jason89i
08-28-2021, 04:44 PM
SOLD
Car is in south eastern Wisconsin. (Lake Geneva).
Time to sell one of my zhp’s. Lots of work after purchasing 3 years ago. And it is embarrassing that I have driven it less than 1000 miles. It was intended to be a dual purpose car, but life got in the way.
https://janesville.craigslist.org/cto/d/williams-bay-2003-bmw-330i-zhp-ts2/7386178135.html
2003 BMW 330i ZHP
ESS TS2+ TWIN SCREW SUPERCHARGER
ENGINE -
79mm pulley (8.5 lbs. boost)
Bosch big green injectors
All new pulley bearings, belts, gaskets, fluids, etc.
New laminova core o-rings
Catless headers.
DRIVETRAIN –
UUC lightweight flywheel / kevlar clutch.
UUC dssr (double sheer selector rod.)
UUC short shift kit.
New transmission / diff seals.
New axles (automatic) with new abs sensors.
SUSPENSION -
ICS street coil overs from bimmerworld.
removed...... stock ZHP sway bars installed.
Subframe reinforced, plates, bolt through, etc.
REV SHIFT subframe bushings.
UUC diff bushings.
TURNER adjustable camber arms.
SPHERICAL rear trailing arm bushing upgrade.
All new control arm bushings. Some upgraded to m3 spec sphericals.
BRAKES -
BRASS caliper guides
BIMMERWORLD wheel studs
Stainless brake lines
new track brake pads.
OTHER -
Projector lamp upgrade.
P3 VENT GAUGE (with boost display.)
NEW TIRES on refinished style 135’s.
Window tint on driver side is foggy.
Refinished a,b,c pillars
Car is in south eastern Wisconsin. (Lake Geneva).
Time to sell one of my zhp’s. Lots of work after purchasing 3 years ago. And it is embarrassing that I have driven it less than 1000 miles. It was intended to be a dual purpose car, but life got in the way.
https://janesville.craigslist.org/cto/d/williams-bay-2003-bmw-330i-zhp-ts2/7386178135.html
2003 BMW 330i ZHP
ESS TS2+ TWIN SCREW SUPERCHARGER
ENGINE -
79mm pulley (8.5 lbs. boost)
Bosch big green injectors
All new pulley bearings, belts, gaskets, fluids, etc.
New laminova core o-rings
Catless headers.
DRIVETRAIN –
UUC lightweight flywheel / kevlar clutch.
UUC dssr (double sheer selector rod.)
UUC short shift kit.
New transmission / diff seals.
New axles (automatic) with new abs sensors.
SUSPENSION -
ICS street coil overs from bimmerworld.
removed...... stock ZHP sway bars installed.
Subframe reinforced, plates, bolt through, etc.
REV SHIFT subframe bushings.
UUC diff bushings.
TURNER adjustable camber arms.
SPHERICAL rear trailing arm bushing upgrade.
All new control arm bushings. Some upgraded to m3 spec sphericals.
BRAKES -
BRASS caliper guides
BIMMERWORLD wheel studs
Stainless brake lines
new track brake pads.
OTHER -
Projector lamp upgrade.
P3 VENT GAUGE (with boost display.)
NEW TIRES on refinished style 135’s.
Window tint on driver side is foggy.
Refinished a,b,c pillars