Whitexi
12-23-2011, 04:46 PM
EDIT:
So here's what I ordered.
* 1 x Bi-xenon: FX-R 1.1
o Country Spec: LHD (North American Standard)
$135.00
* 1 x AMP > D2S Ballast Adapters $15.00
* 1 x D2S: Philips 85122+
o Model: Philips 85122+ (4300K)
$95.00
* 1 x E46 Option: Value $15.00
I decided to use the Hella hid ballasts from my OEM fog light kit but grabbed a set of the AMP>D2S adapters just to have. I also found they had a Holiday code for 15% off so instead of the $274.86 shipped I got it all for $235.86 shipped :headbang
So since I basically go to work in the dark and leave work in the dark im quite disappointing with my P46's
I was doing some searching and decided I want the FX-R projectors and have actually talked this over with BP a bit. I know the FX-R's need to be fitted, modded etc in too the headlight but thats not my concern. What i was trying to figure out was if I would...
1. Use my current after market ballasts with the AMP>D2S adapters which just converts the aftermarket ballasts to run the D2S bulb. I was gonna get the Philips 85122+ D2S bulbs also.
2. Just buy the whole FX-R stage III kit with the harness, new ballasts, Philips 85122+
3. Like option 1 but just choose the 3five Morimoto D2S bulbs
4. Like option 2 but with the Morimoto bulbs
Cost.
1. $245
2. $365
3. $200
4. $320
The main issue is idk what watt my current ballast is actually, I never looked but taking Umnitzas word :shifty there supposed to be 50w. Im going to go take a look now and will see if I find anything. EDIT: Turns out I got the shaft, it states 35w on the side and of course its my own negligence for checking two years later. Live and Learn.
Using the Philips 85122+ it says safe with a digital ballast, not sure what that is lol.
Im thinking option 3 or 4 but finding my ballasts are actually 35w I may do option 1. I like options so I made sure there were a few :headbang
So here's what I ordered.
* 1 x Bi-xenon: FX-R 1.1
o Country Spec: LHD (North American Standard)
$135.00
* 1 x AMP > D2S Ballast Adapters $15.00
* 1 x D2S: Philips 85122+
o Model: Philips 85122+ (4300K)
$95.00
* 1 x E46 Option: Value $15.00
I decided to use the Hella hid ballasts from my OEM fog light kit but grabbed a set of the AMP>D2S adapters just to have. I also found they had a Holiday code for 15% off so instead of the $274.86 shipped I got it all for $235.86 shipped :headbang
So since I basically go to work in the dark and leave work in the dark im quite disappointing with my P46's
I was doing some searching and decided I want the FX-R projectors and have actually talked this over with BP a bit. I know the FX-R's need to be fitted, modded etc in too the headlight but thats not my concern. What i was trying to figure out was if I would...
1. Use my current after market ballasts with the AMP>D2S adapters which just converts the aftermarket ballasts to run the D2S bulb. I was gonna get the Philips 85122+ D2S bulbs also.
2. Just buy the whole FX-R stage III kit with the harness, new ballasts, Philips 85122+
3. Like option 1 but just choose the 3five Morimoto D2S bulbs
4. Like option 2 but with the Morimoto bulbs
Cost.
1. $245
2. $365
3. $200
4. $320
The main issue is idk what watt my current ballast is actually, I never looked but taking Umnitzas word :shifty there supposed to be 50w. Im going to go take a look now and will see if I find anything. EDIT: Turns out I got the shaft, it states 35w on the side and of course its my own negligence for checking two years later. Live and Learn.
Using the Philips 85122+ it says safe with a digital ballast, not sure what that is lol.
Im thinking option 3 or 4 but finding my ballasts are actually 35w I may do option 1. I like options so I made sure there were a few :headbang