View Full Version : Tow Hook Plate Mount
JETSET303
08-01-2019, 03:38 PM
Looking for a tow hook plate mount that sits relatively flush (within an inch or so) of the front bumper. All that I have seen sit pretty far way and the 2 I tried off amazon did too. Suggestions are appreciated.
Sent from my iPhone using Tapatalk
John in VA
08-01-2019, 05:17 PM
There's only a few that everyone uses - what have you tried that you don't like?
RUS_ZHP
08-01-2019, 05:51 PM
There's only a few that everyone uses - what have you tried that you don't like?I bought one bracket from Amazon for ~$30. It was e46 specific, but that sh....t didn't work at all. It was flimsy as well.
So, I returned it and settled on gominigo bracket. I like it.
Sent from my SM-G900V using Tapatalk
John in VA
08-01-2019, 05:58 PM
http://www.usmillworks.com/bmw_front_license_plate_mount_bracket_tow_hook.htm l is a common solution.
JETSET303
08-01-2019, 07:55 PM
There's only a few that everyone uses - what have you tried that you don't like?
It sticks out from the bumper by 4+ inches and looks silly IMO.
Sent from my iPhone using Tapatalk
JETSET303
08-01-2019, 07:58 PM
http://www.usmillworks.com/bmw_front_license_plate_mount_bracket_tow_hook.htm l is a common solution.
That looks much better than what I have. Will look at that more closely when I’m back on grid Monday. Thanks.
Sent from my iPhone using Tapatalk
ComradeNick
08-02-2019, 08:33 AM
That looks much better than what I have. Will look at that more closely when I’m back on grid Monday. Thanks.
Sent from my iPhone using TapatalkYeah this about as good as it gets
https://uploads.tapatalk-cdn.com/20190802/82ae23c14ebc4f4e81c1c85d900583e4.jpg
Sent from my SM-G973U using Tapatalk
johnrando
08-02-2019, 02:56 PM
Usmillworks for sure. Gominigo next.
Sent from my SM-G955U using Tapatalk
BMWCurves
08-08-2019, 08:25 AM
Usmillworks for sure. Gominigo next.
Sent from my SM-G955U using Tapatalk
Yup. This is what I had compiled a few years ago: http://www.zhpmafia.com/forums/showthread.php?20112-Front-Bumper-Tow-Hook-License-Plate-Bracket-Available-Options
holyc0w
08-08-2019, 10:11 AM
It sticks out from the bumper by 4+ inches and looks silly IMO.
That seems way off. Is it the M3 version?
JETSET303
08-08-2019, 11:29 AM
Yeah this about as good as it gets
https://uploads.tapatalk-cdn.com/20190802/82ae23c14ebc4f4e81c1c85d900583e4.jpg
Sent from my SM-G973U using Tapatalk
That is the USMillworks unit?
Sent from my iPhone using Tapatalk
JETSET303
08-08-2019, 11:34 AM
That seems way off. Is it the M3 version?
The description did not indicate that it was.
Sent from my iPhone using Tapatalk
ComradeNick
08-08-2019, 12:50 PM
That is the USMillworks unit?
Sent from my iPhone using TapatalkYup
Sent from my SM-G973U using Tapatalk
JETSET303
08-08-2019, 03:01 PM
Yup
Sent from my SM-G973U using Tapatalk
That looks good. The ones I got off amazon were ridiculous
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.