What did you do for your ZHP/BMW today?

[Crickett]

Adjusted my clutch stop up now that I don't have to have it nearly on the floor to start the car!

[lilcdkey]

OEM Homelink for $40 shipped! woohoo! Now, I just need the OEM bluetooth.

[GMATT]

Installed new side marker lights (Botond, they do come off like you thought, just need a little extra "help") Got my new brake pads, installing tomorrow night!

[danewilson77]

Installed new side marker lights (Botond, they do come off like you thought, just need a little extra "help") Got my new brake pads, installing tomorrow night!

Well done!

[HokieZHP]

New belts, rear trailing arm bushings, installed SSK, new front Conti DWS tires, alignment, and new fuel filter.

[danewilson77]

New belts, rear trailing arm bushings, installed SSK, new front Conti DWS tires, alignment, and new fuel filter.

How did those RTAB's go?

[Alphatek45]

How did those RTAB's go?

Curious as well. What kind did you go with?

[HokieZHP]

I just went with some stock replacements. I had my mechanic help me with them but they weren't too bad.

[danewilson77]

I just went with some stock replacements. I had my mechanic help me with them but they weren't too bad.

How was install?

[cakM3]

Purchased new splash shields (driver's and passenger's side) to replace my worn/broken ones. Also got UUC Stainless steel braded brake lines and Super Blue brake fluid for the ZHP :thumbsup

[az3579]

Yesterday I quickly wiped down the car with Meguiar's Quick Detailer and applied a coat of Rejex to 3/4 of the car. I got sick and tired of doing it so I'm hoping to finish the rest today...

[cakM3]

Yesterday I quickly wiped down the car with Meguiar's Quick Detailer and applied a coat of Rejex to 3/4 of the car. I got sick and tired of doing it so I'm hoping to finish the rest today...

wax on... wax off young grasshopper :biggrin

[jvr826]

Installed two sets of Performance Friction PFC-01 brake pads, flush/bleed fluid, mounted new Direzza Star Specs on the track wheels (245/40/17), and new Powerflex FCABs. Headed to Buttonwillow for the long weekend to thrash the ZHP in the scorching summer heat.

Swapped a BM53 radio module to test my phantom no-sound issues with my stereo... no fixie. Next!

Applied some clear adhesive sealant to my kidney grilles and reinstalled... will stop them rattling for a while I hope. Cheap-ass Bimmian junk!

[HokieZHP]

Bought a new left foglight molding since I noticed mine was missing

[zhpnsnv]

Installed new side marker lights (Botond, they do come off like you thought, just need a little extra "help") Got my new brake pads, installing tomorrow night!

Put yer rotors on the right way!!!

Today I had my wheels refinished AGAIN because a shop gouged my newly refinished wheels two weeks ago. This time it was free and the color looks to have even more "hyper" to its silver, which I love. Reminds me of current M wheels in hue.

Took it to a body shop to have a look at the front end paint work that's needed. Got a basic quote and opinion. Will keep shopping/looking.


Sent from my iPhone using Tapatalk

[danewilson77]

Put yer rotors on the right way!!!

Today I had my wheels refinished AGAIN because a shop gouged my newly refinished wheels two weeks ago. This time it was free and the color looks to have even more "hyper" to its silver, which I love. Reminds me of current M wheels in hue.

Took it to a body shop to have a look at the front end paint work that's needed. Got a basic quote and opinion. Will keep shopping/looking.


Sent from my iPhone using Tapatalk

Thanks for the update Marc.

HTC Thunderbolt+TT

[cakM3]

Researched factory options for my ZHP and passed along info for others to do this for their bimmers...:thumbsup

[GMATT]

New Pads installed,(thanks Smilez) and rotors clearly marked L and R and still put on wrong side of car by PO............. reinstalled and pads bedded.......Nice!

[Audi 0000]

I am a new ZHP owner (3 weeks now), and I have to start somewhere. So today I installed black kidneys, clear sides, and clear corners. It turned out nice. Full suspension, and red-clear-red tails are next on the very long list.
http://i300.photobucket.com/albums/nn32/REDGTIMK4/gti/023.jpg
http://i300.photobucket.com/albums/nn32/REDGTIMK4/gti/025.jpg

[lilcdkey]

I am a new ZHP owner (3 weeks now), and I have to start somewhere. So today I installed black kidneys, clear sides, and clear corners. It turned out nice. Full suspension, and red-clear-red tails are next on the very long list.
http://i300.photobucket.com/albums/nn32/REDGTIMK4/gti/023.jpg
http://i300.photobucket.com/albums/nn32/REDGTIMK4/gti/025.jpg

Looks awesome!

I just hit 49,000 miles today :(

[Marcus-SanDiego]

Looks good, Audi.

[midlandtech]

Awesome! Pics or it didn't happen. :biggrin


BlackBerry. Tapatalk.

sorry took so long

[Marcus-SanDiego]

:thumbsup

[zhpnsnv]

Wash, wax, quick detail on the interior and on engine. Found lots of swirls for next polishing. Also took pics of new wheel finish. They're definitely closer to the new M wheel finish than stock BMW.

http://tapatalk.com/mu/43535d96-b68d-9618.jpg
http://tapatalk.com/mu/43535d96-b69e-c3f4.jpg
http://tapatalk.com/mu/43535d96-b6af-5654.jpg
http://tapatalk.com/mu/43535d96-b6bf-ee80.jpg


Sent from my iPhone using Tapatalk

[midlandtech]

Wash, wax, quick detail on the interior and on engine. Found lots of swirls for next polishing. Also took pics of new wheel finish. They're definitely closer to the new M wheel finish than stock BMW.

http://tapatalk.com/mu/43535d96-b68d-9618.jpg
http://tapatalk.com/mu/43535d96-b69e-c3f4.jpg
http://tapatalk.com/mu/43535d96-b6af-5654.jpg
http://tapatalk.com/mu/43535d96-b6bf-ee80.jpg


Sent from my iPhone using Tapatalk

Ooooo shiney

-- Sent from my Palm Pre using Forums (http://developer.palm.com/appredirect/?packageid=com.newnessdevelopments.forums)

[goofiefoot]

Looks good, zhpnsnv!

[GMATT]

Car looks good Marc!

[kayger12]

Wash, wax, quick detail on the interior and on engine. Found lots of swirls for next polishing. Also took pics of new wheel finish. They're definitely closer to the new M wheel finish than stock BMW.

http://tapatalk.com/mu/43535d96-b68d-9618.jpg
http://tapatalk.com/mu/43535d96-b69e-c3f4.jpg
http://tapatalk.com/mu/43535d96-b6af-5654.jpg
http://tapatalk.com/mu/43535d96-b6bf-ee80.jpg


Sent from my iPhone using Tapatalk

:like

Droid X. Tapatalk. Use it.

[zhpnsnv]

Thx all. Internet pics do lots of favors for my car as there are many flaws.


Sent from my iPhone using Tapatalk

[danewilson77]

http://i1015.photobucket.com/albums/af278/nicee46/IMAG0066.jpg

http://i1015.photobucket.com/albums/af278/nicee46/IMAG0065-1.jpg

[lilcdkey]

Attempted to restore my alcantara wheel. It turned out alright..

[goofiefoot]

Dang, Dane - how much horsepower you trying to add? ;)

[danewilson77]

Dang, Dane - how much horsepower you trying to add? ;)

Lol....I took the sideskirt stickers off. Net gain is zero.

HTC Thunderbolt+TT

[GMATT]

BMW short shift lever, Mehye FCAB's ordered and Jack pads.all from ECS Tuning. Also ordering a KW V1 coil over kit on Tuesday :pimp (thanks Dane!)

[danewilson77]

BMW short shift lever, Mehye FCAB's ordered and Jack pads.all from ECS Tuning. Also ordering a KW V1 coil over kit on Tuesday :pimp (thanks Dane!)

Very nice Gare bear

HTC Thunderbolt+TT

[az3579]

Dane,
How do you know about Kaizen Tuning?

Sent from my DROIDX using Tapatalk

[danewilson77]

I am a customer.

HTC Thunderbolt+TT

[Johnmadd]

Dane,
How do you know about Kaizen Tuning?

Sent from my DROIDX using Tapatalk


I am a customer.

HTC Thunderbolt+TT

You guys got secret hook ups and not sharing with the mafia fam?
You guys need to share here http://www.zhpmafia.com/forums/showthread.php?1693-Links-to-get-parts.&p=69940#post69940

[az3579]

You drive to Massachusetts to get work done?
You baller, DW. Stop by on the way back, will ya? :)

[danewilson77]

You drive to Massachusetts to get work done?
You baller, DW. Stop by on the way back, will ya? :)

I'll think about it.

[TRELO]

M3 fogs!


Opa iPhone

[static667]

Bled brakes and rotated tires. Now for that window regulator...

[lilcdkey]

gonna try and get around to hardwiring my escort today.

[cakM3]

Fixed my bulb out error on my tail light :roundel

[lilcdkey]

New license plate bracket and hardwired my radar.

[billschusteriv]

:like

BlackBerry. Tapatalk. Booyah!

[lilcdkey]

Babied her and took alot of pictures.

[DeM3n]

Babied her and took alot of pictures.

Pics or it never happened. :)

[lilcdkey]

Pics or it never happened. :)

"My Sandy Photoshoot" in the ZHP Pics section.

[slowCoupe]

Vacuumed the interior quickly. Hit the glass with some Windex, the other night while driving & raining there was an oily film all over the outside of the windshield. Hopefully it's gone now. Should apply some RainX.

Also purchased a few parts..

Wahler thermostat ($64.75, Pelican Parts). I've thought about getting an aluminum housing t-stat, maybe next time.

Akebono EUR683 ceramic rear brake pad set ($62.49, Amazon).

Bowa rear brake sensor ($12.50, Pelican Parts).

Belts are fine, but the idler tensioner pulley is starting to have a little bit of chatter, I believe. If I replace that I might just go with a Stewart Components (http://www.stewartcomponents.net/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=BMWHPWP)high-performance water pump at the same time. They're $195 but I've read they last forever, draw a little less power from the engine, and truly are more effective.

Have tiny bit of oil seepage around the oil filter adapter housing. The gasket is like $6.50 but it's a PITA to get to. Probably let that go for a while.

The liner on my c-pillars has come loose, most likely from the summer heat through the rear glass. Is there a recommended adhesive to use that won't bleed through? I've been meaning to get some tint on the sides and rear..

Oh, and my windshield washer resovoir has a drip coming from the bottom, need to investigate that.

[cakM3]

Put my ZHP in the garage while I take the ///M out for a long road trip :cool

[danewilson77]

Rear KW V1's installed....and cleaned all 4 wheel speed sensors. The rears were shockingly dirty and mucky.

[romanred62]

What did I do... I drove it. Soon I will be replacing the oil filter housing gasket. Just need to find a day when i have 5 free hours.

[danewilson77]

5 hours! I bet you can get it done in 4 hours, 45 minutes!

[danewilson77]

More like 3! It's an easy DIY.
http://www.e46fanatics.com/forum/showthread.php?t=659100

Agree. I was trying to make a funny.

[static667]

Agree. I was trying to make a funny.

Fail. :P

[az3579]

I cleaned it up real good for today's show and shine. Pics up later.

Sent from my DROIDX using Tapatalk

[danewilson77]

Changed out precat o2 sensors today, with the aide of johnmadds tools.

HTC Thunderbolt+TT

[Johnmadd]

Changed out precat o2 sensors today, with the aide of johnmadds tools.

HTC Thunderbolt+TT

Glad they worked out for you dude.

[Katu]

Changed both belts, both tensioners and the pulleys.. it was much easier than I thought!

My AC belt was in good shape, but my serpentine belt had a lot of cracking.

[lilcdkey]

new sticker ;)

[cakM3]

Put my ZHP in the garage while I took the ///M out on a long road trip...:biggrin

Here's the ///M :cool
http://i395.photobucket.com/albums/pp37/macdctr/photo4-2.jpg
http://i395.photobucket.com/albums/pp37/macdctr/photo5.jpg

///M looks like this after putting 800 miles on...:thumbsup

[danewilson77]

New in cabin air filter cover installed.

http://i1015.photobucket.com/albums/af278/nicee46/IMAG0204.jpg

Slow but sure..

HTC Thunderbolt+TT

[HokieZHP]

cleaned the interior. waiting for cooler weather to wash the outside

[jvr826]

Gave her a good wash, wiped down the interior, vacuumed the carpets and floor mats, mounted my street wheels with new Hankook Ventus V12 tires and dressed them up with some Chemical Guys Silk Shine dressing. Time to break in those new shoes!

[danewilson77]

what happened to your old one?

It was looking old...so I painted it and made it look worse.

Naaaa...it didn't look bad. I don't even think anyone at the meet noticed.

HTC Thunderbolt+TT

[danewilson77]

I used a black heat resistant automotive paint. You can see the cover in the KW and Cusco strut bar thread.

New cover is pretty cheap.

HTC Thunderbolt+TT

[lilcdkey]

http://i395.photobucket.com/albums/pp37/macdctr/photo4-2.jpg
http://i395.photobucket.com/albums/pp37/macdctr/photo5.jpg

:drool

I installed my oem homelink yday.

[goofiefoot]

cakM3 - Daaaaaaayyuuuumn!!! That's a beaut!

lilcdkey (and whoever else) - I remember seeing a hook-up for low-cost OEM Homelink boxes. Any links?

[johnrando]

Put my ZHP in the garage while I took the ///M out on a long road trip...:biggrin

Here's the ///M :cool
http://i395.photobucket.com/albums/pp37/macdctr/photo4-2.jpg
http://i395.photobucket.com/albums/pp37/macdctr/photo5.jpg

///M looks like this after putting 800 miles on...:thumbsup

Charlie, great pic. Could you get that shot with just the Pioneer bldg w/o the others? And, any way you can get a tunnel shot of your car, either in the tunnel or from the tunnel looking toward the car? Seems like that could be MONEY!

[GSEN820]

cakM3 that is one sick M3...... Love the rims with the color (not much into black rims). CSL trunk really set it off.

[GMATT]

Received a box from Fed Ex

[danewilson77]

Received a box from Fed Ex

No tease. KW V1's.

HTC Thunderbolt+TT

[GMATT]

YUP!!!!!!! :pimp

[lilcdkey]

washed her..

[edlvrt]

Control arm bushings, fuel filter, trans, diff and brake fluid, and CDV delete. Shifting is much smoother than the original 70k mile old gear oil, and no rattle while going over bumps. Now I need to figure out/get rid of this awful initial throttle response and high clutch engagement. Does anyone have any experience with the various clutch stops and/or throttle enhancers on the market? The only thing I would have done different than BMW to the design and function of this wonderful car are the pedals.

[Stu]

Installed wheel locks, washed, tire shine, and put on wheel wax.

Pro tip: Don't put wheel wax on 135M's unless you really really want to spend a long freaking time getting all of it off. This stuff better be worth it or I'm never putting it on again.

[MsRN]

Bought her some presents--OE thermostat, EMP Stewart coolant pump, Ferodo DS2500 front pads, windshield sunshade, Meyle front swaybar links, foamed wool detailing pads, and Dodo Juice Sealant Wax! (Girls like to have fun and be pretty, too!). :)

[cakM3]

Charlie, great pic. Could you get that shot with just the Pioneer bldg w/o the others? And, any way you can get a tunnel shot of your car, either in the tunnel or from the tunnel looking toward the car? Seems like that could be MONEY!

Thanks John!

I was in a hurry when I took this picture, unfortunately I did not get a blank pic of just the building. Next photo opportunity similar to this I will take a blank shot first then try other angles. In this location, I was not able to drive through the tunnel (curb too high) so this was the best I could do at the moment. As for being in the tunnel looking at the car, I will try this the next time. Awesome feedback, thanks again! :thumbsup

[cakM3]

cakM3 that is one sick M3...... Love the rims with the color (not much into black rims). CSL trunk really set it off.

thanks for the complements :) My next project will be the ZHP. Giving me some time to begin it's transformation. Love these cars!

[cakM3]

:drool

thanks :biggrin

[cakM3]

cakM3 - Daaaaaaayyuuuumn!!! That's a beaut!

lilcdkey (and whoever else) - I remember seeing a hook-up for low-cost OEM Homelink boxes. Any links?

appreciate the feedback Jason! Your ZHP is a beaut as well :thumbsup

[Hermes]

cleaned the sh*t out of the interior, tomorrow gonna wash and wax

[danewilson77]

cleaned the sh*t out of the interior, tomorrow gonna wash and wax

Prescription for a perfect Saturday.

HTC Thunderbolt+TT

[GERMANIAC]

Just installed my new air intake. Thanks for the recommendations. It went in easy and works great...

[HokieZHP]

washed, clayed, waxed. Took off the wheels and cleaned them inside and out.

[kayger12]

Just installed my new air intake. Thanks for the recommendations. It went in easy and works great...

Nice!

[danewilson77]

Changed out wheel speed sensor.

HTC Thunderbolt+TT

[GERMANIAC]

Just one tip when installing your new air intake. It helps to lubricate the o-ring going into the mass airflow sensor port. I used a little petroleum jelly and it slid right in. Nice...

[Go Horns!]

Washed at the touchless. Cleaned the inside.

[Washburn]

cleaned/wiped exterior with PoorBoys' quick detailer -
i know there are better products - will switch to a better product soon
(Meg's or Einszett or perhaps some type of spray wax AND detailer combo like Wolfgang perhaps ??)

One thing I noticed - since using the Sonax and putting PoorBoys' wheel sealant, a lot LESS brake dust is on the wheels, and just wiped off REALLY easy with just a wet rag/quick detailer! Not baked on like before :) so yeah, if you clean wheels, PROTECT that clean finish with some type of wax/sealant, and PREVENT future brake dust from sticking.

[DirtyPillows]

Install new front tire splash sheilds.

[danewilson77]

Adjusted alignment and got a data point.

3rd gear, 6000rpm, 80mph.

HTC Thunderbolt +TT

[Radarcontact]

New tires!

[wsmeyer]

I bought one of those short shifter kits on sale for $84 at ECS:

http://www.ecstuning.com/BMW-E46-330i-M54_3.0L/Drivetrain/Shifter/ES46510/

I'm sure the lever is the same length as my stock ZHP one but it's worth that price just for the boot and knob. Maybe I'm just getting bored after five years but I want to change it up a little and also get the Alcantara E-Brake cover and eventually a wheel from Colby.

William.

[Alphatek45]

All cleaned up. Gonna look for a nice place for some shots...

[cakM3]

Adam,

nice :thumbsup

[danewilson77]

All cleaned up. Gonna look for a nice place for some shots...

Must be taking her out for some urban shots, huh?

[Alphatek45]

Sadly, I'm much better with the Glock than the Nikon. Holy shit I have a lot to learn...

[MsRN]

Sadly, I'm much better with the Glock than the Nikon. Holy shit I have a lot to learn...

Study, and practice! Make lots of mistakes, and try to learn something from each!

[Go Horns!]

Cleaned the steering wheel. Just trying to keep it looking good.

[carsontl]

What do you clean the steering wheel with? Mine is pretty gross (thanks previous owner!)

Over the weekend I took off the front license plate mount and then frowned that there were 6 screw holes in it... shrugged and left it off the car haha

[danewilson77]

What do you clean the steering wheel with? Mine is pretty gross (thanks previous owner!)

Over the weekend I took off the front license plate mount and then frowned that there were 6 screw holes in it... shrugged and left it off the car haha

Materials:

- Mr. Clean Magic Eraser (Original version only)
- Damp bath towel(s)
- Suede/Alcantara shoe cleaner (optional)
- Lint Remover (optional)

http://www.zhpmafia.com/forums/showthread.php?402-DIY-Restore-Your-Alcantara-Steering-Wheel

[carsontl]

nice link, thanks! I don't think I can use the guide though since they say not to do it if the wheel is deteriorating so I guess I'll just deal with it till I can get with Coby and get a swap.

[danewilson77]

Sounds like a plan.

HTC Thunderbolt+TT

[carsontl]

everytime i drive my hands feel gross lol, might just do the damp cloth just to get some of the issue resolved until i can cough up the beans for the for swap

[danewilson77]

everytime i drive my hands feel gross lol, might just do the damp cloth just to get some of the issue resolved until i can cough up the beans for the for swap

Like mentioned..the Coby Wheel Retrofit = :drool

[Marcus-SanDiego]

Like mentioned..the Coby Wheel Retrofit = :drool

And be sure to mention ZHP Mafia for a 10% discount.

[CERF04ZHP]

So how does this Coby wheel swap work? Do you order one and are charged the wheel PLUS the core, then when you send your old wheel back, they credit you the core charge? I am VERY interested in doing this. Love the tri-color Alcantara.

[MrMaico]

So how does this Coby wheel swap work? Do you order one and are charged the wheel PLUS the core, then when you send your old wheel back, they credit you the core charge? I am VERY interested in doing this. Love the tri-color Alcantara.

Correct. I had mine done last winter so I just sent him my wheel and had it recovered so I didn't have to deal with the core charge.

http://mrmaico.smugmug.com/Cars/BMW-333Ci/IMG0749/1196329053_UFqXN-L.jpg

[CERF04ZHP]

Correct. I had mine done last winter so I just sent him my wheel and had it recovered so I didn't have to deal with the core charge.

http://mrmaico.smugmug.com/Cars/BMW-333Ci/IMG0749/1196329053_UFqXN-L.jpg

Perfect, thank you. Which did you go with? I think the Gray Alcantara is probably closer to factory-spec. than the Black, correct? But I think I would have to go with the tri-color stitching...

[danewilson77]

Bimmian German flag stripes on the grill....and another round of Dr. Colorchip.

HTC Thunderbolt+TT

[GERMANIAC]

The gray is the factory spec. I recently had mine done with tri-color M stitching and a yellow attack stripe. You can see photos of it installed on my thread. Search Coby Wheel. I would email Mike directly at Coby Wheel for prices and options.

[CERF04ZHP]

The gray is the factory spec. I recently had mine done with tri-color M stitching and a yellow attack stripe. You can see photos of it installed on my thread. Search Coby Wheel. I would email Mike directly at Coby Wheel for prices and options.

Great, thanks. Just emailed him. Really psyched about this, I was reaching a dead-end with steering wheel replacement options, but this seems to be the perfect solution.

[danewilson77]

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC05049.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC05048.jpg

[MrMaico]

Great, thanks. Just emailed him. Really psyched about this, I was reaching a dead-end with steering wheel replacement options, but this seems to be the perfect solution.

Yup, the 9005 Grey is oem. No doubt you will be very happy with Mikes work, top quality and no one comes close to his prices that I've ever found.

My center roundel was showing its age a little and I just happened to have this helmet sticker laying around that I bought at the BMWMOA rally a few years ago. Gave it a try and it's a perfect fit and IMO looks much better than the plastic chrome looking factory one.

http://mrmaico.smugmug.com/Cars/BMW-333Ci/i-RcDQZtF/0/L/IMG1191-L.jpg

It comes with a ring of adhesive tape on the back but I just used a tiny piece of 2 sided tape in the center for a test fit and it's still holding good with just that. Eventually I think I'll try to remove all the tape and just mount it with a dab of silicone. It sticks out now maybe .5 mm so you have to look for it to notice but fully flush would be even better.

http://mrmaico.smugmug.com/Cars/BMW-333Ci/i-JT9GxQN/0/L/IMG1194-L.jpg

Here is a link for anyone interested.....

http://www.sierrabmwonline.com/product_info.php/bmw-motorcycles-aluminum-helmet-roundel-bmw-1150-hr1-p-362?osCsid=vs78k0o9fc3o8k0hnlfp8r9p75

Barry

[johnrando]

Grills look great DW!

[danewilson77]

Grills look great DW!

You like?

Good.

HTC Thunderbolt+TT

[static667]

You like?

Good.

HTC Thunderbolt+TT

The stripes are sweet.

[GERMANIAC]

A real deutsher-auto...

[DeM3n]

Last night, finished up most of my tune-up. Oil change, new plugs, cabin air filter, K&N filter... later today.... fuel filter to finish it up!

[gr330zhp]

I changed my fuel filter today, oil change and washed her up...

As she sits right now :)
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/284817_1957957468795_1238496470_31907105_2800675_n .jpg

[cakM3]

had my program code reset back to factory default and then set up for factory alarm & convienence settings.

[lilcdkey]

6000k HID kit
LED fog lights
LED turn signals
LED reverse light
LED license plate bulbs
LED side markers

[Washburn]

A real deutsher-auto...

Deutsches Auto.

[GMATT]

I got very "low"...........and a short shifter!

[carsontl]

Cleaned my alcantara steering wheel today, it's been feeling gross and this is what came out of it... no wonder i've had to wash my hands after driving the car every day LOL

To the smartypants responses, I placed the toothbrush and microfiber towel in there AFTER I was done :P

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/268621_792613908606_39502440_37724246_2820911_n.jp g

[goofiefoot]

Started my first detaiing. I can say today, since I finished up the first part at 12:45 this morning.

Washed, clayed, and applied Chemical Guys EZ Creme Glaze. I learned a few things:

1. I need a LOT more microfiber.

2. Claying is not near as hard as I was thinking it would be. I was surprised the paint was as clean as it was.

3. While the car is nice and shiny, the glaze didn't make near as much of a difference for my swirl marks as I was hoping.

4. A polisher would make this kind of work much, much easier.

5. Even in the middle of the night, doing this type of work in Texas, in the summer is miserable. I think I lost about 5 pounds sweating.

Next steps:

1. Remove the wheels, spray them down with SONAX, and scrub.

2. Clean the wheels wells

3. Engine bay cleaning

4. Vacuum interior

5. Wipe down all interior surfaces with 303

6. Go after my seats with Einszett 1Z Lederpflege

7. Go over trim with Back to Black

8. Finish off the paint with Poorboys Natty Blue Paste Wax

Now that I have this all typed out, I'm realizing I need to get started! ;)

[cakM3]

Washed and cleaned my ZHP, then put a cover over it...:biggrin

[danewilson77]

Engine bay detail with Silkolene.

Exterior detail.

New passenger side front wheel bearing.

HTC Thunderbolt+TT

[BCS_ZHP]

BMW Performance Air Intake for the conv, plus an engine bay cleaning. Chamfered (sic?)the the front brake pads chasing an intermittent squeek. Damn if I didn't attack the wrong end, rears will be addressed tomorrow.

[az3579]

Yesterday,
Got it reeeeeeeal durty on the wet skid pad at New Hampshire Motor Speedway for Boston chapter's Advanced Car Control school.

[az3579]

Just added some programming options; halogen highs with Xenon highs and euro hazards. Also changed my service interval from the standard 25,000km to 11,000km.

[danewilson77]

Just added some programming options; halogen highs with Xenon highs and euro hazards. Also changed my service interval from the standard 25,000km to 11,000km.

Well done BP.

HTC Thunderbolt+TT

[BCS_ZHP]

Rear pads chamfered too, squeek gone. Also did some cleaning and posted some photos on the forum in that area.

[static667]

Just added some programming options; halogen highs with Xenon highs and euro hazards. Also changed my service interval from the standard 25,000km to 11,000km.

You tha man, BP. I wish I had the equipment and know how to do that stuff.

[Marcus-SanDiego]

Just added some programming options; halogen highs with Xenon highs and euro hazards. Also changed my service interval from the standard 25,000km to 11,000km.

Now that's sweet. Nice, BP.

[quikryptonite]

Yesterday, my dad and I spent about 90 minutes working to remove some hard water stains that had formed on my car from the sprinklers while I was on vacation. I think we finally resorted to Maguiar's Ultimate Compound for most of the body, but the good news is I think we took a few swirls out as well. It looks sa-weeeeet right now in the garage. After I put that much time into it, I had to take her out on the road and have a bug splat on the car or something.

Such is life.

[carsontl]

i have all the gear to detail my car, but I'm not going to bother until august or september when I don't stand in a pool of my own sweat after 10 minutes of working on the car lol

[lilcdkey]

i have all the gear to detail my car, but I'm not going to bother until august or september when I don't stand in a pool of my own sweat after 10 minutes of working on the car lol

The other day I was taking off my tint, just sitting my backseat (coupe) for 10 minutes and I was drenched in sweat. It's terrible.

[lilcdkey]

I broke one of the clips on my garage opener/sun roof opener panal thing. I secured it today with some double sided tape.

[carsontl]

The other day I was taking off my tint, just sitting my backseat (coupe) for 10 minutes and I was drenched in sweat. It's terrible.

how hard is it to take the tint off? I want to get darker tint than what is currently on the car... going for some premium ceramic tint to keep more heat out of the car.

[lilcdkey]

how hard is it to take the tint off? I want to get darker tint than what is currently on the car... going for some premium ceramic tint to keep more heat out of the car.

It's simple, all you need is patience. There are tons of DIY's online. Some people leave the rear windshield up to the professionals because they don't want to mess with their defroster lines. I took my rear windshield tint off myself.

[danewilson77]

Just finished coding for the double impulse hazards and changed the service interval to 11.000km as well

Freakin' sweet!

Guys are killing me.

HTC Thunderbolt+TT

[az3579]

Haha, sorry. I absolutely love now having an accurate service interval!!!
What the hell was BMW thinking with 15k mi intervals

I dunno about accurate. I still don't like the nearly 7k interval. Wish I could set it to 5k...

I'm going to check whether I can set it to a custom interval.

Sent from my DROIDX using Tapatalk

[AzkotikBMW]

Yesterday I replaced my stock rear shock tower mounts with some new ones from www.rogueengineering.com. These were awesome to install, very high quality and they ride like a dream so far. Would definitely recommend to anyone who is in need of a replacement to check those out.

-- Sent from my Palm Pre using Forums (http://developer.palm.com/appredirect/?packageid=com.newnessdevelopments.forums)

[danewilson77]

$99. Well done.

HTC Thunderbolt+TT

[AzkotikBMW]

$99. Well done.

HTC Thunderbolt+TT

Yea, $99 for the quality on them is really a steal. The "upgraded stock" ones from Turner Motorsports will run about $60 for considerably less quality (in my opinion at least, helped a friend install them).

-- Sent from my Palm Pre using Forums (http://developer.palm.com/appredirect/?packageid=com.newnessdevelopments.forums)

[HokieZHP]

Yesterday I replaced my stock rear shock tower mounts with some new ones from www.rogueengineering.com. These were awesome to install, very high quality and they ride like a dream so far. Would definitely recommend to anyone who is in need of a replacement to check those out.

-- Sent from my Palm Pre using Forums (http://developer.palm.com/appredirect/?packageid=com.newnessdevelopments.forums)

How does one know if their rear shock tower mounts need to be replaced?

[gr330zhp]

I am waiting right now at BMW for an inspection sticker

Sent from my HTC Desire, Like a BOSS!

[DeM3n]

Mtech 2 CF rep splitters came in today as well as my Bimmian CF shortened Radio Antenna and painted reflectors :) Can't wait to get home!

[Stu]

Glued my drooping pillars back with 3M 77 spray adhesive. We'll see how long it lasts. This is my quick fix cause I don't feel like spending money ;) I did a relatively decent job, I think.

Putting the A-pillars back on is a total bitch, though. The little clip thing that slides in at the back of the dash is hard to get in, and the screws are super super hard to screw in. Moral of the story: use a ratchet w/ T20 Torx!

[Marcus-SanDiego]

Stu, I had fun watching your Facebook page for updates on this project.

[gr330zhp]

When I was getting my sticker at BMW....

Service Advisor: "Your car passed inspection, haha no issues there. Damn thats a beauty."

Me: "Thanks"

SA: "We didnt have record of brake fluid flush, diff fluid, power steering fluid or Inspection II. We recommend getting all of that done"

Me: "Yeah, I did ALL of that on my own already, as well as tranny fluid :-)

SA: "Ahhhhh a BMW maintained the proper way" :)

Sent from my HTC Desire, Like a BOSS!

[Marcus-SanDiego]

^^ :chuck

[Stu]

asld;kjfaklsdfajslkdfhliakjdfhlaskjdf

My C-pillar trim felt fell off already. I'm going to glue that one just once more. If it falls off again, it's being replaced. That one is the easiest to get off, though, so I'm not too annoyed.

[kayger12]

SA: "Ahhhhh a BMW maintained the proper way" :)

Sent from my HTC Desire, Like a BOSS!

LOL.

[iZHP]

changed some car key memory settings with Progman! Finally got my diagnostic computer up and running FTW :thumbsup

[variate]

Ordered personalized plate, RED ZHP. :o

[rickflairne]

Powerflex FCABs, 12mm spacers on the rear, BMW Performance short shift kit and put on another pair of 135m style rears to square up my wheel package

[danewilson77]

Powerflex FCABs, 12mm spacers on the rear, BMW Performance short shift kit and put on another pair of 135m style rears to square up my wheel package

:drool

HTC Thunderbolt+TT

[Stu]

Superglued my M stickers onto my wheels. NEVER AGAIN will they fall off. I went through a pack of 10 of them.

[az3579]

Superglued my M stickers onto my wheels. NEVER AGAIN will they fall off. I went through a pack of 10 of them.

Never again will you be able to replace 'em, either. :rofl

[nike001]

Replaced rotors and pads today. What a pain in the ass... I don't think my rotors were ever changed..

[danewilson77]

I looked at the sand on my hood. That's what I did

HTC Thunderbolt+TT

[lilcdkey]

wash and wax, going to Chicago's Summer Bash Car Show at 5:30.

[danewilson77]

Just washed it. Back from vaca.

HTC Thunderbolt+TT

[Mtnman]

DISA removal, Inspection, trip to the dealer to compare to new DISA, DISA reinstall. Then Fuel Filter change. What a PITA. nasty. then wash. then wax. then me tired. drinks.

[cakM3]

I did some paint correction detail on my hood this morning :p

Also clayed and polished my windshield :biggrin

Here are a few pics from my weekend effort:
http://i395.photobucket.com/albums/pp37/macdctr/Jul31-2-1.jpg
http://i395.photobucket.com/albums/pp37/macdctr/Jul31-1-1.jpg
http://i395.photobucket.com/albums/pp37/macdctr/Jul31-3-1.jpg
http://i395.photobucket.com/albums/pp37/macdctr/Jul31-4-1.jpg

[lilcdkey]

HID low beam, LED fog lights, LED license plate bulbs.

[kayger12]

Apologized to her for not having the time to install the $300 worth of pulleys and cooling system parts that i bought for her and have been sitting in the garage for a few weeks now.

[danewilson77]

Apologized to her for not having the time to install the $300 worth of pulleys and cooling system parts that i bought for her and have been sitting in the garage for a few weeks now.

Oooo...I bet she's pissed.

HTC Thunderbolt+TT

[Marcus-SanDiego]

Apologized to her for not having the time to install the $300 worth of pulleys and cooling system parts that i bought for her and have been sitting in the garage for a few weeks now.

Keep that up and your girl may force you to do what my girl made me do (sell). :biggrin

[wsmeyer]

Picked up an Alcantara steering wheel for $325 to match the shift knob and boot I picked up a couple of weeks ago. Love the original ZHP ones but after 5 years I needed a little change and I wanted to keep it "stock".

William.

[BCS_ZHP]

Cleaned her today, and it was a PITA. Some numbnuts came into the place where my wife works last Monday, he followed my weekend cleaning by putting something on the tires. Well, the tires are still fairly new (6 months), so I'm intentionally not using any tire shine. Some kind of reaction between the petroleum aging out of my tires and this junk the dude put on her tires, there were tar balls all over the side of the car, fenderwells, mirrors were caked with it. Took me almost 2 hours just to get rid of all the tar balls, then a wash. I asked her to call me next time numbnuts comes to her work, I'm driving over for a chat...

[Marcus-SanDiego]

I refuse to allow that stuff to be put on my tires -- for that reason. Sucks.

[BCS_ZHP]

Agree, he never asked, just did it. And she didn't even notice, I saw it when I got home Tues night. First thought one of my boys dressed the tires, they swore they didn't, then found out that someone was working the lot at my wife's place of work (a tennis/racquetball club).

[HokieZHP]

Drove my car back from Wilmington and the check engine light came on...

I know the oil separator needs to be replaced and the vanos hasn't been done yet so I'm scratching my head as to what it is. Should know tomorrow afternoon when I get to my mechanic's and hook it up to a computer.

[danewilson77]

Drove my car back from Wilmington and the check engine light came on...

I know the oil separator needs to be replaced and the vanos hasn't been done yet so I'm scratching my head as to what it is. Should know tomorrow afternoon when I get to my mechanic's and hook it up to a computer.


In for codes.

HTC Thunderbolt+TT

[DirtyPillows]

I got my zhp a present! :D
http://tapatalk.com/mu/aefc7fcc-1aa3-28d5.jpg

Hopefully I can take her out on a date soon with it on!

Sent from my DROIDX using Tapatalk

[Hobbes]

Simple wipe down, cleaned the wheels, switched the carbon fiber roundels to the standard blue and whites (call me a purist), replaced the shift knob roundel (graphics separated), removed the black 330Ci badging (prefer it blank), topped off the oil, and stared with a stupid grin on my face. :)

[billschusteriv]

I got my zhp a present! :D
http://tapatalk.com/mu/aefc7fcc-1aa3-28d5.jpg

Hopefully I can take her out on a date soon with it on!

Sent from my DROIDX using Tapatalk

Sweet! In for pics.


Simple wipe down, cleaned the wheels, switched the carbon fiber roundels to the standard blue and whites (call me a purist), replaced the shift knob roundel (graphics separated), removed the black 330Ci badging (prefer it blank), topped off the oil, and stared with a stupid grin on my face. :)

Noice.

[az3579]

I refuse to allow that stuff to be put on my tires -- for that reason. Sucks.

I've never had a problem with it... perhaps it's the brand used? :dunno


I got my zhp a present! :D
http://tapatalk.com/mu/aefc7fcc-1aa3-28d5.jpg

Hopefully I can take her out on a date soon with it on!

Sent from my DROIDX using Tapatalk

Aaaaaahhhh, Style 71's! Welcome to the (very exclusive) club! :biggrin
Are they in the ZHP size (18x8 et47, 18x8.5 et50) or the 17" size?

[HokieZHP]

I've only had issues with the spray on tire shine. I use Armoral Tire Shine that is applied with the foam applicator and love it!

[DirtyPillows]

No they are 17" which I don't mind at all. But it does prevent me from taking my tires off my style 135 and using them. The plus though is they are lighter which makes ne happy.

Sent from my DROIDX using Tapatalk

[spig]

Did this on Saturday: E9x M3 motor mounts, new steering coupler, new headlight lenses.

[Newjack]

Thorough washing and used sonax on my wheels to get that baked on brake dust off. There are still some itty bitty spots that couldn't come off. But I am a believer in the power of sonax now. My wheels have never looked so clean before.

[HokieZHP]

So my check engine light went off on my way to my mechanics...so I'm not sure what it was. I'll see if it comes back on and report back.

[kayger12]

Agree, he never asked, just did it. And she didn't even notice, I saw it when I got home Tues night. First thought one of my boys dressed the tires, they swore they didn't, then found out that someone was working the lot at my wife's place of work (a tennis/racquetball club).

Bruce-- fwiw, I use a water-based tire dressing that I got from Detailed Image (Optimum Tire Shine, iirc). From what I read its good stuff and doesn't interact with the compounds in the tire.

[kayger12]

Keep that up and your girl may force you to do what my girl made me do (sell). :biggrin

NEVER!!!

[HokieZHP]

Just gave her a wash

[balk14]

put the plates on my newest addition :) then sat in the drivers seat and read the owners manual...first drive comes tomorrow!!!

[lilcdkey]

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/206178_10150740929085438_780915437_20003433_606890 0_n.jpg
hit and run. life's a bitch.

[danewilson77]

Damn...sorry bro.

[fricker66]

I installed black grilles. Not the best quality and one tab on the factory grilles broke during the removal process. But after way too long in the searing heat I got the new ones placed well and very much liking the new look.

I didn't find a thread to confirm where you all are buying your aftermarket grilles. I opted for ECS and wasn't overly impressed with the less than stellar quality in comparison to the factory version. YMMV...

[MrMaico]

I installed black grilles. Not the best quality and one tab on the factory grilles broke during the removal process. But after way too long in the searing heat I got the new ones placed well and very much liking the new look.

I didn't find a thread to confirm where you all are buying your aftermarket grilles. I opted for ECS and wasn't overly impressed with the less than stellar quality in comparison to the factory version. YMMV...

I would bet that all or most of the flat black ones come from the same place. I wasn't real impressed with my aftermarket flat black ones either. I ended up getting the BMW gloss black ones. Much better quality and the gloss just matches better too IMO.

Barry

http://mrmaico.smugmug.com/Cars/BMW-333Ci/IMG0359/698705311_c3KG2-L.jpg

[johnrando]

Do they have factory gloss black?

[MrMaico]

Do they have factory gloss black?

Yup, that's what mine are. About $50 a piece.

http://www.realoem.com/bmw/showparts.do?model=BD53&mospid=47713&btnr=51_7191&hg=51&fg=95

http://www.trademotion.com/partlocator/index.cfm?action=MorePartInfo&PartID=873627&siteid=214672&catalogid=4462

EDIT: I'm not positive that that 1st pic was the gloss ones now that I think about it. This one definitely is though...

http://mrmaico.smugmug.com/Cars/BMW-333Ci/i-Zjpj8pr/0/L/IMG0923-L.jpg

Hi-res.....

http://mrmaico.smugmug.com/Cars/BMW-333Ci/i-Zjpj8pr/0/X3/IMG0923-X3.jpg

[CERF04ZHP]

1675

Sent from my HTC EVO using Tapatalk.

[danewilson77]

I like the ///M pedal.

I bought new rims and tires today....for the ZHP.

dees. Mine are silver though. These look gun metal.

http://i1015.photobucket.com/albums/af278/nicee46/w220917137.jpg

[CERF04ZHP]

I like the ///M pedal.

I bought new rims and tires today....for the ZHP.

dees. Mine are silver though. These look gun metal.

http://i1015.photobucket.com/albums/af278/nicee46/w220917137.jpg

Those are gonna look HAUGHT on an IR ZHP.

[danewilson77]

Those are gonna look HAUGHT on an IR ZHP.

Concur. Thanks.

[llll1l1ll]

I washed mine today. Discovered a nice coat of wax and rain-x on there. Good. Saves me some time.

[static667]

I like the ///M pedal.

I bought new rims and tires today....for the ZHP.

dees. Mine are silver though. These look gun metal.

http://i1015.photobucket.com/albums/af278/nicee46/w220917137.jpg

Sweet. You were contemplating this purchase last week...

[lilcdkey]

I would bet that all or most of the flat black ones come from the same place. I wasn't real impressed with my aftermarket flat black ones either. I ended up getting the BMW gloss black ones. Much better quality and the gloss just matches better too IMO.

Barry

http://mrmaico.smugmug.com/Cars/BMW-333Ci/IMG0359/698705311_c3KG2-L.jpg

I love these on your IR coupe. I'm so glad I went with OEM, looks classier than flat black.

[danewilson77]

Sweet. You were contemplating this purchase last week...

Si Senor. El finito.

[lilcdkey]

Oil change and 35pt inspection. My car passed with flying colors.

[danewilson77]

^well done. Ride is detailed for the meet. Some Apple hole dumped rocks all over my hood and down left side of car. Small scratch on new BBS's. FML.

HTC Thunderbolt+TT

[johnrando]

Oh no! Sucks Dane.

[Marcus-SanDiego]

^well done. Ride is detailed for the meet. Some Apple hole dumped rocks all over my hood and down left side of car. Small scratch on new BBS's. FML.

HTC Thunderbolt+TT

You've been having some bad luck lately. Sheesh.

[DirtyPillows]

C-Pillars fixed :D

[kayger12]

^well done. Ride is detailed for the meet. Some Apple hole dumped rocks all over my hood and down left side of car. Small scratch on new BBS's. FML.

HTC Thunderbolt+TT

Wtf?

Droid X. Tapatalk. Use it.

[Johnmadd]

Got my rcr's on and was going to put the clear corners on but they were so clear and shiny that I decided to wait and order new lenses before I put them on.

[mimalmo]

washed it for the first time in a couple weeks.

Oh and vanity plate is on now. :)

[danewilson77]

Oh no! Sucks Dane.


You've been having some bad luck lately. Sheesh.


Wtf?

Droid X. Tapatalk. Use it.

The woe's of it as a DD.


washed it for the first time in a couple weeks.

Oh and vanity plate is on now. :)

What did you end up going with?

[llll1l1ll]

Changed the oil to BMW High Performance Synthetic 5w-30.

[mimalmo]

What did you end up going with?


Sorry, thought you already saw the pic in the vanity plates thread. Went with this:

1680

[Audi 0000]

I wanted to go to the fest, but I had to work. Work was slow, so I installed red clear red tails, 4 wheel alignment, replaced the H20 pump, thermostat, hoses, and belts. I bought the car with higher mileage so I was sweating the coolant components. Only thing I didnt get was the idler and tensioner, didnt think about it. That and a set of coilovers is a job for next time.
:thumbsup

[danewilson77]

^nice work right there.

HTC Thunderbolt+TT

[jayjay_dee]

With some help from my cousin, we installed Performance Air Intake...

Also tried the "Lock Beep DIY" but unsuccessful... i first got the 87 dB, not loud enough for me, went back to Radio Shack, replaced it with 90 dB,
wont even work (no sound).... will be heading back to RS first thing tomorrow morning to replace it again....

[danewilson77]

Hmmm.

HTC Thunderbolt+TT

[echo46]

Cooling System Refresh
Fuel Filter
CABs

[danewilson77]

Cooling System Refresh
Fuel Filter
CABs

Well done sir.

HTC Thunderbolt+TT

[echo46]

Danke

[kayger12]

Washed her for the second day in a row...

Droid X. Tapatalk. Use it.

[fricker66]

Full exterior detail. She should be good for several more months.

Paint was in decent shape so went with the following lineup: Menzerna Power Finish, Chemical Guys EZ Creme Glaze, JetSeal 109 and Swissvax Shield.

http://i4.photobucket.com/albums/y111/fricker66/330i%20ZHP/100_5472.jpg

http://i4.photobucket.com/albums/y111/fricker66/330i%20ZHP/100_5475.jpg

http://i4.photobucket.com/albums/y111/fricker66/330i%20ZHP/100_5481.jpg

[edlvrt]

New water pump, expansion tank, thermostat, and coolant. Whoever decided to have those plastic end pieces and retaining clips on all of the hoses vs regular hose clamps needs to be taken out back and beat.... But I guess I won't have to worry about my cooling system for another 80k. Next on the list, A and B pillars and rear shocks...

[ranger]

Bought $770 worth of preventive maintenance parts for a 100,000 ZHP I just purchased. Complete cooling package with radiator, belts and pulleys, plugs, filters, fuel filter, transmission fluid, rear diff fluid, etc. Should be goof for another 100,000 miles.

[llll1l1ll]

Yesterday, I tried to refresh my alcantara wheel. Looks about the same from what I could tell afterward; however, it's significantly less dirty feeling this morning and looks a little more fluffy. A lot of the fabric seems to have worn away, though... :/

[cakM3]

I replaced my faulty hood switch this morning!

Now I no longer have false alarms :biggrin

[danewilson77]

I replaced my faulty hood switch this morning!

Now I no longer have false alarms :biggrin

Well done.

HTC Thunderbolt+TT

[johnrando]

Met up with William (wsmeyer), had a few beverages, hung out, replaced my windshield cowl, and talked ZHPs. He has a Saphire Black 6MT Vert and mine is Jet Black STEP Vert, same year, so it was really fun comparing the cars. We drove each others, surprisingly similar feel to them. Great time. Thanks William!

[danewilson77]

Met up with William (wsmeyer), had a few beverages, hung out, replaced my windshield cowl, and talked ZHPs. He has a Saphire Black 6MT Vert and mine is Jet Black STEP Vert, same year, so it was really fun comparing the cars. We drove each others, surprisingly similar feel to them. Great time. Thanks William!

All about quality time with the family.

HTC Thunderbolt+TT

[Marcus-SanDiego]

Met up with William (wsmeyer), had a few beverages, hung out, replaced my windshield cowl, and talked ZHPs. He has a Saphire Black 6MT Vert and mine is Jet Black STEP Vert, same year, so it was really fun comparing the cars. We drove each others, surprisingly similar feel to them. Great time. Thanks William!

Cool story. Nice to see family hanging out.

James and I hung out with Albert on Saturday. Went to lunch (awesome Mexican food) and then James and Albert did a Palomar run.

[BlackNTan]

New mats. Bavarian Autosport Ultimate mats. Nice upgrade from the original mats still in the car.

http://i193.photobucket.com/albums/z246/jones205/New-Mats-passenger.jpg

[Marcus-SanDiego]

:like

[danewilson77]

Those look great BNT.

[johnrando]

Really nice looking mats. Nice that you all got to hang out in SD Marcus. I'm having a StealthOne installed as I type, and hardwiring my new (used) ValentineOne for power. The StealthOne displays the Valentine alerts on the NAV screen instead of the detector and you can control it with the steering wheel. Hope it works!

[Marcus-SanDiego]

Good luck, John. Let me know how that turns out. I've always used the V1 for alerts (visual or otherwise).

[johnrando]

Good luck, John. Let me know how that turns out. I've always used the V1 for alerts (visual or otherwise).

Thanks. It appears to work, but I'm not exactly sure how to fully test it other than driving by a LEO with radar, and that might not be for awhile. There are some configuration things I can try, but when the V1 initializes I do see a V1 on my NAV screen. I'll let you know when I come up with something solid.

Also, just installed no-holes front plate bracket. Really like the way it looks.

Tried to install my c/f diffuser, but the fit is off and there is a gap. Not sure I'm going to be able to get rid of the gap so I may be S.O.L. The diffuser is not very pliable so it won't bend quite right to get the tabs in. Too late (a few months) to return it to the person I bought it from.

[Marcus-SanDiego]

Was that diffuser OEM, John?

[johnrando]

No, it wasn't. Couldn't find OEM. bimmian is the only ones I know who have "good ones" even for sale and they are out of stock. I have no idea what brand this one is.

[Marcus-SanDiego]

Oh ok. I know that Keith has a BMW Performance diffuser on his. Fits perfectly.

[danewilson77]

Oh ok. I know that Keith has a BMW Performance diffuser on his. Fits perfectly.

Who's Keith? You mean Kewiliki?

HTC Thunderbolt+TT

[lilcdkey]

Who's Keith? You mean Kewiliki?

HTC Thunderbolt+TT

:rofl

I gave mine a bath.

[danewilson77]

:rofl

I gave mine a bath.

Meeeee 2.

HTC Thunderbolt+TT

[az3579]

:rofl

I gave mine a bath.

Mine's getting a bath right now. No elbow grease required, courtesy of mother nature.

[Marcus-SanDiego]

Who's Keith? You mean Kewiliki?

HTC Thunderbolt+TT

:hawaiian

[kayger12]

Kewiliki-- it's a little known fact that my name is Greek for, "getting his ass kicked at work and buried in several hundred unread threads."
http://www.untoldentertainment.com/blog/img/2009_12_30/cliffClavin.jpg

[Marcus-SanDiego]

KG, how many unread threads? hehehe.