To claim or not to claim? That is the question. ZHP fog and underbody damage content.

[danewilson77]

Not for the faint of heart....

Ugh.

Driving home today.....I was behind a white truck.......who was behind a logging truck. See where this is going? So....logging truck start to dump debris off his truck....and ends up shedding a "knot" outta one of the insides of the tree. I saw the debris start to fly.....nowhere to go.....locked in doing 65mph......I grip the steering wheel tight.....oh boy here it comes........white truck goes right over it.......then......I came along......Boom.

Exterior inspection revealed cracked bumper (underneath), and a busted passenger side fog (The one I replaced only months ago).

I have not inspected the underneath......but will do so here in a little. Pics to follow.....in typical tease fashion.

Even if I had pics now....I would make you wait...hehe.

Brake duct......Nuked.

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_154605.jpg

Reinforcement plate.....wasted.

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_155155.jpg

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_155539.jpg

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_154628.jpg

Control arm dust cap.....vaporized.

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_155520.jpg

Underbody splash shield....smoked.

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_154623.jpg

Fog light and frame......history.

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110506_173311.jpg

I am thinking of making a claim on this. What do you guys think? Deductible is $500.00. It will not happen prior to the meet.

[kayger12]

Certainly looks like you've got more than $500 in damage. I'd make a claim, collect the check, by the parts, DIY, and do the other control arm.

[danewilson77]

Copy.....looking good. Can't diy a new bumper though. Thinking I should get it all done at the shop...as hard as that is to say.

Droid + Tapatalk = FTW!

[kayger12]

Good point. In that case, I would DIY everything but the bumper. You'll end up reimbursing your deductible that way-- and maybe even having a little left over.

[M0nk3y]

What happened Dane?

[pleasecorrupt]

did i miss something, what happened? :\

[Oli77]

Wait what happened? Did I miss something? That's you car Dane right?

[Mtnman]

Dane. Make sure you tell them the object had fallen out of the truck and was tumbling down the highway (if its true of course). If the object was moving, and had just fallen, its a comprehensive claim and ur rates dont go up. I had 3k of damage to my car and it was covered after 500. Fixed in 1.5 weeks. Do it tonight and she'll be all better for the meet. Just stick to ur guns though. It took me 5 calls. I never got mad, and everyone i talked to was nice, just be persistant.


Sent from my DROID2 GLOBAL using Tapatalk

[danewilson77]

Sorry fella's...initial post updated with story. Thought you might have caught it in the "Headlines"

[danewilson77]

Dane. Make sure you tell them the object had fallen out of the truck and was tumbling down the highway (if its true of course). If the object was moving, and had just fallen, its a comprehensive claim and ur rates dont go up. I had 3k of damage to my car and it was covered after 500. Fixed in 1.5 weeks. Do it tonight and she'll be all better for the meet. Just stick to ur guns though. It took me 5 calls. I never got mad, and everyone i talked to was nice, just be persistant.


Sent from my DROID2 GLOBAL using Tapatalk

Were you able to get a rental/loaner?

[pleasecorrupt]

Never drive behind uncovered loads. Too bad white truck blocked your view. If you need something that you happen to find on the west coast (like someone parting out) and need help with getting it over it you let me know.

[danewilson77]

Thanks PC. Actually...I think the truck was up a few cars. No way to see it.

Appreciate the scolding to not drive behind uncovered loads though.

[danewilson77]

Just went on line and filed the claim......I'll keep you guys updated.

[Johnmadd]

Like keith said, if you diy most of it you probably come out with some extra cash. My e30 took that small tree a year ago and after I bought the car back from them I got 1500$, and I used my spare windshield and a little metal bending to come out +1500$. What insurance company you with? You should be glad that these cars have those shields under there or you might not have even made it home. What's so hard with the bumper other than the paint?

[danewilson77]

Nothing.....just the paint...and I have never installed one....

I am with USAA.

[kpro]

If I can install the same bumper for 10 hours, I'm sure you can have it done in a half hour :) Sucks Dane, You'll be happy you made the claim, and they should give you a rental if you decide to let a shop do it. I hope you have time to get it taken care of before you take off for a month. :( Your car will be beautiful again, don't worry!

[danewilson77]

Thanks for the wordsof encouragement Kristen. We'll seewhat happens and how much the give me on the claim.

Droid + Tapatalk = FTW!

[Johnmadd]

Get it painted and ill take care of it for you.

[static667]

That's mighty crappy. But, think of the damage if you handn't had the underbody plate. Your motor may have been toast. You will have this all sorted out and fixed before you know it.

Sent using Tapatalk on my rooted Droid. Wut?

[danewilson77]

Get it painted and ill take care of it for you.

Johnny...you're a bumper whiz?

Droid + Tapatalk = FTW!

[Mtnman]

Yes, dane, i got a rental. I have rental coverage on my insurance. You probably do too. Its pretty standard nowadays....

Sent from my DROID2 GLOBAL using Tapatalk

[danewilson77]

Yeah...I guess now that I think about it...when my car was totalled last year....I think I got a rental for $600 worth? Something like that. Anyways....I think I may do the payout and just diy it, as mentioned. I already have UUC CAB's that need to go in....and I can get the zhp suspension kit for cheap right now. That would leave me with a bunch of spares, as I would mostly just replace the control arms...and maybe FSM/RSM.

I will buy new bumper, have it sprayed, and maybe Johnboy can aide in the install.

The reinforcement plate and splash shield are no brainers.

I think the toughest part will be finding all of the brake duct and wheel liner parts.

Should leave me a bunch left over for a new winshield, and some other stuff that needs handled.

Thanks for the advice guys.

Droid + Tapatalk = FTW!

[danewilson77]

Inspection scheduled for Wednesday. I fixed all the visual stuff last night. You can't tell it happened other than the foglight glass and frame are missing.

[ZSP-Mafia]

Yeah...I guess now that I think about it...when my car was totalled last year....I think I got a rental for $600 worth? Something like that. Anyways....I think I may do the payout and just diy it, as mentioned. I already have UUC CAB's that need to go in....and I can get the zhp suspension kit for cheap right now. That would leave me with a bunch of spares, as I would mostly just replace the control arms...and maybe FSM/RSM.

I will buy new bumper, have it sprayed, and maybe Johnboy can aide in the install.

The reinforcement plate and splash shield are no brainers.

I think the toughest part will be finding all of the brake duct and wheel liner parts.

Should leave me a bunch left over for a new winshield, and some other stuff that needs handled.

Thanks for the advice guys.

Droid + Tapatalk = FTW!

Let me know if you need any help. I've done a few bumper swaps. :)

[danewilson77]

Will do....thanks ZSP

[Johnmadd]

Johnny...you're a bumper whiz?

Droid + Tapatalk = FTW!

I've done my e30 and its simple as unhooking fogs and brake ducts and that stuff, then just two big ass allen head bolts and it just slides forward and off. I've never done it on an e46 but looks just about the exact same. Here is some stuff out of the bentley manual.

http://i1210.photobucket.com/albums/cc407/johnmadd1979/2011-05-07_14-18-27_473.jpg
http://i1210.photobucket.com/albums/cc407/johnmadd1979/2011-05-07_14-18-16_991.jpg
http://i1210.photobucket.com/albums/cc407/johnmadd1979/2011-05-07_14-19-16_423.jpg

Im no whiz but know what to expect, should be a 1 to 3 hour job depending on how fast you can unhook the accessories.

[danewilson77]

Ok..great. you know...we pulled and put back a bumper on my Bosses E39. I bet its close...like you said.

Droid + Tapatalk = FTW!

[mach.schnell]

I think deer are the worst:

879

Note head impact to the right, and legs on the bumper. I hit this thing at 65mph, and it bounced off flying. Had I then driven over it, all the hoses etc. would be ripped so, I'm +1 on the undercover and reinforcement plates of BMW.


(and I did get more $$$ when they totaled it than when I bought it, but of course that didn't cover all the repairs etc... over time).

[danewilson77]

Just so every one understands...I was behind a pickup. The logging truck was several cars in front (that I couldn't see). I do not make it a habit to follow logging trucks.

[Marcus-SanDiego]

Just so every one understands...I was behind a pickup. The logging truck was several cars in front (that I couldn't see). I do not make it a habit to follow logging trucks.

Sure you don't. :biggrin

Sent from my DROIDX using Tapatalk

[danewilson77]

LOL...........you're right. I'm a closet logging truck follower.

[Johnmadd]

That's the cheapest way to get new parts, and its:chuck

[Marcus-SanDiego]

That's the cheapest way to get new parts, and its:chuck

Word.

[danewilson77]

Super bad vibration....2 times today While driving.....

Looks like the piece that has the blue dot next to it below, on the CA is toast. Pieces are starting to come out of the bottom of it.

Thinking about just driving it to the dealer tomorrow morning.....even though the inspection isn't until Wednesday...

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/ControlArm-1.png

[danewilson77]

What does "Klar", and "Trub" mean?

http://www.realoem.com/bmw/showparts.do?model=BL93&mospid=47714&btnr=63_0517&hg=63&fg=15

[Marcus-SanDiego]

Klar=clear
Trub=frosted

[Johnmadd]

Super bad vibration....2 times today While driving.....

Looks like the piece that has the blue dot next to it below, on the CA is toast. Pieces are starting to come out of the bottom of it.

Thinking about just driving it to the dealer tomorrow morning.....even though the inspection isn't until Wednesday...

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/ControlArm-1.png

Ah, that's the inner balljoint. Steering wheel shaking pretty good huh. I think your going to need to replace the whole arm.

[danewilson77]

Part list thus far....not including the bumper or brake duct pieces....

1. E46 ZHP Suspension Upgrade Kit -ES#: 58066 - QTY 1

2. Metal Reinforcement Plate -ES#: 128604 - QTY 1

3. Front Aggregate Protective Plate -ES#: 128606 - QTY 1

4. Fog Lamp Assembly - Driver (Left) -ES#: 173938 - QTY 1 (This is an ///M3 fog)

5. Fog Lamp Assembly - Driver (Right) -ES#: 173939 - QTY 1 (This is an ///M3 fog)

6. Pro 5 R Restore Kit -ES#: 517882 - QTY 1

7. BMW Jack Pad With ECS Adapter Kit - ES#: 251602 - QTY 1

8. BMW Center Cap - ES#: 1843938 - QTY 4

~$1400.00 not including the bumper. Heck...I bet this is a $4000.00 at the shop....easy.

Spencer...lemme know if you're still interested in the shocks....

[Hornung418]

UGH...Dane, should we add you to the maintenance list? That price tag is pretty ridiculous for a piece of dead tree :(

[danewilson77]

No worries. Its gonna be a scary drive to the dealer tomorrow.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/DSC04435.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/DSC04434.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/DSC04437.jpg

[kayger12]

Wow!

Droid X. Tapatalk. Use it.

[danewilson77]

Wow!

Droid X. Tapatalk. Use it.

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/low-is-a-lifestyle-350z_design.png

[mach.schnell]

BMW ball joints are pressed in at the factory and require the entire control arm to be replaced. Meyle has a wishbone with replaceable ball joints which helps reduce cost, but mfg. quality seems to be a crap shoot.


. E46 ZHP Suspension Upgrade Kit -ES#: 58066 - QTY 1 The BMW part number is 33500429577 for this kit, and all the BMW online dealers should have this closeout special.

Since the E46 hit the ten year mark, BMW is dumping all their special kits stock (carbon fiber strut, air box, drilled rotors, suspension kit, and probably a lot more).

These days, "Measure twice cut once" means "check three or four vendors before pushing the paypal button."

Try www.theBMWpartStore.com (http://www.theBMWpartStore.com) - $480 plus free shipping if I read it right.


Free Shipping on orders over $50: Shipping weight must not exceed 20lbs. Body parts such as bumpers, fenders, and hoods are also excluded.


PS: Riding behind lumber trucks should give you practice for tracking.:fingerscrossed

[danewilson77]

PS: Riding behind lumber trucks should give you practice for tracking.:fingerscrossed

OMG.

Thanks for the info. The kit, shown above is that kit, and I can get it for <$499 for the CA's, then off the rest.

UPDATE: I am at enterprise right now. They are putting me in a 2011 jeep Grand Cherokee. The ZHP will be inspected Wednesday with the adjustor, the service advisor, and I present. USAA is depositing the cash into my account after that...hopefully this week.

Droid + Tapatalk = FTW!

[mimalmo]

Nice!

[spencers]

Dane, I PMed you regarding those shocks/struts.

[Marcus-SanDiego]

Sounds good, DW. Sounds as though it should work out nicely.

[az3579]

OMG.

Thanks for the info. The kit, shown above is that kit, and I can get it for <$499 for the CA's, then off the rest.

UPDATE: I am at enterprise right now. They are putting me in a 2011 jeep Grand Cherokee. The ZHP will be inspected Wednesday with the adjustor, the service advisor, and I present. USAA is depositing the cash into my account after that...hopefully this week.

Droid + Tapatalk = FTW!


I'm surprised they're not sticking you into an econobox, seeing as they are paying the bill.

[danewilson77]

I'm surprised they're not sticking you into an econobox, seeing as they are paying the bill.

Its $600 worth regardless.

Droid + Tapatalk = FTW!

[danewilson77]

Dane, I PMed you regarding those shocks/struts.

Replied to....twice.

Droid + Tapatalk = FTW!

[Ryans323i]

Just caught wind of this. Poopy circumstances, but it sounds like things are getting handled. I wish you a quick return of the ZHP and hope you're able to get a nice compensation and get her back to perfection. Maybe that Cherokee you're driving has the optional skid plate they brag about in the commercials, just in case you decide run over anymore pieces of wood. (Tongue in cheek, of course)

[kpro]

Dane, quit following trucks of logs ;) jeeeez!

[danewilson77]

:rofl........kpro.

[danewilson77]

Who's in my spot? Ugh....

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110510_194221.jpg

[Hornung418]

Doesn't look that bad...It's no ZHP...but I like the new Jeep and Chrysler lineup.

[kayger12]

Who's in my spot? Ugh....

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110510_194221.jpg

Blasphemy!

Droid X. Tapatalk. Use it.

[Johnmadd]

Hehe, seen that on my way home from work today and chuckled, you even play where's waldo with the rental.

[az3579]

Dane,
Does that thing have any bawlz?

[danewilson77]

Hehe, seen that on my way home from work today and chuckled, you even play where's waldo with the rental.

You look for my car? Stalker! Hehe......

Droid + Tapatalk = FTW!

[danewilson77]

Dane,
Does that thing have any bawlz?

BP...I can't tell you how excited I am to get my car back.....

Droid + Tapatalk = FTW!

[Johnmadd]

You look for my car? Stalker! Hehe......

Droid + Tapatalk = FTW!

Hehe, my spidey senses do not allow me to not look at bmws.
:GheybeSpider

If you passed mine every day you would look too.:ninja

[danewilson77]

True.......

Droid + Tapatalk = FTW!

[danewilson77]

Suspension kit on hand. Awaiting estimate.....

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_142057.jpg

X6M....2 weeks old....getting trailer hitch mod...lol.

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_142616.jpg

Droid + Tapatalk = FTW!

[spencers]

Woohoo!

[danewilson77]

Woohoo!

Yup....I see no issues with being able to shoot the shocks and hardware to you tomorrow.

Droid + Tapatalk = FTW!

[az3579]

Holy crap, that X6M has to be literally taken apart to pieces just for a trailer hitch!

[billschusteriv]

Dude. I was so bummed when I saw this today. I would definately get a few quotes and make sure what the extent of the damage is and compare dealer and DIY costs.


Were you able to get a rental/loaner?

For me - this would depend on if I have that coverage on my insurance. I don't know if I get a rental for comprehensive or collision or both claims.

[danewilson77]

$1900....that's what USAA is gonna give me. Its low....but double what I can make repairs for.....so......

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_161342-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_161503-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_161648.jpg

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_161654.jpg

Droid + Tapatalk = FTW!

[Marcus-SanDiego]

There you go.

[kayger12]

Win.

Droid X. Tapatalk. Use it.

[az3579]

Why did they give you lower than what it would cost to fix?

[Johnmadd]

Now you can start having some fun.

[danewilson77]

They estimated $120/hr..........and calculated 1.4 shop hours which is bullshit. I haven't drilled down through the paperwork. I just need to fix my car now....I will worry about contesting it....etc....afterwards. I know I have $1900 minimum....and she calculated $180 for the reinforcement plate....which is a $400.00 item....so....

[MrMaico]

Good to see things progressing Dane. I have one of those suspension kits on order. I just couldn't pass up such a good deal even though it doesn't feel like I really need it yet. Not interested in going lower so I plan on using the shocks it comes with and at 86,000 miles I'd think they should make a noticeable difference.

Barry

[danewilson77]

Good to see things progressing Dane. I have one of those suspension kits on order. I just couldn't pass up such a good deal even though it doesn't feel like I really need it yet. Not interested in going lower so I plan on using the shocks it comes with and at 86,000 miles I'd think they should make a noticeable difference.

Barry

It really is a sweet kit.

Droid + Tapatalk = FTW!

[billschusteriv]

Just finished reading thru the thread.

Glad the inspection is done and you are getting some bones. Interested to hear how that breaks down for parts, labor, and paint.

Recently got quote on getting my rear bumper fixed and it was 300 for labor, matls and paint.

[danewilson77]

No pickle fork at Lowes or Home Depot. Getting serious now.....I called Advance and they have one for $9.99. I swear IDK why I didn't just go there first. Got the PB Blaster at Lowes though.....lol.

Droid + Tapatalk = FTW!

[kayger12]

Got mine at Sears.

Droid X. Tapatalk. Use it.

[danewilson77]

Pickle forks procured. Headed home....woot!

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_192646.jpg

Droid + Tapatalk = FTW!

[spencers]

I'm confused, are you DIY'ing the CA's? Why did you visit the dealer?

[danewilson77]

I'm confused, are you DIY'ing the CA's? Why did you visit the dealer?

I had to visit dealer so the insurance adjustor could work up how much to deposit into my checking acct.

Droid + Tapatalk = FTW!

[spencers]

I had to visit dealer so the insurance adjustor could work up how much to deposit into my checking acct.

Ah, that makes sense.

[danewilson77]

Done! Goodnight! O-M-G.

[Marcus-SanDiego]

Dang. You're still awake? Good night, sir!

[az3579]

Pickle forks procured. Headed home....woot!

http://i1015.photobucket.com/albums/af278/nicee46/IMG_20110511_192646.jpg

Droid + Tapatalk = FTW!

Is that the M3 silver trim that I see in this pic??? :shifty

[danewilson77]

That was actually a pretty miserable job. I didn't expect that going in. The few number of bolted fasteners would lead one to believe that it's a simple job (and maybe it is sometimes).....

The outer ball joints (both) were basically welded to the kingpins, and took forever to get out.....Inner ball joints are just a nightmare to tighten properly...

Suspension felt nice....but

Drove it to work this morning......got the "brake" and "DSC" light which is indictive of a car, badly out of alignment.....so I will be getting that done asap.

Thanks for the support.

[billschusteriv]

Sorry to hear the control arm job was tough. Glad to hear you got it apart and back together.

Hearing the prices the adjuster quoted for the parts sounds like she is talking about used (junk yard) part prices - not new.

I liked going to the stealership for alignment - it was only $99, they did it "right", and I got the cool data sheet showing before and after data on the alignment.

[spencers]

That was actually a pretty miserable job. I didn't expect that going in. The few number of bolted fasteners would lead one to believe that it's a simple job (and maybe it is sometimes).....

The outer ball joints (both) were basically welded to the kingpins, and took forever to get out.....Inner ball joints are just a nightmare to tighten properly...

Dang, my control arms weren't that bad when I changed them out. Do you think it could be the suspension that added stress on the components, making it difficult to remove?

[danewilson77]

Dang, my control arms weren't that bad when I changed them out. Do you think it could be the suspension that added stress on the components, making it difficult to remove?

Naaa...everything was loose as a goose. Those beotches were just welded together. I soked em with PB for hours....and still...they required some serious beating. So much so..that one ball came outta the joint. Nasty job....

[Ryans323i]

Glad to hear things are progressing. Definitely don't dilly dally on getting that alignment. Best wishes.

[danewilson77]

Glad to hear things are progressing. Definitely don't dilly dally on getting that alignment. Best wishes.

Thanks Ryan.

Droid + Tapatalk = FTW!

[kayger12]

Good work, DW. I feel your pain. I ended up taking a Dremel with a metal cutting blade to the passenger outer nut on my 325 to get it off.

The control arms on the E36 are even more of a pita imo.

[danewilson77]

Starting an idea thread on the Brake and DSC light. Naaa....I prolly just smacked one of the wheel speed sensors....oops.

Getting the car aligned tomorrow.........again.

[MrMaico]

Did you ever figure out what was up with the lights on Dane?

I just happened to run across this Youtube video. Or did you try something like this when you were fighting with them? Seems almost too easy.


http://www.youtube.com/watch?v=LDsci-izhhc&feature=relmfu

[danewilson77]

Did you ever figure out what was up with the lights on Dane?

I just happened to run across this Youtube video. Or did you try something like this when you were fighting with them? Seems almost too easy.


http://www.youtube.com/watch?v=LDsci-izhhc&feature=relmfu

Light has stayed off for a few hundred miles now???

We wrestled them off...unlike the video...

Droid + Tapatalk = FTW!

[ZHP-FTW]

Man that really blows Dane. Sorry to hear about your car, and hope it all comes together for you..

[Kudos]

I will say that my dsc and brake lights were on when we had that blizzard and i had to drive through 8 inches of unplowed snow.

[danewilson77]

Man that really blows Dane. Sorry to hear about your car, and hope it all comes together for you..

Thanks for the word. I will make out ok....

Droid + Tapatalk = FTW!

[danewilson77]

Update: car couldnot be aligned. They are claiming the coilover is busted and bends in the middle when they grab the tire at 9 and 3. We'll see. I was thinking mabye the hit took out the wheel bearing...idk.

The hits just keep comin. The start to an absolutely wonderful weekend.

Droid + Tapatalk = FTW!

[spencers]

:(

[kpro]

Sorry to hear Dane :( thats pooop

[billschusteriv]

Wow buddy. Hope you can pass this along to the insurance.

[Oli77]

Does it feel all wobbly and loosey goosey?

[danewilson77]

Does it feel all wobbly and loosey goosey?

The front end just doesn't "feel" right. I figured after the new CA's and CAB's...ride would stiffen up. It became better....with bent CA replaced...but still didn't feel right. That's what prompted the alignment. Not sure I believe the guy that the coilover is broken. I still gotta look at it. I would put more money on the FSM. IDK....I will keep you pal's updated. I do know one thing.....this is the last thing I need right now....

Droid + Tapatalk = FTW!

[Johnmadd]

That sucks. I am not getting the bending part though.? Have you pulled on it yourself yet? Wheel bearing or shock mount sound like good ideas. Don't forget, I know of a good alignment shop here that will do your setup custom to your suspension, just sayin, sometimes a dealership wont want to be responsible if in question.

[kayger12]

Sorry to hear, DW.

Now I understand why you wanted to trade problems...

Droid X. Tapatalk. Use it.

[johnrando]

Oh man! We feel for ya.

[danewilson77]

I just inspected it. Guy is full of Baby Marky poopy. Everything is sound....tight...and ready for a test drive in the morning. I may just be feeling the splash shield vibrating. It's one thing I haven't fixed since the smack. Best price I could find was $374.00.....

As for what they were talking about...I have no idea

[kayger12]

Maybe try dropping the splash shield and take her for a good run without it. Sucks playing the elimination game, but that might be the only way you narrow down what you're feeling.

[danewilson77]

Maybe try dropping the splash shield and take her for a good run without it. Sucks playing the elimination game, but that might be the only way you narrow down what you're feeling.

Yeah...I like that idea. Thanks KG.

Droid + Tapatalk = FTW!

[kayger12]

Yeah...I like that idea. Thanks KG.

Droid + Tapatalk = FTW!

Sure thing my friend.

[mdfiasco]

Where are we at on this? Need a hand wrenching on it, let me know.

[danewilson77]

We are at.......no brake and dsc light this weekend..at all.

Brake and dsc light came on this morning. Car drives fine....still....something not 100%. Troubleshooting in progress.

Droid + Tapatalk = FTW!

[mdfiasco]

I was pushed off the road a few weeks ago and did a little underbody scraping at front drivers side. Terrible vibration above 55mph. Replaced LCAB and sway bar endlink on that corner. Cleared up 90% of vibes. A damaged tire was the remaining 10%.

Sounds like that side of the front susp took a decent beating. Enough to throw off your speed/brake sensors.

Maybe rotate tires to diagnose if you see fit.

[danewilson77]

I was pushed off the road a few weeks ago and did a little underbody scraping at front drivers side. Terrible vibration above 55mph. Replaced LCAB and sway bar endlink on that corner. Cleared up 90% of vibes. A damaged tire was the remaining 10%.

Sounds like that side of the front susp took a decent beating. Enough to throw off your speed/brake sensors.

Maybe rotate tires to diagnose if you see fit.

Thanks for the data. I did a front to rear swap on Friday. Endlinks are the ones that came with the FK's. The only think left is tie rod, or shock. I do not think it is the shock.

Droid + Tapatalk = FTW!

[Jon D]

Dane

Don't forget if you find more damage that the insurance did not get you can file an amended claim... and ask for coverage of the item.. i.e. shock.. or mounts

[billschusteriv]

Thanks for keeping us updated DW.

[danewilson77]

Dane

Don't forget if you find more damage that the insurance did not get you can file an amended claim... and ask for coverage of the item.. i.e. shock.. or mounts

I did not know this.....:shifty

[Jon D]

Body shops do it all the time, they get an estimate start repairs, find more problems, call adjuster, get more money to fix new problem.. you will probably need to document what you find, pictures etc.. call your adjuster.

[danewilson77]

Copy. Thanks.

[Acyd]

Glad your car is back up and flying along. Same thing happened to me, well almost the same.

Driving home from work, and some animal (was night, not sure what it was) ran out in front of me. I swerved to the right, and smacked my front passenger tire and bumper corner into the curb. Rashed bumper/rim - bent control arm - bent strut - ect ect. 3000k worth of damage. Paid my 500$ deductible and got my local BMW dealership to repair it. They did a great job, front end looks brand new now. The front passenger side is now tighter in handling than the drivers side, and it drives me nuts.

It really is amazing how much damage you can do with such a little hit. Just glad to have my baby back, with a new bumper. Old one was rock chipped to all hell.

[kayger12]

^^^
Digging the sig

[Acyd]

^^^
Digging the sig

Thanks man. I'm digging you ZHP =)