Charrie's ZHP project

[cakM3]

I haven't done much regarding my project thread so I decided tonight to "experiment" taking photography of my mistress in low lighting conditions with nothing but the lamp post adjacent to my ZHP for lighting. It was fun and I realize I have lot's of fun in store for me with my D5100 :)

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0140_zps6f97d8ed.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0139_zps430a3964.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0122_zps4b60c6f2.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0118_zpsc3286750.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0099_zps0925b988.jpg

After taking these pics, one thing I do know is that when I send in my OE ZHP alcantara steering wheel for Mike to rewrap, it will be done in black alcantara tri-stitch for the ///M :) I really love how the black alcantara looks in my ZHP :thumbsup Anyway, just wanted to share a few pics tonight :)

[danewilson77]

Agree on black alcantara with ///M tri-stitch. :)

Nice pics Chuck.

HTC DNA, Williamsburg, VA

[cakM3]

Thanks Dane! This camera is amazing!

[danewilson77]

Thanks Dane! This camera is amazing!

Glad you're happy my friend.

HTC DNA, Williamsburg, VA

[328ioc]

I thought you had an M3 rearview mirror?

Sent from my Nexus 10 using Tapatalk 2

[cakM3]

I thought you had an M3 rearview mirror?

Sent from my Nexus 10 using Tapatalk 2

I did but the oval mirror developed bubbling and needs repair. I found this homelink/compass recessed clown nose mirror for a great deal on ebay and jumped on it. After having this mirror on my ZHP I feel it is better suited since my ZHP is more suited for daily driver duties. :)

[WOLFN8TR]

Nice Charlie, Looking Good!

[cakM3]

Nice Charlie, Looking Good!

Thanks Gary! Tomorrow I wash the ZHP and do a really good detailing.....car deserves it and it's been a long time since I put that type of TLC into her...:thumbsup

[WOLFN8TR]

I need some detailing advice from ya.

[cakM3]

you're always welcome to give me a call Gary! You have my number :) I am available to help this evening! :thumbsup

[WOLFN8TR]

Ok will do. Thanks.

[cakM3]

Gary, it was great catching up with you and going over the products I use to detail both my cars :thumbsup I sent you a PM this evening showing you where you can get each item. Let me know if you have any other questions my friend!!! :)

Tomorrow early morning I will be at the car wash giving my ZHP some much needed TLC, then a good detailing....going to get rid of some of the scratches that has been bothering me...:thumbsup

[WOLFN8TR]

Thanks for the Excellent info! Good talking to ya.

[cakM3]

Thanks to Gary and Tony I'm now embarking on yet another project for the ZHP...a complete stereo upgrade. I just sourced a new head unit, and backup camera. I still have to get the 5M BMW Fakra extension kit so that I can get everything connected....

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/ScreenShot2013-07-15at44524PM_zps1a32104f.png

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/ScreenShot2013-07-10at85222PM_zps5c14541b.png

Tony gave me a preview of his Eonon unit when he was over the last time. I liked what I saw so here I am ordering the same unit to replace my aging OE nav system...

The project continues.....one step closer to my perfect ZHP :)

[330i ZHP]

very cool Charlie

Will you be down in MD this weekend?

[cakM3]

very cool Charlie

Will you be down in MD this weekend?

I wish Stu! Looks like I won't be in the area until late August at the earliest due to budget restrictions in government spending...

[WOLFN8TR]

Oh Ya! Project Nav upgrade!

Speaking of government spending cuts, my wife just received a letter regarding Nevada's unemployment going down 36% due to the sequester! Went from $400 a week to $275! Luckily she is working now.

[cakM3]

Yeah Gary...this sequester is going to hurt many people....

[johnrando]

Looking forward to the updates Charlie. Gary, glad she is working again.

[cakM3]

Looking forward to the updates Charlie. Gary, glad she is working again.


Once I have everything to upgrade my stereo I will keep everyone updated but in your case, I'll text you some pics....so you will be the first to know everything my friend :thumbsup

[Tnhl1989]

I'm sure I'll be getting photos of it as well followed by a did you see this on my thread? Oh the ways Charlie makes sure I see his thread updates.

[cakM3]

:rofl

[derbo]

:rolleyes

[cakM3]

A Devlin sent me a cool sticker and I decided to put it on my ZHP. I like how it looks :thumbsup

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/SpaceCoast01_zps8b25d865.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0198_zps184b0cb9.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0180_zps6bdc81ee.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0181_zps27c9a208.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0179_zpsa245a8fd.jpg

[330i ZHP]

Not my cup of tea. But you like it and that's what counts

[328ioc]

I never would have thought to put a sticker there.

Sent from my DROID RAZR using Tapatalk 4 Beta

[derbo]

Not my cup of tea. But you like it and that's what counts

Me either. I'll have what stu's having ;)


On a sidenote, TSE3 is pretty narly besides being from UUC..

[cakM3]

Not my cup of tea. But you like it and that's what counts


Me either. I'll have what stu's having ;)


On a sidenote, TSE3 is pretty narly besides being from UUC..

I wouldn't have thought of placing the sticker here as well but I did not want to clutter my windows as I already have stickers there (not putting anything on my windshield).

I was looking for something different regarding placement of this sticker so this is where the sticker ended up. I'm leaving it there and if I decide I don't like it then it will come off, otherwise I may leave it there for awhile...we'll see what happens.......

[derbo]

If it works for you, keep it :)

[cakM3]

Derek, not sure if it will work for me but I'm naming my ZHP "Stickers" :)

[derbo]

Derek, not sure if it will work for me but I'm naming my ZHP "Stickers" :)

hahah Stickers.

[cakM3]

hahah Stickers.

guess what movie that came from??? anyone?

[330i ZHP]

Don't know Charlie

[Hornung418]

Lol what is happening in this thread??

Stickers? I'm so confused.

From a GS3, this was sent.

[derbo]

No idea whats going on?! but those stickers add +5hp!!

[330i ZHP]

kiesan (or whatever) adds 50

[cakM3]

kiesan (or whatever) adds 50

Kaizen (改善), Japanese for "improvement", or "change for the better" refers to philosophy or practices that focus upon continuous improvement of processes in manufacturing, engineering, and business management. In this case the improvement of both my BMWs :thumbsup

Thanks for the hp boost Stu :)

[BCS_ZHP]

We're doing so many Kaizen events at work that its interfering with actual work, lol.

Btw, like the sticker placement, subtle 'til you notice it.

[cakM3]

Bruce, that was the intent. Thanks for noticing!

[Crickett]

Derek, not sure if it will work for me but I'm naming my ZHP "Stickers" :)


guess what movie that came from??? anyone?

LOL Cars FTW! :rofl

[derbo]

I don't remember that being from CARS?! :X

[cakM3]

LOL Cars FTW! :rofl

Very nice Travis! :thumbsup You're right!

On another note, I took out my OE arm rest and replaced it with the ///M black Nappa Leather arm rest I have been meaning to do for quite some time. The OE ZHP arm rest is going to a very good friend of mine...:thumbsup Loving the look of black Nappa Leather against my alcantara/cloth interior :drool

[johnrando]

I'm not a stickers on paint kinda person but those are subtle and I like the placement.

[yura]

I'm not a stickers on paint kinda person but those are subtle and I like the placement.

+1. Very clean.

[cakM3]

I'm not a stickers on paint kinda person but those are subtle and I like the placement.


+1. Very clean.

thanks guys...

[WOLFN8TR]

Looks Good Charlie.

[cakM3]

Last night my best friend dropped off his OE ///M seats in my garage so that I can begin the next immediate ZHP project.... retrofitting lumbar and side bolster adjustment into my ZHP seats. :thumbsup

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/ScreenShot2013-07-24at91857PM_zpsb469b642.png

[danewilson77]

Last night my best friend dropped off his OE ///M seats in my garage so that I can begin the next immediate ZHP project.... retrofitting lumbar and side bolster adjustment into my ZHP seats. :thumbsup

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/ScreenShot2013-07-24at91857PM_zpsb469b642.png

Have a blast pal.

HTC DNA, Williamsburg, VA

[johnrando]

Have a blast pal.

HTC DNA, Williamsburg, VA

+1

[Avetiso]

Looks great, Charlie. If you can, take a look at how the bolsters are on ZHP seats. I might not be into doing a retrofit, but I might bent them to fit me permanently. Grab a pic or two if you can.

[330i ZHP]

interesting project - in for updates

[TomTomTuning]

I have a bad back (even had surgery) and I really miss having Lumbar adjustments, especially on long road trips.
I intend to eventually do a retrofit or swap seats... I just need to do my homework on it.

[Tnhl1989]

I would love to put side bolsters into my Zhp


Sent from my iPhone using Tapatalk 2

[Pip]

I have a bad back (even had surgery) and I really miss having Lumbar adjustments, especially on long road trips.
I intend to eventually do a retrofit or swap seats... I just need to do my homework on it.

The swap/retrofit is worth it. I do not have a bad back, but it is also not good for my age. I did the retrofit and it had made a big difference in my love for the car and comfort. It can get pricey unless you find some donor seats on Craigslist.

I pulled it off for $160 for both seats (just lumbar).

[Pip]

Charlie, will the seats be useable after you steal the bladders from them? I'd love to get the head rests if they have the ///M on them.

[cakM3]

Charlie, will the seats be useable after you steal the bladders from them? I'd love to get the head rests if they have the ///M on them.

Sean, I sent you a PM sir :thumbsup

[johnrando]

Oh! I should have thought of that Sean, great idea.

[WOLFN8TR]

Nice Charlie! Me Jealous...

[zhpnsnv]

Wow good luck! As much as I miss alcantara and cloth, I am really enjoying lumbar and bolster adjustability.

[cakM3]

Wow good luck! As much as I miss alcantara and cloth, I am really enjoying lumbar and bolster adjustability.

Marc, now I will have the best of everything.... alcantara, lumbar and side bolster support... :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[zhpnsnv]

That'll be amazing. I wouldn't even know where to start in order to make that happen.

[cakM3]

Marc, all it takes is determination to get it done ;)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[Pip]

Marc, all it takes is determination to get it done ;)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

Lumbar is a piece of cake so hopefully bolster support is similar. Go Charlie! Maybe I'll have to find a donor seat for mine now too :)

[zhpnsnv]

Marc, all it takes is determination to get it done ;)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

That's literally all it takes?! For cereal? :biggrin

[BavarianZHP]

Marc, now I will have the best of everything.... alcantara, lumbar and side bolster support... :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

Damn you, just when I thought you already had it all... :drool:drool:drool

Let me know if you ever decide to part with those seats (I'm invoking super-early-dibs...). I'm so jealous!!!!

[cakM3]

Lumbar is a piece of cake so hopefully bolster support is similar. Go Charlie! Maybe I'll have to find a donor seat for mine now too :)

That's nice to know Sean! If I have any questions I'll PM you :thumbsup


Damn you, just when I thought you already had it all... :drool:drool:drool

Let me know if you ever decide to part with those seats (I'm invoking super-early-dibs...). I'm so jealous!!!!

Nice......if I ever get rid of the seats the ZHP will come with them...:p Slowly taking my ZHP more unique :thumbsup ... still got the rain sensor/auto headlight retrofit to do.....

[cakM3]

I received this in the mail today for my ZHP :biggrin

http://img.tapatalk.com/d/13/07/26/vyse5yqa.jpg

http://img.tapatalk.com/d/13/07/26/ure3u8at.jpg

http://img.tapatalk.com/d/13/07/26/za9ate9u.jpg

http://img.tapatalk.com/d/13/07/26/6a7ahuje.jpg

Today was a good BMW day! :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[Avetiso]

Nice!


Sent from my iPhone using Tapatalk 2

[cakM3]

Nice!


Sent from my iPhone using Tapatalk 2

Thank you sir! :)

[330i ZHP]

nice looking option

[330i ZHP]

also, it looks like it integrates well into the e46 rear

[cakM3]

nice looking option


also, it looks like it integrates well into the e46 rear

Thanks Stu! I'm looking forward to getting all of this hooked up and see how well it interfaces to my car :)

[WOLFN8TR]

Hey that's the same camera I bought! All we need now is the Eonon 5150 to ship!

[cakM3]

Hey that's the same camera I bought! All we need now is the Eonon 5150 to ship!

It will happen soon enough Gary! First week in August is the shipment from what I was told.....

[WOLFN8TR]

Really...Hmmm. Luby told me July 27th. No big hurry I suppose as long as I get it and it works. So who will get theirs first? You, Tom or Me?

[cakM3]

We'll see :)

[jayjay_dee]

you gonna love the rearview camera Charlie, one of my favorite mod to my ZHP... plus the new head unit should waken up those HK speakers...

[Hermes]

that's definitely gonna be a lot of work... sounds like it will be a great improvement and well planned out to me

[cakM3]

Yeah JP...I know it will be a lot of work but I will have some help from a very reliable friend and I know it will work out...:thumbsup Seems I have put in a lot of work into my ZHP to get her to where she's currently at :) She's worth all the work I put into her so far! :biggrin :thumbsup

[CERF04ZHP]

Charlie, love all the updates. What did those seats come out of? Any chance I could be sitting in them by the 11th?!?!

[cakM3]

Charlie, love all the updates. What did those seats come out of? Any chance I could be sitting in them by the 11th?!?!

My best friend installed Recaro Sportster CS seats in Imola nappa leather into his ///M so he gave me his seats. These seats have less than 60k miles driven on them. They were in near mint shape so I took them off his hands. Couldn't ask for a better price :) I will be swapping out my seats for these after replacing the seat covers. Then the old seats will become donor seats for my ZHP's lumbar/side bolster adjustment retrofit project I plan to start in a few weeks once I'm done with my final college class.....then I will have lots of time to do what I truly want to do....work on my BMWs :) Channing....trying not to disappoint with my updates...

Eventually my OE alcantara seats will have the lumbar and side bolster adjustment retrofitted into them. :thumbsup Anyway...that's the plan...

[WOLFN8TR]

Wow that's gonna sound Sweet! Mighty fine Selection Charlie!

[cakM3]

Thanks Gary....my ZHP will be unique, that's for sure! :thumbsup I'm sure, not everyone's cup of tea though.....but perfect for me :)

[static667]

My back is cramping up already thinking about leaning into your trunk doing all that wiring... :-P

[cakM3]

I bet ;) But you'll be getting something for your efforts :biggrin


Sent from my iPad using Tapatalk HD

[Avetiso]

WOW. Charlie, you are an animal when it comes to modding cars. I'm gonna hear Tupac thumpin all the way here on the West Coast, right? :)

[johnrando]

No idea but it definitely looks kick a$$!

[cakM3]

When Kyle "upgraded" the stereo system in my ///M, we talked about going big on the stereo system for my ZHP if I was pleased with my upgrade.

What I just posted as my ZHP's stereo upgrade is the result of that discussion. It should do everything I've always wanted in a car stereo. Since I'm an audio guy (Sonar Technician - Submarine Navy) this upgrade is an obvious choice for me ;) Wait till you hear this stereo John :biggrin

What I've been told recently is that what I've been doing regarding modding has been ridiculous. I'm taking that as a good crazy way...:) What can I say????? When the mod bug bit me..... it bit me really hard as you all can see :) There are worse things that can happen in life. I figure since BMWs have become my crazy addiction/passion, I might as well go with the flow and enjoy the ride.

Yeah, my car can be hit and totalled or stolen. That's part of life. If that should happen (god forbid it does!!!) then I will simply move on to my next project. Luckily I will have receipts for everything. :thumbsup

[Avetiso]

Shameless plug...if you're car gets totaled... :shifty You still have me.

Kidding. :) I hope to see your car with 300k on it someday.

Sent from my HTCONE using Tapatalk 4 Beta

[cakM3]

Shameless plug...if you're car gets totaled... :shifty You still have me.

Kidding. :) I hope to see your car with 300k on it someday.

Sent from my HTCONE using Tapatalk 4 Beta

Me too Dario :)

[johnrando]

Definitely looking forward to hearing it. And yes, long live your M (and ZHP) well past 300K.

[cakM3]

:)

[az3579]

I'm appalled that y'all only wish 300k.

I wish INFINITE miles on his cars. :biggrin

Sent from my DROID RAZR MAXX HD

[Torxuvin]

Looking forward to checking out everything/helping with any stereo stuff in September. Should be fun

[cakM3]

I'm appalled that y'all only wish 300k.

I wish INFINITE miles on his cars. :biggrin

Sent from my DROID RAZR MAXX HD


Looking forward to checking out everything/helping with any stereo stuff in September. Should be fun

Thanks guys! :thumbsup I am hoping to have everything set up for the stereo install in September....right now it looks good....or should I say it sounds good? ;)

[330i ZHP]

is that the same backup camera you have on the m3? How is the clarity? field of view? etc?

I assume you like it enough to buy a second unit?

[cakM3]

is that the same backup camera you have on the m3? How is the clarity? field of view? etc?

I assume you like it enough to buy a second unit?

Stu, the ///M retained the OE navigation and from what I understand... the E46 navigation doesnt have this capability.

The camera will go on my ZHP along with the Eonon deck. Then I will have backup camera viewing :)

[330i ZHP]

http://forum.e46fanatics.com/showthread.php?t=773820

[cakM3]

Interesting Stu. I'll have to talk to Steve about this retrofit for the ///M now...thanks! :)

[johnrando]

I'm appalled that y'all only wish 300k.

I wish INFINITE miles on his cars. :biggrin

Sent from my DROID RAZR MAXX HD


Definitely looking forward to hearing it. And yes, long live your M (and ZHP) well past 300K.


Ah hem.

[cakM3]

Definitely looking forward to hearing it. And yes, long live your M (and ZHP) well past 300K.

Sorry John!!! Yes :) You know I always appreciate the positive energy you always put towards my ZHP :thumbsup

[cakM3]

Since I have OE Navigation in my ZHP I will also need the 5M cable extension so that I can have everything work as it's supposed to when I swap out my Navigation for the more updated Eonon head unit.

http://i395.photobucket.com/albums/pp37/macdctr/ZHP%20Stereo/ScreenShot2013-08-07at80350PM_zps4dd2cdd1.png


Also working on getting a set of BMW wheels to replace my replica winter wheels. :thumbsup Because BMW :)

[cakM3]

I just sourced my Gruppe M CAI from a friend today and will be looking at this as my next mod (yes, I have many things going on at the moment)...:) I liked my aFe Stage 2 CAI and it has performed very well but since picking up a Gruppe M CAI for my ///M, I've been wanting to get one for my ZHP as well :thumbsup

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/GruppeM-ZHP02_zpsa8e3a39a.png

Having friends on the forum pays well when it comes to modding our rides! Thanks Derek for this wonderful opportunity! Looking forward to Wednesday when we complete our deal :)

[derbo]

No problem Charlie. What exactly is that little box next to that picture? I dont remember that in my engine bay. Looks like Cruise Control some something like that.

[cakM3]

Derek, that box is used for the driver's side Xenon light and ballast. All coupes have this little box. I have this in my ///M. Apparently, sedans don't get this additional item....

[derbo]

ahh I see. The sedan ballast is under the headlight.

[cakM3]

correct sir :thumbsup

[Hornung418]

Derek, that box is used for the driver's side Xenon light and ballast. All coupes have this little box. I have this in my ///M. Apparently, sedans don't get this additional item....
That part is only particular to M3 coupe/convertible. You can retrofit it onto any e46 though. I have one in my 328i. It's just a relocation bracket and a nice cover. It allowed more clearance for my true CAI to extend into the lower bumper. All in all parts totaled <$25.

I did have to cut the wires and extend them by 6 inches in order to accommodate the new placement.

[cakM3]

That's interesting to know Justin, thanks for sharing that with all of us! :thumbsup I had assumed it was for coupes since I have an ///M. It never occurred to me that this was an ///M specific thing that could be retrofitted...

[derbo]

That part is only particular to M3 coupe/convertible. You can retrofit it onto any e46 though. I have one in my 328i. It's just a relocation bracket and a nice cover. It allowed more clearance for my true CAI to extend into the lower bumper. All in all parts totaled <$25.

I did have to cut the wires and extend them by 6 inches in order to accommodate the new placement.

Justin,

The weird thing is that picture is for a 330i intake... hmmmm

[cakM3]

Derek, could be a 330i with the ballast relocated....

[Hornung418]

Gimme a sec...I think I have a pic in my bucket.

[Hornung418]

Here it can be seen in the right hand side.

9911

[az3579]

Or, it could be from a 330i Coupe.

[cakM3]

Or, it could be from a 330i Coupe.

Actually it would be 330CI coupe...:p I may be wrong though....or maybe not...

[az3579]

Actually it would be 330CI coupe...:p I may be wrong though....or maybe not...

Same f@wking thing, Charlie. lol

[Avetiso]

Same f@wking thing, Charlie. lol

We are enthusiasts. Technicalities must be observed. :thumbsup

Sent from a junkyard via GS4.

[cakM3]

We are enthusiasts. Technicalities must be observed. :thumbsup

Sent from a junkyard via GS4.

My thoughts exactly Dario :biggrin

[derbo]

Or, it could be from a 330i Coupe.

:facepalm I knew it.

[Torxuvin]

One thing we can all agree on
http://assets.diylol.com/hfs/2ae/47f/89b/resized/all-the-things-meme-generator-buy-all-bmw-drift-all-the-roads-65d505.jpg
#threadsave #couldn'tfindbecausecharliememe #needmoarzhppics

[cakM3]

Very nice Cam :thumbsup

[cakM3]

This afternoon I went to the beach after work to take a few pics using my new D800...:) Here are a few pics I took :thumbsup

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0091_zps84efa1d0.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0202_zpsdb74a79f.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0209_zps401dfa1e.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0161_zps5b6b3812.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0216_zps91a52bd9.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0183_zpsecbe4de4.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0174_zps9e91d8bc.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_01692_zps4ce1fbbf.jpg

[Tnhl1989]

I think you are getting the hang of it there Charlie :)

[Torxuvin]

Very nice Charlie. :cheers

[Avetiso]

Loving the blue lights in the DRLs.

[danewilson77]

Very nice Charlie. :cheers

+1

Sent from my Samsung Galaxy S4

[cakM3]

Thanks guys! I was happy with my D5100 and it is an awesome camera to shoot with but shooting with a 36 megapixel camera is another experience.....man is this camera incredible to use! :biggrin

[Johnmadd]

Wow! That camera takes awesome photos! Are you bringing it to the next meet?

[cakM3]

Wow! That camera takes awesome photos! Are you bringing it to the next meet?

You know it John!


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[derbo]

Looking good Charlie

[cakM3]

Thanks Derek! It will look so much better with the Gruppe M CAI though :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[johnrando]

Nice Charlie. Good DoF practice.

[UdubBadger]

Wow! That camera takes awesome photos! Are you bringing it to the next meet?

:facepalm


No credit for the guy behind it huh? :p


Nice work Chuck


Goin' HAM mobile

[danewilson77]

:facepalm


No credit for the guy behind it huh? :p


Nice work Chuck


Goin' HAM mobile

:rofl

[Johnmadd]

:facepalm


No credit for the guy behind it huh? :p


Nice work Chuck


Goin' HAM mobile

I didn't mean it like that lol... but it does make a difference. :)

[WOLFN8TR]

Very nice Charlie. I don't think I've seen any photos of the car dirty. LoL...

[spoonerDee]

Just a few more days Charlie :shifty

[UdubBadger]

I didn't mean it like that lol... but it does make a difference. :)

I beg to differ, talk to CW bout this one, we are switching over to Kodak disposables soon.


Goin' HAM mobile

[Tnhl1989]

I beg to differ, talk to CW bout this one, we are switching over to Kodak disposables soon.


Goin' HAM mobile

Always getting the fun toys!!!.....:(

[cakM3]

I received Derek's Gruppe M CAI this afternoon. Took the afternoon off from work so I could get home and take care of a few things including installing and testing my new CAI :thumbsup

Here are a few pics ... got to say, Derek found another use for the Roundel magazine!
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0430_zps2c514043.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0434_zps3d946a04.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0431_zps9862702f.jpg

The Gruppe M intake taken out of the box...
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0436_zpsa1dec71d.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0437_zps3ceb4f64.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0438_zpsa8a346e3.jpg

Now for the installed pics of my new to me Gruppe M CAI :biggrin
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0444_zps984f44b3.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0443_zpsdb85f3fc.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0445_zps533d7fa1.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0446_zpsfa8d9a90.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0448_zpsb0a64bf7.jpg

The CAI at it's new home next to my BMW Performance CF strut bar :)
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0442_zps013c6c83.jpg

Eventually, I will replace the rubber trim at the edge of my CAI.....but for now, I will enjoy having it installed :thumbsup Thanks again Derek for contributing to my ZHP project thread!

[PirateZHP]

[QUOTE=cakM3;293572]I received Derek's Gruppe M CAI this afternoon. Took the afternoon off from work so I could get home and take care of a few things including installing and testing my new CAI :thumbsup

The CAI at it's new home next to my BMW Performance CF strut bar :)
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0442_zps013c6c83.jpg

I'm jelly...

[johnrando]

It really looks comfy in your car Charlie, it def found a good home. Sweet!

[derbo]

Glad my intake has gone to a good home! :)

I LOLed myself when I put the roundel packing in too.

I noticed your clearance on the intake to the front metal reinforcement seems to be a lot better than mine. Mine was straight touching the piece.

[cakM3]

It really looks comfy in your car Charlie, it def found a good home. Sweet!

Thanks John :thumbsup


Glad my intake has gone to a good home! :)

I LOLed myself when I put the roundel packing in too.

I noticed your clearance on the intake to the front metal reinforcement seems to be a lot better than mine. Mine was straight touching the piece.

Yeah Derek, when I mounted the intake this was one of the things I immediately noticed. There was some space between the front of the intake and metal support bar in front. Once you texted me where you had your support bar mounted, it was very easy to complete my install. Yeah, the Gruppe M will be well taken care of :thumbsup

[330i ZHP]

very cool - and since the latest format and staff writer changes at Roundel...packing material is about all it is good for

[cakM3]

very cool - and since the latest format and staff writer changes at Roundel...packing material is about all it is good for

Very unfortunate but true Stuart.

[derbo]

very cool - and since the latest format and staff writer changes at Roundel...packing material is about all it is good for

I havent even read the one I tore up when I used it for package material. Yea its been bad recently..

[spoonerDee]

What about my contribution??? Punk :)

[cakM3]

What about my contribution??? Punk :)

Keith, I haven't forgotten your contribution either. Once I get my new wheels refinished and snow tires mounted, I will be taking pics and giving you credit for my new winter wheels....:thumbsup

[spoonerDee]

Hurry up mang! :keith

[cakM3]

This week the ZHP got a new home so it too will be covered when not being driven....:)

http://i395.photobucket.com/albums/pp37/macdctr/Library2/DSC_0548_zps3088d7a5.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Library2/DSC_0550_zpscc45359a.jpg

[danewilson77]

This week the ZHP got a new home so it too will be covered when not being driven....:)

http://i395.photobucket.com/albums/pp37/macdctr/Library2/DSC_0548_zps3088d7a5.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Library2/DSC_0550_zpscc45359a.jpg

:drool x2

Sent from my Samsung Galaxy S4

[cakM3]

Thank you sir! :thumbsup

[Torxuvin]

Nice. Both are looking great Charlie

[cakM3]

Thanks Cam :thumbsup

[Hornung418]

How much extra is a garage per month?

GS3 + TT4

[johnrando]

:drool x2

Sent from my Samsung Galaxy S4

+1

[cakM3]

Took the opportunity to take the trusted daily driver out after refreshing my rear wheels...;)

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0749_zps8c19ea79.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0761_zps34a7ca8d.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0759_zps9ec1fd5f.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0764_zps10c4e117.jpg

[danewilson77]

:drool

Sent from my Samsung Galaxy S4

[JupiterBMW]

After adding $251 to the VO and installing a centre console switch with the tire reset button, you'll also need to run a wire from the switch console to the DSC unit.

Otherwise pressing the button has no effect since it's not connected to anything. This is what I have been living with until yesterday....:/

Tony stopped by to help me run that one wire... pin 40 on the connector (X18303) that plugs into the DSC (A65) to the long connector (X1869) Pin 2 that plugs the button panel with the tire reset switch.

One thing to note is that the DSC plug resides in the engine bay so the end that goes into that plug has to have the rubber (water resistent) connector to prevent moisture intrusion into that plug.

Now the next mod is to retrofit rain sensor/auto wipers and auto headlights.....then the ZHP will have all the factory options I care to have for her....:thumbsup Not bad for an '03 ZHP :biggrin

I would just like to say I've been searching for this info for 2 hours now after texting with you this morning Charlie... Again, massive thanks to Tony for being such a master at coding, and thanks to Charlie for posting this info in your project thread.

Now to go investigate my ZHP and get this wire ran...

[cakM3]

I would just like to say I've been searching for this info for 2 hours now after texting with you this morning Charlie... Again, massive thanks to Tony for being such a master at coding, and thanks to Charlie for posting this info in your project thread.

Now to go investigate my ZHP and get this wire ran...

That's what project threads are for :thumbsup Glad to hear something I've posted helped here :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[JupiterBMW]

That's what project threads are for :thumbsup Glad to hear something I've posted helped here :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

It would have helped more if your project thread wasn't 36 freakin pages long. :biggrin Thanks again Chuck!


Sent from my iPhone using Tapatalk Pro!

[cakM3]

It would have helped more if your project thread wasn't 36 freakin pages long. :biggrin Thanks again Chuck!


Sent from my iPhone using Tapatalk Pro!

Sorry about the long project thread Joop ;) I'm glad you were able to "dig" up the necessary information for your mod brother! :thumbsup

[cakM3]

Purchased the other version of the Gruppe M CAI for the ZHP this evening....iirc, this is the one that Chris recently sold when he parted out his ZHP prior to it's sale. I now have the two versions of this CAI :thumbsup

The CAI I purchased tonight:
http://i395.photobucket.com/albums/pp37/macdctr/Gruppe%20M/dfa231e7-5552-430a-9899-d3d87ba18279_zps3f32246b.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Gruppe%20M/24dbaa9c-7e50-40e3-a5d5-2b2f71d9361d_zpsccdf6c84.jpg

The CAI I purchased from Derek a few weeks ago:
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0448_zpsb0a64bf7.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0445_zps533d7fa1.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0444_zps984f44b3.jpg

[330i ZHP]

I prefer the new one - never liked the Kevlar infused unit

but very cool to have both

[cakM3]

Thanks Stuart! Yeah, at least I can make a side by side comparison when I receive the new one :thumbsup Guess more carbon fiber dust being spread again ;)

[johnrando]

:like

[cakM3]

Thank you kind sir! :thumbsup

[Ryans323i]

Baller! Are you deciding which one to keep or are you going to switch them periodically?

Sent from my Nexus 7 using Tapatalk 2

[cakM3]

Baller! Are you deciding which one to keep or are you going to switch them periodically?

Sent from my Nexus 7 using Tapatalk 2

Thanks Ry...:) Going to decide which one to keep and give the other to BP :thumbsup

[az3579]

Thanks Ry...:) Going to decide which one to keep and give the other to BP :thumbsup

Meanwhile your aFe intake keeps getting regifted. :biggrin

[cakM3]

Pay it forward BP.....Pay it forward....;) :thumbsup

[static667]

Pay it forward BP.....Pay it forward....;) :thumbsup

Like my Kosei's will be forwarded to my friend who just picked up am E36 when I get your old M wheels.

Sent from my TI-85 with Tapatalk 4

[Avetiso]

Meanwhile your aFe intake keeps getting regifted. :biggrin
:)

[cakM3]

Like my Kosei's will be forwarded to my friend who just picked up an E36 when I get your old VMR VB3 CSL Rep wheels.

Sent from my TI-85 with Tapatalk 4

There ;) Fixed :thumbsup exactly! :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[derbo]

LOL its just passed on and on.

[spoonerDee]

Still waiting on the hot pink interior retrofit bud!

[cakM3]

Still waiting on the hot pink interior retrofit bud!

Yeah.........right..........:p

On another note Keith....I'll be mounting Blizzaks on my "new to me" winter wheels (225/45 17's) in a few weeks after getting back from Kyle's Outer Banks meet :thumbsup Then I will have the wheels refinished so they look brand spanking new as they were intended. Pics will be made once this happens.....I will be rocking on these wheels this winter as intended bro :thumbsup

[spoonerDee]

Can't wait to see them mang! Are you gonna stick with OEM silver or change them up a bit? When I was going to do it, I was going to go a few shades darker than OEM. Not quite as dark as gun metal or charcoal, but enough to notice the difference.

[cakM3]

I think I'm sticking with OEM colors for these wheels...:)

[cakM3]

My "Spare" Gruppe M intake came in this morning. I decided to swap it for my upcoming trip and see which one I like better. The carbon kevlar unit does add a more aggressive look in my opinion and ties the ZHP to my ///M better.
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0449_zps7d68f90f.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0446_zpsfa8d9a90.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0444_zps984f44b3.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0442_zps013c6c83.jpg

The carbon fiber unit however, blends in perfectly with my BMW Performance carbon fiber strut brace......

http://img.tapatalk.com/d/13/09/21/3e5azyma.jpg

http://img.tapatalk.com/d/13/09/21/zy5e2usy.jpg

http://img.tapatalk.com/d/13/09/21/zude7y4y.jpg

http://img.tapatalk.com/d/13/09/21/y3umuhys.jpg

What do you guys think?


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[johnrando]

I like the way the c/f of the strut bar works with the c/f intake.

[Avetiso]

Carbon fiber.

Sent from a junkyard via GS4.

[danewilson77]

I like the way the c/f of the strut bar works with the c/f intake.

+1

[UdubBadger]

I like the way the c/f of the strut bar works with the c/f intake.


+1
make that +2

looks much cleaner

[cakM3]

Okay....carbon fiber it is :thumbsup

[Tnhl1989]

Carbon fiber! I don't believe I heard or felt the gruppe intake in person yet. I will have to pay a visit soon :). The oem performance intake is quiet compared to the afe. Overall better gas mileage though. I might have to consider another intake sometime.

[cakM3]

Carbon fiber! I don't believe I heard or felt the gruppe intake in person yet. I will have to pay a visit soon :). The oem performance intake is quiet compared to the afe. Overall better gas mileage though. I might have to consider another intake sometime.

Tony, this intake is different from the Performance intake. A different sound from what I was told but I love this intake...

I just drove 500 miles with the carbon fiber Gruppe M intake with a "fully loaded" ZHP and managed to get 29.4mpg on the highway. No issues with the newer Gruppe M CAI.... as expected :thumbsup

@BP....you will have to wait a few weekends before getting "your" Gruppe M intake.....


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[derbo]

LOL. After all this time, BP still manages to get my old gruppe M intake. LOL. The previous owner before me had it in FL. That intake sure is traveling!

Did it come with same bracket?

The CF does match your bar. I prefer the kevlar + M3 bar ;)

[cakM3]

LOL. After all this time, BP still manages to get my old gruppe M intake. LOL. The previous owner before me had it in FL. That intake sure is traveling!

Did it come with same bracket?

Actually.....I willend up with a Kevlar Gruppe M for my ///M and a carbon fiber Gruppe M for the ZHP. Two different personalities just like the car they are mounted on :thumbsup

The CF does match your bar. I prefer the kevlar + M3 bar ;)


No, it did not come with the bracket. The bracket is staying with my ZHP though :)

Actually, I have one of each.....a kevlar Gruppe M for my ///M and a carbon fiber Gruppe M for the ZHP. Two different personalities just like the cars they each are mounted in :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[az3579]

I just drove 500 miles with the carbon fiber Gruppe M intake with a "fully loaded" ZHP and managed to get 29.4mpg on the highway. No issues with the newer Gruppe M CAI.... as expected :thumbsup

Not bad considering your feet are made of solid lead. :biggrin

[cakM3]

Not bad considering your feet are made of solid lead. :biggrin

Amazing just what having 4 wheels inside the car will do regarding how you drive the car. I've been chillin' on the most part driving on the right side of the highway limiting my speed just to 5mph over the posted speed limit. Don't want the wheels to go all over possibly damaging my interior trim....

[cakM3]

Yesterday BP received his Gruppe M intake (shown below) from a very generous mafia member...;)
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0448_zpsb0a64bf7.jpg

This frees up the aFe CAI that will be going to Dario along with a spare intake filter and prefilter. :thumbsup
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/IMG_4637.jpg

Wobz is also sporting this rear view mirror...
http://i395.photobucket.com/albums/pp37/macdctr/ZHP/IMG_3414.jpg

[cakM3]

http://img.tapatalk.com/d/13/10/13/6ugapyme.jpg

http://img.tapatalk.com/d/13/10/13/4azu4y8y.jpg

http://img.tapatalk.com/d/13/10/13/u3ytumuz.jpg

http://img.tapatalk.com/d/13/10/13/myqumupu.jpg

http://img.tapatalk.com/d/13/10/13/su7ugany.jpg




Sent from my DROID RAZR MAXX HD using Tapatalk 2

[elric]

Congrats on the LSD!!!!

[cakM3]

Congrats on the LSD!!!!

Thanks! Figured you would know what I'm up to Jeff! :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[NorCal-Dimitri]

I'm so jealous!

[Johnmadd]

Awesome Charlie! Tell Rob I said "hey".

[cakM3]

Awesome Charlie! Tell Rob I said "hey".

I did, Rob said hey back :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[330i ZHP]

Is that my old LSD?

[Hornung418]

Damn that's nice. Is that Rob's diff or one from Stu's collection?

Wish I could come up. By the time I get there it will be 11pm...everyone will be sleeping...besides the kids...I'm sure they'll be screaming their lungs out lol

GS3 + TT4 now Free ('http://tapatalk.com/m?id=10')

[330i ZHP]

time to go do some donuts

[Johnmadd]

time to go do some donuts

+1 gotta make sure it works... pics are also required

[cakM3]

Thanks Stuart and John! Road test to be done in the morning before I drive home :)


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[johnrando]

Awesome!

Sent from my DROID4 using Tapatalk 2

[cakM3]

http://img.tapatalk.com/d/13/10/13/3azy3a4e.jpg

http://img.tapatalk.com/d/13/10/13/e6eje5u5.jpg

http://img.tapatalk.com/d/13/10/13/y9e3yvuv.jpg

http://img.tapatalk.com/d/13/10/13/eqe8a6us.jpg

Turns out I have some bushings to replace.....this will be the next thing I address on my beloved daily driver :thumbsup

@Rando.....thanks brother!!! :thumbsup

Sent from my DROID RAZR MAXX HD using Tapatalk 2

[JupiterBMW]

So it's a 3.46 with LSD, what model car did this come out of? Or if the LSD is aftermarket, which one??


iPhone 5S. Tapatalk Pro. BOOM

[330i ZHP]

if it is 3.46 - it is TMS

if it is 3.15 - it is Diffsonline

[JupiterBMW]

Ahh ok. Thanks Stu.


iPhone 5S. Tapatalk Pro. BOOM

[Hornung418]

How much was initial cost of the 3.15. That's the diff I want if I ever go LSD.

GS3 + TT4 now Free ('http://tapatalk.com/m?id=10')

[cakM3]

This is a TMS LSD


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[Vas]

Meaning this is the os giken unit ?

[cakM3]

Meaning this is the os giken unit ?

No, its a 3-disk ///M3 style LSD


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[Sockethead]

I put Stu's 3:15 back in my car and removed the 3:46. The 3:15 better suits my driving style since I do a lot of highway driving.
I bought the 3:46 direct from TMS but when the box arrived it had Diffs Online labels and shipping address on it so looks like they build all of TMS diffs too.

FYI for you guys looking to buy one... it was $2800 with the optional 3 disk clutch and Z4 diff cover. They were having a sale on the gears so the 3:46 upgrade was free. I got $400 back when I sent them my old diff as a core.
If you don't plan on FI, the 2 disk version and stock diff cover will do fine and that will lower the price a lot.

Charlie left my house with an ear to ear grin on his face... enjoy my friend! I was great seeing you and I had no problem installing that for you.... You enthusiasm for BMWs is surpassed by none I know!

[Torxuvin]

Nice!

[Johal E32]

http://img.tapatalk.com/d/13/10/13/3azy3a4e.jpg

http://img.tapatalk.com/d/13/10/13/e6eje5u5.jpg

http://img.tapatalk.com/d/13/10/13/y9e3yvuv.jpg

http://img.tapatalk.com/d/13/10/13/eqe8a6us.jpg

Turns out I have some bushings to replace.....this will be the next thing I address on my beloved daily driver :thumbsup

@Rando.....thanks brother!!! :thumbsup

Sent from my DROID RAZR MAXX HD using Tapatalk 2

Awesome!

Which bushing need doing?

I just put it in OEM E46 M3 RTABS with Vorshalg RTAB limiters, and it is awesome!

[cakM3]

I will respond to everyone's questions... I promise!


At the moment I'm at the last rest stop on the Garden State Parkway before heading into NY and Tapanzee Bridge. Many more traffic cluster awaits me and my ZHP... :/

I want to say the traffic has been very heavy and the LSD has performed beyond my expectations! Switching between lanes with a quickness happens automatically....completely effortless compared to the stock diff. At highway speeds my "improved" ZHP wants to pull hard and the speedo rapidly climbs....its amazing folks!!!

I find myself wondering why I haven't done this mod much sooner??? All I can say to everyone is that if you are able to....this is the mod that will provide an immediate performance gain! I'm so glad I did this with Rob's help!

It was also awesome hanging out with Rob, Kpro, and the twins! The twins were well behaved during my stay! ;) Must have been my baldness :)

Again....I can't thank Rob and Kpro enough for this fantastic mod and for Rob's valuable help installing this last night. He makes this job look so easy!!! :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[Sockethead]

Awesome!

Which bushing need doing?

I just put it in OEM E46 M3 RTABS with Vorshalg RTAB limiters, and it is awesome!

It's the rear diff bushing. When we had the diff out I flexed the bushing and we could see that it was starting to go. That bushing needs to be pressed out.

[johnrando]

Good to see you back online Rob. Nice installation work!

Sent from my DROID4 using Tapatalk 2

[Sockethead]

Thanks... Anybody that needs guidance with a diff install, shoot me a pm. I wish I had the time to do a DIY but with the twins, that will never happen...
I will say that its a lot easier than you'd think!

[cakM3]

Rob, thanks for addressing questions while I was driving back home today. Overall the trip back was nice, especially when I got to go on merges....man is my ZHP quick now!...:) Never thought I would ever get this mod on my ZHP....I'm glad I did :thumbsup

Tomorrow the ZHP gets new 120 LED angel eyes installed...:roundel

[derbo]

About time Charlie!! Good stuff!

[cakM3]

About time Charlie!! Good stuff!

Thanks Derek!!! You're right its about time! ;) :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[328ioc]

I think a 3.15 lsd is in the near future for my ZHP.

Sent from my SCH-I545 using Tapatalk 2

[cakM3]

I think a 3.15 lsd is in the near future for my ZHP.

Sent from my SCH-I545 using Tapatalk 2

That's okay too. I was looking for something a little more aggressive to suit my driving style ;) This LSD works for me :thumbsup

[derbo]

That's okay too. I was looking for something a little more aggressive to suit my driving style ;) This LSD works for me :thumbsup

I think you need a 3.64 ;)

sent from my mobile device

[328ioc]

That's okay too. I was looking for something a little more aggressive to suit my driving style ;) This LSD works for me :thumbsup

I am in the same boat as Rob. I do way to much highway driving to warrant anything more than 3.15.

Sent from my SCH-I545 using Tapatalk 2

[Lanister]

Is 3.15 taller than 3.46?

Sent from outer space...

[cakM3]

Is 3.15 taller than 3.46?

Sent from outer space...

Yes.

I drive the highway to and from work everyday and the gearing is fine by me :) Driving back home from Rob and Kpro's home, I was completely at ease with the increased RPM in 6th gear. Even with my Corsa exhsust, I didn't find it annoying.


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[330i ZHP]

The difference between 3.07 and 3.46 at 80mph is about 250rpm. The difference between a 3.07 and 3.15 would be nearly unnoticeable.

[cakM3]

The difference between 3.07 and 3.46 at 80mph is about 250rpm. The difference between a 3.07 and 3.15 would be nearly unnoticeable.

I'm okay with the difference.....just sayin' :)

[derbo]

The difference from 3.46 to 3.62 is about 146rpm at 80mph

sent from my mobile device

[cakM3]

The difference from 3.46 to 3.62 is about 146rpm at 80mph

sent from my mobile device

Ahhhhh!!!

http://i395.photobucket.com/albums/pp37/macdctr/Library2/happy-i-see-what-you-did-there-l_zpsd187a934.png

[330i ZHP]

I was giving the other poster a response on expected RPM change - not you uncle Charlie

[cakM3]

:)

[Sockethead]

The difference between 3.07 and 3.46 at 80mph is about 250rpm. The difference between a 3.07 and 3.15 would be nearly unnoticeable.

When I went from the 3.07 to the 3.46 I gained about 400 RPMs
At 80 MPH, my RPMs were around 3200.
Charlie can you verify?

[330i ZHP]

with 19s is was around 250

I should (when the car/engine is back together) figure out what the rpm is at 80 with the 3.64

[Lanister]

I know I can look it up somewhere but what's the stock ratio on an auto zhp?

[330i ZHP]

3.38 I believe

[cakM3]

When I went from the 3.07 to the 3.46 I gained about 400 RPMs
At 80 MPH, my RPMs were around 3200.
Charlie can you verify?

Rob, I'm seeing 3200 rpm driving at 80 now. Confirmed :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2

[derbo]

Rob, I'm seeing 3200 rpm driving at 80 now. Confirmed :thumbsup


Sent from my DROID RAZR MAXX HD using Tapatalk 2



Mine is about 3300rpm @ 80mph. :)
Stock was 2900rpm if I recall.

using 5th gear on the thunderhill straight is going to be interesting at 112mph


I kinda wish I had a 3.46 Charlie hahaha

[Sockethead]

Mine is about 3300rpm @ 80mph. :)
Stock was 2900rpm if I recall.

using 5th gear on the thunderhill straight is going to be interesting at 112mph


I kinda wish I had a 3.46 Charlie hahaha

Hmm.. I remember mine being around 2700. With the 3.15 it's around 2800...
I have some speedo pics around somewhere... I'll have to dig them up

[cakM3]

I kinda wish I had a 3.46 Charlie hahaha

:biggrin

[330i ZHP]

I would love to step back to a 3.46 or better yet, the 3.15 I sold to Rob - perfect match for SC

[cakM3]

I would love to step back to a 3.46 or better yet, the 3.15 I sold to Rob - perfect match for SC

I'm hoping that by the time I'm ready to add a TS2 to my ZHP, the 3.46 will be okay to use....for now I'm having a blast with it :thumbsup

[330i ZHP]

it will be fine - I was just referring to the 3.15 being a better solution for SC

[cakM3]

it will be fine - I was just referring to the 3.15 being a better solution for SC

Understood sir! I was just making sure my 3.46 will be okay....still getting used to the new gearing...

[330i ZHP]

it will be fine - I used that setup for years

If you do get the TS - you will be amazed at the highway PULLLLLLLL in the upper gears

with 3.46 - 1st and somewhat 2nd are used up QUICK...but 3rd and 4th are awesome - 5th on the hwy is great and the best part, on the hwy you will likely never have to downshift from 6th - so much torque and boost

[cakM3]

I'm planning to install a TS2 after my daughter graduates from college in 4 years. It will happen, of course by that time, I will most likely rebuild my engine and then put on the TS2 :)

[kpro]

Still loving it Charlie?

Let me know when you need a price on snow tires :)