I need everyones creativity

[danewilson77]

OK....so I have had these rims for about 2 years. I am really happy with them.....but I hate them at the same time. I am unable to put any BMW roundels in these because of the size. I am going to do something to these roundels, over the holidays. Tell me what you would do to them....

Any help is appreciated. I am at a loss besides painting them and sticking ///M3 stickers on them. I need something fresh...to make it through the winter. Help.....pls.......Shane....come back.......Shane.....oops....

Feel free to PS or just splain. Thanks again.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/enkei_ekm3_bs_ci3_l.jpg

[Marcus-SanDiego]

I say you put a playing card and clothes pin in that sucker.

That's all I've got, DW.

[3ZHP]

OK here is my thought, I just did a quick Google and found this sticky transparent film. "Grafix Ink Jet Adhesive Film, 8-1/2-Inch by 11-Inch, 6-Pack, Clear" Find a picture of the Roundel you want and past it in a word doc. Then mess with dragging the size and printing samples on plane paper. Once you get the size correct, fill up the doc with exact copies and print them on the film. Then it's time to cut and stick.

[Maximus57]

Check with the guys at Bav Auto. I've also seen odd size blank center caps on Ebay. Go to Bav Auto for the Roundel stickers.

[danewilson77]

Thanks so far fellas...

[zhp43867]

So you are against painting them? I agree with Maximus about the roundels.

[danewilson77]

I was thinking of painting them black...then doing something in the center....

[az3579]

What is the size of the caps, anyway?

[danewilson77]

For me to have put a sticker in the middle of the existing roudel...it would have had to be 37mm.....

I need the roundels that Khoa sells in his kits to be about 1-2 mm smaller for a stock roundel to fit.