View Full Version : IAT "Dead plug" part number
Archbid
10-23-2019, 05:14 PM
In late 2003 and on models, there is no air temp sensor in the intake manifold, but there is a hole. Anyone know the part number for the plug.
I already checked realoem and they show an actual sensor for later cars, but this is incorrect as there is no pigtail.
Fried_Chicken
10-23-2019, 06:13 PM
If nobody here can help you, you might want to try the nearest BMW dealership. They will rip you off a million percent, but it should be so cheap it doens't matter.
Overboost
10-23-2019, 06:51 PM
Assuming this is the plug for the hole you need I have looked and looked and can't find any plug or cap available. Maybe some of the engine gurus here have come across this before.
35852
Archbid
10-24-2019, 01:24 PM
Assuming this is the plug for the hole you need I have looked and looked and can't find any plug or cap available. Maybe some of the engine gurus here have come across this before.
35852
That's the one!
Overboost
10-24-2019, 02:09 PM
As much searching we have done with no results, I wonder if this plug was ever available? Would it be possible to get one off a decent used manifold?
Archbid
10-30-2019, 06:06 AM
Found it! Part number 11617521836, Blind Plug
Looks like:
https://e46fanatics.com/forum/attachment.php?attachmentid=787017&stc=1&d=1572393779
And available for the princely sum of $6.50 at FCP:
https://www.fcpeuro.com/products/bmw-blind-plug-11617521836
(cross-posted at e46fanatics.com)
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.