PDA

View Full Version : Max Negative Camber Right Front Side



myles330
09-02-2022, 06:54 PM
Hi All -

A shop told me I have max negative camber on the right front tire. I had the shocks replaced with bilsteins, these are the pictures from the shock tower, that right side looks off to me. Any ideas on what caused this? Not Sure if the shock just needs repositioned or what suspension component could be causing such a symptom.

39262

t.er
09-03-2022, 08:45 AM
Did the shop do an alignment after getting them replaced? You can adjust camber by loosening the 3 tophat nuts and sliding in/out with the car in the air

Sent from my SM-G781W using Tapatalk

Galapolis
09-03-2022, 08:52 AM
Here's a video on how to use the camber tool on our cars.


https://www.youtube.com/watch?v=-qoKjbSVFVg

sillieidiot
09-04-2022, 04:52 PM
Just needs an alignment. They will loosen and pull it back towards the outside of the car to get it to the correct spec.

Fried_Chicken
09-06-2022, 02:11 PM
I have the same problem. I'm at max camber on the left side, but it's matched with the right side.

This happened after I replaced my front struts. I'm not sure how best to proceed, if anyone has any clues.