PDA

View Full Version : Is This DISA Valve Noise?



llll1l1ll
12-24-2011, 01:06 PM
I just had my rattle seals done. I don't think they have failed.


http://www.youtube.com/watch?v=bnhbLhGeTpk&feature=youtube_gdata_player

You should be able to hear the noise. It's like a plastic-y/flapping sound. It's most notable in the middle and ends of the video.

Whitexi
12-24-2011, 02:14 PM
I always thought it made a diesel sound from the videos ive heard, that dosen't sound like it to me.

have you tried unplugging it to see if the sound goes away?

llll1l1ll
12-24-2011, 05:54 PM
No I should try unplugging it.

I was just hoping that noise wasn't my VANOS because I just had it fixed.

MrMaico
12-25-2011, 10:04 AM
I always thought it made a diesel sound from the videos ive heard, that dosen't sound like it to me.

have you tried unplugging it to see if the sound goes away?

When I was checking out my car right before I bought it it was making sort of a diesel sound but it was doing it at idle. A mechanic came out and unhooked the wire and it went away. They took it into the shop and replaced it while I completed the paperwork.

Just a guess but I suppose if the pin/rivet on the Disa flap was loose or gone it could make a sound like you're hearing.

Did you have a Vanos rattle before the rebuild? Did it sound the same or similar?

llll1l1ll
12-25-2011, 07:05 PM
I didn't have much of a rattle before the rebuild. My car sounds exactly the same actually. I'm just making sure I didn't get gypped or something.

It doesn't sound like it would be the VANOS. It sounds like its a plasticy rattle. Since the DISA is plastic I'm just using logic.

Smolck
12-26-2011, 04:33 PM
Doesn't sound all that bad to me. Pull the DISA and check it, pretty simple to do. If that isn't it, have you checked your oil level lately? Sometimes it is the simple things we so easily forget.

Johnmadd
12-27-2011, 12:49 PM
Is it ok to run the engine with the disa wire unplugged to see if the noise goes away?

danewilson77
12-27-2011, 12:52 PM
Is it ok to run the engine with the disa wire unplugged to see if the noise goes away?

Yes.

HTC Thunderbolt+TT

Johnmadd
12-27-2011, 01:06 PM
Yes.

HTC Thunderbolt+TT

Thanks. One more question, will it quite down if unpugged and it actually is making the noise?

LivesNearCostco
12-27-2011, 02:04 PM
I can't remember if the DISA is energized <4000 RPM or above 4000 RPM. If energized and closed <4000, it will be trying to close it at idle and this could make a rattling noise if the pin broke. If the other way, DME will only try to close it above 4000 RPM and any noise <4000 would be a broken DISA flap just "flapping" around due to normal intake airflow.

danewilson77
12-27-2011, 02:40 PM
If the flapper valve is loose... I wouldn't think it would make any difference. I with no power I think the valve is open. Energized... Shut. &gt; 3750 rpms, and plugged in... open.

HTC Thunderbolt+TT

llll1l1ll
12-27-2011, 03:55 PM
I added a touch of oil and the engine seems quieter. Otherwise, I think it's just flappy plastic from a busted DISA valve (though I don't have much of a hesitation around 4K).

danewilson77
12-27-2011, 04:05 PM
I added a touch of oil and the engine seems quieter. Otherwise, I think it's just flappy plastic from a busted DISA valve (though I don't have much of a hesitation around 4K).

If you are confident its that.... You need to remove before the plastic flapper, and more importantly, metal pin, go down your intake, into your engine.

HTC Thunderbolt+TT

llll1l1ll
12-29-2011, 06:49 AM
It has to be the flapper because the noise happens when the engine is still warming up. It is also consistent with how open the throttle is, i.e. it only makes it when I have the pedal in a certain spot (~2,300 in 3rd gear). Does that make sense? I haven't had any coffee and I'm a bit sick.

llll1l1ll
12-29-2011, 07:58 AM
FWIW, I had the car at operating temperature and tried to recreate the noise in the parking lot by revving and holding it where it makes the noise. There was no noise with the DISA plugged in or unplugged.

MrMaico
12-29-2011, 03:22 PM
I think I'm with Smolck on this one......not so sure you even have a problem.:dunno

llll1l1ll
12-29-2011, 07:39 PM
Yeah, I haven't the foggiest and I don't think anybody else does, either.

Should I find anything or something else happens, I'll keep y'all posted.

llll1l1ll
01-03-2012, 05:22 PM
Turns out I was a bit low on oil.