Different types of Front Lip Spoiler for M-technic II

[mikeyb74]

CS Splitters

http://img.photobucket.com/albums/v76/kpeng/ken%20david/IMG_4168-1s.jpg

Rieger

http://farm3.static.flickr.com/2344/2286045773_cbc3c1b92a_b.jpg

AC Schnitzer

http://www.ac-schnitzer.de/uploads/pics/ACS_E46_action_107_02.jpg

Hamann

http://www.hamann-motorsport.de/typo3temp/pics/46ea5d384b.jpg

Hartge

http://www.hartge.de/e/cmsImages/a_782.jpg

3D Design

http://www.3ddesign.jp/pro_aero_images/pro_aero_E46_FLS01B.jpg

http://www.3ddesign.jp/pro_aero_images/pro_aero_E46_FLS02B.jpg

Garbino

http://www.bitte-mw.com/a0030/a0030_066_02.jpg

http://www.bitte-mw.com/a0030/a0030_066_04.jpg

OEM CF Splitters

http://img382.imageshack.us/img382/9180/andreea1dq8.jpg

[GSEN820]

I have splitters right now. I really want Hamman.

Maybe the Boss can pull some strings for an order.

[danewilson77]

I had a dream about that Hamann Lip.

[bullfrogs_M3]

Still haven't installed it yet :(

http://gallery.me.com/jeremiahconnelly/100015/Teaser/web.jpg

[danewilson77]

Still haven't installed it yet :(

http://gallery.me.com/jeremiahconnelly/100015/Teaser/web.jpg

You got it?

HTC Thunderbolt+TT

[mimalmo]

You forgot the best one.


Arqray

http://i251.photobucket.com/albums/gg283/mimalmo/Cars%20and%20Coffee%20Minneapolis%20May%207%202011/P1130051.jpg?t=1304798259

[Alphatek45]

Still think splitters look the beast.

[DirtyPillows]

i love the 3d design look

[az3579]

You forgot the best one.


Arqray

http://i251.photobucket.com/albums/gg283/mimalmo/Cars%20and%20Coffee%20Minneapolis%20May%207%202011/P1130051.jpg?t=1304798259

"Best" is a touchy subject. :biggrin

[mimalmo]

That's my post. I call 'em as I see 'em.

Now see, if you had your own post of a lip you liked, you could call that "the best one".

High-five.

[danewilson77]

That's my post. I call 'em as I see 'em.

Now see, if you had your own post of a lip you liked, you could call that "the best one".

High-five.

:rofl

[Au2bahn]

I like the OEM CF splitters the best. :-/

[bullfrogs_M3]

DW, i purchased the Hamann lip myself (outside of our mess with someone who won't be named). I just haven't gotten around to repainting my front bumper yet and I won't be putting the lip on until I repaint first.

[danewilson77]

Ok.

HTC Thunderbolt+TT

[Hermes]

Can we make this work? (ACS ///M)

http://m3forum.net/m3forum/image.php?u=76143&type=sigpic&dateline=1246802805

http://www.e90post.com/forums/attachment.php?attachmentid=239451&stc=1&d=1234470666

http://www.e90post.com/forums/attachment.php?attachmentid=239448&stc=1&d=1234470666

http://img2.netcarshow.com/AC_Schnitzer-ACS3_3Series_E46_M3_Sport_2003_800x600_wallpaper_0 2.jpg

http://www.autobahn8.com/AC%20Schnitzer/ACS-E46M3-TYPE4-WHEEL.jpeg

http://inlinethumb60.webshots.com/8443/2700163050029388800S600x600Q85.jpg

I'm guessing yes... (I just think it would look so mean)

[UdubBadger]

that'd be awesome

[mimalmo]

Nope, won't fit unless there is an ACS replica that fits the non-M M3 rep bumper.

[Hermes]

Can't we just get some splitters to make up the shape difference?

http://backgardenco.net/images/E46%20M3%20ACS%20style%20front%20lip%20spoiler%20w ith%20aluminum%20srtuts.jpg

I'm pretty sure they'll fit anyways.

http://i29.photobucket.com/albums/c288/jhermes/ZHP%20Photos/foggyday.jpg


Im gonna try to find out. Will report back

EDIT: splitters will def be needed but it will look more mean than the Hamann setup or the regular ACS one

AC Schnitzer
http://www.ac-schnitzer.de/uploads/pics/ACS_E46_action_107_02.jpg

Hamann
http://www.hamann-motorsport.de/typo3temp/pics/46ea5d384b.jpg

[mimalmo]

Nope, it's more than just a shape difference. The widths are different also.

[Hermes]

Damnit. Gonna have to come up with a new plan then...

New plan: get custom CF splitters made to fit...

[RVAzhp]

Still haven't installed it yet :(

http://gallery.me.com/jeremiahconnelly/100015/Teaser/web.jpg
I'll gladly take this off your hands.


Still think splitters look the beast.
I sort of agree


Damnit. Gonna have to come up with a new plan then...
New plan: get custom CF splitters made to fit...
They sell CF clubsport splitters i have them on my car?

[das boots]

Out of curiosity concerning splitters...and I am just playing the devil's advocate here and I do not intend to ruffle feathers here. Because each have their own preferences. I even don't know if this is the right venue to air out my editorials (This is just me speaking out as a part time so-called journalist). So, some questions....what are the purpose(s) for the splitters for the ZHP? Cosmetics as in aggressive looks? Performance as what they are intended? Wouldn't some unintended consequence(s) of adding either of the full length splitters be counter-productive on making the ZHP look aggressive? Being more regressive? Adding the full length might make it something else ending up like a M Tech 1? One of the main reason for the ZHP being aggressive looking is its two fang splitter look. Right? Instead of making the splitter full length, would it better to make the fangs more aggressive? Fire away.....

[Hermes]

Full lips are to increase downforce on the front of the car and fangs 'split' the airflow so it doesn't just crash into the front end. Personally I'm a fan of the lip under the visible M-Tech II bumper (Hamann/Garbino styles)

[S85FTW]

It is purely a preference thing, I hated the splitter look of the bumper on my car and thought that the smooth lines of an arqray would flow well with the front end as a whole. I am sure on tracks and lowered to appropriate height there will be a noticeable difference. On a day like today where we had 55mph winds and with my coilovers set up I did notice much less air travelling underneath my car than normal, end result, me getting thrashed around much less at highway speeds. Not noticeable under 55mph or on normal everyday driving.

[kayger12]

Out of curiosity concerning splitters...and I am just playing the devil's advocate here and I do not intend to ruffle feathers here. Because each have their own preferences. I even don't know if this is the right venue to air out my editorials (This is just me speaking out as a part time so-called journalist). So, some questions....what are the purpose(s) for the splitters for the ZHP? Cosmetics as in aggressive looks? Performance as what they are intended? Wouldn't some unintended consequence(s) of adding either of the full length splitters be counter-productive on making the ZHP look aggressive? Being more regressive? Adding the full length might make it something else ending up like a M Tech 1? One of the main reason for the ZHP being aggressive looking is its two fang splitter look. Right? Instead of making the splitter full length, would it better to make the fangs more aggressive? Fire away.....

First off, not a fan of devil's advocates for this site. By definition, a devil's advocate is someone who argues a point for the sake of argument, which is not welcome here. I don't believe that you're intention is to argue for the sake of argument, though-- looks more like interest in a splitter and lip discussion, which I think this bunch is capable of maturely and respectfully having.

My .02:

What one person thinks looks aggressive might look totally different to someone else.

I tried splitters on mine and didn't like the look. It was too aggressive for me. It took the visually symmetry out of the bumper for me. I know others here who like the splitter look, and I like the splitter look on certain member's cars, just not mine.

I also like the lip look. I agree that it mellows out the front bumper a little, but I like the balanced look of the lip better.

The one reason I have stayed with the stock look of the mtech II so far is the same reason I've stayed with the Style 135s-- because they are part of what makes a ZHP a ZHP, imo. My personal choice is to preserve that.

I guess like everything else, it boils down to what you think looks good.

I'm sure my black and silver cf roundels make some purists cringe. And that's ok.

I don't mod my car for anyone else's pleasure and wouldn't expect them to mod theirs for mine.

If people are happy with their car, then I'm happy.

[cakM3]

Out of curiosity concerning splitters...and I am just playing the devil's advocate here and I do not intend to ruffle feathers here. Because each have their own preferences. I even don't know if this is the right venue to air out my editorials (This is just me speaking out as a part time so-called journalist). So, some questions....what are the purpose(s) for the splitters for the ZHP? Cosmetics as in aggressive looks? Performance as what they are intended? Wouldn't some unintended consequence(s) of adding either of the full length splitters be counter-productive on making the ZHP look aggressive? Being more regressive? Adding the full length might make it something else ending up like a M Tech 1? One of the main reason for the ZHP being aggressive looking is its two fang splitter look. Right? Instead of making the splitter full length, would it better to make the fangs more aggressive? Fire away.....

For me it comes down to styling/function preferences. If you look at the CSL, they came with carbon fiber splitters. I myself don't care for the look and wanted something that was not only cleaner but more functional. My thought on this is that from a functional point, I would have more downforce if I had a full lip spoiler on my front bumper over having a partial lip like splitters. Enter the Strass front lip spoiler. I liked the carbon fiber accents and that I had a full lip going across my front bumper. Looking at my sig, you see the carbon fiber accent along the top center of my CSL bootlid as well. Both items clearly provide function as well as styling.

As we all know, the ZHP comes with the MTec II bumper with the front bumper having integrated splitters. Now I know there are a lot of people who prefer splitters and feel they provide a more aggressive look and that's okay. I myself can live with it but would rather have a more clean, unbroken appearance on my front bumper. Now enter the Arqray lip spoiler. It has been mentioned why paint the carbon fiber part and not leave it exposed? I just feel with what I have going on with my ZHP, "my" Arqray lip spoiler will look better if I had it painted like the white sedan I inserted a few posts ago. The fact that I will have a full lip spoiler to provide a more uniform look and downforce but also have styling, which is what I am ultimately going for with both my rides.

As I have stated, everyone have their preferences. Some like splitters and there are others who prefer a full lip spoiler. I belong in the second group....guilty as charged :)

[az3579]

Fan of the aggressive look myself. Splitters all the way here... one day.
I always liked the look of the stock bumper because of the look of the splitters. It gave the otherwise "clean" line of 3 series vehicles a more aggressive touch, which IMO the line sorely needed. Short of spending money on an M3, you couldn't get a mean looking 3 series without having to go aftermarket. With the M-Tech II, it all of a sudden has that badass-ness that I think it sorely needed.

The good thing about the M-Tech packages is that there isn't just one; there's a variety. There's something for everyone. Want something cleaner and less aggressive that still looks awesome? M-Tech I. More aggressive? M-Tech II. Anything in between? Aftermarket.

[Go Horns!]

I've left mine stock for now, but I have lusted after the Arqray look for a while now. And I just saw the price Khoalty was selling the Arqray reps for. Very tempting. But right now I'm pouring all my money into a new stereo.

[Sockethead]

How about some good pics of splitters and full lip... I got pics of my CF splitters but won't be home to post them for quite some time.

[cakM3]

Arqray front lip spoiler

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/06cf88a1-b209-4633-ae84-514154ff98c5_zps19eccfb0.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0209_zps401dfa1e.jpg

http://i395.photobucket.com/albums/pp37/macdctr/ZHP/DSC_0202_zpsdb74a79f.jpg

[Hochspannung]

What is there to really choose from for the MtechII? Everyone seems to either get the splitters or the Arqray

[Hermes]

What is there to really choose from for the MtechII? Everyone seems to either get the splitters or the Arqray

There's another thread somewhere with all the choices

[Sockethead]

^^ Wow, that's like a re-design of the front bumper... interesting

[johnrando]

Anyone have a good pic with C/F splitters on?

[Sockethead]

Anyone have a good pic with C/F splitters on?
I will when I get home tonight....

[Hermes]

Here is the other thread:

http://www.zhpmafia.com/forums/showthread.php?5161-Different-types-of-Front-Lip-Spoiler-for-M-technic-II

[Hochspannung]

Thanks Hermes

[danewilson77]

Meeeeeeeeeeeeeeerged Threeeeeeeeeeeeeeeeeeeeeeds....

[kayger12]

Meeeeeeeeeeeeeeerged Threeeeeeeeeeeeeeeeeeeeeeds....

Lol, speedy.

I was merging them and hit the merge button and got this message: "vBulletin Tip #42: Not much would be accomplished by merging this item with itself."

You out-merged me. :)

[danewilson77]

Hehe......Site is being "Bossed" right now.

[midlandtech]

Anyone installed a hamann on their ride? I have one being delivered to me and was curious as to how tough the install was


~Steve
Sent from my iPhone using Tapatalk

[zhp43867]

I want to see the BMW CF splitters on a sedan.

Here's a picture of a replica of the BMW CS splitters on my car, back when I was rocking CF roundels as well.

Just a side note: They were painted matte black with plastic adhesion promoter, a couple coats of black, and then some matte Krylon clear coat and allowed to dry for about a week. Did my grills the same way. 35k miles later and not one chip on the splitters (although I took them off a few k ago), and only a few, very small chips on the grills.

[IMG]http://img36.imageshack.us/img36/2904/p1040965q.jpg (http://imageshack.us/photo/my-images/36/p1040965q.jpg/)

[das boots]

CS makes the sedan look mean.....How was the fitting of the CS splitters? Where did you get them from? Did you have to scour the CF prior to painting with matte black? Thinking of this for my sedan.

[zhp43867]

I think they were bought from Euro/DTM Spec. The fitment was pretty darn good, nothing to complain about. I used three short stubby screws on each splitter, and 3M exterior mounting tape to pull them in close to the bumper. Then I drilled pilot holes in the bumper and screwed them in. They weren't CF, so I can't comment on that, sorry.

http://www.dtm-spec.net/v3/mtech-plastic-club-sport-style-splitters-p-57.html?cPath=58_37_178

[danewilson77]

I think they were bought from Euro/DTM Spec. The fitment was pretty darn good, nothing to complain about. I used three short stubby screws on each splitter, and 3M exterior mounting tape to pull them in close to the bumper. Then I drilled pilot holes in the bumper and screwed them in. They weren't CF, so I can't comment on that, sorry.

http://www.dtm-spec.net/v3/mtech-plastic-club-sport-style-splitters-p-57.html?cPath=58_37_178

My install was the same except I also used beta-link on the edge where my screws are.

HTC Thunderbolt+TT

[nike001]

I think they were bought from Euro/DTM Spec. The fitment was pretty darn good, nothing to complain about. I used three short stubby screws on each splitter, and 3M exterior mounting tape to pull them in close to the bumper. Then I drilled pilot holes in the bumper and screwed them in. They weren't CF, so I can't comment on that, sorry.

http://www.dtm-spec.net/v3/mtech-plastic-club-sport-style-splitters-p-57.html?cPath=58_37_178

Since you took them off, are you interested in selling them? LMK

[das boots]

My install was the same except I also used beta-link on the edge where my screws are.

HTC Thunderbolt+TT

Did you also get yours from dtm-spec? What is beta-link? Can expanding inserts be used instead of screws?

[zhp43867]

I don't know if I even have both of them nike001, but I'll look. If I do, sure. One was ripped off during the median accident last year, but it actually was unscathed. The bumper took the hit.

Dane, beta link? Enlighten me...

[nike001]

I don't know if I even have both of them nike001, but I'll look. If I do, sure. One was ripped off during the median accident last year, but it actually was unscathed. The bumper took the hit.


Okay man, sounds good. Shoot me a PM if you ever find them! :)

EDIT: I was just looking through your threads, and your car looks so much better than mine! It just shines so much more! I'm jelly

[kayger12]

I don't know if I even have both of them nike001, but I'll look. If I do, sure. One was ripped off during the median accident last year, but it actually was unscathed. The bumper took the hit.

Dane, beta link? Enlighten me...

Beta link is the adhesive BMW recommends/uses to attach splitters. Part #83190413384

[das boots]

Beta link is the adhesive BMW recommends/uses to attach splitters. Part #83190413384

Is that 2K feet for $38+ for the adhesive? How many feet are required for the splitter?

[kayger12]

Not sure. When I bought it from Tischer it was a tube of adhesive-- and it wasn't $80. That's the part number I had saved, but maybe I found a different part # for a smaller quantity. :dunno

I passed it on to DW with the splitters.

[danewilson77]

Beta link is the adhesive BMW recommends/uses to attach splitters. Part #83190413384

+1. Thanks KG.

HTC Thunderbolt+TT

[jayjay_dee]

Here's a picture of a replica of the BMW CS splitters on my car, back when I was rocking CF roundels as well.

Just a side note: They were painted matte black with plastic adhesion promoter, a couple coats of black, and then some matte Krylon clear coat and allowed to dry for about a week. Did my grills the same way. 35k miles later and not one chip on the splitters (although I took them off a few k ago), and only a few, very small chips on the grills.

[IMG]http://img36.imageshack.us/img36/2904/p1040965q.jpg (http://imageshack.us/photo/my-images/36/p1040965q.jpg/)

The best!!!

[zhp43867]

Thanks guys, nike001, PMd :)

[oriaj_94]

anyone know where i can get some OEM CF splitters for the mtech II

[danewilson77]

Thanks guys, nike001, PMd :)

Nike001 is not a member here any longer.

Sent from my SCH-I545 using Tapatalk

[Hornung418]

anyone know where i can get some OEM CF splitters for the mtech II

Send me a PM. I can put you in contact with a guy...

Sent from my GS3.

[kakashi169]

Send me a PM. I can put you in contact with a guy...

Sent from my GS3.

That sells the OEM BMW Performance Splitters? Or the OEM mold??

[Hornung418]

The replica based off of the OEM mold. Same fitment. Neither is perfect. Ask johnrando.

Sent from my GS3.

[johnrando]

Get those, as they are the best fit/look you'll find. Not cheap, but worth it. They fit exactly the same as the OEM ones, which actually aren't a perfect fit either.. but it's close enough. Justin, I might need to buy a 2nd set before he stops making them, my car is so low my splitters are taking a beating.

[das boots]

Get those, as they are the best fit/look you'll find. Not cheap, but worth it. They fit exactly the same as the OEM ones, which actually aren't a perfect fit either.. but it's close enough. Justin, I might need to buy a 2nd set before he stops making them, my car is so low my splitters are taking a beating.

I might join in this time for the purchase. Depending on the selling price. Since my OEM splitters and paint are also taking a beating from road debris. No matter if they are high or low. It's as if my splitters are like snow plow but plows for debris.

BTW, are the splitters for sale the wrap around to the fender?

[johnrando]

This is them.

http://i1214.photobucket.com/albums/cc481/johnrando/IMG_20130607_152609_311_zpsc1af2f08.jpg (http://s1214.photobucket.com/user/johnrando/media/IMG_20130607_152609_311_zpsc1af2f08.jpg.html)

[das boots]

Not wrap-around. But they are CF? or ABS plastic that requires to be painted?

[danewilson77]

JR's are genuine CF I believe.

[SoDelBMW]

I have been looking into getting the OEM CF splitters but right now I have the OEM 330ci front bumper on so will they fit or would I have to buy the M-Tech II bumper to make it fit? I couldn't find any OEMs for the regular 330ci bumper.

[Hornung418]

Yes. Must have the M-tech II bumper for proper fitment.

Sent from my GS3.

[328ioc]

If there is the possibility of another group buy I may be interested in a second set as well......just in case you know.

Sent from my SCH-I545 using Tapatalk

[SoDelBMW]

Alright, thanks so would the bumper and splitters from umnizta and khoalty work or is there a better website to find them?

[johnrando]

Mine are OEM c/f, ready to go. I sold my euro ones to Devlin. I've heard decent things about Khoalty's, but the fitment is more off than these (but they cost less). The ones I'm talking about go w/Mtech II.

[SoDelBMW]

Well I found an M-Tech II bumper on umnizta that I will probably will buy but where is the best place to get OEM splitters that fit the best?

[johnrando]

You can't find OEM splitters anymore. The best ones that I've seen on the market are the euro molds that Justin is talking about. You're hard pressed to tell them apart from OEM ones except the don't come with a hold in the bottom (which isn't an issue at all).

[328ioc]

All the other splitters you see online are a totally different style than mine a Randos as well.

Sent from my SCH-I545 using Tapatalk

[SoDelBMW]

You can't find OEM splitters anymore. The best ones that I've seen on the market are the euro molds that Justin is talking about. You're hard pressed to tell them apart from OEM ones except the don't come with a hold in the bottom (which isn't an issue at all).

That sucks! I found a set of splitters on khoalty for 110, would these be the euros you're talking about?

[SoDelBMW]

http://www.khoalty.com/bmw-e46-m-tech-splitters-m-tech-ii-bumper.html

[johnrando]

That sucks! I found a set of splitters on khoalty for 110, would these be the euros you're talking about?

No, the "euro splitters" are ones that are molded from the oem ones that a guy in Euro makes on his own. The Khoalty ones are likely coming over from China or such. The euro ones are around $250.

[SoDelBMW]

http://www.eurodivision.com.au/e46-m-tech-cf-splitters-for-m-tech-front-bumper.html

Would these be the ones or if not then where can I find them? If I can't find them then would the khoalty ones work fine?

[das boots]

http://www.khoalty.com/bmw-e46-m-tech-splitters-m-tech-ii-bumper.html

These are the ones I got but they are OEM and are ABS plastics and painted. They are called the wrap-around. Since they wrap from the fender to the front. If I come upon another set of these OEM, I'll snatch them.

[johnrando]

http://www.eurodivision.com.au/e46-m-tech-cf-splitters-for-m-tech-front-bumper.html

Would these be the ones or if not then where can I find them? If I can't find them then would the khoalty ones work fine?

Couldn't see the pics on that one. The "euro" ones I'm speaking of are not on a website. As I said before, it's just a guy working out of his house type of setup.

[oriaj_94]

If anyone is also intreated in buy you can count me in for a group buy !

[oriaj_94]

Also rando do you have a pic of your entire front end?

[johnrando]

Not the best pic but here's one.

http://i1214.photobucket.com/albums/cc481/johnrando/1938f99b-b0f5-49bc-b8c6-3c77190f86b5_zpsf0a487df.jpg (http://s1214.photobucket.com/user/johnrando/media/1938f99b-b0f5-49bc-b8c6-3c77190f86b5_zpsf0a487df.jpg.html)

[stephenkirsh]

Are convertible headlights/blinkers an all-in-one?

[johnrando]

Yup.

[stephenkirsh]

Ahhhh ok. That's gotta be...logistically annoying? Looks nice though

[ELCID86]

I had a pair of CTD's but I thought them a bit too pointy (similar or the same as Rando's). I never installed them and recently sold them. If i did get another set, I'd go Khoalty.

CTD: http://forum.e46fanatics.com/showthread.php?t=821594

http://img.tapatalk.com/d/14/03/01/u7u7a3ev.jpg

http://img.tapatalk.com/d/14/03/01/u3ude5um.jpg

Thumbs, iPhone, Tapatalk.

[johnrando]

Rando's are OEM, so if they are like his, the fit s/b fine. :)

[das boots]

I had a pair of CTD's but I thought them a bit too pointy (similar or the same as Rando's). I never installed them and recently sold them. If i did get another set, I'd go Khoalty.

CTD: http://forum.e46fanatics.com/showthread.php?t=821594

http://img.tapatalk.com/d/14/03/01/u7u7a3ev.jpg

http://img.tapatalk.com/d/14/03/01/u3ude5um.jpg

Thumbs, iPhone, Tapatalk.

Maybe you should have kept CTD's splitters. His is the closest fitment yet to the OEM. In fact to my understanding, he made his thicker than the OEMs.

[johnrando]

The CTD ones are the Euro ones I've been talking about. I'm going to jump in on that group buy on e46f.c.

[Hornung418]

Yeah he uses five layers of CF compared to OEM BMW two layered splitters.

Sent from my GS3.

[kakashi169]

The CTD ones are the Euro ones I've been talking about. I'm going to jump in on that group buy on e46f.c.

I thought u already own a pair of OEM ones. Why are you buying another set?

OP the euro ones are awesome!

Heres mine.

http://farm8.staticflickr.com/7350/9206588528_80f28340fc_z.jpg

[johnrando]

I do have an OEM pair, but I want a backup just in case. Good c/f splitters won't be around forever. Worst case, I sell them in a few years. Besides, what else is tax refund money for? :biggrin

[ELCID86]

Maybe you should have kept CTD's splitters. His is the closest fitment yet to the OEM. In fact to my understanding, he made his thicker than the OEMs.

Again, too pointy for me. Paid $220, sold for $230.

[SoDelBMW]

Yes that's 3 people let's have a group buy!


Sent from my iPhone using Tapatalk

[das boots]

I'm in as long as it stays $200 max or lower depending on GB.

[SoDelBMW]

Alright we need to get a list started, who's all in on the splitters

1. SoDelBMW(Mason)

[cakM3]

Alright we need to get a list started, who's all in on the splitters

1. SoDelBMW(Mason)

I'm out.....I'm of the Arqray type....:)

[johnrando]

Alright we need to get a list started, who's all in on the splitters

1. SoDelBMW(Mason)
2. johnrando

Already put my name down on e46f.c

[Hermes]

I'm a Garbino fan myself...

[ChrisCSL#25]

I would but I'm expecting delivery of mine from Bimmian tomorrow... Timing is everything!