Missing hardware to attach bellypan

[usinjin]

My car has been without some bottom front trim pieces for a while due to an accident and them never being replaced. Now I'm getting a new bumper cover installed as well as the plastic belly pan (p/n 51718268344). Turns out there's missing hardware that the pan needs to attach to..I THINK it's the left and right mounting brackets p/n 51717894722 and 51717894721. I'm also missing the brake ducts. But HOLY COW why is the right duct alone $350??? That's outrageous. Can I do without those? Does anyone know for sure if they're required for mounting the belly pan? Any help is greatly appreciated.

[ZHPizza]

Don't need the ducts to mount the belly pan bro just the plastic brackets

[Galapolis]

You can get the right duct for $81 here: https://www.ebay.com/itm/324332804638

[usinjin]

Don't need the ducts to mount the belly pan bro just the plastic brackets

Good to know.. I'm not ordering those expensive plastic...things!


You can get the right duct for $81 here: https://www.ebay.com/itm/324332804638

I've got a sedan.

[Galapolis]

I've got a sedan.

It's the same part.

[usinjin]

It's the same part.

Wait..is it? realoem has a different part number for the sedan. Also the ends look a bit different. Maybe that doesn't matter?

38172

[Archbid]

This is why the lord gave us the pick n pull

[usinjin]

Very, very few e46's at any of the yards in my area. None have been ZHP's that have this particular duct, and they've very, very long been stripped of everything. I ended up skipping both.

[Archbid]

Ah yes. ZHP ducts are only going to come from a pro breaker.