Iron X Results: The Solution for BMW Brake Dust!

[zhp43867]

I use Akebono pads now, so there is little buildup on my refinished Style 135s. I did buy some used Style 68s for my snow tires- WS70s, with terrible, baked on BMW cake. The results speak for themselves.

Iron X is a non-acidic, neutral formula that also does wonders in detailing cars. I'm sure Phil will chime in. Now for the pictures!

These wheels were cleaned with a stiff brush in the before pictures, I'm sure an abrasive pad would do a good job on this same stuff but it is abrasive, Iron X is not. It releases the metal from the wheel! These results translate to the face of wheels as well- with brake dust pitting, sometime more than one application is necessary. This stuff is like Sonax on crack. It is not really an everyday wheel cleaner, it should be used to decontaminate wheels and paint before sealing.

Oh, and it smells like, mmm, rotten eggs and sulfur.

Before- but after a good cleaning with Simple Green and a wheel brush.

http://img560.imageshack.us/img560/7988/image11qz.jpg

http://img11.imageshack.us/img11/5152/image13rp.jpg

After spraying it on. You let it sit for 2-5 minutes, not letting it dry, and watch as it "bleeds" and turn color as it reacts with the iron

http://img443.imageshack.us/img443/4638/imageceyz.jpg

http://img508.imageshack.us/img508/769/image22ap.jpg

Finally you agitate with a mitt- I used a beat up old sheepskin car wash mitt, and rinse. This stuff will rinse off purple, so do it on asphalt or in grass! It won't stain concrete though, you just have to be able to rinse it off.

http://img403.imageshack.us/img403/4081/image10gt.jpg

http://img508.imageshack.us/img508/552/image17yw.jpg

So, whatchu think? :eeps

[M0nk3y]

Stuff is the best on the market now, but don't hold yourself to only using it on the wheels...do your whole car!

Brake dust just doesn't stay on the wheel

Sent using satellite technology

[kayger12]

Impressive. I'll definitely be picking some up.

[Johnmadd]

Wow. Where do I get it? Really, use it on the whole car?

[zhp43867]

Most of the detailing sites carry it. Detailers Domain and Detailed Image both carry it, and they are forum sponsors. You can use it on the whole car, but people only do that when doing a full detail. Basically, at least throw some wax on the car after using this.

I'd do it before claying, then I'd clay the car, use some polish if the car needs it, and seal or wax the car with whatever your choice is. I also bought Tar-X from the same company and will report back once I try it.

Here are some pictures of it working on a 328i M Sport that hadn't been waxed since it was bought new, 2+ years old now. You can't see color change because of the color of the car.

http://img802.imageshack.us/img802/9675/photo1lu.jpg

http://img190.imageshack.us/img190/592/photo2qw.jpg

I will say on the paint I've used it on, and the wheels I've used it on- without brake pitting or heavy visible contamination the finish seems to glow more once it has been done.

[M0nk3y]

Wow. Where do I get it? Really, use it on the whole car?

That's what it's meant for!

Yes, it works on wheels, but it attacks all ferrous metals everywhere. It's an organic material so it's perfectly safe.

This is a car near a railroad. Look what happens:

http://94.100.123.171/1240250001-1240300000/1240276201-1240276300/1240276298_5_sGDT.jpeg

When I did my car, I used 3/4 of a 500ml bottle. Be ready to use alot.

[Johnmadd]

That's what it's meant for!

Yes, it works on wheels, but it attacks all ferrous metals everywhere. It's an organic material so it's perfectly safe.

This is a car near a railroad. Look what happens:

http://94.100.123.171/1240250001-1240300000/1240276201-1240276300/1240276298_5_sGDT.jpeg

When I did my car, I used 3/4 of a 500ml bottle. Be ready to use alot.

Gotcha.