Can this or will this end the clay bar? - NanoSkin AutoScrub

[DetailersDomain]

NANOSKIN Autoscrub 6 inch Pad - Better and Faster than Claying

http://i46.photobucket.com/albums/f149/pyiu/autoscrub.jpg

Wow is all I can say about this new tool and new technology. I believe this will change the way most pro detailers and DIYers will prep their cars. This is truly a time saver and will pay for itself after a couple detail jobs. We have spent in some cases 1-2 hours claying and prepping a midsize sedan (in rough shape) we recently tested the AutoScrub on an Audi S8 and we were finished in about 15 minutes! You really won't believe this until you try it yourself. The AutoScrub will make you leave your clay bar behind.

NANOSKIN AutoScrub works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.

A dual action orbital polisher is required. AutoScrub will safely and easily removes paint over spray, water spots, tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic.

AutoScrub works great with your favorite detail spray or clay lubricant. Unlike the clay bar, the AutoScrub can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AutoScrub on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.

AutoScrub allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Features
- Lasts up to 4 times longer than clay bars
- Glides on & off easily for a slick finish
- If inadvertently dropped on shop floor, simply rinse clean
- Up to 50-60 uses before you need to replace it

Directions
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Mist sufficient detail spray or clay lubricant onto the surface evenly.
3. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
4. Wipe off residue and move on to compound and polishing or even go straight to your last step.

Important tips:
- Sufficient lubrication is crucial to the AUTOSCRUB application.
- DO NOT use water
- DO NOT use with rotary polisher.

Take a look at the 3 offers we have. Pre Order Pricing is in effect, we should have the first wave by Friday.

http://i46.photobucket.com/albums/f149/pyiu/Nanoskinautoscrubkit.jpg

NanoSkin AutoScrub 3 inch Kit (https://detailersdomain.com/NanoSkin-Autoscrub-3-inch-Pad-Kit_p_696.html)
NanoSkin AutoScrub 6 inch Kit (https://detailersdomain.com/NanoSkin-Autoscrub-6-inch-Pad-Kit_p_697.html)
Nano Skin AutoScrub 6 Inch Pad (https://detailersdomain.com/NanoSkin-Autoscrub-6-inch-Pad_p_695.html)

Various photos of how the pad looks and works

3 inch pad kit
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4189.jpg
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4190.jpg
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4192.jpg

6 inch pad on the Griots on an Uber 5 inch backing plate
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4188.jpg
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4187.jpg
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4186.jpg
http://i46.photobucket.com/albums/f149/pyiu/55oakstnorwood/nanoskin%20autoscrub/DSC_4195.jpg

[danewilson77]

Looks like a great product. Thanks for the info. I will be picking this up.

[nike001]

This will most likely be on my next order as well.

Bookmarked!!

[danewilson77]

Short video here. Could not listen to words at library.


http://www.youtube.com/watch?v=_FpCwU56Yl0&feature=related


http://www.youtube.com/watch?v=AX-JZinb_tY


http://www.youtube.com/watch?v=8xLGdz8w7mc

[DetailersDomain]

those at eurofest next week can take this for a spin.

[M0nk3y]

How much marring is produced with this?

[zhp43867]

Looks like they're claiming none (in the video above), pretty much just like clay bars. "Ideal use yields no marring" (<- typical clay bar claim) etc. so I assume a similar amount to a clay bar.

[kayger12]

Looks order-worthy.

I wish this was sent with a Galaxy S3

[M0nk3y]

Looks like they're claiming none (in the video above), pretty much just like clay bars. "Ideal use yields no marring" (&lt;- typical clay bar claim) etc. so I assume a similar amount to a clay bar.

I'm just wondering because it's a product that you can never need over and get a fresh surface.

It seems like your going to ground alot of particles into the paint...even if you can 'wash' it.

I'm not a fan right now

Sent from my DROID X2 using Tapatalk 2

[zhp43867]

I'm skeptical too, but clay bars also cause marring always, the extent of which depends on how it is used/lubricated/folded over. If nike001 orders it I can take a look (maybe) :)

Edit: So I did a little research. It does seem to have a mesh or web to absorb some contaminants, but when I searched "nanoskin autopia" I got to a thread where one person said it did cause marring on a Mclaren MP4-12C. So I guess we'll see...

[DetailersDomain]

we have about 20 cars on this system now and the marring occurred when the speed on the pc was too fast, speed 1 is ideal, as well marring occurred on paint when you were too heavy on it just like a clay bar. Marring also happened when there was no clay lube.

So yes if you are not aware of all the above it will mar for sure.

If you glide the machine over the panels with a generous amount of clay lube you will be good.

I will try to get some videos up shortly.

[zhp43867]

Could you answer the question I had about the Wolf wheel sealant in the other thread? I feel like I'm PMing a wall.

[DetailersDomain]

best way to get me is via email we are super fast with that, I have never received any updates and my options are set correctly.

sorry about that.

[WOLFN8TR]

Interesting...

[carsontl]

what was the verdict?

[nike001]

those at eurofest next week can take this for a spin.

I didn't see any Detailers Domain tent...?

[DetailersDomain]

we were in the tent with Rogue Engineering

unfortunately there was no demoing due to no electricity.

[carsontl]

bringing this back from the dead, anyone got any comments on the product?

[danewilson77]

bringing this back from the dead, anyone got any comments on the product?

L-O-L

http://www.zhpmafia.com/forums/showthread.php?7366-NanoSkin-Autoscrub-Kit