danewilson77
12-23-2010, 02:49 PM
1. Everything you need is below...I just happen to have 4 brand new roundels that I got from Khoa like 2 years ago.
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_165651.jpg
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_144746.jpg
2. Cut the tabs off new BMW roundels and cut Enkei roundel in half.....
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_164115.jpg
3. Place the 220 grit sandpaper on a smooth surface and lightly sand both the Enkei ring and the BMW roundel matting surfaces.
4. Gorilla Glue the 2 halfs together. Wait for at least two hours to dry. Pics on car after drying time is up.
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_174603.jpg
And I had a B/W hood and trunk roundel as well....lol.
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_165651.jpg
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_144746.jpg
2. Cut the tabs off new BMW roundels and cut Enkei roundel in half.....
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_164115.jpg
3. Place the 220 grit sandpaper on a smooth surface and lightly sand both the Enkei ring and the BMW roundel matting surfaces.
4. Gorilla Glue the 2 halfs together. Wait for at least two hours to dry. Pics on car after drying time is up.
http://i1015.photobucket.com/albums/af278/nicee46/IMG_20101223_174603.jpg
And I had a B/W hood and trunk roundel as well....lol.