Need valve cover for 04 330ci zhp coupe asap help!!!

[QBAN32]

I was doing my valve cover gasket and my valve cover did not sit flush in the front of the motor over the vanos seals...i tried pushing it down and hitting it lightly and it cracked. The only one i found on the market is from pelican parts and its 231 dollars and it does not look correct...my coil packs are not bolted down they are just pressure fit in...I need one asap I am supposed to drive 600 miles to NC.

I am located in NJ and need one as soon as possible. Call Jared at 908-229-1108. ANY HELP WILL BE APPRECIATED. or email me directly at jaredrubio23@gmail.com2121212021212120

[danewilson77]

$173.00

http://www.ecstuning.com/Search/11127512839/

$180.00

http://www.trademotion.com/partlocator/index.cfm?action=searchCatalogOEM&siteid=214672

$181.00

http://www.ddmtuning.com/search.php

I would choose an above weapon based on how fast they can get it to you. Order this morning....have it overnight shipped, and you could have it tomorrow.

Or......if you want to spend some time to save some money......call these guys...

http://www.bmrparts.com/

And ask how much for a used one with overnight shipping. Tell them you need it by tomorrow.

Hate to even mention this...but......I will.

With the way that crack is...as a temp repair......you may be able to seal that crack with JB Weld.....but do not let any drip into the engine.....let it dry.....then op test it by letting it come up to temp/press..

^Last resort

[QBAN32]

Thank you very much, yeah i didnt want to chance it with JB weld, i called ecs tuning but they are telling me they cant get it to me until early or mid next week. Im going down the list and calling, I appreciate it really.

[danewilson77]

OK...lemme know if you strike out.

[QBAN32]

well ECS tunings time frame takes too long, and so does ddm tuning. getbmwparts.com i placed and order with then just emailed me saying it wasnt in stock after they just said it was...so evan over there is trying to send it out to me tomorrow and said he will overnight it from bmw to him...so im not sure. the bmw salvage place said they wouldnt even sell me one if they had it ha, because they reuse them on good motors with broken valve covers...i just spent 203 with getbmwparts 15 for shipping and 5 for handling plus i snapped a nut/bolt on the front of the valve cover so it was about 3 dollars for that

[danewilson77]

Damn bro. Sometimes when it rains.......

You'll have her right in no time.

HTC Thunderbolt+TT

[QBAN32]

hey if you could show some support too on facebook my company fan page is High Rush Distribution, it has tons of pics of my ZHP with my vinyl wrapped roof, rear spoiler, mirrors, and my dynavin v5...spread the word if you can thank you.

[danewilson77]

What do yous distributes?

[QBAN32]

Its just the name, we sell OEM streetbike parts some new mostly used, and we customize cars