FS: M56 Valve Cover with Harness and Dipstick

[Archbid]

Sold

I have an M56 cover with a gasket set, breather hose, oil cap, coil harness, and dipstick. The cap on the CCV 100% intact.

$300 for the set. No beauty cover (I have it listed for $330 on eBay)

+$30 for six coils

37249

37250

[ApexHitter]

Does it include everything such as the beauty cover, air distribution rail and coilpacks?

[Archbid]

Does it include everything such as the beauty cover, air distribution rail and coilpacks?

It does not include the beauty cover and coilpacks, though I can sell the coilpacks for $75

I am pretty sure there is no such thing as a M56 air distribution rail. The M56 intake has the rail welded to it, and it does not detach. If you know otherwise and can send a part number I would greatly appreciate!

Includes valve cover with intact cap and diaphragm, breather hose, gasket, dipstick tube and dipstick, and coil harness.

[ZHPizza]

Yep the air distribution rail is permanently mounted to the intake manifold, so you can't swap it over. You also do not need to change the coil packs on a zhp. It's pretty simple:

Swap the valve cover
Run a hose to the distribution rail
Cap the rear port on the distribution rail
Cap the port on the dipstick tube (or replace the entire tube with the M56 version)
Rip out all that CCV trash that's been a pain in the ass for 20 years

There's a handful of us that have done the swap so you can just start a thread to discuss it specifically for the ZHP. The e46f threads get clogged up with wiring/coil pack issues on the prefacelift cars that we don't have to deal with.

[Archbid]

Sold the first one. Got another - this one has the breather hose and valve cover gasket

[Archbid]

Got another one. LMK!

[Archbid]

Got another one. LMK!