Charrie's ZHP project

[rcwells]

http://uploads.tapatalk-cdn.com/20160222/9e484ab65dae576466c9a0d5d15cdbae.jpghttp://uploads.tapatalk-cdn.com/20160222/ca83820dbd283c30c4e358194ba8cf79.jpg

Thanks to Gary... I might have to take off this bar and have it polished......but then that's what Spring is for ;)


Sent from my iPhone6S using Tapatalk

Beautiful engine bay! Wow. Damn you all for having such beautiful ideas and infecting my mind with your sickness!!

[danewilson77]

Beautiful engine bay! Wow. Damn you all for having such beautiful ideas and infecting my mind with your sickness!!
:happyspidey

Get ready for money to leave your wallet.

Sent from an S6 Edge

[cakM3]

:happyspidey

Get ready for money to leave your wallet.

That's a fact :) A very slippery slope when modding your car :roundel

[WOLFN8TR]

That's a fact :) A very slippery slope when modding your car :roundel

So true...[emoji383] [emoji383][emoji383]

[L0veZHP]

I feel like I have been waiting forever for this! Lol can't wait!

We're all waiting for that day, we'll need them HD pictures too!

[spoonerDee]

lol @ the dip stick. Looks like you're running out of things to mod. :rofl

[cakM3]

lol @ the dip stick. Looks like you're running out of things to mod. :rofl

Getting there.... :drevil

[Sockethead]

Man, you are going to be so depressed when your car is "done"... lol

[cakM3]

Man, you are going to be so depressed when your car is "done"... lol

Time to get another BMW I guess ...

[Karl Lazlo]

Time to get another BMW I guess ...

That' just silly. What single guy needs 3 BMWs...?

[cakM3]

That' just silly. What single guy needs 3 BMWs...?

I wanna be like you Ray!! :p

[Karl Lazlo]

I wanna be like you Ray!! :p

Oh dear. Please, for all that is holy - seek professional mental health assistance.

[fw_fw]

That' just silly. What single guy needs 3 BMWs...?

That is silly....everyone knows he needs 4: A daily driver (ZHP), a track car (M3 or M Coupe), a SAV when the weather is bad (X5 M), and a travel car (M5)

[fw_fw]

That is silly....everyone knows he needs 4: A daily driver (ZHP), a track car (M3 or M Coupe), a SAV when the weather is bad (X5 M), and a travel car (M5)

Sorry forgot one: a small runabout for around the vacation cottage (i3)...so the answer is 5

[cakM3]

you......guys......are......funny.......

[Karl Lazlo]

Frank, I am sorry, but you suck at math. Roll with me on this one:

Qty 1, each: Racecar
Qty 1, each: Tow/service vehicle
Qty 1, each: Daily driver
Qty 1, each: Weekend vehicle
Qty 1, each: Winter beater
Qty 1, each: Panel van (to pick up dates)

6. I count six.

[cakM3]

Qty 1, each: Racecar...................................check! (my M3)
Qty 1, each: Tow/service vehicle...................that's what friends are for ;)
Qty 1, each: Daily driver..............................check! (my ZHP)
Qty 1, each: Weekend vehicle.......................check! (my M3)
Qty 1, each: Winter beater...........................check! (my ZHP)
Qty 1, each: Panel van (to pick up dates).......working on this (M3 Vert)

3. I count 3 for my garage... ;)

[Karl Lazlo]

3. I count 3 for my garage... ;)

Common Core math?

[fw_fw]

Frank, I am sorry, but you suck at math. Roll with me on this one:

Qty 1, each: Racecar
Qty 1, each: Tow/service vehicle
Qty 1, each: Daily driver
Qty 1, each: Weekend vehicle
Qty 1, each: Winter beater
Qty 1, each: Panel van (to pick up dates)

6. I count six.

Damn, you are right, I forgot the van......it is 6!

25274

[rguti153]

That thing is horrible

Sent from my SM-G935V using Tapatalk

[cakM3]

You guys are killing me! No vans in either of my project threads.


Sent from my iPhone6S using Tapatalk

[Johnmadd]

You guys are killing me! No vans in either of my project threads.


Sent from my iPhone6S using Tapatalk

So start the "Charlie van mod and maintenance" thread now before you get started. I can't wait to see this van.

[Karl Lazlo]

So start the "Charlie van mod and maintenance" thread now before you get started. I can't wait to see this van.

And here is the first photo:

http://i485.photobucket.com/albums/rr216/Karl_Lazlo/Public/FB_IMG_1459261686090-1_zpsqeub2lof.jpg (http://s485.photobucket.com/user/Karl_Lazlo/media/Public/FB_IMG_1459261686090-1_zpsqeub2lof.jpg.html)

[spoonerDee]

This has to be chuckles next whip!

http://i1177.photobucket.com/albums/x351/spoonydee/BMW_Isetta_300.jpg

[cakM3]

Mounting my BBS CH summer wheels on the ZHP today with fresh tires :)

http://uploads.tapatalk-cdn.com/20160402/e6ee8bf8379ca9fea9fb4787bf5f4020.jpg


Sent from my iPhone6S using Tapatalk

[cakM3]

In a few weeks I plan to order the following to pursue my 135i Performance BBK retrofit for my ZHP...

Calipers:
https://farm2.staticflickr.com/1707/26097641842_7a992dc324_b.jpg

https://farm2.staticflickr.com/1672/25585334994_86227913da_b.jpg

https://farm2.staticflickr.com/1575/26123909891_380f667abd_b.jpg

M3 Performance Rear Rotors:
https://farm2.staticflickr.com/1648/25917235050_a1e065eb1e_b.jpg

https://farm2.staticflickr.com/1493/25585334574_daca9eed68_b.jpg

Then reordering new longer length stainless steel brake lines to accommodate the new 135i rear Performance calipers...

possibly reordering new parking brake components while I'm already there... then I will soon be completing and detailing the install process for this final Performance BBK upgrade...


yes... I will have plenty of pictures to help document how I will be doing this install :thumbsup

[rguti153]

He'll yeah man !!!!

Sent from my SM-G935V using Tapatalk

[Karl Lazlo]

In a few weeks I plan to order the following to pursue my 135i Performance BBK retrofit for my ZHP...


When do you plan on doing such a retrofit? Wanna make it a two-fer?

[cakM3]

When do you plan on doing such a retrofit? Wanna make it a two-fer?

Ray, once I get my payout from my current company and it's reflected into my bank account, I will give you a heads up just before ordering the necessary parts to accomplish this retrofit. I realized that I initially brought this up back in post #1663 about two years ago so this retrofit is long overdue...

I know there are several members here who have been waiting patiently for me to get off my butt and get this done! Yeah, I'm up for a two-fer if you want to do this as well :) :thumbsup

@ Daniel... maybe I should take my ZHP to Canada in May if I get all of this done before Botond's trip... then you can see the CSL bootlid and Performance BBK together with my BBS CH wheels ;)

[derbo]

I would imagine you need to use the M3 shoes if you are using the M3 rotor since the rotor hat/hub area is deeper than a 330i one. (at least I noticed that when I swapped rear ends)

[cakM3]

I would imagine you need to use the M3 shoes if you are using the M3 rotor since the rotor hat/hub area is deeper than a 330i one. (at least I noticed that when I swapped rear ends)

I have plenty of M3 shoes Derek ;) I will have to see how this pans out...

for sure any issues I may or may not run into will be documented in this retrofit :thumbsup

[WOLFN8TR]

:theman:theman:theman:theman:theman:theman:theman: theman

[cakM3]

oh please.... ;)

[Johnmadd]

Good stuff Charlie.

[cakM3]

Good stuff Charlie.

thank you sir! :thumbsup

[L0veZHP]

Ray, once I get my payout from my current company and it's reflected into my bank account, I will give you a heads up just before ordering the necessary parts to accomplish this retrofit. I realized that I initially brought this up back in post #1663 about two years ago so this retrofit is long overdue...

I know there are several members here who have been waiting patiently for me to get off my butt and get this done! Yeah, I'm up for a two-fer if you want to do this as well :) :thumbsup

@ Daniel... maybe I should take my ZHP to Canada in May if I get all of this done before Botond's trip... then you can see the CSL bootlid and Performance BBK together with my BBS CH wheels ;)

I'm so waiting for all of this to be done! Your Project Thread is one of my bookmarks and your DIY showed me how to install my M3 Mirrors! I also want to see your brake Retrofit and DIY, it's something I want to do too. I also want a CSL trunk for my sedan but don't like how the lines don't match up on the trunk with the lights. Thanks Charlie again for your DIY! And for being so informative!

[cakM3]

I'm so waiting for all of this to be done! Your Project Thread is one of my bookmarks and your DIY showed me how to install my M3 Mirrors! I also want to see your brake Retrofit and DIY, it's something I want to do too. I also want a CSL trunk for my sedan but don't like how the lines don't match up on the trunk with the lights. Thanks Charlie again for your DIY! And for being so informative!

I'm glad that the work I have done to my ZHP has actually helped you to do the OEM M3 side mirror retrofit :thumbsup Having installed an OEM CSL bootlid on my M3, I can say doing so it a fairly easy process. The hardest part of the install is to align the bootlid so the lights on the bootlid align with the tail lights. Daytona Violet from M3 Forum has an awesome CSL Bootlid DIY which is what I used when I installed mine. :)

Once I start my 135i rear caliper retrofit I will be sure to detail how to do this retrofit. :) Keep an eye out for it :thumbsup

[cakM3]

Both of my diamond keys for my ZHP are now dead... the rechargeable battery inside finally died so I will be replacing them once my order for new batteries arrive. I found batteries that I can use as a direct replacement on eBay.... I will be detailing the battery replacement on my Diamond Key when the new batteries arrive...

Here is the link to the batteries I purchased today...
http://www.ebay.com/itm/VL2020-3V-20mAh-Battery-Rechargeable-Button-Li-ion-Cell-Batteries-For-BMW-Fobs/131754815195?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D20150313114020%26meid%3Df527d6015ded4ac7b9f ec0605c5f9f80%26pid%3D100338%26rk%3D11%26rkt%3D25% 26sd%3D161908602890 (http://www.ebay.com/itm/VL2020-3V-20mAh-Battery-Rechargeable-Button-Li-ion-Cell-Batteries-For-BMW-Fobs/131754815195?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D20150313114020%26meid%3Df527d6015ded4ac7b9f ec0605c5f9f80%26pid%3D100338%26rk%3D11%26rkt%3D25% 26sd%3D161908602890)

Panasonic VL2020-3V-20mAh Battery Rechargeable Li-ion Cell Battery

You will have to pry the key open to access the battery...
http://uploads.tapatalk-cdn.com/20160406/dda580f66203e16b588a50e67d4730ff.jpg

http://uploads.tapatalk-cdn.com/20160406/5bbd78b2e3321b55721a062c4362e6a1.jpg

http://uploads.tapatalk-cdn.com/20160406/18547f020877d48e91f0ecf8a39f858e.jpg

Replacement battery looks like this...
http://uploads.tapatalk-cdn.com/20160406/6d6994af883bf1f27854db59cdbcbe92.jpg

http://uploads.tapatalk-cdn.com/20160406/1863426f271484d0cb9fad7dc4050998.jpg

http://uploads.tapatalk-cdn.com/20160406/0abbf79bd0704d3367e247342b41e0b1.jpg

Should be an easy replacement :)

[FL116]

I may have to do this on one of my keys. The battery is dead as well

[ELCID86]

Just super glue it back together? Any programming required?

[cakM3]

Just super glue it back together? Any programming required?

There will be some gluing yes... key can be reprogrammed, this is a simple process :thumbsup End result will be a fully restored key with fresh rechargeable battery. Better than having to buy a new key from BMW (remember you only have a limit of 10 keys for your car)...my ZHP, for some reason, is on key# 5 out of 10 allotted to it...

[ELCID86]

There will be some gluing yes... key can be reprogrammed, this is a simple process :thumbsup End result will be a fully restored key with fresh rechargeable battery. Better than having to buy a new key from BMW (remember you only have a limit of 10 keys for your car)...my ZHP, for some reason, is on key# 5 out of 10 allotted to it...

I think Botond recommended disabling the keys not in our possession as an added security step. Though i think it would be rare for someone to hang onto or find a key and snatch the car.

[cakM3]

I think Botond recommended disabling the keys not in our possession as an added security step. Though i think it would be rare for someone to hang onto or find a key and snatch the car.

Yeah, next time Botond is up here we will disable all unused keys from both of my cars....for some unknown reason, my PA Soft crapped out...

[kakashi169]

Checking daily for the BBK updates. :grooving

[cakM3]

Checking daily for the BBK updates. :grooving

I will send you a PM/Message as soon as I begin placing orders for my BBK upgrade :)

[Karl Lazlo]

I will send you a PM/Message as soon as I begin placing orders for my BBK upgrade :)

Please add me to that notification chain.

[Whammy]

Both of my diamond keys for my ZHP are now dead... the rechargeable battery inside finally died so I will be replacing them once my order for new batteries arrive. I found batteries that I can use as a direct replacement on eBay.... I will be detailing the battery replacement on my Diamond Key when the new batteries arrive...

Here is the link to the batteries I purchased today...
http://www.ebay.com/itm/VL2020-3V-20mAh-Battery-Rechargeable-Button-Li-ion-Cell-Batteries-For-BMW-Fobs/131754815195?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D20150313114020%26meid%3Df527d6015ded4ac7b9f ec0605c5f9f80%26pid%3D100338%26rk%3D11%26rkt%3D25% 26sd%3D161908602890 (http://www.ebay.com/itm/VL2020-3V-20mAh-Battery-Rechargeable-Button-Li-ion-Cell-Batteries-For-BMW-Fobs/131754815195?_trksid=p2141725.c100338.m3726&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%2 6asc%3D20150313114020%26meid%3Df527d6015ded4ac7b9f ec0605c5f9f80%26pid%3D100338%26rk%3D11%26rkt%3D25% 26sd%3D161908602890)

Panasonic VL2020-3V-20mAh Battery Rechargeable Li-ion Cell Battery

You will have to pry the key open to access the battery...
http://uploads.tapatalk-cdn.com/20160406/dda580f66203e16b588a50e67d4730ff.jpg

http://uploads.tapatalk-cdn.com/20160406/5bbd78b2e3321b55721a062c4362e6a1.jpg

http://uploads.tapatalk-cdn.com/20160406/18547f020877d48e91f0ecf8a39f858e.jpg

Replacement battery looks like this...
http://uploads.tapatalk-cdn.com/20160406/6d6994af883bf1f27854db59cdbcbe92.jpg

http://uploads.tapatalk-cdn.com/20160406/1863426f271484d0cb9fad7dc4050998.jpg

http://uploads.tapatalk-cdn.com/20160406/0abbf79bd0704d3367e247342b41e0b1.jpg

Should be an easy replacement :)

Interesting idea.

I've noticed one of my keys is having issues. I think it is not storing the memory information correctly in the key. I noticing my passenger mirror does not stay in the correct location with this key. Originally I thought it was the memory seat module, but that has been replaced. I've thought of ordering a new key.

[cakM3]

Interesting idea.

I've noticed one of my keys is having issues. I think it is not storing the memory information correctly in the key. I noticing my passenger mirror does not stay in the correct location with this key. Originally I thought it was the memory seat module, but that has been replaced. I've thought of ordering a new key.

Jeff, why pay $250 for a new key when you can just replace the old worn battery with a brand new rechargeable battery I had linked in my thread? Unless you don't feel comfortable doing soldering repairs I can see why you would consider just getting a new key instead.


I have taken several diamond style keys apart and it's a fairly easy and straightforward process. There are two points where you will de-solder the old battery and solder the new one. Very easy process.

Then you seal the key using JB Kwik Weld and allow to cure. That's it. :thumbsup

[WOLFN8TR]

Charlie's Key Repair 1 800 FIX KEYS [emoji2]

[Karl Lazlo]

Charlie's Key Repair 1 800 FIX KEYS [emoji2]

CALLING NOW!

[WOLFN8TR]

[emoji2][emoji106]

[cakM3]

CALLING NOW!

Ray...we can talk about this on Sunday over awesome wings at J Timothy's Tavern :drevil

http://uploads.tapatalk-cdn.com/20160414/f859b5f7730111cf505898a8f0f63e0b.jpg
http://uploads.tapatalk-cdn.com/20160414/88f09ce8e806267d9d861e8c11d80e88.jpg

http://uploads.tapatalk-cdn.com/20160414/918e68e85bf3d18a5fa4ecb57dfac551.jpg

I'm hungry for these already!

[Whammy]

Jeff, why pay $250 for a new key when you can just replace the old worn battery with a brand new rechargeable battery I had linked in my thread? Unless you don't feel comfortable doing soldering repairs I can see why you would consider just getting a new key instead.


I have taken several diamond style keys apart and it's a fairly easy and straightforward process. There are two points where you will de-solder the old battery and solder the new one. Very easy process.

Then you seal the key using JB Kwik Weld and allow to cure. That's it. :thumbsup

Not a fan of soldering truthfully. Had to do it on a radio wiring harness. While it was fun learning, I'm not sure if I want to do it my keys.

Want to do it for me? ;)

[cakM3]

Want to do it for me? ;)

How about it I do mine first and see what happens? I am not a fan of working on someone else's key until I know there won't be any issues when doing this type of work...

[Whammy]

How about it I do mine first and see what happens? I am not a fan of working on someone else's key until I know there won't be any issues when doing this type of work...

I'm ok with that!

[cakM3]

Going to clean ZHP today

[WOLFN8TR]

Hey Charlie I replaced my battery in my ZHP key. Be careful cutting it apart....

:swiss

[cakM3]

Hey Charlie I replaced my battery in my ZHP key. Be careful cutting it apart....

:swiss

I've done a few diamond key mods Gary... thanks for the heads up, I got this :drevil

On another note... I installed my bike rack on the ZHP because I decided I'm going to start riding... I'm not like others here who are marathon riders... I haven't ridden in a few years so I'm just getting my pfat azz out there to slowly lose unwanted fat! The more I ride, the better I will start to feel - I know this...

https://farm2.staticflickr.com/1520/26240614210_6f0c2e6cbb_h.jpg

https://farm2.staticflickr.com/1567/26487517696_4e983fe260_h.jpg

https://farm2.staticflickr.com/1491/26513456165_abc723a6c6_h.jpg

https://farm2.staticflickr.com/1663/26240613900_63dd98335c_h.jpg

https://farm2.staticflickr.com/1531/26513455605_5552608acb_h.jpg

First part is getting the bike rack installed.... the next will be getting my bike ready and start riding...

[Johnmadd]

Nice Charlie.

[ELCID86]

Awesome that your gunna ride. I ordered new screws for mine today as I thought they were attached and when I took it off last time I lost 2-3 of them. ;-(. Looks like I have to order the new key/wrench too as I can't find a key number.

[cakM3]

Thanks Shawn! Weather is getting better so I need to get my ass out there and start enjoying the countryside! The exercise will be good for me as well :)


Sent from my iPhone6S using Tapatalk

[Whammy]

Nice Charlie! I need to get my rack installed.

[QC_ZHP]

Love that setup. Me and my girlfriend are picking up bikes this summer so I may have to copy it!

[cakM3]

Interesting idea.

I've noticed one of my keys is having issues. I think it is not storing the memory information correctly in the key. I noticing my passenger mirror does not stay in the correct location with this key. Originally I thought it was the memory seat module, but that has been replaced. I've thought of ordering a new key.

Jeff, I just replaced the key to one of my ZHPs dead key fobs this afternoon. I also posted a DIY on how to do this today. Here's the link :thumbsup

http://www.zhpmafia.com/forums/showthread.php?18166-Diamond-Key-Rechargeable-Battery-Replacement-DIY&p=486886#post486886 (http://www.zhpmafia.com/forums/showthread.php?18166-Diamond-Key-Rechargeable-Battery-Replacement-DIY&p=486886#post486886)

[cakM3]

I pulled my ZHP out of the garage today when I reprogrammed my repaired key fob and one of my neighbors told me that I had something sticking out of my front wheel. Of course I went out to examine what she was talking about then she realized her error and told me that she was looking at my brake caliper. I laughed and said they are big aren't they? and she agreed :) Just had to mention this in my project thread ;)

[Whammy]

Jeff, I just replaced the key to one of my ZHPs dead key fobs this afternoon. I also posted a DIY on how to do this today. Here's the link :thumbsup

http://www.zhpmafia.com/forums/showthread.php?18166-Diamond-Key-Rechargeable-Battery-Replacement-DIY&p=486886#post486886 (http://www.zhpmafia.com/forums/showthread.php?18166-Diamond-Key-Rechargeable-Battery-Replacement-DIY&p=486886#post486886)

Thanks Charlie for this! I think I will attempt it.

[ELCID86]

Size does matter ;-)

[cakM3]

Thanks Charlie for this! I think I will attempt it.

Any time Jeff! :thumbsup If you have any question send me a text.... number is in the members only contact thread. :)


Size does matter ;-)

Very nice Shawn!!! :biggrin

[cakM3]

I ordered these for my ZHP this morning :drevil

https://farm2.staticflickr.com/1598/26690060965_96fb58c44b_o.png

Lighting output was amazing on my M3 so I will now retrofit these X5 LED fog lights onto my ZHP :thumbsup Pretty soon no more HID fogs!

http://www.ebay.com/itm/381192430914?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.com/itm/381192430914?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)

[09mageec]

I ordered these for my ZHP this morning :drevil

I really have to see these in person, because I'm sure the pictures you sent me don't do them any justice.

[cakM3]

I really have to see these in person, because I'm sure the pictures you sent me don't do them any justice.

You already did Cam. These are already installed on my M3! I pointed them out to you as I was leaving the Broke East meet when you walked up to my car...

[Sockethead]

If I remember right from the pics, they color match pretty good too...

[cakM3]

If I remember right from the pics, they color match pretty good too...

No complaints so far Rob! :thumbsup

[BADCLOWN]

Are you planning a write up in install for these?

[cakM3]

Are you planning a write up in install for these?

Look at my M3 project thread Jacob :thumbsup

It's there [emoji41]

My new X5 LED fogs will arrive on the 5th. Will be looking to remove my HID fogs for these during the following weekend.

http://uploads.tapatalk-cdn.com/20160429/ffadee5e6d008abf8e2a2ffdb56be643.jpg

[rguti153]

Im thinking about buying a set now , getting tired of running ny yellow fogs want something different n a cleaner look in the front

Sent from my SM-G935V using Tapatalk

[cakM3]

Im thinking about buying a set now , getting tired of running ny yellow fogs want something different n a cleaner look in the front

What sets both of my cars apart from everyone else in my opinion are my lights. I like a nice clean output in light output. Together with rebuilt ZKW headlights and Orion V4 angel eyes, these LED fog lights tie everything together. They come in 6000k lighting and my Orion V4's are 6000k so all I need to do is swap out my 5000k D2S for some 6000K D2S and my ZHP will be set up :drevil

[rguti153]

What sets both of my cars apart from everyone else in my opinion are my lights. I like a nice clean output in light output. Together with rebuilt ZKW headlights and Orion V4 angel eyes, these LED fog lights tie everything together. They come in 6000k lighting and my Orion V4's are 6000k so all I need to do is swap out my 5000k D2S for some 6000K D2S and my ZHP will be set up :drevil
They look great !

Sent from my SM-G935V using Tapatalk

[WOLFN8TR]

Im thinking about buying a set now , getting tired of running ny yellow fogs want something different n a cleaner look in the front.

Me too, so I purchased a set lastnight. [emoji106]

[cakM3]

Me too, so I purchased a set lastnight. [emoji106]

Awesome Gary!!

[cakM3]

Wheels are cleaned and waxed, installed carbon fiber diffuser is waxed [emoji1360]
http://uploads.tapatalk-cdn.com/20160430/2046da2adb0e3bbe85fc1d924722b860.jpg
http://uploads.tapatalk-cdn.com/20160430/c3523ab7b779e9f36acacb6c108574b5.jpg



Sent from my iPhone6S using Tapatalk

[BADCLOWN]

Charlie I've got a 2x2 weave rear diffuser, contemplating getting mine clear bra wrapped. Have you experienced any issues with yours?

[Johnmadd]

Damn, that diffuser is shiny. :thumbsup

[cakM3]

Charlie I've got a 2x2 weave rear diffuser, contemplating getting mine clear bra wrapped. Have you experienced any issues with yours?

Jacob, I have not experienced any issues with my diffuser. During winter months, I swap out diffuser panels and store my carbon fiber diffuser. When using my carbon fiber diffuser, I keep it cleaned and waxed while it is in use :)


Damn, that diffuser is shiny. :thumbsup

Thanks John!

[Sockethead]

I've never had an issue with my CF diffuser either... They don't get much abuse back there

[Rovert]

Nope. Unless you're really horribly at backing into high curbed areas. LOL

[cakM3]

Nope. Unless you're really horribly at backing into high curbed areas. LOL

Exactly Trevor! :)

[Jconlin16]

I neeed a carbon fiber diffuser on my car. That is beautiful!

[rguti153]

Exactly Trevor! :)
sent you a private message

Sent from my SM-G935V using Tapatalk

[cakM3]

sent you a private message

Sent from my SM-G935V using Tapatalk

Back at ya.... sent you PM

[BADCLOWN]

You said these roughly match 5k output right? Would you recommend replacing bulbs on the headlights to match? I know you have a headlight rebuild but I do not

[cakM3]

You said these roughly match 5k output right? Would you recommend replacing bulbs on the headlights to match? I know you have a headlight rebuild but I do not

They match 6k output Jacob.

[BADCLOWN]

My Bad, was trying to recall what was said in he earlier posts and was apparently wrong ha. Is that what our headlights output is out of the box/stock

[cakM3]

My Bad, was trying to recall what was said in he earlier posts and was apparently wrong ha. Is that what our headlights output is out of the box/stock

Stock they are 4300k. You change out the stock D2S bulbs for 6000k D2S bulbs then the headlights will match the LED Fogs.

It's more of a challenge finding halogen H7 bulbs that match the 6000k color band.

[BADCLOWN]

I'll have to dig around for some ds2 6k bulbs to drop in then when I pick these fogs up

[cakM3]

I'll have to dig around for some ds2 6k bulbs to drop in then when I pick these fogs up

[emoji1360][emoji41]

[WOLFN8TR]

Oh cool I already have 6K bulbs! [emoji106][emoji106]

[BADCLOWN]

First two companies that come up on google search are jdmtoys and highperformancebulbs. Both have a pair for 40 bucks plus shipping


The Philips ultinon seem nice at 175 bucks for the pair though

[cakM3]

First two companies that come up on google search are jdmtoys and highperformancebulbs. Both have a pair for 40 bucks plus shipping


The Philips ultinon seem nice at 175 bucks for the pair though

I'm assuming you're taking about D2S bulbs Jacob. For the LED fogs this is where I got them from... IJDMToy

Right now they have them for $159 and $10 off right now with FREE shipping! Gary just purchased a set from the link below.

http://store.ijdmtoy.com (http://store.ijdmtoy.com)

[BADCLOWN]

Yeah, that's where I planned to get the fogs from, are the Philips bulbs worth it?

[cakM3]

Yeah, that's where I planned to get the fogs from, are the Philips bulbs worth it?

Jacob, from what I have heard the Phillips bulbs (OSRAM) are the best.

[cakM3]

Since I took pics of the M3 using my new Nikon, I couldn't leave my ZHP out so here are a few pics... the fog light covers will be coming off this weekend when I replace the fog lights for the X5 LED versions...

https://farm2.staticflickr.com/1466/26781563335_64ca651e13_o.jpg

https://farm2.staticflickr.com/1471/26177655233_f632d9b957_o.jpg

Those blue H7 bulbs really look menacing on my Imola ZHP :drevil

[cakM3]

http://uploads.tapatalk-cdn.com/20160505/8e9e9336aed4f4c016abb2fb659033af.jpg
http://uploads.tapatalk-cdn.com/20160505/ae250a0c0d6ff576dad4efe55a516973.jpg

These showed up at my door step this afternoon ;) I will wait until the weather improves before installing these [emoji1363]


Sent from my iPhone6S using Tapatalk

[WOLFN8TR]

Hey those look familiar! [emoji41]

[cakM3]

Hey those look familiar! [emoji41]

Thanks to you Gary.... I will be applying your mod to my new fogs and will be installing them hopefully soon.... then I will get back to my M3 and apply the final fix to it... then all my cars will be set up :thumbsup

[WOLFN8TR]

Did these show up already? [emoji15]

http://uploads.tapatalk-cdn.com/20160519/118c650f363e7328e5ef7bc13c5bb9c9.jpg

[cakM3]

Yes they did Gary!! Thank you sir!!! [emoji41][emoji1360]
http://uploads.tapatalk-cdn.com/20160521/6be4ad0452ed114cee6242ce39443a2e.jpg


Sent from my iPhone6S using Tapatalk

[rkneeshaw]

What am I looking at?

[WOLFN8TR]

What am I looking at?

GWOLF INDUSTRIES LED FOG LIGHT BRACKETS

[cakM3]

X5 LED Fogs will be installed on my ZHP this upcoming weekend as long as the weather is nice outside...then I should have clean lighting with both of my BMWs... :)

[cakM3]

I've been showing my P-car so much love lately that I am now focusing on my ZHP today. Once I get done having my morning coffee, I will be giving my ZHP a nice wash and then begin taking out my HID fog lights and installing new X5 LED fog lights... ZHP is going to get the same lighting "treatment" as my ///M today :drevil

[WOLFN8TR]

Awesomeness.....:applause

[cakM3]

Thanks to Gary I have a much more secure way of securing my X5 LED fogs to my ZHP [emoji1360][emoji41]

http://uploads.tapatalk-cdn.com/20160528/89ecfe1b6e8496639f7a44f1cea62014.jpg
Took off my OEM E46 fog lights including the HID ballasts...
http://uploads.tapatalk-cdn.com/20160528/37aea37e10a92bf4eca43f6fe981fa1e.jpg

Then finished trimming off one of the brackets and tabs off the new fog enclosures...
http://uploads.tapatalk-cdn.com/20160528/6c4d77b50a1fb31296666a097ee1cf15.jpg
http://uploads.tapatalk-cdn.com/20160528/262425995ea6c2b045ebc8bfe1affdde.jpg
http://uploads.tapatalk-cdn.com/20160528/2e7230dc3df7d61688d0ee61001777a6.jpg

Then painted the exposed metal
http://uploads.tapatalk-cdn.com/20160528/5e3fa14592aef6afa6b67159a586afc9.jpg

Then found a very minor snag which forced me to change out a plug
http://uploads.tapatalk-cdn.com/20160528/67efeed24a4098abf4149ca9d32bc499.jpg
http://uploads.tapatalk-cdn.com/20160528/ee0c11d7a738a0ee9de8f7d2ca4b8f7f.jpg
Seems that the plug that comes with the new LED ballast is too small for my ZHP's OE fog light harness so I got a plug from a few bsllasts that I had laying around...and used them! ;)
http://uploads.tapatalk-cdn.com/20160528/1d2d90733c5e7e67d1364ba71d7f57ca.jpg

Then I spliced the plug to the new ballasts after verifying where each wire went since these fogs won't go on if you have the two wires reversed...
http://uploads.tapatalk-cdn.com/20160528/b95fee79d027bacb003314905a125449.jpg
http://uploads.tapatalk-cdn.com/20160528/8c8316b23c992984e258b4df5f123c9c.jpg

Then I sealed the connections with liquid electrical tape ensuring there will not be any moisture intrusion there
http://uploads.tapatalk-cdn.com/20160528/12b862cf777add3173aa48099748b475.jpg

After the liquid tape firmed up, I went ahead and made all the connections and mounted the LED fogs to my ZHP...
http://uploads.tapatalk-cdn.com/20160528/912bf1d1303f867a883cd1ca531c7542.jpg
Did a quick check with successful results :)
http://uploads.tapatalk-cdn.com/20160528/07e3229c2cd3859db5cbd591cd4cee13.jpg
http://uploads.tapatalk-cdn.com/20160528/1553b0fe869abdbded9552ecb774829d.jpg
Finished everything...well, almost but I turned on my fogs to see the results I was looking for...
http://uploads.tapatalk-cdn.com/20160528/009ca8881244e91655c2fef9ec5c11e2.jpg
Then put my fog surrounds on and got a perfect fitment.

Other than the summer heat starting...the install was done at a leisurely pace and I was able to work out any "minor issue" to ensure the results I was going for ;) Overall pleased with my install. Next will be painting out my CSL bootlid snd fog surrounds so I csn have a clean looking ZHP :drevil


My HID fog lights and ballasts will be going to a good friend of mine soon :thumbsup


Sent from my iPhone6S using Tapatalk

[cakM3]

http://uploads.tapatalk-cdn.com/20160612/069baaa513e8119335fe726223f8fac4.jpg

Botond stopped over today and updated a few coding features. My one touch triple blink now blinks 5x instead of three :)


Sent from my iPhone6S using Tapatalk

[danewilson77]

I recognize those legs.

S7 Edge, out

[Johnmadd]

I recognize those legs.

S7 Edge, out

It would suck to be draymonded by BP rofl

[johnrando]

:)

Sent from my SM-G935V using Tapatalk

[cakM3]

:)

+1


Sent from my iPhone6S using Tapatalk

[az3579]

I recognize those legs.

S7 Edge, out

You weren't supposed to tell anyone about that...


It would suck to be draymonded by BP rofl

Say what now? lol

[derbo]

Hey Charlie,

I'm looking at the X5 LED fogs on retrofit source and they look different than the ones you have?

Any idea why it is like that?

https://www.theretrofitsource.com/closeouts/bmw-x5-oem-led-fog-lights.html

[WOLFN8TR]

Here ya go.

https://www.ebay.com/itm/381192430914

[derbo]

Here ya go.

https://www.ebay.com/itm/381192430914

Thanks!

[cakM3]

Got my new cell phone mount installed in my ZHP today.
http://uploads.tapatalk-cdn.com/20160618/e5b0ce53adb81656492c4ee986ea48df.jpg
http://uploads.tapatalk-cdn.com/20160618/b40687fad3c4fe12f6ce1df8c1895afe.jpg
http://uploads.tapatalk-cdn.com/20160618/95d766199ad2b37d92e4a7d150accd85.jpg

I find this mount is much more stable and holds my iPhone ore securely. Once I place my phone on this mount, it doesn't move even when driving over rough surfaces. Much improved over the Core360 mount I used to have in my car.


Sent from my iPhone6S using Tapatalk

[WOLFN8TR]

Charlie how does it hold the phone?

[cakM3]

Charlie how does it hold the phone?

Gary, my iPhone remains exactly in the same position I mounted it even if I drive over rough roads. [emoji1360]


Sent from my iPad using Tapatalk

[WOLFN8TR]

No how does it actually hold on to the phone?

[BMWCurves]

No how does it actually hold on to the phone?

http://i.imgur.com/kfNt7pj.jpg

[cakM3]

http://i.imgur.com/kfNt7pj.jpg

Yes


Sent from my iPhone6S using Tapatalk

[NoVAphotog]

No how does it actually hold on to the phone?

Very happy that these are working out for you, Charlie and Shawn. Great mounts for the price!

Gary, There is a metal plate that comes with it. You put that between your case and phone and then that attaches to the magnetic face of the mount.

[WOLFN8TR]

Very happy that these are working out for you, Charlie and Shawn. Great mounts for the price!

Gary, There is a metal plate that comes with it. You put that between your case and phone and then that attaches to the magnetic face of the mount.

Gotcha...:thumbsup

[cakM3]

New project getting lined up for the ZHP this week.... I am still working to get the 135i rear calipers.... once I source them then I will be going forward with the retrofit this summer..... but in the mean time... I'm working on getting something wonderful for my ZHP this week....;)

[Sockethead]

Trunk lid?

[cakM3]

Trunk lid?

I just purchased Kevin's Intravee II setup and will be installing this into my ZHP over the weekend... will be doing the CSL bootlid next :)

[L0veZHP]

http://uploads.tapatalk-cdn.com/20160612/069baaa513e8119335fe726223f8fac4.jpg

Botond stopped over today and updated a few coding features. My one touch triple blink now blinks 5x instead of three :)


Sent from my iPhone6S using Tapatalk

How did you get one touch 3 blinks?
I've always wanted that comfort

[Rovert]

You need the latest LCM from a 2006 I think.

[NoVAphotog]

How did you get one touch 3 blinks?
I've always wanted that comfort

You need to find an LCM with s/w 4.0 or 4.5 or check and see if your car already has it (on mobile can't see your sig). And then have it coded by a member here or DIY if you are so inclined but BP is (one of) the coding gurus we have on here. :thumpsup

[L0veZHP]

How do I check which s/w? I have? I have a 2004 ZHP

[az3579]

How do I check which s/w? I have? I have a 2004 ZHP
You don't have it - no sedans came with it.

Sent from my LG V10 on Tapatalk

[cakM3]

BP updated my LCMs so they now blink 5x when I activate them for lane changes. As BP mentioned in the above post sedans did not come with this feature. You have to find an LCM with s/w 4.0 or 4.5 to take advantage of the one touch triple blink feature.


Sent from my iPad using Tapatalk

[derbo]

BP updated my LCMs so they now blink 5x when I activate them for lane changes. As BP mentioned in the above post sedans did not come with this feature. You have to find an LCM with s/w 4.0 or 4.5 to take advantage of the one touch triple blink feature.


Sent from my iPad using Tapatalk

damn 5 blinks?!

[BMWCurves]

damn 5 blinks?!

I can understand it, it's the length I'd prefer if I had that option. I don't think I can make any sort of lane change in 3 blinks except for a motion to exit.

[cakM3]

damn 5 blinks?!

Yes Derek, I now have 5 blinks...


I can understand it, it's the length I'd prefer if I had that option. I don't think I can make any sort of lane change in 3 blinks except for a motion to exit.

With 5 blinks you have just enough to make your lane change intentions known.

[derbo]

Totally understand. My VW has 3 slower blinks. The BMW blinks seem rushed. BP can probably answer, what is the option for 5 blinks since it's not listed on NCSexpert.


-Sent from a fancy smartphone

[cakM3]

Totally understand. My VW has 3 slower blinks. The BMW blinks seem rushed. BP can probably answer, what is the option for 5 blinks since it's not listed on NCSexpert.

Yes, BP can answer since he did the modifications to both of my BMWs....very happy with my current setting :)

[az3579]

I can understand it, it's the length I'd prefer if I had that option. I don't think I can make any sort of lane change in 3 blinks except for a motion to exit.

This. I like 1-2 blinks for the initial notification and the beginning of a lane change, and the remaining 3 to complete the lange change without having to swerve.


Totally understand. My VW has 3 slower blinks. The BMW blinks seem rushed. BP can probably answer, what is the option for 5 blinks since it's not listed on NCSexpert.


-Sent from a fancy smartphone

Terra showed me this neat trick on adding parameters to the DATEN file for the LSZ. Factory options are 1, 2, or 3 blinks, that's it. I added custom parameters for 4, 5, 6, and 7. I remember him telling me 7 is the highest, but I'm not sure if that was tested or not.

I planned on writing up a DIY on how to do it...

[slater]

Terra showed me this neat trick on adding parameters to the DATEN file for the LSZ. Factory options are 1, 2, or 3 blinks, that's it. I added custom parameters for 4, 5, 6, and 7. I remember him telling me 7 is the highest, but I'm not sure if that was tested or not.

I planned on writing up a DIY on how to do it...

very cool. hmmm. i love the 3, where i live it's enough. but 5 sounds good too. :) nice work, guys! :cheers

[Sockethead]

In newer cars with iDrive you can change that feature from the settings menu... pretty convenient. I go back and forth between one blink and three (the only two choices)

[WOLFN8TR]

BP never ceases to Amaze me with his coding skills!!

[cakM3]

BP never ceases to Amaze me with his coding skills!!

+1
[emoji1360]


Sent from my iPhone6S using Tapatalk

[Sockethead]

Yep he coded my car too a couple of years ago... like a good IT guy, he keeps a log of all the changes to each vehicle he does... Thanks again BP!

[L0veZHP]

So I would have to switch the whole LCM, right? I guess it's time add another thing to my endless list of mods.

[cakM3]

So I would have to switch the whole LCM, right? I guess it's time add another thing to my endless list of mods.

You probably have sw vers 3.6 in your LCM so I would assume you will have to change out your LCM... Terra used to reprogram the LCM with sw vers 3.6 into sw vers 4.5 but I don't know if he offers this service anymore.

[derbo]

This. I like 1-2 blinks for the initial notification and the beginning of a lane change, and the remaining 3 to complete the lange change without having to swerve.



Terra showed me this neat trick on adding parameters to the DATEN file for the LSZ. Factory options are 1, 2, or 3 blinks, that's it. I added custom parameters for 4, 5, 6, and 7. I remember him telling me 7 is the highest, but I'm not sure if that was tested or not.

I planned on writing up a DIY on how to do it...

Sounds simple enough. I'll compare the difference between 1,2,3 hex codes later tonight and see if I can edit the DATEN too.


-Sent from a fancy smartphone

[az3579]

BP never ceases to Amaze me with his coding skills!!
Full credit goes to Terra - I didn't know this was possible until he told me (and how to do it).

Sent from my LG V10 on Tapatalk

[cakM3]

Full credit goes to Terra - I didn't know this was possible until he told me (and how to do it).

Yeah, Mirza has done a lot for the E46 community....:respect

[cakM3]

6-Disc CD changer was removed today so that I could install Kevin's Intravee II kit. Now both of my BMWs have Intravee II installed [emoji41]

http://uploads.tapatalk-cdn.com/20160703/4e4115bc7c2e19d5f3bc25e1cdf83f01.jpg

http://uploads.tapatalk-cdn.com/20160703/89c65c9f9e50d7b8334069dad76dfbe0.jpg

http://uploads.tapatalk-cdn.com/20160703/d94cd73617900b809bae9dc826d4ec0a.jpg

http://uploads.tapatalk-cdn.com/20160703/5f164af747945d0898eeb33ccffe2e63.jpg

Absolutely love the integration of this kit to my iPod, thanks again Kevin for this opportunity!! [emoji1360]

If anyone is looking to buy a 6-disc CD changer for their car, hit me up via PM [emoji41]


Sent from my iPhone6S using Tapatalk

[johnrando]

:thumbsup

Sent from my SM-G935V using Tapatalk

[cakM3]

:thumbsup

Next on my list is the Stealth One integration for my M3... I will be doing that probably tomorrow :)

[kakashi169]

Is that the OEM Nav???

How do you like it Charlie?

[cakM3]

Is that the OEM Nav???

How do you like it Charlie?

Daniel, yes it is OEM Nav. I have the same exact setup in my M3 as well. Love having this integration. By far the absolute best iPod integration for our cars [emoji41]


Sent from my iPhone6S using Tapatalk

[WOLFN8TR]

Agreed!

[cakM3]

Updated my Intravee II setup to change my one-touch blink feature of my LCM so that it now has the following settings...

Here are the following settings: Off, 2,3,4,5,6,7,8,9,10, and 11. I now have my blink settings at 6 for my one-touch feature :drevil


It is nice having Intravee II installed in both of my BMWs :thumbsup For those with OEM navigation, this is a very nice addition... I wish they had something like this for my Porsche...

Features:
1) Probably the best iPod interface for the E46 platform
2) Programable buttons
3) Automatic clock setting based on GPS
4) Graphical display of the parking distance control sensors on the nav screen, automatically enabled when you put the car in reverse
5) Automatic folding up of side mirrors, if you have power fold mirrors
6) Data logging of your car when you drop it off at the dealership/shop-- including if it was revved out when cold!
7) Updatable firmware
8) No glitchiness!

[L0veZHP]

What ever happen to the 135i brakes? And CSL trunk??

[az3579]

What ever happen to the 135i brakes? And CSL trunk??
Have you not seen Charlie's new toy that has been taking up all his time and attention??? lol

Sent from my LG V10 on Tapatalk

[cakM3]

What ever happen to the 135i brakes? And CSL trunk??

Just so you know.... I'm still in the process of sourcing the 135i rear calipers from a friend of mine... he has been very busy lately (new baby) so I am patiently waiting for when he will have time so I can come up and buy them from him.... then the project can move forward....


Have you not seen Charlie's new toy that has been taking up all his time and attention??? lol

As Botond alluded..... Porsche 911 turbo happened.... I sorta got derailed from my ZHP project..... ;)

[L0veZHP]

Congratulations on your new car Charlie! I bet it's a blast to own and drive! and I'll be waiting patiently for those new mods! and congratulations to your friend as well on having a baby!

[cakM3]

Congratulations on your new car Charlie! I bet it's a blast to own and drive! and I'll be waiting patiently for those new mods! and congratulations to your friend as well on having a baby!

Botond put it in great perspective what it is like going from the ZHP to my Porsche 997 turbo... He put it in my project thread... I can say my car has exceeded my expectations and I will continue to 'tweak' all of my cars to suit my tastes no matter what anyone else has to say about it ;) Yes, I "own" all three of my cars :thumbsup

[TheFinanceGuy]

:thumbup Just popping in to say great work

[Sockethead]

Updated my Intravee II setup to change my one-touch blink feature of my LCM so that it now has the following settings...

Here are the following settings: Off, 2,3,4,5,6,7,8,9,10, and 11. I now have my blink settings at 6 for my one-touch feature :drevil


It is nice having Intravee II installed in both of my BMWs :thumbsup For those with OEM navigation, this is a very nice addition... I wish they had something like this for my Porsche...

Features:
1) Probably the best iPod interface for the E46 platform
2) Programable buttons
3) Automatic clock setting based on GPS
4) Graphical display of the parking distance control sensors on the nav screen, automatically enabled when you put the car in reverse
5) Automatic folding up of side mirrors, if you have power fold mirrors
6) Data logging of your car when you drop it off at the dealership/shop-- including if it was revved out when cold!
7) Updatable firmware
8) No glitchiness!

Now I'm starting to wish I had nav.... Thanks Charlie :mad

[cakM3]

:thumbup Just popping in to say great work

Thanks Patrick! :)


Now I'm starting to wish I had nav.... Thanks Charlie :mad

Glad to help a brother out Rob! ;) :thumbsup

[cakM3]

Swapped in a new fuel pump relay and plugs today.


Sent from my iPhone6S using Tapatalk

[TheFinanceGuy]

Swapped in a new fuel pump relay and plugs today.


Sent from my iPhone6S using Tapatalk

How did the old ones look? How many miles?

Any reason for the fuel relay?


Sent from my iPhone 6s using Tapatalk

[cakM3]

https://c6.staticflickr.com/6/5589/31229861541_752b954c5d_b.jpg

I kinda like this...

[ELCID86]

That is cool. Monster car! Saw several DW did on FB. I need to try it.

[cakM3]

That is cool. Monster car! Saw several DW did on FB. I need to try it.

Yeah, I saw them as well on FB and found the link. This is pretty cool :thumbsup

Here's the link Shawn :)

https://m.photofunia.com/effects/art-on-the-brick-wall (https://m.photofunia.com/effects/art-on-the-brick-wall)

[330i ZHP]

im glad I shared the site with others - it is cool

[cakM3]

It is Stuart. Thanks for sharing :thumbsup

[330i ZHP]

It is Stuart. Thanks for sharing :thumbsup

I hope all is well

[danewilson77]

Stuart's the man. He shared the site! Thanks Stuart!

Sent by the Pixel XL

[johnrando]

Very cool

Sent from my SM-G935V using Tapatalk

[WOLFN8TR]

That is Cool!

[kakashi169]

I thought there was an update on the rear BBKs =(

Good stuff still!

[cakM3]

I thought there was an update on the rear BBKs =(

Okay Daniel! Here is an update regarding the rear BBK retrofit I talked about so long ago.....

Looks like I will be ordering the BMW Performance rear 135i calipers within the next few weeks along with new rotors...

https://c1.staticflickr.com/1/660/32715651396_d5e5e4e44d_h.jpg

https://c1.staticflickr.com/1/714/32376566750_f2f2f67027_h.jpg

The rotors I decided to order are these....although I will add that BP tried to talk me out of getting these... I happen to like how they look and I'm updating my ZHP so I'm going with this....

https://c1.staticflickr.com/1/693/32376483430_c7633ac981_h.jpg

They will go really nice with the new front rotors I will also be installing on my ZHP...
https://c1.staticflickr.com/1/305/31942366753_b20a48ed01_h.jpg

and the stainless steel brake lines
https://c1.staticflickr.com/3/2950/33952441592_7d2f4f615f_z.jpg

I settled on these as my brembo BBKs on my Porsche and M3 have this brake line attached to them. :drevil


I will still need to source longer steel braided brake lines to attach the new calipers to and have tools necessary to modify the brake dust shield in order to have everything mounted without issues... there will be more to follow...waiting for the weather to warm up so I will be on track to do this come Spring2017.

[johnrando]

Cool!

[cakM3]

Oh and the sedan CSL bootlid install is on the plate for the 2017 season. ZHP getting some luv....


Sent from my iPad using Tapatalk

[BADCLOWN]

I'm looking forward to this update the most since you're spearheading the mod for us, hopefully get this done not long after your write up a review post install

[cakM3]

I'm looking forward to this update the most since you're spearheading the mod for us, hopefully get this done not long after your write up a review post install

Jacob, I know this mod has been long overdue. I'm actually looking forward to getting this started and complete. Should be an interesting project [emoji1360]


Sent from my iPad using Tapatalk

[330i ZHP]

That setup looks cool. Is that $1200ish for the rear? How much total for everything to install. (Not incl labor since you'll install yourself)

[cakM3]

That setup looks cool. Is that $1200ish for the rear? How much total for everything to install. (Not incl labor since you'll install yourself)

Stuart...for me it does not matter how much it will cost as much as this is what should be done. This retrofit can be done cheaper by sourcing used rear 135i calipers from eBay and using standard rear M3 blanks instead of what I am using. I'm sure someone can spend far less compared to what I'm spending to get the same results.

To be perfectly honest, I have not added up the costs to any of my mods otherwise I probably wouldn't have done any of them.


Sent from my iPad using Tapatalk

[derbo]

I hate that the fact that the rear rotors are 328mmx20 vs 325mm on the fronts.

http://forum.e46fanatics.com/showpost.php?p=16009864&postcount=39

motivation :)

[330i ZHP]

Stuart...for me it does not matter how much it will cost as much as this is what should be done. This retrofit can be done cheaper by sourcing used rear 135i calipers from eBay and using standard rear M3 blanks instead of what I am using. I'm sure someone can spend far less compared to what I'm spending to get the same results.

To be perfectly honest, I have not added up the costs to any of my mods otherwise I probably wouldn't have done any of them.


Sent from my iPad using Tapatalk

I wasn't criticizing.

[330i ZHP]

Agreed on not thinking about money spent

[BMWM3186]

Dang, I would love to have that setup it's just too much for me to justify something on something overkill for what I need.

[cakM3]

I wasn't criticizing.

Didn't take it that way Stuart [emoji1360] Going down the modding slope is absolute craziness....I'm sure you can relate [emoji16]

[Sockethead]

To be perfectly honest, I have not added up the costs to any of my mods otherwise I probably wouldn't have done any of them.

I know what you're saying, in the last year, I've spent more on my car than it's worth but we aren't doing it for resale value, are we ;)

[cakM3]

I know what you're saying, in the last year, I've spent more on my car than it's worth but we aren't doing it for resale value, are we ;)

Exactly Rob! We do this for the passion we have in our cars... that's why we do this :thumbsup

[Johnmadd]

Very nice Charlie!

[cakM3]

Very nice Charlie!

Thanks John :)

[kakashi169]

CHARLIE!!!

YESS!!! I can't wait to see the results. Please document this with detailed pictures!!! =D

[cakM3]

CHARLIE!!!

YESS!!! I can't wait to see the results. Please document this with detailed pictures!!! =D

I will Daniel. Sorry I took so damned long! Finishing this is way overdue. Stay tuned my friend! :thumbsup

[johnrando]

Yup, never add up the price of your mods! :biggrin

[WOLFN8TR]

Wow very nice selection Charlie! I've heard nothing but good things about those ECS Rotors. When I need a brake job I will being getting those as well.

https://uploads.tapatalk-cdn.com/20170207/935e2e351a0c1f308ed39fc2e59b1a54.jpg

[anandoc]

Charlie, the rear 2-piece rotors (328 x 20) that you posted the link to, isn't that meant for the M3? Part# 011699ECSKT shows to be compatible with E46 M3...

https://www.ecstuning.com/b-ecs-parts/2-piece-lightweight-rear-brake-rotors-pair-328x20/011699ecskt/

[cakM3]

Charlie, the rear 2-piece rotors (328 x 20) that you posted the link to, isn't that meant for the M3? Part# 011699ECSKT shows to be compatible with E46 M3...

That's right you read that right. To make the rear 135i calipers work with the 330i mounting point you need to use the M3 rotors due to the change in offsets.


Sent from my iPhone using Tapatalk

[anandoc]

That's right you read that right. To make the rear 135i calipers work with the 330i mounting point you need to use the M3 rotors due to the change in offsets.


Sent from my iPhone using Tapatalk

Ah, very cool! Thanks for the info. Look forward to lots of pictures when you actually get around to doing this :)

[cakM3]

Ah, very cool! Thanks for the info. Look forward to lots of pictures when you actually get around to doing this :)

I will have all the items needed to do the retrofit... as soon as Spring hits and the weather gets warmer, that's when I will begin my retrofit with plenty of pics to outline just how I'm going to do this retrofit. :thumbsup

[cakM3]

https://c1.staticflickr.com/1/537/32738743436_3e34f0f023_h.jpg

Rear Performance 135i calipers ordered. I'm moving forward on with this retrofit project...

[anandoc]

Rear Performance 135i calipers ordered. I'm moving forward on with this retrofit project...

:rockon

[Sockethead]

:headbang

[cakM3]

:rockon


:headbang

Thanks guys...yeah, I know it's been a long time and I need to get this done so I can write and post up a DIY for everyone! :thumbsup

[cakM3]

ECS Tuning sent me an email informing me of delays in shipment for my BMW Performance 135i calipers... By Spring, I should have everything lined up to commence the retrofit of these calipers finishing the BMW Performance BBK as it should have been... Looking forward to seeing this complete on my ZHP :thumbsup

[cakM3]

I just picked up my daily ZHP from the dealer for service today and had a new oil level sensor and crankshaft sensor replaced as well as change out my rear diff oil. I was told my car was "clean" and that they couldn't find anything wrong with my ZHP although I know what other areas I will be addressing as the 2017 season comes rollin in ;)

https://c1.staticflickr.com/1/375/32225847453_300fa9cba9_k.jpg

https://c1.staticflickr.com/3/2845/32999300606_b9d036a428_k.jpg

I've said this before and I'll say this again... there's nothing like a freshly cleaned and detailed Imola... absolutely love this look! :drevil

On deck for service will be my M3 once I have the BBKs and new wheels installed :thumbsup

[Sockethead]

Lookin good Charlie. That must of been a good moment when they said they couldn't find anything wrong with it ;)

[johnrando]

Always a good thing to hear

Sent from my SM-G935V using Tapatalk

[holyc0w]

I've said this before and I'll say this again... there's nothing like a freshly cleaned and detailed Imola... absolutely love this look! :drevil


Lookin' good with the winter wheels :thumbsup

[danewilson77]

Lookin' good with the winter wheels :thumbsup
+1

Sent from my Pixel XL using Tapatalk

[cakM3]

Lookin good Charlie. That must of been a good moment when they said they couldn't find anything wrong with it ;)

It was pretty cool Rob but the problem is that I know what issues I still have that needs to be addressed. I was surprised the "tech" working on my car did not see them... nevertheless must be the "OCD thing" I have going on....


Always a good thing to hear

Agreed John :thumbsup


Lookin' good with the winter wheels :thumbsup


+1

Thanks guys! :D :thumbsup

[cakM3]

These arrived in the mail recently...... I know Daniel (kakashi169) has been waiting a long time to see movement on this project! :drevil

Here's a few pics of the new rear calipers that will be going on my ZHP completing my BMW Performance BBK installation...

https://c1.staticflickr.com/4/3766/32562585953_066f0484d7_h.jpg
https://c1.staticflickr.com/3/2886/33336433886_909f7cd90c_h.jpg

as you can see these calipers are genuine Brembo calipers
https://c1.staticflickr.com/1/674/32562585753_b230b52c18_h.jpg

closeup of the outboard side
https://c1.staticflickr.com/1/739/33336433836_00eb2c4cfb_h.jpg

closeup of the inboard side
https://c1.staticflickr.com/1/581/33336433636_909f7cd90c_h.jpg


I have the brake lines and calipers for the project.... all I need are the OEM M3 rotors and that will happen once I upgrade my M3's brakes to Brembo GT BBKs... then I can start looking to finish this project on my ZHP which I plan to do come mid April... looks like everything is on track :thumbsup Just thought I would send a small update on my ZHP...

[rguti153]

These arrived in the mail recently...... I know Daniel (kakashi169) has been waiting a long time to see movement on this project! :drevil

Here's a few pics of the new rear calipers that will be going on my ZHP completing my BMW Performance BBK installation...

https://c1.staticflickr.com/4/3766/32562585953_066f0484d7_h.jpg
https://c1.staticflickr.com/3/2886/33336433886_909f7cd90c_h.jpg

as you can see these calipers are genuine Brembo calipers
https://c1.staticflickr.com/1/674/32562585753_b230b52c18_h.jpg

closeup of the outboard side
https://c1.staticflickr.com/1/739/33336433836_00eb2c4cfb_h.jpg

closeup of the inboard side
https://c1.staticflickr.com/1/581/33336433636_909f7cd90c_h.jpg


I have the brake lines and calipers for the project.... all I need are the OEM M3 rotors and that will happen once I upgrade my M3's brakes to Brembo GT BBKs... then I can start looking to finish this project on my ZHP which I plan to do come mid April... looks like everything is on track :thumbsup Just thought I would send a small update on my ZHP...
Very nice , can't wait too see them on [emoji106]

Sent from my SM-G935V using Tapatalk

[anandoc]

Look forward to the full BBK install on your ZHP!

[WOLFN8TR]

Other BMW owners face when Charlie drives by!

https://uploads.tapatalk-cdn.com/20170311/49ea2cef7211c0f46a3da9880bfb9dc0.jpg

[nextelbuddy]

nice! i didnt know that was you on the FB group but I should have put 2 and 2 together lol.

killer setup! are there adapter plates or pieces you need to mount these on your 330 rear carriers?

[cakM3]

Very nice , can't wait too see them on [emoji106]


Look forward to the full BBK install on your ZHP!

Thanks guys! Yeah, I'm looking forward to getting my BMWP BBK setup complete as well :thumbsup


Other BMW owner's faces when Charlie drives by in either of his BMWs!

https://uploads.tapatalk-cdn.com/20170311/49ea2cef7211c0f46a3da9880bfb9dc0.jpg

Fixed... I really got a laugh from this Gary! Thanks!! :drevil



nice! i didnt know that was you on the FB group but I should have put 2 and 2 together lol.

killer setup! are there adapter plates or pieces you need to mount these on your 330 rear carriers?

Yep, that was me!

The rears you will need,

1. 135i caliper

2. 135i pads

3. OEM M3 rear rotors

4. longer brake lines

5. new 135i dust shield or just modify stock one you already have like below

https://c1.staticflickr.com/4/3854/33337932686_66de4661f1_b.jpg

6. no mod to caliper bracket, or adapter plates

That is it...
https://c1.staticflickr.com/4/3684/33223039592_72801c23e9_b.jpg


Just be sure to mount the new calipers so that the passenger's side 135i caliper will now be mounted on the driver's side (bleeder screw on top) and the driver's side 135i caliper is mounted to the passenger's side (bleeder screw on top). That's all you have to do... just mount them so that the bleeder screw is on top after mounting...

[Sockethead]

Sounds pretty strait forward...

[cakM3]

I've been having issues with my MAF for, what I think, the past year now so I finally ordered a new MAF from FCP Euro a few days ago. I replaced my MAF today before the rain and will find out next week whether or not replacing fuel relays, crank sensor and MAF will resolve the occasional LIMP mode issue I have been seeing from my daily driver...

https://uploads.tapatalk-cdn.com/20170325/55e57b41bbc0d261a79a97076aaab74c.jpg
This is the old problematic sensor...cleaning it did not take care of the issue - long term.


Sent from my iPhone using Tapatalk Pro

[Sockethead]

If you find that your wanting to test with a different throttle body, let me know and I'll ship you my spare.

[cakM3]

If you find that your wanting to test with a different throttle body, let me know and I'll ship you my spare.

Thanks Rob! I also have a spare ZHP throttle body stored in my garage....appreciate your very generous offer my friend! :thumbsup

On another note... looks like I will also be installing a brand new UUC Corsa TSE3 exhaust.

2017 season goals for ZHP:
- finish Performance BBK rear caliper setup
- install new UUC Corsa TSE3 exhaust
- adjust ride height (bring car up ~ 1 inch)
- paint and install my CSL bootlid for sedan

[BADCLOWN]

Interesting that the calipers have to be flipped to opposite sides, didn't realize it was that simple of a process. What length brake lines are recommended?

Also can you use M3 ZCP/CSL rotors?

[cakM3]

Interesting that the calipers have to be flipped to opposite sides, didn't realize it was that simple of a process. What length brake lines are recommended?

Also can you use M3 ZCP/CSL rotors?

Jacob, from the two DIYs I have seenits as simple as that [emoji1417]

Brake lines have to be longer than standard rear ones....I'm guessing if you can source new ones from Rally Road. :drevil

Yes you use M3 rotors [emoji1417]


Sent from my iPhone using Tapatalk Pro

[johnrando]

Nice list.

Sent from my SM-G935V using Tapatalk

[cakM3]

I've been having issues with my MAF for, what I think, the past year now so I finally ordered a new MAF from FCP Euro a few days ago. I replaced my MAF today before the rain and will find out next week whether or not replacing fuel relays, crank sensor and MAF will resolve the occasional LIMP mode issue I have been seeing from my daily driver...

https://uploads.tapatalk-cdn.com/20170325/55e57b41bbc0d261a79a97076aaab74c.jpg
This is the old problematic sensor...cleaning it did not take care of the issue - long term.

I have been running with my new MAF sensor since Saturday and have not had any issues this week. My ZHP has been steady and actually feels like she has much more pull than she had when she had throttle adaptation/cylinder misfire issues which was causing her to go into occasional LIMP modes... looks like these issues have been taken care of :)

[Sockethead]

Awesome news Charlie!
I hate intermittent issues... So hard to track down. It's a good feeling to finally resolve, eh?

[WOLFN8TR]

Sweet!

[TheFinanceGuy]

Glad to hear that issue is behind you. Let the modding schedule resume.

[cakM3]

Awesome news Charlie!
I hate intermittent issues... So hard to track down. It's a good feeling to finally resolve, eh?

It's more like a big relief Rob! Having to wonder whether or not my car will suddenly go into LIMP mode while driving on a bridge during my commute to/from work has been unnerving. I no longer have to worry about these issues and feel great that with Botond's help I have been able to resolve this intermittent issue without going to the dealer.


Sweet!

Thanks Gary! :thumbsup


Glad to hear that issue is behind you. Let the modding schedule resume.

Thanks Patrick! Yeah, that's the plan once the weather improves! We're getting crappy weather up here again.... I will wait a few more weeks before beginning the modding... At least I have everything I will need to finish my BMW Performance rear BBK retrofit :drevil

[johnrando]

Good to hear.

[BADCLOWN]

Gotta hate when you go LIMP

[cakM3]

Gotta hate when you go LIMP

She does!


Sent from my iPhone using Tapatalk Pro

[cakM3]

In a few weeks there should be some movement in my garage regarding BBK installs... weather permitting of course!

In order for me to finish the BMW Performance 135i BBK upgrade to my ZHP, I will have to complete the Brembo GT BBK upgrade to my M3 first.

https://c1.staticflickr.com/1/739/33336433836_7ddda63d2b_o.jpg


https://c1.staticflickr.com/1/674/32562585753_d3d40f1397_o.jpg

It is a process and the retrofit to the ZHP is more involved in that I will have to modify the dust shield which will take some time.

https://c1.staticflickr.com/4/3933/33337932556_05cd3e34c4_o.jpg

I plan to paint the dust shield with rust inhibiting paint like the guy who did this in the photo above...

I also want to detail the process that will be involved since the existing information regarding this retrofit is spotty at best. I would like for others to see that there is an option if they want to stay with OEM BMW parts. :thumbsup

The pictures are there to help remind me what I will have on my ZHP soon :drevil

[cakM3]

Looks like I will have another project to add for both BMWs this summer... Botond discovered some broken wiring insulation in his headlight assembly associated with his HID ballast and texted me the the picture below showing his broken insulation.... :/

https://c1.staticflickr.com/3/2923/34106709485_3f83d21cb1_h.jpg

While working in my garage this evening I thought I would check a few "extra" HID ballasts I had stored and noticed similar cracks in the yellow wiring....
https://c1.staticflickr.com/4/3935/33264142324_2c90fd7099_h.jpg

https://c1.staticflickr.com/3/2922/33264142304_6a41fc49a0_h.jpg

https://c1.staticflickr.com/4/3944/34106685695_a3285ad79f_h.jpg


The reason I'm posting this is because it would not surprise me to see that most of you all have similar issues hiding within your headlight assemblies right now if you're still using your OE headlight assemblies. Just wanted to bring this to your attention. Looks like I will be rewiring my ballasts wiring this summer....

[WOLFN8TR]

WHOA!! :blink

[cakM3]

WHOA!! :blink

Gary, this looks like it may affect all E46 headlight assemblies.... the ones I looked at came from an M3

[anandoc]

This is a serious safety issue in my opinion. Adding this to my list of summer projects as well :(

[cakM3]

This is a serious safety issue in my opinion. Adding this to my list of summer projects as well :(

I totally agree!

[ZHPizza]

This some VW level shit

[cakM3]

This some VW level shit

this part does not worry me the slightest as I am very familiar with wiring repairs... I've done wiring repairs once or twice before ;)

[704sw]

this part does not worry me the slightest as I am very familiar with wiring repairs... I've done wiring repairs once or twice before ;)

Is that all ~22AWG like the rest of the car? I'm cracking open headlights in a month or so, and I imagine I'll need to be prepared. A lot of the insulation in my X3 housings looked like this and needed repairs as well.

[Sockethead]

This affects all BMWs. Our e53 was the same way as well as Kristen's 135

[cakM3]

This affects all BMWs. Our e53 was the same way as well as Kristen's 135

This is unfortunate Rob...


On another note... I have everything I will need to start retrofitting my rear Performance 135i calipers with exception of OEM M3 rotors. That will change once I have completed my Brembo GT BBK upgrade on my M3 [emoji41]

Looks like I will be starting this retrofit in a few weeks :drevil


Sent from my iPhone6S using Tapatalk Pro

[nextelbuddy]

I saw this on mine as well when i retrofitted the FXR bixenon projector bowls. I went ahead and used shrink wrap on all of that wiring as well as the bixenon switch plug for the high beam which is inside the housing. those wires are subject to tons of heat and if 0 moisture as well... recipe for cracked insulation.