PDA

View Full Version : WTB - Schwaben Strut Spring Compressor



Johnd
03-12-2021, 03:39 PM
I will be swapping out my front struts and need to purchase a spring compressor. Looking to save a few bucks buying a used one..

Thanks

cakM3
03-12-2021, 04:00 PM
I will be swapping out my front struts and need to purchase a spring compressor. Looking to save a few bucks buying a used one..

Thanks

the Spring Compressor is not too expensive...

https://www.ecstuning.com/b-schwaben-parts/schwaben-coil-spring-compressor/013892sch01a/

https://live.staticflickr.com/65535/51030545726_83ea4e1a83_h.jpg

I just purchased this tonight for my upcoming coilover install for my ZHP...

san
03-12-2021, 05:22 PM
I will be swapping out my front struts and need to purchase a spring compressor. Looking to save a few bucks buying a used one..

Thanks

You can rent one from auto zone for free


Sent from my iPhone using Tapatalk

cakM3
03-12-2021, 06:14 PM
You can rent one from auto zone for free

Good call San. :thumbsup I forgot about renting from Auto Zone.

John in VA
03-12-2021, 06:37 PM
Advance Auto Parts also rents them.

Johnd
03-13-2021, 06:21 AM
I was hoping to find one like this https://www.ecstuning.com/b-schwaben-parts/schwaben-strut-spring-compressor-set/013845sch01a~sch/?gclid=EAIaIQobChMIrOWpkrWt7wIVkf_jBx3noQH4EAQYCSA BEgJ15fD_BwE the ones with the two poles make me nervous as I had one break years ago

Unamused
03-13-2021, 06:25 AM
If you have a second car or a ride, easiest thing to do is take off the front struts and run down to your local Tuffy, Pep Boys etc.. My local mechanic swapped my springs and installed all new parts for $40 labor only. In and out in 20 minutes.

BMWCurves
03-14-2021, 07:29 AM
If you have a second car or a ride, easiest thing to do is take off the front struts and run down to your local Tuffy, Pep Boys etc.. My local mechanic swapped my springs and installed all new parts for $40 labor only. In and out in 20 minutes.

I've never done this, but that is a great thought. I've done two sets of struts and I am always so nervous about these home tools.

cakM3
03-14-2021, 07:36 AM
I've never done this, but that is a great thought. I've done two sets of struts and I am always so nervous about these home tools.

I also have installed coilovers on a few cars using this type of spring compressor tool without any issue. I'm more in the mindset of having my own spring compressor tool even though I won't be using this tool too much but at least I will know the actual condition of my tool rather than having to rent them... besides, these tools aren't expensive. :thumbsup

Johnd
03-16-2021, 06:12 AM
I found the one I wanted on ebay - the guy had it listed for $150 and took $125.. So I should have the suspension and brakes installed next week