Front end car bra

[BADCLOWN]

Anyone have one they use/recommend? Additionally, anyone heard of or used these before? I’m looking to get one for my ZHP for road trips

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F17 2692876320

[Aethir30]

I'm not personally a fan. I would prefer to get a Clear bra put on. Lots of types out there and shop to do it. Xpel clear vinyl is probably the most popular right now.

Sent from my Pixel 2 XL using Tapatalk

[BADCLOWN]

I’m not looking for a permanent cover, just something to slap on for a road trip

[Prestovie]

Never used one but I've heard that they can do more damage than good, what with debris getting underneath and being ground into your paint

[johnrando]

They can hurt your paint if you don't put it on correctly (flaps in the wind, something gets under it)... but they do work. I recommend a good coat of wax before you put it on, and as you said, just use for road trips, don't keep it on all the time. Def take off if rained on. My issus is that the regular 330 one is not a fit for the zhp mtech2 bumper.

Sent from my SM-G955U using Tapatalk

[BADCLOWN]

I was kind of hoping the standard bumper cover (as linked above) would manage to fit our bumpers in some way. That sucks

Or even something like this:

MIDWEST CORVETTE Camaro NoviStretch Front Bra High Tech Stretch Mask Fits: All 5th Gen 2010 Through 2015 Camaros https://www.amazon.com/dp/B0169IHCHA/ref=cm_sw_r_cp_api_i_m91iDbAZSPHQX

[John in VA]

You could try 3M Paint Defender Spray Film: https://frontstreet.media/2018/07/13/does-3m-paint-defender-spray-film-really-work/
https://www.autogeek.net/3m-paint-defender-spray-film.html

[sillieidiot]

You could try 3M Paint Defender Spray Film: https://frontstreet.media/2018/07/13/does-3m-paint-defender-spray-film-really-work/
https://www.autogeek.net/3m-paint-defender-spray-film.html

I have used something like that. I did the Road Warrior Plus one. It does work. However, it's a pain to take off without a pressure washer. Even with a pressure washer, there are some pieces left that you have to scratch off. I left an edge so that it would be easy to peel, still took forever. If I ever do it again, I'll painters tape it first, then coat it lol

[johnrando]

The basic 330 one that fits the hood for sure and kinda some of the front, so you would get partial coverage. But, it doesn't cover the lower bumper part at all.

Sent from my SM-G955U using Tapatalk