Several ZHP and 330i partouts- many parts available!

[squashman702]

Located in Stow, MA.

I've purchased a bunch of ZHP sedans and a few other late model 330i's in the past several months and have a lot of parts available. I'll add a partial list of the stuff I have- if you need anything, please PM me! Willing to ship smaller items and have done freight shipments in the past for larger stuff. My ebay username is squashman702- I have a lot of parts listed on there as well!

ZHP specific:
-Sapphire black sedan front bumper- $200
-Auto DME, TCM, EWS, key, door lock set- $180
-6 speed DME, EWS, key, door lock set- $280
-3.38 diff, 165k miles- $300
-Black door panels, sedan, no speakers- $200
-Sapphire black trunk lip- $80
-Various ZHP trim bits (A/B/C pillars, etc)- ask.
-MK60 ABS swap "kits" (from ZHP, not M3)- $450/each


Non-ZHP specific:

-Black convertible door panels from leather interior- $200/all
-Black leather rear convertible seat- $150
-Natural Brown convertible front seats- $150
-Natural Brown convertible front door panels- $150
-Ti silver driver fender, coupe/vert- $80
-Alpine white driver fender, coupe/vert- $80
-ZHP exhausts (2 available)- $150/each

Latest part out vehicles:
August 2023: 2003 Black sapphire sedan on black leather, 6 speed. 194k miles, hit front and rear.
July 2023: 2005 Ti silver vert on black leather, auto. 174k, suspected blown head gasket.
March 2023: 2004 Black sapphire ZHP sedan on black leather, 6 speed, 201k miles. Rusty.
February 2023: 2005 White ZHP convertible on black leather, auto, 165k miles. Hit front and rear.
November 2022: 2006 Black sapphire ZHP convertible on natural brown, auto, 155k miles. Hit in front.

[LAZHP]

Don't see it listed on this thread, but are you by chance selling the UUC exhaust or the alcantara steering wheel from the recent one in the classifieds section? Shipping cost to me may not be efficient for the exhaust but definitely interested in it.

[squashman702]

Don't see it listed on this thread, but are you by chance selling the UUC exhaust or the alcantara steering wheel from the recent one in the classifieds section? Shipping cost to me may not be efficient for the exhaust but definitely interested in it.

The alcantara wheel was removed before I got the car, and the exhaust is sold.

[Ocho_Zhp]

Hey Dave, how is the condition of the alcantara shift boots and ebrake boots?

[E46Fan]

PM sent, looking for right side mirror motor

[BADCLOWN]

Pics of black cube trim please

[JPMo]

Are the 6sp swaps still available?

[squashman702]

Pics of black cube trim please

Cube trim is sold, sorry. First post updated.


Are the 6sp swaps still available?

The 196k mile swap is still available, PM me if you're interested. The 171k mile swap sold last night.

[Dunkmastaflex]

PM’d


Sent from my iPhone using Tapatalk

[squashman702]

OP updated, parted out a 155k mile 2006 ZHP convertible recently. Sapphire black on natural brown.

[RUS_ZHP]

@GeorgeH,
Dave listed a several zhp and he may have parts you're looking for.

Sent from my SM-G960U using Tapatalk

[CPHES]

Do you happen to have the springs for that Vert?

[squashman702]

Do you happen to have the springs for that Vert?

I just got in another 165k mile vert, haven't started to part it out yet. The 155k mile springs are gone.

[GeorgeH]

Dave,
I'm looking for upper b-pillar trim, do you have any available? *Sedan

-George

[squashman702]

Dave,
I'm looking for upper b-pillar trim, do you have any available? *Sedan

-George

Not at this point, sorry!

[Galapolis]

Do you have any pics of the vert and its parts? My buddy recently bought a vert and might be interested in a few parts.

[BMWCurves]

Any coupe/convertible tail lights available?

[squashman702]

Do you have any pics of the vert and its parts? My buddy recently bought a vert and might be interested in a few parts.

I have some convertible stuff remaining- no shells. What parts is he looking for specifically?


Any coupe/convertible tail lights available?

I have one set of convertible tails.

[Galapolis]

I have some convertible stuff remaining- no shells. What parts is he looking for specifically?

Front bumper
Rear bumper
Side skirts
Front seats
Rear seats
Door cards
Carpet
Dashboard
Instrument cluster
Headlights

[squashman702]

Front bumper
Rear bumper
Side skirts
Front seats
Rear seats
Door cards
Carpet
Dashboard
Instrument cluster
Headlights

I have some vert seats in black and in natural brown, one headlight, and door cards in black and natural brown. Shipping may be a killer if he's not from the northeast.

[Galapolis]

If you had a full interior he'd probably drive up north and swap it on the spot. Shipping just seats/door cards definitely makes less sense. Thanks.

[squashman702]

If you had a full interior he'd probably drive up north and swap it on the spot. Shipping just seats/door cards definitely makes less sense. Thanks.

Got it. I just have certain pieces left, so that probably wouldn't be ideal for him at this point.

[Jackson3320]

hello do you have the trunk and bumper for zhp?

[squashman702]

hello do you have the trunk and bumper for zhp?

I have a rear ZHP bumper off a convertible in Ti silver, and the trunk lid off the same car.

[squashman702]

Adding a 2003 ZHP sedan to the list. Black on black leather, 194k miles, 6 speed. Car was hit front and rear, and was pretty rusty otherwise. Everything is currently available.

[GeorgeH]

Still looking for a set up black upper b-pillars... :biggrin

[///Mark_D]

Looking for a set of sedan gloss shadowline mirrors with heat/memory. Would need to be the old style though with wires, and not ribbon cables.

EDIT: Looks like the build date would have to be prior to 03/2003 to still have the hardwired mirrors, non ribbon cable.

[WilNJ]

Adding a 2003 ZHP sedan to the list. Black on black leather, 194k miles, 6 speed. Car was hit front and rear, and was pretty rusty otherwise. Everything is currently available.

Dave -

Manual or power seats? Heat? Any cracks starting in the leather?

[squashman702]

Still looking for a set up black upper b-pillars... :biggrin

I don't have any good B pillars at the moment- the latest car I bought had the fabric removed already.


Looking for a set of sedan gloss shadowline mirrors with heat/memory. Would need to be the old style though with wires, and not ribbon cables.

EDIT: Looks like the build date would have to be prior to 03/2003 to still have the hardwired mirrors, non ribbon cable.

VIN decoder shows it was built 7/29/2003. VIN is WBAEV53493KM05072.



Dave -

Manual or power seats? Heat? Any cracks starting in the leather?

Seats are pretty trashed.

[///Mark_D]

VIN decoder shows it was built 7/29/2003. VIN is WBAEV53493KM05072.



Thanks for checking, looks like it would have the ribbon cable mirrors so I'll have to keep searching.

[squashman702]

Thanks for checking, looks like it would have the ribbon cable mirrors so I'll have to keep searching.

Sounds good- I'll verify when I pull them.

[TXRedDevil]

Dave,

Looking for:

- chrome kidney grills (clips must be intact)
- alarm system w/ brackets and nuts/bolts
- driver's side turn signal housing (rubber gasket must be in above avg shape)

Let me know if you have these. Thanks!

[squashman702]

Dave,

Looking for:

- chrome kidney grills (clips must be intact)
- alarm system w/ brackets and nuts/bolts
- driver's side turn signal housing (rubber gasket must be in above avg shape)

Let me know if you have these. Thanks!

I think I may have a turn signal somewhere- I don't have an alarm or chrome kidneys.

[TXRedDevil]

Hi Dave,

I found the above parts yesterday. Thanks for looking.

By chance do you have a black intact center console? My ashtray louver fins are 1/2 gone and the lid's arm is busted on one side.

[squashman702]

Hi Dave,

I found the above parts yesterday. Thanks for looking.

By chance do you have a black intact center console? My ashtray louver fins are 1/2 gone and the lid's arm is busted on one side.

All of the consoles I have at the moment are in rough shape.

[GeorgeH]

I don't have any good B pillars at the moment- the latest car I bought had the fabric removed already.


That is perfectly fine, all I need is the black slider part. How much shipped to 78613 for the pair?

[GeorgeH]

With that said if you have more in similar condition, with the fabric peeling, I'll take every single one you have.

[///Mark_D]

Bit of an odd request. I'm hoping you have a junk ZHP sedan bumper laying around that you could remove one of the lower mounting tabs. Just need the left hand side lower tab that fills the gap between the bumper and the lower inner fender (pork chop). Both tabs are broken off on my bumper, and I have the RH side as pictured below, but the LH side is missing.

These small mounting tabs are normally melt welded as part of the bumper assembly, so there is no individual part number. It would need to be cut free from the main part of the bumper severing the small mounting tabs where it is attached to the bumper.

Do you (or anyone else) have a junk bumper laying around that you could harvest this part from it for me? Need the left hand side only.

Thanks!

http://www.zhpmafia.com/forums/attachment.php?attachmentid=39951&d=1693271670


http://www.zhpmafia.com/forums/attachment.php?attachmentid=39952&d=1693271700


http://www.zhpmafia.com/forums/attachment.php?attachmentid=39954&d=1693271719


http://www.zhpmafia.com/forums/attachment.php?attachmentid=39953&d=1693271710

[squashman702]

Bit of an odd request. I'm hoping you have a junk ZHP sedan bumper laying around that you could remove one of the lower mounting tabs. Just need the left hand side lower tab that fills the gap between the bumper and the lower inner fender (pork chop). Both tabs are broken off on my bumper, and I have the RH side as pictured below, but the LH side is missing.

These small mounting tabs are normally melt welded as part of the bumper assembly, so there is no individual part number. It would need to be cut free from the main part of the bumper severing the small mounting tabs where it is attached to the bumper.

Do you (or anyone else) have a junk bumper laying around that you could harvest this part from it for me? Need the left hand side only.

Thanks!

http://www.zhpmafia.com/forums/attachment.php?attachmentid=39951&d=1693271670


http://www.zhpmafia.com/forums/attachment.php?attachmentid=39952&d=1693271700


http://www.zhpmafia.com/forums/attachment.php?attachmentid=39954&d=1693271719


http://www.zhpmafia.com/forums/attachment.php?attachmentid=39953&d=1693271710

I'll take a look- I might have it on the car I just bought, although it took a decent hit in the front.

[GeorgeH]

Dave, did you see my post asking about the b-pillars? I don't need them with fabric, I only really need just the black slider.

[squashman702]

I'll take a look- I might have it on the car I just bought, although it took a decent hit in the front.

Neither of the bumpers I have still have this piece on it.


Dave, did you see my post asking about the b-pillars? I don't need them with fabric, I only really need just the black slider.

I have a pair I just pulled yesterday, send me a PM.

[///Mark_D]

Neither of the bumpers I have still have this piece on it.

Thanks for checking, I appreciate you taking a look.

[imola red zhp]

Do you have any stock ZHP Suspension Springs front and rear?

[squashman702]

Do you have any stock ZHP Suspension Springs front and rear?

I do, they're higher mileage however. I should have a pair around 185k and one around 200k. Send me a PM if you're interested.

[ENDL3SS00]

Hi, do you have any front seat heating element and wiring? Also looking for a headlight washer retrofit parts and rear strut tower insulation that aren't ripped for sedan.

[squashman702]

Hi, do you have any front seat heating element and wiring? Also looking for a headlight washer retrofit parts and rear strut tower insulation that aren't ripped for sedan.

I don't have any of that stuff at the moment, sorry.