1 series fitment on E46?

[Kamal]

Hey all... I've introduced myself in the new members section a couple weeks back. I currently own a 135i with a few mods that I'm going to sell and hopefully replace with a ZHP (baby on the way!).

What I wanted to know is whether my aftermarket BBS LM replica rims (EuroTek Le Mans) will fit properly on a ZHP. I think it will, but just wanted some confirmation.

18x8.5 ET45 wrapped in Michelin Pilot Super Sports 225/40
18x9.5 ET43 wrapped in Michelin Pilot Super Sports 255/35 (offset is actually 48, but a 5mm spacer was included by manufacturer to remedy vibration from improper backspacing)

I get the impression that it should work, but I'm not exactly sure... I've attached a pic of my 1er with the rims for the curious.

[danewilson77]

Yes...they will fit....but you will need spacers to clear the coils with that offset. Mine are 18x8 ET45 and I rub up front without a spacer. 10mm Spacer added.

[Kamal]

so just spacers up front should be fine? I'm worried that the width of the wheels is such that they'll stick out too far from the fender...

[RITmusic2k]

You mixed and matched your tire-wheel combo in that description, right? I'm assuming the 255's are on the 9.5" wheels...

[UdubBadger]

You're good to go with those buddy. Too bad my Arc8's won't fit on mine without some serious work. Rear ET +62. :swiss

[Kamal]

You mixed and matched your tire-wheel combo in that description, right? I'm assuming the 255's are on the 9.5" wheels...

Yup, fixed it now though!