For Sale (SOLD): 17x8, BMW Style 71 wheels Brand New in Box. ET 20

[danewilson77]

Title says it all. $575.00 local pickup. Probably coouuuuuuuld be shipped.....but....

Inquire with your offer. They have been in ny garage for months, and now the guy is getting rid of his car. Transmission issue (SMG).

He's not positive on the sale....but cash in hand may leave him no choice....

That's where they are currently.....

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04210.jpg

And this is what they look like....

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/BMW-Style-71.jpg

DW Out.

Updated 5/1/11

You know....if no one wants these...I may end up buying......I think they look insane...

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04384.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04385.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04387.jpg

I think this distance my be a bit exaggerated due to the car leaning to passenger side due to being jacked up. I bet it's half that on the ground...

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04389.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04390.jpg

[danewilson77]

These will fit many different models of BMW's. Throw me some offers peeps. Rims are 17x8.

Complete set of wheels to give your car a makeover
Very aggresive fitment for the E46 standard body, but can be pulled off with proper tires & rolling of fenders. Greatly depends on how low your E46 is.
Looking for a new set of wheels? How about a set of 17" Genuine Style 71 2 Piece wheels with center caps for a fraction of the price. This is a perfect replacement set for your curbed, bent up set of wheels or just to bump up your

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/Style2071.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/115214_x800.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/040hh.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/pic.jpg

$695 is what they were going for on ECSTuning. This was 59% off of normal price. They no longer have the 17" rims in stock.

The first reasonable offer will be closely evaluated for sale. Please help me get these out of my garage.

Thanks for looking.

[spencers]

Aghhhhh, I'd pounce but I can't deal with the funky offset.

[danewilson77]

Just gotta roll. And actually..if your car isn't lowered, I don't think it'll rub.

[Mike V]

What's the bottom picture for? Those don't look the same.

[spencers]

Man, I wish. Cant run a different offset or roll fenders and maintain d-stock classing in SCCA. :(

[danewilson77]

Copy...that's what I figured. No worries. They're not mine. Just helping this guy recoupe his money.

[Mtnman]

Where is Bill Shuster? These would be money on his wagon!

[Marcus-SanDiego]

^^ Good call. Bill, come on in, pal. We need you!

[az3579]

My buddy would be interested. It's for an xi though; dunno if it'll fit.
I'll tell him about the rolling; perhaps he'd be willing to do that.

[danewilson77]

Additionally...price above reflects what Luke paid. $499.00, but he had to pay shipping as well.

I will persuade him to take the first offer at $575.00 for local pickup.

Above price edited to reflect what he paid...plus half his shipping. You will never get a OEM BMW rim for that, and probably would be hard pressed to get a set for under $1000.00

[danewilson77]

Sale pending to MDFiasco for $575.00.......

[Hornung418]

Ohhhh, that son-of-a-bitch! He's definitely gotta show them off if he comes through with the sale!

[danewilson77]

He's gonna buy them. Lives in VA Beach. Local pick up.

Perfection.

Winning.

[Hornung418]

CAN'T WAIT.

[MsRN]

If he doesn't buy them, I'll consider them...but with shipping to 53711...

[danewilson77]

Bump......

Assuming the box was 24"x24"x12" and at 30lbs XQTY 4 = ~ $100.00 USPS......just as a heads up MsRN.

Back me up.......State = VA, zip code = 23188

[MsRN]

Dane--

Do I take that to mean the previous sale fell through?

[danewilson77]

It did...as of 5 minutes ago. He is no longer interested...

[MsRN]

Exciting! BTW, what's the offset on the wheels, and are they staggered or square?

[MsRN]

Oh, duh...look at the header, Meesh. Do those even fit a ZHP?

[danewilson77]

Square..........ET20...........17x8............

[danewilson77]

They will fit a stock height zhp. Lowered zhp would require rolling the fender. Tempted to pull one of my tires and throw these on for visual representation. I just don't wanna put any lil scratches in them....

[danewilson77]

Still available..................

[danewilson77]

Bump....

[danewilson77]

You know....if no one wants these...I may end up buying......I think they look insane...

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04384.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04385.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04387.jpg

I think this distance my be a bit exaggerated due to the car leaning to passenger side due to being jacked up. I bet it's half that on the ground...

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04389.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04390.jpg

[Hornung418]

Dane, those are the bees knees! I'd like to see you rock them. These are OEM correct?!

[danewilson77]

Dane, those are the bees knees! I'd like to see you rock them. These are OEM correct?!

Yes......over $2000.00 for the set.....sold here for whatever I said above...

Over $600/rim here....

http://www.realoem.com/bmw/showparts.do?model=DT33&mospid=47584&btnr=36_0407&hg=36&fg=15

[Hornung418]

WOWZERS! If I come into excess cash this summer and these are still available...I'd pick em up as dedicated summers!

[Marcus-SanDiego]

Wow. Those look good on your car, DW.

[az3579]

I always loved Style 71's. I would entertain a trade if he was willing, but I don't think that is going to happen.
When my tires get low on tread, I'd like to pick up a set of 71's. I seriously doubt he/you'd be willing to wait for that, would y'all? Would probably happen by mid-end of summer.

[Marcus-SanDiego]

Whoever of the Imola Mafia puts these on, they are going to be kick ass.

[az3579]

Dane,
Giving it a couple of minutes to think about it, I now know that I definitely want these wheels. My issue is whether they will rub. I already have rolled fenders, and I know that with my Kosei K1s on, it rubs in the back every time I go over a moderate/large bump. The offset on those is much higher than the ET20 of the 71's. Wouldn't this just guarantee a rub? My car is also lowered, as you know, which doesn't help the situation...

I'm going to do some more research. If I find that it doesn't rub, would you guys be willing to accept a promise to buy when the meet comes around? I'd like to pick them up then and pay the cash for it on the spot...

[Marcus-SanDiego]

And, BP, if you do end up buying these at the meet, you most certainly will have to find a way to get them installed while we are there. hehe. Ship your 135s back home. FTW.

[mimalmo]

Dane, put those on your car; they look baller as hell. When there are tires on them and the car is on the ground, the poke won't be as pronounced.

poke>tuck

[Marcus-SanDiego]

Yeah. I would love to see these on a car. It would reveal whether there is going to be a rubbing problem.

[danewilson77]

Damn...you guys drive a hard bargain.

BP...I would take a promise...but I want the option to keep for me should I come into cash.

I honestly love the way they look...but am kind of penny pinchin for the meet.

Idk...we'll see what happens...they do look good. Wish I knew the weight...

Hey...I should weigh one..lol

Droid + Tapatalk = FTW!

[spencers]

Wish I knew the weight...
Hey...I should weigh one..lol


Felgen Katalog says 9,68 kg for the 17x8 ET20 style 71
So, 21.34 lbs

[danewilson77]

Felgen Katalog says 9,68 kg for the 17x8 ET20 style 71
So, 21.34 lbs

That's not too bad....

Droid + Tapatalk = FTW!

[spencers]

That's not too bad....
Much lighter than 24.9 lbs.....

[danewilson77]

Much lighter than 24.9 lbs.....

I thought mine were 23? I'll take your word for it, my man.

Remember...I was the track poser with the CCA emblem...so weight isn't a huge concern of mine.

Droid + Tapatalk = FTW!

[spencers]

You'll definitely feel a difference with a few pounds shed from each corner under normal driving.

[az3579]

Damn...you guys drive a hard bargain.

BP...I would take a promise...but I want the option to keep for me should I come into cash.



Then please consider this the promise to buy them. I am going to probably get rid of the set I have now to fund these, but if I get all of my bills paid off by then, chances are I'll just buy it cash and keep both sets.

Either way, I want to pick these up from you at the meet, definitely, unless you reeeeeeeally want them. I just all of a sudden got the itch for Style 71's when I saw them on an E46 ZSP on the way to Long Island the other day. I'm really itchin' now. lol
Plus, cleaning the 135's is really getting old.

[danewilson77]

BP...it is an aggressive fitment. What will you do to make them fit? Just curious to hear your plan.

[az3579]

Damn, I just made myself look like an idiot. The research I did saying it will fit was for the 47 offset, and I didn't realize that 'till now.

:facepalm

[billschusteriv]

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/115214_x800.jpg


:drool

Shmexyness. I swear you posted that pic to tempt me (and Mikey) Dane. Darn you sir.


Where is Bill Shuster? These would be money on his wagon!


^^ Good call. Bill, come on in, pal. We need you!

Sorry I was out guys - under the weather - when this thread came about. Still reading through what I missed.

I'm wearing through my Ventus V4's (high performance all-seasons?) on 16" Style 45's....

http://www.bimmerwholesale.com/media/BMW-Style-45.jpg

because... I have a set of 17" Style 73's I want to rock as summers and put winters on the 45's.

http://www.bmwtips.com/tipsntricks/wheels/bmw_wheel_073.jpg

[billschusteriv]

Oh... and bump for a good guy and some nice wheels! I saw these wheels in person... still in the box in Dane's garage. Mint.

[Hornung418]

Bill 73s are a real hassle to clean. But they definitely look good when they are ;)

[billschusteriv]

Bill 73s are a real hassle to clean. But they definitely look good when they are ;)

:word I know I'm not going to enjoy cleaning them... but I've always had a soft spot for turbine wheels... especially Alpinas on an e30. Now that its warm, I'm going to try cleaning up the 73s that I picked up and see how they turn out. If they are really trashed and I can't fix them... then I'll look to pick up something else.

[danewilson77]

Price of one wheel, takes all 4 home.

[az3579]

I'm sick and tired of cleaning my 135's. I want 71's so bad. This suuuuuuucks that they're ET20.... :(

[danewilson77]

4 wheel drive mod on your car....and they will fit.

Or just stock ride height.

[danewilson77]

Then please consider this the promise to buy them. I am going to probably get rid of the set I have now to fund these, but if I get all of my bills paid off by then, chances are I'll just buy it cash and keep both sets.

Either way, I want to pick these up from you at the meet, definitely, unless you reeeeeeeally want them. I just all of a sudden got the itch for Style 71's when I saw them on an E46 ZSP on the way to Long Island the other day. I'm really itchin' now. lol
Plus, cleaning the 135's is really getting old.

I thought you promised to buy these at the meet? Better figure out how to raise that whip up bro.

[az3579]

I thought you promised to buy these at the meet? Better figure out how to raise that whip up bro.

Maybe coilovers and an overall break-your-back stiff suspension?? :dunno

I've been looking for the past 2 hours for a set of these for sale in the correct offset, and NOBODY is selling them! All of the ones I found are SOLD or are ridiculously high prices. :mad

So now I'm stuck buying wheels that are the wrong offset. Greeeeeeeat. lol

[danewilson77]

Naaa.......its all good BP. If no one buys....I will end up sporting these....and everyone will be soooo sorry that they passed up the sez that will emanate from my ride. I think I can get them to fit with a simple fender roll.

Droid + Tapatalk = FTW!

[az3579]

Naaa.......its all good BP. If no one buys....I will end up sporting these....and everyone will be soooo sorry that they passed up the sez that will emanate from my ride. I think I can get them to fit with a simple fender roll.

Droid + Tapatalk = FTW!


I think not, sir Wilson. Not without going back to, at a minimum, stock height...
From what I've been reading, the only way to get these to fit with a lowered car is to get some very skinny tires and stretch the hell out of them. I don't know about you, but me no likely the stretch look, and I want some meat on my tires.

If you can live with that, more power to you. I found countless ET20 wheels for sale, but only found two sets of the correct offset within a somewhat reasonable price. One's on eBay, and I sent the guy a message to see if he'd be willing to trade, but I seriously doubt it, so that'll be that.

I may be listing my wheels for sale here soon...

[danewilson77]

Just so that we are all clear and can visualize what these rims would look like with a stock ride height fitment....here goes.

The rims below (on the rear) are 18x9 with an ET35 offset. The rims for sale....in this thread are 17x8 with an ET20 offset.

Thread below provided for verification.

http://forums.bimmerforums.com/forum/showthread.php?t=1648018

Plugging those into the below calculator, yields....you will have a greater clearance on the inner edge...and...the rim will be out from the fender by 2mm's.

http://www.1010tires.com/WheelOffsetCalculator.asp

So....2mm beyond what you see below. I think that's actually pretty nice fitment.

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/Daddysnewwheels018.jpg

[billschusteriv]

On his e46 ZHP touring - 330 ZHP is installing new BBS LMs - 19x10 et20 (reversed faces - they were 19x10 et25) and 19x11 et25.

http://forum.e46fanatics.com/showthread.php?t=522195&highlight=touring&page=68

http://i225.photobucket.com/albums/dd62/smoulton0204/wagon/STU_0066.jpg

He's installed M3 fenders in the front (not sure if rolled/pulled)... and he's rolled and pulled the rear fenders.

Dane/Botond could PM/call 330 ZHP (Stu) if you want to ask him how much work it would take to install.

Pic of 330 ZHP's (Stu's) ZHP touring before installing the LMs....

http://i225.photobucket.com/albums/dd62/smoulton0204/wagon/wagon30.jpg

:drool

[billschusteriv]

And here's a thread with our own Ryans323i discussing some 18x8 ET20 wheels on CarolinaEuros :)

http://forums.carolinaeuros.com/index.php?showtopic=7972

[nk_zhp]

What's the weight of the wheels do you know?

[az3579]

The problem with that, Bill, is that I can't pull my fenders. It's not allowed in STX in auto-x, and I am keeping it in that class for now. :(

[danewilson77]

I don't think a roll or a pull is necessary with stock ride height........

It's only 2mm more....look at all the clearance he has....

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/Daddysnewwheels018.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/Daddysnewwheels020.jpg

[danewilson77]

This says that 18x8 71's weight 21lbs. Maybe 20lbs for the 17's?

http://www.measurespeed.com/bmw-rims-wheel-weight.php

[az3579]

Just found 18" Style 71's on eBay that need refinishing, but are relatively cheap. That's probably gonna go before I get moneyz for it. Plus, bills suck. :(
Perfect size and offset, too... 18x8.5 ET50. :crying

[danewilson77]

Damn bro......good luck. I hope it all works out.

What are they asking?

[Marcus-SanDiego]

http://i1015.photobucket.com/albums/af278/nicee46/Other%20cars/Daddysnewwheels020.jpg

^^ Looks like San Diego. In particular, looks like Mira Mesa. If I am correct, I could probably guess within four blocks of where this is located. Sorry for going OT there. hehe.

[az3579]

Damn bro......good luck. I hope it all works out.

What are they asking?

It doesn't matter, because it's an auction ending in 5 days and I can't afford even the $450 right now. This is always the case; a deal comes along and I can never afford it when the deal is happening. Same thing happened with the BMW strut brace, and soon the intake (though I'm not sure I want that one). This is also going to pass me by and there isn't anything I can do about it. These need to be refinished, so the plan would have been to refinish a wheel at a time until all are done, then mount tires.

[danewilson77]

^^ Looks like San Diego. In particular, looks like Mira Mesa. If I am correct, I could probably guess within four blocks of where this is located. Sorry for going OT there. hehe.

Look at the link and see where he's from Marky. Does it say Cali?

Droid + Tapatalk = FTW!

[Marcus-SanDiego]

Look at the link and see where he's from Marky. Does it say Cali?

Droid + Tapatalk = FTW!

Yep. Says San Diego, too. Nice. I'm guessing mira mesa.


iPad. Tapatalk. Bi-winning.

[danewilson77]

Go figure....The Boss is right............................again.

Droid + Tapatalk = FTW!

[danewilson77]

Bump!

[mimalmo]

Surprised that these haven't sold yet. The low offset and 8" width with a 215 or 205 series tire should fit our cars without any issues.

[danewilson77]

Agree.....idk. if they don't sell soon...I may pick em up....throw 225's on them and be done with it.

Droid + Tapatalk = FTW!

[Marcus-SanDiego]

I may pick em up....throw 225's on them and be done with it.

Droid + Tapatalk = FTW!

That's what you should do.

[az3579]

Surprised that these haven't sold yet. The low offset and 8" width with a 215 or 205 series tire should fit our cars without any issues.

Problem is, that's not a whole lotta rubber... definitely not what our cars were designed for as far as handling is concerned.
I've always preferred the look of nice wide, beefy rubber myself... perhaps Dane likes the skinny tire look. :dunno

[mimalmo]

Then do 225's

[az3579]

Then do 225's

Our buddy Dane is going to be stanced by the end of this. :biggrin

[danewilson77]

Who knows...maybe. Stanced petty well now....compared to most.

Droid + Tapatalk = FTW!

[danewilson77]

To da top.

[mimalmo]

That's it, I'm buying them.

Way to go!

[danewilson77]

Way to go!

Lol....

Droid + Tapatalk = FTW!

[danewilson77]

TTT

[mimalmo]

I'll bid $100

[Johnmadd]

101, BAMM.

[mimalmo]

$150

[Johnmadd]

$150

Knockout,300$

[mimalmo]

$301

[danewilson77]

LOL..............The guy won't come down past $600.00

I asked. Tired of them sitting in my garage. If I had bought them.....I would have made them fit...but I didn't...so I won't.

[willatch]

I'm so interested in taking these off your hands for my newly acquired E46 330xi. I've always loved them and they'd look great. Unfortunately, I'm just west of Albany, NY. Is there any chance you'd ship them? And if so, what would it take.

[danewilson77]

I'm so interested in taking these off your hands for my newly acquired E46 330xi. I've always loved them and they'd look great. Unfortunately, I'm just west of Albany, NY. Is there any chance you'd ship them? And if so, what would it take.

You have already researched the aggressive offset correct?

I think shipping might be $100...but will firm that up. Take your time and read the whole thread.

Better idea: come to the meet (http://www.zhpmafia.com/forums/showthread.php?1079-ZHP-Mafia-Family-Reunion-June-10-2011-thru-June-12-2011-in-Williamsburg-Virginia) and pick em up...hehe.

Droid + Tapatalk = FTW!

[Johnmadd]

If you guys chip in for tires I will test them out on my ride.:drevil

[willatch]

I'm out. As you mentioned, the offset is way too aggressive. They'd be about 40mm further out than my style 98s. These must've come off an e39... Apparently you can find them with offsets compatible with e46s. I'll have to keep looking. Thanks anyway.

[danewilson77]

The offset is juuuuuuuust right.

Droid + Tapatalk = FTW!

[mimalmo]

They're narrow enough (8" width) that they will work fine with stock suspension but will need rolled rear fenders with a drop.

[danewilson77]

Figure they would be the sez on an Xi..........

Droid + Tapatalk = FTW!

[Johnmadd]

B u m p

[danewilson77]

Gracias Senor-a

[SureShot434]

so they would have no problem on my 2001 325i with sport suspension??

[danewilson77]

You will have to roll your fenders. I rolled mine the other day in 30 minutes. You just need a fender roller....or a telephone book oir a bat(hehe).

I think shop cost would be minimal (<$100) to have it done though.


http://www.youtube.com/watch?v=KMp1DphOb9o

[SureShot434]

what is this rolling a fender?

[mimalmo]

You try to flatten that fender lip so it doesn't rub against a tire.

http://www.eastwood.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/p16482f.jpg

[danewilson77]

^Zactly.

[SureShot434]

i want them but first i need to do motor mounts a LCAs, CABs, and front shocks. :(

[DirtyPillows]

If you still have these in 2 weeks you got yourself a buyer. ....drool.... I've been looking for a set of these forever nvr found right one. Almost began to think I should look into m parallel.

[DirtyPillows]

I prob could by them now but then I couldn't make payment for my car then ill have some nice rims and no car to put them on :(

[danewilson77]

If you still have these in 2 weeks you got yourself a buyer. ....drool.... I've been looking for a set of these forever nvr found right one. Almost began to think I should look into m parallel.

Make sure you're savvy on the offset.

HTC Thunderbolt+TT

[DirtyPillows]

I have been reading the previous post and I get that it is wider. I do have stock suspension so from what you guys are saying I should be ok. Am I missing anything????

[DirtyPillows]

Probably only question I have would be do I need to stretch the tires or not

Sent from my DROIDX using Tapatalk

[danewilson77]

I think a fender roll is all that's needed.

HTC Thunderbolt+TT

[DirtyPillows]

Not flaring right?

Sent from my DROIDX using Tapatalk

[danewilson77]

Not flaring right?

Sent from my DROIDX using Tapatalk

No...just a nice flat roll. Are you lowered?

HTC Thunderbolt+TT

[DirtyPillows]

Negative completely stock. Was also wandering what kind of tire setup would I run. What do you think can under my coupè

Sent from my DROIDX using Tapatalk

[danewilson77]

I would just go with 17/225's all around....with this set. Roll it for 30k and if it looks like you got wiggle room...either get spaces with this set or go staggered with next set. Prolly 235 is the most though.

Where are you Located?

HTC Thunderbolt+TT

[DirtyPillows]

Roger. I will keep in touch. If some stuff go my way I can get them sooner but if not definitely 2 weeks.

I am in md 15mins above dc.
Sent from my DROIDX using Tapatalk

[danewilson77]

You going to Bfe?

HTC Thunderbolt+TT

[DirtyPillows]

He'll yea. Well there is like a 1% chance that I might get drag down to Florida but I've been there twice this year so and I've nvr been to bfe before soooo ya ill be there :)

Sent from my DROIDX using Tapatalk

[danewilson77]

I was gonna say....If you Paypal'd the dough....I would bring them to Bfe..........no shipping!

[mimalmo]

I'd run 215's or 205's.

[DirtyPillows]

Hmm 205 seems way to small. Im assuming u like them stretched? I was liking or hoping for somewhere near 235.

About paypal that prob will work and bringing them to bfe would be great too. Unless I decide to roll with them to bfe then I may try get before hand. But for now that sounds awesome.

Sent from my DROIDX using Tapatalk

[danewilson77]

Hmm 205 seems way to small. Im assuming u like them stretched? I was liking or hoping for somewhere near 235.

About paypal that prob will work and bringing them to bfe would be great too. Unless I decide to roll with them to bfe then I may try get before hand. But for now that sounds awesome.

Sent from my DROIDX using Tapatalk

Ok. I'm going to verify....again....the price with the seller.

HTC Thunderbolt+TT

[DirtyPillows]

Roger.

Sent from my DROIDX using Tapatalk

[mimalmo]

Hmm 205 seems way to small. Im assuming u like them stretched? I was liking or hoping for somewhere near 235.

About paypal that prob will work and bringing them to bfe would be great too. Unless I decide to roll with them to bfe then I may try get before hand. But for now that sounds awesome.

Sent from my DROIDX using Tapatalk


Remember, these are 8" wide.

205/40/17 Looks like this on a 17x8 wheel.
http://farm6.static.flickr.com/5068/5666985452_15b033aaab_b.jpg

[danewilson77]

Remember, these are 8" wide.

205/40/17 Looks like this on a 17x8 wheel.
http://farm6.static.flickr.com/5068/5666985452_15b033aaab_b.jpg

Damn that looks good.

HTC Thunderbolt+TT

[Johnmadd]

+1^

Wow, if the roads around herea were smooth and no potholes, or huge dips going into businesses, I would be all over these.

[DirtyPillows]

ya i dnt kn i just feel like that the tire is too small for car like he went cheap and took his tires of an accord not to mention he prob has spacers in there so i prob get away with bigger tires. we'll see first i gotta get those smexy rims for dane :D

[danewilson77]

Ok. I'm going to verify....again....the price with the seller.

HTC Thunderbolt+TT

Price of $575 guaranteed. Said he would rather have a check so papal doesn't eat money.

HTC Thunderbolt+TT

[DirtyPillows]

Hmm well I actually don't have checkbook so is cash fine?

[az3579]

ya i dnt kn i just feel like that the tire is too small for car like he went cheap and took his tires of an accord not to mention he prob has spacers in there so i prob get away with bigger tires. we'll see first i gotta get those smexy rims for dane :D

I agree with this...
Perhaps you'll get away with 225's?

[danewilson77]

Hmm well I actually don't have checkbook so is cash fine?

I think paypal would be better than sending cashola in the mail. I will tell him to suck it up, and stop being a cheap bastid.

[spencers]

Get a money order.

[danewilson77]

Get a money order.

Could do that as well.

[mimalmo]

ya i dnt kn i just feel like that the tire is too small for car like he went cheap and took his tires of an accord not to mention he prob has spacers in there so i prob get away with bigger tires. we'll see first i gotta get those smexy rims for dane :D


I agree with this...
Perhaps you'll get away with 225's?

LOL. You guys do realize that 205mm is slightly larger than 8" - right?

[danewilson77]

LOL. You guys do realize that 205mm is slightly larger than 8" - right?

I have 235's on my 8" rim.

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/IMAG0077.jpg

[mimalmo]

Sam Adams makes me thirsty for beer and it's not even noon.

[danewilson77]

LOL......me too. I have Modelo Especial in the fridge now though.

[danewilson77]

Hmm well I actually don't have checkbook so is cash fine?

Have you decided on how you're going to get rims yet?

[DirtyPillows]

Ill know by friday if I can get them early or if ill wait for bfe

Sent from my DROIDX using Tapatalk

[danewilson77]

ok.....sounds good.

[DirtyPillows]

LOL. You guys do realize that 205mm is slightly larger than 8" - right?


Well I used that link that dane had for fitment 101 that will calculate the whole thing for you and it said 205 were smaller unless I plug number wrong I dnt kn. It said 225 were squared

Sent from my DROIDX using Tapatalk

[danewilson77]

ZSP.......what is your zip code?

HTC Thunderbolt+TT

[DirtyPillows]

Um 20906. Im little ways from ya but not that far that I cant take a trip down if need be

Sent from my DROIDX using Tapatalk

[az3579]

LOL. You guys do realize that 205mm is slightly larger than 8" - right?


As far as money order goes, that's equivalent to cash, isn't it? I'm not well versed with MO's; can they be written out to a certain name and get asked for ID when cashing?

I would go the PayPal route, to be honest. It's the safest way.

[danewilson77]

Um 20906. Im little ways from ya but not that far that I cant take a trip down if need be

Sent from my DROIDX using Tapatalk

How far away are ya?

HTC Thunderbolt+TT

[DirtyPillows]

Well if u lived in the middle of Williamsburg then it be about +/- 4 hr depending on tracffic

Sent from my DROIDX using Tapatalk

[danewilson77]

Well if u lived in the middle of Williamsburg then it be about +/- 4 hr depending on tracffic

Sent from my DROIDX using Tapatalk

Not too bad I guess.

HTC Thunderbolt+TT

[DirtyPillows]

If I have to go down there ill prob take my dads civic so I save those miles and gas

Sent from my DROIDX using Tapatalk

[danewilson77]

If I have to go down there ill prob take my dads civic so I save those miles and gas

Sent from my DROIDX using Tapatalk

K.....lemme know.

HTC Thunderbolt+TT

[az3579]

If I have to go down there ill prob take my dads civic so I save those miles and gas

Sent from my DROIDX using Tapatalk

Why? The ZHP gets pretty much the same mileage...

Sent from my DROIDX using Tapatalk

[danewilson77]

Yeah but he wouldn't put the mileage on his car.

HTC Thunderbolt+TT

[DirtyPillows]

Yeah but he wouldn't put the mileage on his car.

HTC Thunderbolt+TT

Pretty much. I try my best to avoid long trips not that I haven't done it but civics love it when you abuse them they smile and keep on going.

Sent from my DROIDX using Tapatalk

[danewilson77]

I guess mine must be the only ZHP that screams for as many miles that I can humanly put on it... lol
I'll probably have easily 5x the miles Marcus will have on his within 10 years...

Hmmm.

HTC Thunderbolt+TT

[Marcus-SanDiego]

I'll probably have easily 5x the miles Marcus will have on his within 10 years...

I'd be shocked if you didn't.

[az3579]

I'd be shocked if you didn't.

As would I... :rofl



Someone needs to buy this seeeetttttttttt

[spencers]

As far as money order goes, that's equivalent to cash, isn't it? I'm not well versed with MO's; can they be written out to a certain name and get asked for ID when cashing?

I would go the PayPal route, to be honest. It's the safest way.
Paypal is far from safe.
Anywho, money orders are much like checks. Go to a US Post Office or a Wal-Mart and get one.
http://www.usps.com/money/sendingmoney/moneyorders/welcome.htm

[danewilson77]

Paypal is far from safe.
Anywho, money orders are much like checks. Go to a US Post Office or a Wal-Mart and get one.
http://www.usps.com/money/sendingmoney/moneyorders/welcome.htm

I think it's safe if the 2 parties know each other.

[DirtyPillows]

I think it's safe if the 2 parties know each other.

agreed

[danewilson77]

So...with that said........just Paypal me the dough (when you're ready)....and I will shoot it over to him. I talked to him last night....as I changed his oil for him.

nicee46@cox.net

[mimalmo]

Just signed up your email address for free samples of Viagra and Depends.

[danewilson77]

Just signed up your email address for free samples of Viagra and Depends.

LOL.......thanks

[az3579]

:rofl

[DirtyPillows]

Ya so definitely its gonna be like I said before 2 weeks ill make transfer to the acc. And I guess if its not troubling to you ill wait for bfe if you can bring them.

Sent from my DROIDX using Tapatalk

[danewilson77]

Ya so definitely its gonna be like I said before 2 weeks ill make transfer to the acc. And I guess if its not troubling to you ill wait for bfe if you can bring them.

Sent from my DROIDX using Tapatalk

I don't think I can bring to meet. I don't know what I was thinking...but I'm going to have my kids with me.

HTC Thunderbolt+TT

[DirtyPillows]

Haha np ill plan to pick up after I make the payment that will give ne chance to maybe find some rubber and mount them before bfe

Sent from my DROIDX using Tapatalk

[danewilson77]

Haha np ill plan to pick up after I make the payment that will give ne chance to maybe find some rubber and mount them before bfe

Sent from my DROIDX using Tapatalk

Not pushing at all....but wanted to let you know I will be on vacation July 24th through the 30th.

HTC Thunderbolt+TT

[DirtyPillows]

Well I wont have money until 29th because thats when I get paid. So it really not problem I can pick it up on 31

Sent from my DROIDX using Tapatalk

[danewilson77]

Ok. Sounds good.

HTC Thunderbolt+TT

[danewilson77]

Bump

[DirtyPillows]

8 days :D

Sent from my DROIDX using Tapatalk

[danewilson77]

8 days :D

Sent from my DROIDX using Tapatalk

until.....?

[DirtyPillows]

I can pay for rims

Sent from my DROIDX using Tapatalk

[danewilson77]

Do you want me to indictae these are sold?

[DirtyPillows]

Yes im 100% going for them.

Sent from my DROIDX using Tapatalk

[danewilson77]

Roger dodger. Thread updated. These rims are out the door...and outta my garage...soon.

[Marcus-SanDiego]

About time.

[DirtyPillows]

BTW i Pm'ed you but im afraid you have not notice. I wanted to know if you still wanted me to paypal the money or should i bring cash when i pick it up?

And to ask what time should i come around

Thanx :D

[danewilson77]

BTW i Pm'ed you but im afraid you have not notice. I wanted to know if you still wanted me to paypal the money or should i bring cash when i pick it up?

And to ask what time should i come around

Thanx :D

Sorry....should be home around 5:00 pm. Paypal is fine.

HTC Thunderbolt+TT

[danewilson77]

DP.....what in the world? How have we let you off the hook so long with no installed pics? What is going on? I can never....

[mimalmo]

What the fudge! Where's the pictars?

[DirtyPillows]

Haha in due time my friends I need to get some things straighten out with the car first then I can make it look good

Sent from my Droid using Tapatalk