2 Style 135 Wheels - 18x8 - ET 43

[TrKy3]

Hi All, I have two extra style 135s.
They are a bit more aggressive than the standard fronts on the ZHPs.
They are OE, and were refinished not too long ago.

They are 9+/10 condition. One had a crack on the inside that was repaired.
Ended up using two of these for the fronts on my ZHP, and kept the standard 18x8.5 et. 50 rears.
More aggressive look up front (4mm - 43 vs. 47).

I am looking for $600 obo.
Also, have a set of square snow tires I can throw in for $300 (full set) that have a ton of tread left.

Located in Westchester, NY. PM me if interested.

[JJR4884]

Too bad BMW didn't make these in 8.5s. ET43 would be perfect for those who want to fill the gap in the rear and not worry about rubbing if the car is lowered. My car is lowered a tad and still rubbed with 10mm spacers and (as you know I think you responded to my fb post) there are no options for sub 10mm spacers as hub centric is not an option.

Def a nice option for the front but I think i'm going 10mm since these cars have a lot more to work with in the front.

[TrKy3]

Yeah I used two on my current ZHP (front looks much better), and kept the rears stock.

These have sold.