps we could plan something around the Christmas Holidays in the No. VA/MD area.

[Vas]

I would be up for meeting as well for a fender rolling party.

[danewilson77]

If someone wants to grab the roller while I'm home over Thanksgiving. So be it.

It's the Families roller.

I will be home Nov 27th through Dec 4th.

Sent from my S4 > Mason, OH

[ELCID86]

I may run down there and get it (unless you want to host a rolling party!)

[danewilson77]

I may run down there and get it (unless you want to host a rolling party!)

At a minimum you can snag it.

Sent from my S4 > Mason, OH

[danewilson77]

Bump. Taliben, have you sent this out yet?

The friendliest forum on the planet!

[Vas]

Shawn, do you plan on rolling fenders anytime before you get new wheels ?

[ELCID86]

Shawn, do you plan on rolling fenders anytime before you get new wheels ?

I wouldn't mind even if I don't need it in the near term. Thinking about getting together to do this? Dan and a few others here might also be interested.


Thumbs, iPhone, Tapatalk.

[Vas]

Yeah that would be great

[Taliben]

Bump. Taliben, have you sent this out yet?

The friendliest forum on the planet!

No I still got it with me, waiting on the next address and what not.

[danewilson77]

Ok. Thanks

The friendliest forum on the planet.

[danewilson77]

Taliben,

Please ship the tool back to me per the initial post.

Thanks

[Taliben]

Taliben,

Please ship the tool back to me per the initial post.

Thanks
Alright boss, it'll be in the mail tomorrow

[danewilson77]

Thank you.

The friendliest forum on the planet!

[Vas]

I would love to get my hands on this. :applause

[ELCID86]

We need to set up a drive and roll event in a month or so!


Thumbs, iPhone, Tapatalk.

[NoVAphotog]

We need to set up a drive and roll event in a month or so!


Thumbs, iPhone, Tapatalk.
+1

[danewilson77]

I'll send it to whoever needs it. Let me know.

The friendliest forum on the planet!

[Vas]

Is the tool available for use?

[danewilson77]

Is the tool available for use?

Why yes......yes it is.

[slater]

cool, i should do this for my rear fenders. sometime between now and spring. :)

peter

[ELCID86]

Or wait until the reunion and get in line!


Thumbs, iPhone, Tapatalk.

[slater]

haha. i won't be able to make it (waaaay too much on the plate for it), maybe someday.

peter

[94jedi]

Is the tool available? I'd like to eventually run some small spacers and figured fender rolling might be needed.

[danewilson77]

Yes. It's available.

"No flamesuit required"

[Ssparrow]

Any way I could borrow this tool? Noticed my rear tires are rubbing on the fender today after i filled the tank with gas

[slater]

i need to borrow it as well!

peter

[danewilson77]

Any way I could borrow this tool? Noticed my rear tires are rubbing on the fender today after i filled the tank with gas



i need to borrow it as well!

peter

Yes...

"No flamesuit required"

[ELCID86]

Will it be "home" for the reunion??

[Ssparrow]

Okay cool! I'm going to see if I can borrow one locally first but if not I'll let you guys know!

[danewilson77]

Will it be "home" for the reunion??

Yep.

The friendliest forum on the planet.

[ELCID86]

Yep.

The friendliest forum on the planet.

Perfect.


Thumbs, iPhone, Tapatalk.

[Vas]

Will this be at the reunion?

[ELCID86]

Yep.

The friendliest forum on the planet.




Thumbs, iPhone, Tapatalk.

[danewilson77]

Thumbs, iPhone, Tapatalk.
Lmao

[ELCID86]

;-)


Thumbs, iPhone, Tapatalk.

[zhp05jb]

Is the tool available to borrow? Also, is rolling fender something that an average home mechanic can do w/o too much chance of messing things up (e.g., for someone who knows enough to do basic maintenance, such as brakes, gaskets, etc.)?

Thanks.

[johnrando]

Yes to your 2nd question. Helpful to watch a youtube video of it if you haven't seen it done. It's not complicated per se, but you don't want to screw things up so you need to know what you're doing. After seeing it, it's pretty obvious.

[danewilson77]

Shawn has it. His username is ElCID86?

Sent from my SM-G925V using Tapatalk

[zhp05jb]

Thanks.

[zhp05jb]

Yes to your 2nd question. Helpful to watch a youtube video of it if you haven't seen it done. It's not complicated per se, but you don't want to screw things up so you need to know what you're doing. After seeing it, it's pretty obvious.

Thanks. I'll check out the YouTube.

[Johnmadd]

Yes to your 2nd question. Helpful to watch a youtube video of it if you haven't seen it done. It's not complicated per se, but you don't want to screw things up so you need to know what you're doing. After seeing it, it's pretty obvious.

Perfect response for that question.

[ELCID86]

I do have it. Got your PM and sent you a text. Maybe we can have a NoVA rolling party!


Thumbs, iPhone, TaT.

[WOLFN8TR]

Fender Rolling Instructional Video!



http://www.youtube.com/watch?v=DDTK9IjKIYU

[ELCID86]

Very informative. Thanks Gary!


Thumbs, iPhone, TaT.

[Cadeez]

Dane/Gentlemen,
Is this fine tool still available for loan?? If so, man I could use it! My new wheels/suspension are great when I'm by myself, but get a buddy in the car and it's rub city... Let me know availability, sooner the better, and shipping costs to 97006. Thanks!

Edit: Guess I should've waited a few mins before I sent this... Found a local guy who rents his fender roller on craigslist for $20 for 3 days, haha crazy
http://portland.craigslist.org/mlt/pts/5150419624.html

[ELCID86]

Dane/Gentlemen,
Is this fine tool still available for loan?? If so, man I could use it! My new wheels/suspension are great when I'm by myself, but get a buddy in the car and it's rub city... Let me know availability, sooner the better, and shipping costs to 97006. Thanks!

Edit: Guess I should've waited a few mins before I sent this... Found a local guy who rents his fender roller on craigslist for $20 for 3 days, haha crazy
http://portland.craigslist.org/mlt/pts/5150419624.html

I have it. Joono and I did ours this w/e.
Looks like about $30 to ship so I guess you're better going local. I need (well want) to do my son's car soon.





Thumbs, iPhone, TaT.

[hcbeck2689]

Fender Rolling Instructional Video!



http://www.youtube.com/watch?v=DDTK9IjKIYU

Thanks! I just used this video to DIY. I found that a sledge hammer really did the trick. Now I can run 12" wheels without rubbing!


-Holden

[rkneeshaw]

So my Michelin's rub with 10mm spacers, so I need a very slight fender roll.

is this tool available for me to borrow? I'm located in 49770

[ELCID86]

I currently have it and can get a shipping estimate need to weigh it). I'll let Dane tell you what to do with it when done.

[danewilson77]

I think you're in Michigan. When you receive I've it from Shawn, either hang onto it or ship it back to me. Up to you.

S7 Edge, out

[ELCID86]

Shipping is @$22 via FedEx ground insured for $250.

http://uploads.tapatalk-cdn.com/20160520/cfd690e87a3d697ba0d522a3dd926f0f.jpg

[rkneeshaw]

Thanks guys!

Shawn, I sent you a PM so we can work out details.

I'll use it and then I'll probably just ship it back down you to Dane, looks like you're in Ohio.

[ELCID86]

Thanks guys!

Shawn, I sent you a PM so we can work out details.

I'll use it and then I'll probably just ship it back down you to Dane, looks like you're in Ohio.

Ok. Checking now.

[rkneeshaw]

Thanks Shawn!

[ELCID86]

Thanks Shawn!

Should ship tomorrow. You will get email tracking from FedEx.

[rkneeshaw]

Got it, and it worked great!

http://i1113.photobucket.com/albums/k513/rkneeshaw/2003%20BMW%20330i%20ZHP/1BB12DFA-8ECE-49F5-8BB8-F427B2BF5F04.jpg (http://s1113.photobucket.com/user/rkneeshaw/media/2003%20BMW%20330i%20ZHP/1BB12DFA-8ECE-49F5-8BB8-F427B2BF5F04.jpg.html)

I'll do some more testing this weekend to make sure I've got enough roll in there, and then I can ship it back to you Dane if you like

[Prestovie]

I'd be interested in borrowing the roller if it's available, need some room for spacers in the back. Who has it right now? I'm in 60045

[ELCID86]

I'd be interested in borrowing the roller if it's available, need some room for spacers in the back. Who has it right now? I'm in 60045

Try PMing Ryan (rknee...). Unless he sent it to Dane.

[rkneeshaw]

I've still got it, its sitting in its box waiting for its next assignment :) I just sent you a PM

[rkneeshaw]

Hey Prestovie, you should have received it today according to fedex. Enjoy!

[NoVAphotog]

Hi, a friend of mine and I will need the roller next when it's available. Shipping zip: 22203 Arlington, VA

Thanks!

[ELCID86]

Bump. Where she be?