BMW 330 ZHP Hood and Trunk Roundel Replacement DIY doityourself

[danewilson77]

For hood and trunk roundel replacing.......use an old credit card.......slide said CC between the body and the roundel....then use a small standard screwdriver to pry it up and out. Yes.....the proper tool would be a trim removal tool....but who has that stuff? This is the proper method to remove both hood and trunk. The grommets may stay in the car...or come off with the roundel.


http://www.youtube.com/watch?v=HjMoJxzPUH0

PC 12 and 14....

http://www.realoem.com/bmw/showparts...63&hg=51&fg=20

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/125.png

PC 12...

http://www.ecstuning.com/Search/51141807495/ES205815/

PC 14...

http://www.ecstuning.com/Search/51148209932/ES11479/

That is all I know about roundels.........well....they come in a variety of colors...lol.

[Mtnman]

I used a paint can opener for the final pry....just make sure u keep the plastic card under the back of the prying device! And go slow...

[Marcus-SanDiego]

I've also been known to use a screwdriver wrapped with cotton tshirt.

[danewilson77]

I've also been known to use a screwdriver wrapped with cotton tshirt.

Yup....of MF towel, or tape, or a womans nightie, or....

[Mtnman]

Uh huh. And mrs wilson loves her nighties after u cover them in soot and grease. Sure..... Lol

[danewilson77]

:rofl

[zhp43867]

I never could figure this out before. :shifty

[danewilson77]

I never could figure this out before. :shifty

Wut?