View Full Version : Angel Eyes wiring help
midlandtech
10-08-2011, 04:26 PM
Hey guys I'm installing some angel eyes on the car this weekend but dont know where to wire it for a constant power. I have thought about wiring them to the foglights or but would like them to be on with the ignition or just with the parking lights. I noticed that i cannot wire them with the corner lights as they would flash with the turn signals. Lemme know what you guys have done with yours.
thanks in advance,
Steve
midlandtech
10-08-2011, 05:03 PM
ok so change of plans does anyone know what wire i need to use in order to wire them into the tail light so that I can simply use the headlight switch to control them.
pleasecorrupt
10-08-2011, 06:49 PM
don't know what brand you opted for, but this diy shows you were to tap in @ ecu. if your kit didn't have splicers just go to home depot for them.
pleasecorrupt
10-08-2011, 10:41 PM
http://www.diymybmw.com/e46/umnitza-predator-orion-v2-angel-eyes/
midlandtech
10-09-2011, 08:18 AM
I did see the wiring option to the ecu but didn't know if it was a general aux or if it was wired to the headlight switch it looks to be just a general aux turned on with the ignition I'm hoping to wire it to the headlight switch
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.