Which wheel well trim part fits the ZHP?

[edlvrt]

The lower, front plastic wheel well liner came off slightly the other day and blew back towards the tire, which ate right through it. Looking on Real OEM, they list two part numbers, one for vehicles with the aerodynamic package and one for cars without. Is the M Tech II considered the aerodynamic package or is that something different?

It is item number 8.

http://realoem.com/bmw/diagrams/a/r/98.png

08 Covering left 1 51718193811 $45.57
08 Covering right 1 51718193812 $45.57

For vehicles with Aerodynamics package
S716A=Yes
08 Covering left 1 51718265467 $45.57
08 Covering right 1 51718265468 $45.57


http://realoem.com/bmw/showparts.do?model=EV53&mospid=47725&btnr=51_3278&hg=51&fg=75

Also, when did Real OEM start with the ability to see a photo of the actual part? That's awesome!

Thanks for the help

[danewilson77]

I always thought MTII=Aerodynamics package.

HTC Thunderbolt+TT

[Ryans323i]

I wonder what the major difference is.

[Crickett]

Yeah, S716A is the MTII kit.


I wonder what the major difference is.
Just the bit that lines up with the bumper; since MTII & the normal bumper are different shapes & all.

[edlvrt]

Awesome guys. Thanks for the prompt responses.

[edlvrt]

Alright, so I got the part and installed it without trouble. I figured I'd check the driver's side to ensure that it is on snug and prevent this from happening over there. Well, the bracket that attaches the lower, inner screw to the inside of the bottom of the bumper is no longer attached to the bumper. I haven't been able to find the part in REAL OEM, but it looks like it was just glued on there originally if it wasn't a part that was molded to the bumper. Any recommendations on a plastic to plastic adhesive? I was thinking 3M 5200. I'll put a picture of the bracket up shortly. Thanks

Ed