(Sold): Auto e46 LCM with the latest software pre-installed for triple-blink, etc.

[zhphd]

Comes with the latest software version 4.7. Ready to code to enable functionality such as triple blink. Pulled from a 2005 325i.

$75 obo shipped anywhere in the CONUS.

https://uploads.tapatalk-cdn.com/20190422/cdf8ba89db1502ba9c2e5813b8615105.jpg

https://uploads.tapatalk-cdn.com/20190422/14b4d459266e7b07c8e57f55b2c5f01b.jpg

[Showda711]

What is triple blink?

[ELCID86]

What is triple blink?

Tap the blinker stalk and you get three turn indicators (blinks). I like it, some want more, some less. It can be adjusted with the right software.

I need to list my euro fog faceplate that would pair well with this.

[nextelbuddy]

Tap the blinker stalk and you get three turn indicators (blinks). I like it, some want more, some less. It can be adjusted with the right software.

I need to list my euro fog faceplate that would pair well with this.

how much PM me :)

[zhphd]

I am also interested in the Euro face plate if it has the auto function lol.

[Vas]

I need to list my euro fog faceplate that would pair well with this.

I totally forgot you had this stored for me. Let's touch base

[ELCID86]

how much PM me :)

Let me sort this out with Vas.


I totally forgot you had this stored for me. Let's touch base

I do and forgot you wanted it when you were here.

[zhphd]

$90 obo shipped anywhere in CONUS

[GotZHP]

$90 obo shipped anywhere in CONUS

I'm pretty interested. Will you program before it is shipped? Also, does it have any other features that can be programmed besides the triple blink?

[zhphd]

I'm pretty interested. Will you program before it is shipped? Also, does it have any other features that can be programmed besides the triple blink?

You'll have to do the programming with NCS Expert once you install it depending on which feature you want. At the very least, you'll also have to follow these steps in order to get rid of the tamper dot after installation:



Open NCS Expert
Load your VO/FA from your AKMB module (not your ALSZ since it's blank)
Do an FA_WRITE job on your ALSZ module,
Do an FGNR_SCHRIEBEN job as well.
Now load a blank FSW_PSW file and do the SG_CODIEREN job.

I don't know how to do this over a distance :( Triple blink worked right away when I tested this on my car. However if you have auto-leveling, this may not work with your car. As far as I know, you can program up to 7 blinks, activate rear fogs (when used with a Euro faceplate), and modify daytime running lights. Not sure if there is more, but probably is.

[az3579]

That I'm aware of:

LCM v4.0+ only features:
* Rear daytime running lights
* One-touch multi-blink turn signals (can be customized to number of blinks)

LCM v4.7 only features:
* Lights switch off on driver's door opening (key out of ignition), even if light switch is in a position other than Auto or Off.

Any of the other popular coding options can be coded on any LCM installed in a ZHP (assuming it's factory equipment).

[zhphd]

^ Thanks for the clarification. This will come in handy!

[zhphd]

Bump

[zhphd]

$80 shipped!

[zhphd]

$75 obo shipped!

[zhphd]

bump

[zhphd]

bump

[Dual]

Not sure if there is more, but probably is. Proportional brake lights: more LED's with more pedal force

[az3579]

Proportional brake lights: more LED's with more pedal forceThis is called Brake Force Display, and this is standard on all LCMs that ZHPs came equipped with.

The lights aren't exactly proportional; stage 2 triggers at a certain threshold of brake force and stage 3 triggers at ABS. There are multiple light modes that can be set, such as the extra lights at Stage 2 (should be enabled from the factory) as well as flashing brake lights (requires coding).

Sent from my Pixel 3 using Tapatalk

[zhphd]

Sold

[johnrando]

Congrats

Sent from my SM-G955U using Tapatalk