AM1GO
07-04-2021, 09:56 AM
So you have an issue with your oil dipstick stuck? This might be because you have an updated Cold version Oil Dipstick Tube (#11437565437). Reason is the new tube does not have a centering “guide” tube at the end and welds end up catching on the plastics of the dipstick making it hard to pull out.
One minute of your time to modify your dipstick and problem solved forever. Use a box cutter to cut finned piece and slide it up about 1 1/4 inch up the dipstick. Look at picks for reference.
https://uploads.tapatalk-cdn.com/20210704/610a0a5085cecb1b6776f67525376801.jpg
https://uploads.tapatalk-cdn.com/20210704/2df5b06cf918b15913eb6e485d78a114.jpg
Sent from my iPhone using Tapatalk
One minute of your time to modify your dipstick and problem solved forever. Use a box cutter to cut finned piece and slide it up about 1 1/4 inch up the dipstick. Look at picks for reference.
https://uploads.tapatalk-cdn.com/20210704/610a0a5085cecb1b6776f67525376801.jpg
https://uploads.tapatalk-cdn.com/20210704/2df5b06cf918b15913eb6e485d78a114.jpg
Sent from my iPhone using Tapatalk