What did you do for your ZHP/BMW today?

[Stu]

wow why do we have such different sets on our cars?? I have 22A and 20A on mine as those are what matched up closest to my stock wipers. 19" might have worked for the pass side one too, as the end of the 20 is right near the edge of the window. The spoiler on each wiper is facing the right direction too.

I'm pretty sure I got 19Bs, but I can't remember. I definitely know I got the B's, though. It just means they're more curved than the A's, I'm pretty sure it doesn't make any difference. It supposed to conform to more curved windshields better or something like that.

[gr330zhp]

Tranny fluid and filter done on the 740i. Took me about a day and a half -_-


Sent from my iPhone 5.

[zhp43867]

For those wondering about leather steering wheels becoming shiny- sometimes permanently. Don't let anyone touch it who put hand moisturizer on recently, and wipe it down once every week or two with Prestine Clean, LeatherMasters Soft Cleaner, Sonax Leather Foam or Ultima Interior Shampoo.

The oils and salts from your skin build up on the wheel and destroy the leather clear coat in a hurry if you don't.

[Sockethead]

Damn, I knew stealing Kpro's moisturizer was going to catch up to me... :scratchinghead

[webster]

I'm pretty sure I got 19Bs, but I can't remember. I definitely know I got the B's, though. It just means they're more curved than the A's, I'm pretty sure it doesn't make any difference. It supposed to conform to more curved windshields better or something like that.

on ECS' website the Bosch Icon set says 422B/419B

[Torxuvin]

Finally passed emissions and got my tag! Lol

[Ryans323i]

Damn, I knew stealing Kpro's moisturizer was going to catch up to me... :scratchinghead

Oh you like it. You're willing to deal with the consequences.

Although, I guess this why my steering wheel looks like crap.

[zhp43867]

Oh you like it. You're willing to deal with the consequences.

Although, I guess this why my steering wheel looks like crap.

:santa1 Nice. Yes when others drive my car, no hand lotion is the primary rule. No food is the second rule! Some hand lotion is okay, some is- very not okay and can stain interior surfaces- just like sunscreen.


Finally passed emissions and got my tag! Lol

Congrats!

[RITmusic2k]

Replaced my battery yesterday; I took the old one to the absolute limits of its lifespan; actually had to bump-start the car to leave work and head to Pep Boys. Thank god for manual transmissions.

[nike001]

Switched my BMW performance knob out for my old ZHP one. Trying to get the hang of that again so I can decide if I want the F10 M5 illuminated one...

It's like a freaking rock at the top of the shift knob!

[az3579]

Dropped off Wobz to get fixed. Got a loaner, and it ain't no Dodge Caliber. :)


:santa1 Nice. Nobody drives my car is the primary rule.

Fixed. :shifty

[cakM3]

In other words, BP got another BMW for a loaner....nice....

I learned from a good friend of mine (watching my place this week while I'm on travel for work) that my MTec II rear carbon fiber diffuser arrived today....it has been safely tucked inside my apartment waiting for my return... :)

Thanks John! :thumbsup

[MrMaico]

Switched my BMW performance knob out for my old ZHP one. Trying to get the hang of that again so I can decide if I want the F10 M5 illuminated one...

It's like a freaking rock at the top of the shift knob!

I removed my Alcantara wrapped (by deadlysyns from M3forum) ZHP knob for my new F10 lit one last week and was surprised how much less the wrapped one weighed, I'd guess at least 1/2, maybe even 1/3 the weight of the new one. No idea if he removed a bunch of weight to be able to wrap it or what. I don't recall noticing the difference when I installed it but I was amazed at how much different shifting feels now with the heavier knob......it just feels less notchy with the added momentum of the heavier knob. Never would have guessed it would make that much difference. I LIKE IT!

Barry

[zhp43867]

Dropped off Wobz to get fixed. Got a loaner, and it ain't no Dodge Caliber. :)



Fixed. :shifty

Haha!

[Hornung418]

My parts for my MS43 DME conversion came in yesterday :)

I need to make a few wiring harnesses but everything is in good knick. Hopefully it goes smoothly!

From a GS3, this was sent.

[az3579]

Betcha this would make Dane hot.
Gotcha beat, buddy.

http://i200.photobucket.com/albums/aa192/az3579/Misc/95EE6EFC-ED80-4AAF-BE57-66F6ECE91B80-6264-0000094383E59EFB.jpg


Sent from my iPhone 4S from Tapatalk

[Torxuvin]

^^ Wow. I'm impressed

[jack.chris328]

Daaanng, Nice! Perfectly broken in. :thumbup

[danewilson77]

Not his car fella's. He's posing.

I'm sure I still have 30k miles on you BP.

[Johal E32]

Betcha this would make Dane hot.
Gotcha beat, buddy.

http://i200.photobucket.com/albums/aa192/az3579/Misc/95EE6EFC-ED80-4AAF-BE57-66F6ECE91B80-6264-0000094383E59EFB.jpg


Sent from my iPhone 4S from Tapatalk

That is an E39 instrument cluster. Isn't it ;) ?

[Stu]

Not my ZHP, but my family's other cars:

Cleaned the sap off the Subaru. I have the biggest blister on my thumb. I've never had a harder cleaning job than that. Little black dots were all over the place on it. ScratchX and an incredible amount of elbow grease got it off. But ouch, that hurt. Gave it a good wash and it's good and shiny now.

Tested my dad's battery on the G37X since it seemed to struggle to start. It's definitely about dead, doesn't seem to want to hold a charge no matter the amount of driving. I advised him of this.

I fixed the windshield wiper position on his car as well. The driver's home position was way, way off. A large portion of the windshield was not being wiped due to how low the home position was. I'm guessing this is because the windshield was replaced at some point in its life and the windshield guy put the wipers on in the wrong position - not uncommon of them to do. I thought this was a safety issue, so I re-positioned it to give much more visibility. I must say, the wiper arms are TONS easier to deal with than BMW's shoddy design.

When I get bored, I start fixing other peoples' cars.... :)

[alexandre]

Replaced my battery yesterday; I took the old one to the absolute limits of its lifespan; actually had to bump-start the car to leave work and head to Pep Boys. Thank god for manual transmissions.

I did the same in September :D

On another hand... I got an email notification for this thread today. Will be able to confirm when someone replies to this!

[danewilson77]

I did the same in September :D

On another hand... I got an email notification for this thread today. Will be able to confirm when someone replies to this!

Replied.

Sent from Williamsburg, VA USA

[midlandtech]

When I get bored, I start fixing other peoples' cars.... :)

Oh really? Wanna come to KC next time ya get bored?


~Steve
Sent from my iPhone using Tapatalk

[alexandre]

Replied.

Sent from Williamsburg, VA USA

Got the thread reply notification. Sweet!

[az3579]

That is an E39 instrument cluster. Isn't it ;) ?

Sssssshhhhhhhhhhhh... :ninja


Not his car fella's. He's posing.

I'm sure I still have 30k miles on you BP.

You always will, because you work so far away from home!
If you worked 7 miles from your house, I'd have you sooooo beat! :biggrin

[Johal E32]

^HAHA

I knew it!

I noticed the MPG gauge was familiar (my dad drives an E39), yet it was different to the E46 instrument cluster!

[az3579]

^^ Another dead giveaway are the perfectly round gauges. E46's have cut-off bottoms.


Honestly I'm just shocked that the display on this one isn't pixelated to death.

[Johal E32]

^^ Another dead giveaway are the perfectly round gauges. E46's have cut-off bottoms.


Honestly I'm just shocked that the display on this one isn't pixelated to death.

They have probably been changed at some point. If the pixels were to go out on my E39 I would be probably change them ASAP. Little things like that annoy me.

[alexandre]

They have probably been changed at some point. If the pixels were to go out on my E39 I would be probably change them ASAP. Little things like that annoy me.

If it's a late E39 they probably got upgraded displays like the E46... I noticed pretty much no E46 seems to have dead pixels, especially compared to the E36's, I have 211k and mine look brand new.

Dat mileage though :thumbsup

EDIT: Probably this guy. Pretty crazy! http://forums.bimmerforums.com/forum/showthread.php?p=25078086

[SoCalZman]

man, E39s are tough cars.

[az3579]

This one is a 10/99 build. The pixels are FUBAR on the radio though.

E39's are stupidly tough. I see beat up E39's driving around Bridgeport all the time, and given the way they appeared to be treated, it's amazing that they still run.


Sent from my iPhone 4S from Tapatalk

[terraphantm]

They have probably been changed at some point. If the pixels were to go out on my E39 I would be probably change them ASAP. Little things like that annoy me.

I thought it was only the "high" clusters that get the dead pixels

[zhpnsnv]

Dropped off Wobz to get fixed. Got a loaner, and it ain't no Dodge Caliber. :)



Fixed. :shifty

Hey don't knock the caliber. Driving one right now. I'm amazed by it for a couple of reasons:

1. Somehow they managed to make a generally small car feel like you're driving a small island nation.

2. It has manual climate control!!!!! Amazing!!!!! Stupid BMW can't figure this one out!


Sent from the freaking Catalina wine mixer.

[Torxuvin]

Ordered Fcabs, a drive belt, some orings, floor mats, and the front license plate delete

[Torxuvin]

Hey don't knock the caliber. Driving one right now. I'm amazed by it for a couple of reasons:

1. Somehow they managed to make a generally small car feel like you're driving a small island nation.

2. It has manual climate control!!!!! Amazing!!!!! Stupid BMW can't figure this one out!


Sent from the freaking Catalina wine mixer.

1) Agree completely

Btw nice wine mixer ;)

[Newjack]

Hey don't knock the caliber. Driving one right now. I'm amazed by it for a couple of reasons:

1. Somehow they managed to make a generally small car feel like you're driving a small island nation.

2. It has manual climate control!!!!! Amazing!!!!! Stupid BMW can't figure this one out!


Sent from the freaking Catalina wine mixer.

Unfortunately for the caliber, that's about where the pros end. Merging onto a highway is like the tetris world championship.

Sent from my VS910 4G using Tapatalk 2

[Hermes]

2. It has manual climate control!!!!! Amazing!!!!! Stupid BMW can't figure this one out!

you jelly?

http://i29.photobucket.com/albums/c288/jhermes/320i/P1050761.jpg

[nike001]

This one is a 10/99 build. The pixels are FUBAR on the radio though.

E39's are stupidly tough. I see beat up E39's driving around Bridgeport all the time, and given the way they appeared to be treated, it's amazing that they still run.


Sent from my iPhone 4S from Tapatalk

I think they were a problem on the later models. I had a 97 and didn't have any dead pixels.

I beat the ever loving shit out of that car too. I miss it

[Hornung418]

Crestwood has manual HVAC controls in his e46xi...

[Rovert]

I took my girl out to a full redline uphill in 2nd and 3rd and into 4th to keep ahead of an older Supra...LOL. Car had a slightly orgasmic experience as she cleared her pipes and sent a pulsing adrenaline rush down my spine. :D Ooooo..it was good for both of us. I hope this is not NWS. LOL

[az3579]

Hey don't knock the caliber. Driving one right now. I'm amazed by it for a couple of reasons:

1. Somehow they managed to make a generally small car feel like you're driving a small island nation.

2. It has manual climate control!!!!! Amazing!!!!! Stupid BMW can't figure this one out!


Sent from the freaking Catalina wine mixer.

I won't knock the Caliber for its spaciousness, but... let's face it, it's ugly. And it's slow. And it has no soul (though it does a little bit of character, which is important). I'm sure it's a fine car to live with, but it sure isn't a bank vault like the E39 is. This thing is beyond solid; it's pretty much driving a Swiss vault full of cash and armed security guards standing outside.

And BTW; all BMWs have manually adjustable climate control, regardless of whether it has an "Auto" button.


Unfortunately for the caliber, that's about where the pros end. Merging onto a highway is like the tetris world championship.

Sent from my VS910 4G using Tapatalk 2

Dude, you literally had me almost falling out of my chair laughing with that comment! :rofl


I think they were a problem on the later models. I had a 97 and didn't have any dead pixels.

I beat the ever loving shit out of that car too. I miss it

My brother's '97 540i had dead pixels all over the friggin' place. It's an issue that affects all E39's. Another friend of mine had an E39 525i, 2001; did the same thing. His current '01 M5 has dead pixels as well.

Seeing an E39 with all working pixels is kind of like seeing an E39 with cupholders that function (not that they're functional in any way); it just doesn't happen very often.

These are stupid little issues, just like every car has its quirks. Otherwise, the interior is solid as hell; doors require effort to pull shut because they're so thick and solid. The trim is solid. Best of all, it's got a durable-as-hell engine that still has some very good pull despite 318k.

If I could choose a rental car from a rental car agency, I would probably spring for the Kia Optima again; I was impressed by that car for some weird reason. It's got character, it drives pretty well, and definitely handles corners better than my mom's lighter also-FWD Nissan Sentra.
And 6-speed auto gearbox with manually selectable gears is important also...

But anyway, back on topic.
The ZHP should be getting a new fuel filter installed today and I think the shocks are going in, though probably not finished today. I can only imagine what the progress is, but it's going to be a hefty bill. I got the estimate emailed to me... ouch. That's with steeeeeeeep discounts on parts and labor, which is why there are no complaints from me! I really like the work he does.

[zhpnsnv]

Wait did you guys think I was being serious about liking the caliber? I'm losing my touch. I DO wish a BMW could come with manual climate though.

But in all it is a despicable car.


Sent from the freaking Catalina wine mixer.

[danewilson77]

Ha. Someone else trolling.....:)

[az3579]

http://resnarkable.com/wp-content/uploads/2012/03/trollers_gonna_troll-1024x924.jpg

[nike001]

Seeing an E39 with all working pixels is kind of like seeing an E39 with cupholders that function (not that they're functional in any way); it just doesn't happen very often.

These are stupid little issues, just like every car has its quirks. Otherwise, the interior is solid as hell; doors require effort to pull shut because they're so thick and solid. The trim is solid. Best of all, it's got a durable-as-hell engine that still has some very good pull despite 318k.


I guess I got a gem then. Mine had working cupholders... but in the hands of a 16 y/o with friends in and out all the time, they only lasted about a year.. :rofl

[Johal E32]

My pop's old 2000 528/5 had perfect pixels and cup-holders.

Well the cup-holders were good, the day after we bought it one of them broke :rofl

The 528 my dad was one MINT e39, it was practically new. Bought it off the original owner too.. Only downside was they smoked in the car :/

[zhp43867]

I guess I got a gem then. Mine had working cupholders... but in the hands of a 16 y/o with friends in and out all the time, they only lasted about a year.. :rofl

They lasted a whole year?! Wow your friends must have actually been pretty respectful! Most 16 year olds would break them in less than a day I'd guess.

[Ryans323i]

http://resnarkable.com/wp-content/uploads/2012/03/trollers_gonna_troll-1024x924.jpg

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcSbu0KLMb7_qmDadDcwx4wMunBeMbEa6 0A2kFgnkJII7_nrkkX31Q

[webster]

yesterday i got an oil change and had my shop put in a new washer fluid pump. also had them order some new non-heated washer fluid nozzles. the last oil change was only 3,500 miles but it has been 6 months and with the kind of city driving i do (start/stop, on/off) i am super cautious about the oil.

they also took a look at the sunroof and sure enough the visor is broke off the track and there are plastic pieces all over the place. ordering a sunroof repair kit and hopefully that will do the trick and not have to replace the entire cassette.

we've been getting rain off and on the past week and it looks to continue over the next week and a half or so. as a result my car is going to be filthy as hell. i hate having a dirty car but when the weather is crap not much you can do...

[Pip]

Weather is clearing up so I can finally wash the car. It has been filthy and the wheels are almost gunmetal grey :( This weekend should be beautiful in CA though :thumbsup

[nike001]

They lasted a whole year?! Wow your friends must have actually been pretty respectful! Most 16 year olds would break them in less than a day I'd guess.

Yeah they lasted pretty long. Although I was never big on drinks in the car.

I think it was one of those super sized slushie cups that broke them :rofl

[cakM3]

Started another project for my ZHP (outlined in my projects thread) ;)

[zhp43867]

yesterday i got an oil change and had my shop put in a new washer fluid pump. also had them order some new non-heated washer fluid nozzles. the last oil change was only 3,500 miles but it has been 6 months and with the kind of city driving i do (start/stop, on/off) i am super cautious about the oil.


Do you have the old oil? Get it analyzed! Then you can know based on their recommendation whether or not you do need to change the oil so often.


Started another project for my ZHP (outlined in my projects thread) ;)

Shameless spam. :shifty

[cakM3]

Shameless spam. :shifty

Yeah I suppose....just catching up on all threads...

[danewilson77]

Yeah I suppose....just catching up on all threads...

That could also almost be considered a pic (SB) of your ZHP Charlie.

[Torxuvin]

Cleaned MAF, checked sways, ps fluid, brake fluid, oil, air filter, projector bowls, instrument cluster test, and determined source of blown speaker.

Oh and my oil pressure sender went out on the vette. :(

Tomorrow, I'm cleaning the Alcantara seats, carpets, and fixing said blown speaker.

[alexandre]

Noticed my gas level gauge was acting weird this evening... Jumping between full and 3/4. Anyone ever had this problem ? Do you have to pull the gas tank to replace the sender(s)?

[Torxuvin]

Noticed my gas level gauge was acting weird this evening... Jumping between full and 3/4. Anyone ever had this problem ? Do you have to pull the gas tank to replace the sender(s)?

I haven't in a BMW, but I have in other cars. What gas do you use? I ran a bottle of techron (fuel system cleaner) through and started using better gas. No more problems

[Johal E32]

my car is making a funny noise.. I am guessing one of the spark plugs backed out a few threads? Am I on point here?

It is almost like a squealing noise at certain rpms, except it isn't. The performance and everything is fine. It just sounds weird and louder at idle for some reason..

My ngk's are only 4 months old btw. Any other ideas? It's not a pulley, or tensioner, I know this for sure. And I also read to check my air box, that is also bueno!

well, after talking to Dalton and my cousin.. It seems like something might have fired my alternator bearings, or AC clutch.

DIY time this weekend. should be fun..

here is a video for reference..

http://www.youtube.com/watch?v=-E1Us6SNgL4&feature=plcp

[alexandre]

I haven't in a BMW, but I have in other cars. What gas do you use? I ran a bottle of techron (fuel system cleaner) through and started using better gas. No more problems

Been filling up with V-Power since I bought the car 6 months ago... and ran Techron in August, about 3k ago.

[Hermes]

I buy cases of Techron from Costco and either fill with Chevron or Shell... occasionally Mobil but only if I can't find the two previously mentioned ones


oh yeah, I will also buy 100 octane race gas on occasion from VP

[zhp43867]

Yeah I suppose....just catching up on all threads...

I was just messin' :santa2


Been filling up with V-Power since I bought the car 6 months ago... and ran Techron in August, about 3k ago.

Then I don't think gas is your problem... V Power is quite good. Do you have a dent in the tank? Maybe that could effect it. One of the E30s does and it makes the gas gauge act bi-polar!

[Johal E32]

Since we are talking about gas.. I always use Shell V-power. The good stuff :)

Unfortunately in cali that means the v-power is only 91 not 93 octane..

[alexandre]

Since we are talking about gas.. I always use Shell V-power. The good stuff :)

Unfortunately in cali that means the v-power is only 91 not 93 octane..

In QC too. But at least it's 0% ethanol :)


I was just messin' :santa2

Then I don't think gas is your problem... V Power is quite good. Do you have a dent in the tank? Maybe that could effect it. One of the E30s does and it makes the gas gauge act bi-polar!

Yeah I didn't think either... and no dent unless I could have one without smelling/losing gas ?

[BCAN]

Missed her :( I'm in Charleston for my sister's wedding and I've seen all kinds of fantastic cars, but no ZHPs. Plenty of E46s though, including a beautiful M3. And an amazing Royal Red E39 M5 with powdercoated black wheels.
It's only been a day and all I want to do is drive my car!

[JKO_ZHP]

Will need to wash/clay/wax the ZHP later after classes. Huge MFEST & overall, BMW/Euro meet at a local plaza.
Ordered an MFEST windshield decal, not 'cause I've been to MFEST because I haven't. But because it'd be nice to meet random people who notice it :)
Dane, thanks for the BMWMafia.com decals. But I won't be putting those on....no offense but it just sounds corny or cheesy. I'd rather have something that is more specific, like ZHPMafia.com or just ZHPMafia.

I had an E46Fanatics.com decal somewhere a while ago, can't find it anymore. I think I burned it at work a while ago or flushed it down the toilet, not sure.

[static667]

Looking for yet another replacement engine. The fourth one that I've received is not useable, as well. This is getting really old.

[johnrando]

Will need to wash/clay/wax the ZHP later after classes. Huge MFEST & overall, BMW/Euro meet at a local plaza.
Ordered an MFEST windshield decal, not 'cause I've been to MFEST because I haven't. But because it'd be nice to meet random people who notice it :)
Dane, thanks for the BMWMafia.com decals. But I won't be putting those on....no offense but it just sounds corny or cheesy. I'd rather have something that is more specific, like ZHPMafia.com or just ZHPMafia.

I had an E46Fanatics.com decal somewhere a while ago, can't find it anymore. I think I burned it at work a while ago or flushed it down the toilet, not sure.

lol

[webster]

Looking for yet another replacement engine. The fourth one that I've received is not useable, as well. This is getting really old.

whaaaa??

[alexandre]

Looking for yet another replacement engine. The fourth one that I've received is not useable, as well. This is getting really old.

Are you looking for ZHP engines or regular 3L's ? If you absolutely want a ZHP engine you find a decent 3L and swap the cams later on...

Have all these companies refunded you for all costs ? Back-and-forth shipping, 4 installations (if you don't DIY) etc.

http://www.ebay.ca/itm/190751787594 Also I found this... Looks decent. Seller has good feedback. It's 500 mi away from my home otherwise I would've driven over to have a look for you. Even if it's in Canada shipping quotes should be similar to something shipping out of Buffalo, NY as that city is about 100 mi from Cambridge (where the engine is located).

[nike001]

Will need to wash/clay/wax the ZHP later after classes. Huge MFEST & overall, BMW/Euro meet at a local plaza.
Ordered an MFEST windshield decal, not 'cause I've been to MFEST because I haven't. But because it'd be nice to meet random people who notice it :)
Dane, thanks for the BMWMafia.com decals. But I won't be putting those on....no offense but it just sounds corny or cheesy. I'd rather have something that is more specific, like ZHPMafia.com or just ZHPMafia.

You'll definitely catch some flack for having an mfest sticker since your car isn't an M.


Looking for yet another replacement engine. The fourth one that I've received is not useable, as well. This is getting really old.

Deets?

[johnrando]

I don't know, Albert rocks an Mfest sticker on his car when he goes and I don't think he catches any.

[danewilson77]

No one would catch any grief here for sure.

Sent from Williamsburg, VA USA

[Torxuvin]

my car is making a funny noise.. I am guessing one of the spark plugs backed out a few threads? Am I on point here?

It is almost like a squealing noise at certain rpms, except it isn't. The performance and everything is fine. It just sounds weird and louder at idle for some reason..

My ngk's are only 4 months old btw. Any other ideas? It's not a pulley, or tensioner, I know this for sure. And I also read to check my air box, that is also bueno!

well, after talking to Dalton and my cousin.. It seems like something might have fired my alternator bearings, or AC clutch.

DIY time this weekend. should be fun..

here is a video for reference..

http://www.youtube.com/watch?v=-E1Us6SNgL4&feature=plcp

WTF? Definitely does not sound right.

[Ryans323i]

No one would catch any grief here for sure.

Sent from Williamsburg, VA USA

+1 I have stripes on a 323 and nobody says sheeeet.

[Mtnman]

You have stripes? I thought those were power-bands. Damn. :shift

[danewilson77]

Full interior / exterior detail.

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG2006-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG2003-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG2000-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG1997-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG1993-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG1992-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG1991-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG1990-1.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Funny/me_gusta_by_dezzlow-d3dvgex.jpg

[alexandre]

:drool

What do you use for the seats apart from magic eraser ?

[johnrando]

Looks good DW, but the pics don't do it justice. I know first hand just how groovy your car is.

And Ryan, we LOVE your stripes!

[Ryans323i]

You have stripes? I thought those were power-bands. Damn. :shift

It's actually kinetic tape! :shifty



@Dane: I agree with JR, pics don't do her justice. Great work! BTW, how are the shifter & ebrake boots holding up?

[Sockethead]

And you still diggin that shifter knob?

[danewilson77]

:drool

What do you use for the seats apart from magic eraser ?

I use the BMW Alcantara cleaner.

[danewilson77]

It's actually kinetic tape! :shifty



@Dane: I agree with JR, pics don't do her justice. Great work! BTW, how are the shifter & ebrake boots holding up?


And you still diggin that shifter knob?

I am extremely happy with both. Thanks again guys/gals.

[static667]

Are you looking for ZHP engines or regular 3L's ? If you absolutely want a ZHP engine you find a decent 3L and swap the cams later on...

Have all these companies refunded you for all costs ? Back-and-forth shipping, 4 installations (if you don't DIY) etc.

http://www.ebay.ca/itm/190751787594 Also I found this... Looks decent. Seller has good feedback. It's 500 mi away from my home otherwise I would've driven over to have a look for you. Even if it's in Canada shipping quotes should be similar to something shipping out of Buffalo, NY as that city is about 100 mi from Cambridge (where the engine is located).

I'm going to pick up my next one in person. No more orders and deliveries. The first engine I got wrong was fully installed before I knew it was a 2.5 liter. All subsequent engines were rejected before install.

Sent from my yet to be hacked GS3.

[Torxuvin]

Interior update (shift knob and ebrake handle) Cleaned the alcantara some. I can't see the carpet well enough to clean it. I need to wait for a sunny day.

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/61314_761531393264_2107821349_n.jpg

What would you guys suggest to clean the steering wheel? Leather cleaner?

[nike001]

leatherique

[imola red zhp]

My IRZ is good for another year
6518


Sent from dennis' iPad using Tapatalk HD

[zhp43867]

Interior update (shift knob and ebrake handle) Cleaned the alcantara some. I can't see the carpet well enough to clean it. I need to wait for a sunny day.

http://sphotos-a.xx.fbcdn.net/hphotos-prn1/61314_761531393264_2107821349_n.jpg

What would you guys suggest to clean the steering wheel? Leather cleaner?

Sonax leather foam for an all in one. Good stuff.

Leather Masters strong for rough cleaning, soft for gentler cleaning. Top it off with their protection cream to return that new feel to the wheel. Just the right amount of grip.

Leatherique is a great alternative, but its a bit of a mess so I stopped using it. Prestine Clean is great on its own though.

I have some Sonax and some Leather Masters before and afters if you'd like pictures.

[Johal E32]

WTF? Definitely does not sound right.

yep.. My cousin is coming over today after work and we are going to diagnose/ figure out what it is..

Although, Im positive it's the alternator bearings..

[JKO_ZHP]

Finally got my hands dirty for once and did something myself: replaced the air filter in the intake.
$55 for the OEM air filter.
Plus, washed the wheels, washed everything, wiped down the insides of the windows with Invisible Glass, and Rain-X'd all the glass except for the moonroof.
Then used some kind of Meguiar's blemish/scratch/paint correction on the hood and trunk. Then waxed.
Ready for the local MFEST meet tonight. :)

http://25.media.tumblr.com/dffad68cbd79b95e291602469a4f1cc6/tumblr_meot8lCJmb1r2z3guo2_1280.jpg

http://24.media.tumblr.com/f59ed70fa3cc72b506da9d087574fc53/tumblr_meot8lCJmb1r2z3guo4_1280.jpg

Also, found a ZHP group on Facebook but I don't recognize anyone. The guy who started it though, name's Chris and said that was his username here on the site.
Anyone know him? I've never seen a "Chris" post anywhere here in the couple months I've been on here...

[das boots]

There is Jack.Chris......could be him.

[Jon D]

I actually had the opportunity to drive my vert today for the first time in a month.


Sent from my iPad using Tapatalk HD

[JKO_ZHP]

There is Jack.Chris......could be him.

Doesn't sound familiar. Inactive?
By now I can either recite the top 20 posters and even some (real) names but I don't remember him.

EDIT: Nope, said it's just Chris.
Meh

[das boots]

You are right...I do not recall simply 'Chris'.

[JKO_ZHP]

You are right...I do not recall simply 'Chris'.

I don't know if I've ever mentioned this.....but your username is either universal or you're everywhere.
I've played games like Day of Defeat: Source, Modern Warfare 1&2, etc. and there's always a das boots around once in a while.

[das boots]

LOL. Thanks for the compliment...but...not me. I'm way too old or should I say advance stage. A few years short of retirement age. My reactions are not as what they used to be.....had even to give up on driving competition. Just be an instructor. And even that, is beginning to kick my butt.....LOL. But seriously, I have been using my call sign when I was given that since 1988 when I was still active Navy and also started joining BMW club sites.

[Hornung418]

Could be hokiezhp...

From a GS3, this was sent.

[Johal E32]

I started my car with both of the belts un attached, as I suspecting the noise of dying cats went away. That means my alternator is KAPUT..

About one hour in of pulling out the alternator.. I literally just need to unbolt and disconnect it at this point. I'll wait until the new one is here.

I am going with a 120A Bosch reman from authausaz for $193..

Here are some obligatory pictures..

http://farm9.staticflickr.com/8080/8253230027_a8a6dd1652_b.jpg


I did not trust driving the E46 today (I knew it would break down), so I took my dad's E39. I backed it in on campus today, and it looks like a few other people copied me :rofl

http://farm9.staticflickr.com/8200/8254304660_9641a43e35_b.jpg

P.s ~ That brown Lexus is a 1992 w/ only 52k original miles!! Been owned since new by the same family too! It's a very comfy car to ride in, a great highway cruiser.

The 1985? Landcruiser is pretty mint too
The 325i is a SULEV :shifty

And the E39 is my dad's ;)

[johnrando]

Yes, hokiezhp is Chris, but he would have invited us to his FB group (or we'd kick his ass), so it couldn't be him, right? :shifty

Dying to know who it is.

[JKO_ZHP]

I was explaining to the group that I could try and help them gain membership by forwarding their messages to someone here. A couple messages back and forth and he says he knows how it's like, cause he's a member.
And I ask for his username, thinking it'd be someone I know who actively posts.
But guess not. Maybe he's bluffing, idk. Meh

[az3579]

I have some Sonax and some Leather Masters before and afters if you'd like pictures.

Could you please? I've been using Magic Eraser on my leather wheel but it only makes it look new for about a day, and doesn't "feel" any better. I need a new product, and don't want to buy something, use it once, and have it sit because I don't like it. Sounds to me like the Sonax would be my choice based on your description, but if you post pics then that would most definitely help. :)

[cakM3]

updated my projects thread ;)

[328ioc]

http://i1015.photobucket.com/albums/af278/nicee46/2004%20Imola%20DSLR/IMAG1990-1.jpg

Car looks damn sexy.

Also I have the same tool bag.....but it holds me detailing goodies. :thumbup:

Sent from my DROID RAZR using Tapatalk 2

[danewilson77]

Thanks Sir.

[Johal E32]

Okay, I am changing the idler pulley and tensioner pulley as well just in case. I know its the alternator, but since I'm down there. Why not..?

Do I have the hydro or mechanical? It was pretty hard to take off the main belt ( a lot of resistance), which makes me think hydro. Yet, the hydro tensioner would be obvious, which makes me think I have the mechanical?

I just want to change the pulley, can anyone confirm if I have the hydro or mechanical?

here are the pictures, sorry, this is the best I could do..

Thanks in advance

http://farm9.staticflickr.com/8477/8256023084_08284cdd66_b.jpg

http://farm9.staticflickr.com/8204/8256022246_e4568f5e48_b.jpg

http://farm9.staticflickr.com/8058/8256021208_5015551d49_b.jpg

http://farm9.staticflickr.com/8216/8254948205_8a94ebe919_b.jpg

http://i1015.photobucket.com/albums/af278/nicee46/Maintenance%20and%20Misc/e46beltdiagram.png

^ According to this picture, I want to change the idler pulley and the tensioner underneath it.

[danewilson77]

I think you have hydraulic, but it's tough to see. Do you see the piston?

Why is your coolant hose bulging like that?

Sent from Williamsburg, VA USA

[Johal E32]

I see the piston. Thanks for the response, Dane.

Authaus ~ $333 for a reman. Bosch Alternator, new idler pulley (OEM), and a the hydro tensioner pulley (OEM).

I get $100 back if I send them my old alternator. So the parts are really ~$233

Coolant hose is fine. It's 14 months old, the picture distorted it for some reason..

[danewilson77]

O. K.

Sent from Williamsburg, VA USA

[ryankokesh]

Winters went on today. Not that I need them yet, which is strange, but I was getting tired of waiting for winter to kick in.

http://i.imgur.com/j3XzN.jpg


Sent from my iPhone using Tapatalk

[nike001]

^I was thinking today if I'm even going to need my winters this season. I put them on a while ago but it hardly seems worth it so far..

[danewilson77]

Winters went on today. Not that I need them yet, which is strange, but I was getting tired of waiting for winter to kick in.

http://i.imgur.com/j3XzN.jpg


Sent from my iPhone using Tapatalk

Looks awesome

[UdubBadger]

Winters went on today. Not that I need them yet, which is strange, but I was getting tired of waiting for winter to kick in.

http://i.imgur.com/j3XzN.jpg


Sent from my iPhone using Tapatalk

U recoat them ?


- Goin' H.A.M. Mobile

[midlandtech]

Winters went on today. Not that I need them yet, which is strange, but I was getting tired of waiting for winter to kick in.

http://i.imgur.com/j3XzN.jpg


Sent from my iPhone using Tapatalk

Wow dude that is a sexy look... Seriously


~Steve
Sent from my iPhone using Tapatalk

[ryankokesh]

Thanks guys. Yeah, I put on a couple more thick coats, Seth. Didn't seem to make much of a difference though.


Sent from my iPhone using Tapatalk

[johnrando]

Yeah, those are really good looking winter wheels.

[ryankokesh]

^I was thinking today if I'm even going to need my winters this season. I put them on a while ago but it hardly seems worth it so far..

Lame winter so far...


Sent from my iPhone using Tapatalk

[ryankokesh]

Yeah, those are really good looking winter wheels.

They're the cheapo tire rack ones :)


Sent from my iPhone using Tapatalk

[wsmeyer]

Winters went on today. Not that I need them yet, which is strange, but I was getting tired of waiting for winter to kick in.

http://i.imgur.com/j3XzN.jpg


Those are much nicer than your typical winter setup but what caught my eye is the rotor, you sure those are on the correct side?

William.

[UdubBadger]

Thanks guys. Yeah, I put on a couple more thick coats, Seth. Didn't seem to make much of a difference though.


Sent from my iPhone using Tapatalk

Yeah mine needed a few more on the inner sides of the spokes. Helped a lot, gotta go thick.

#thatswhatshesaid


- Goin' H.A.M. Mobile

[ryankokesh]

Yeah, I even did one spoke again today, lol. My coats definitely weren't thick enough last time.

I think the rotors are correct. I've been told it doesn't make a difference performance-wise, but I think generally the curves point towards the front of the car :dunno


Sent from my iPhone using Tapatalk

[UdubBadger]

Thanks guys. Yeah, I put on a couple more thick coats, Seth. Didn't seem to make much of a difference though.


Sent from my iPhone using Tapatalk

Yeah mine needed a few more on the inner sides of the spokes. Helped a lot, gotta go thick.

#thatswhatshesaid


- Goin' H.A.M. Mobile

[cakM3]

This has been absolutely crazy....tonight I just sourced a full UUC TS3E exhaust for $750. Dammit BP!!! Been riding Wobbie way too much....fell in love with this exhaust and now I'm getting this just after the holidays...;)

[az3579]

This has been absolutely crazy....tonight I just sourced a full UUC TS3E exhaust for $750. Dammit BP!!! Been riding Wobbie way too much....fell in love with this exhaust and now I'm getting this just after the holidays...;)

smh

Gotta copy me, eh? :biggrin

[cakM3]

Hey what can I say ;) Awesome exhaust....you knew it was going to happen :)

When I get this should I keep my OE exhaust or sell it??? Maybe give it away??? What to do.....:scratchinghead

[UdubBadger]

This has been absolutely crazy....tonight I just sourced a full UUC TS3E exhaust for $750. Dammit BP!!! Been riding Wobbie way too much....fell in love with this exhaust and now I'm getting this just after the holidays...;)

Not to be a party pooper but you coulda had mine for $400 and spent $100 on just having your resonators replaced which would be a full tse3


- Goin' H.A.M. Mobile

[JKO_ZHP]

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/577769_4904367368057_18906095_n.jpg

Noticed the passenger fog wasn't on in the reflection at a shop's window. I pull over and try turning everything off then on, etc. but it just won't turn on. Doesn't even flicker.

No lights appear on the dash.

More problems right after the fix just last week.....and I just put on the clear reflectors on today, broke both ambers taking them off and the passenger reflector broke in half.

Very bad timing. I don't have time to deal with this stuff right now.

[Hornung418]

Are they OEM? Just change the bulbs.

[danewilson77]

Are they OEM? Just change the bulbs.

Agree. Is there a bigger deal we should know about?

Sent from Williamsburg, VA USA

[Ryans323i]

This has been absolutely crazy....tonight I just sourced a full UUC TS3E exhaust for $750. Dammit BP!!! Been riding Wobbie way too much....fell in love with this exhaust and now I'm getting this just after the holidays...;)

Cool!

[az3579]

Hey what can I say ;) Awesome exhaust....you knew it was going to happen :)

When I get this should I keep my OE exhaust or sell it??? Maybe give it away??? What to do.....:scratchinghead

I've been trying to sell my OEM exhaust for almost a year now. Still sitting in my friend's garage. :shifty
You are Mr. Spare Parts, I can't believe you're even posing this as a question!


http://sphotos-b.xx.fbcdn.net/hphotos-snc7/577769_4904367368057_18906095_n.jpg

Noticed the passenger fog wasn't on in the reflection at a shop's window. I pull over and try turning everything off then on, etc. but it just won't turn on. Doesn't even flicker.

No lights appear on the dash.

More problems right after the fix just last week.....and I just put on the clear reflectors on today, broke both ambers taking them off and the passenger reflector broke in half.

Very bad timing. I don't have time to deal with this stuff right now.

The good thing is that fog lights aren't important. You'll eventually have time to fix it!

P.S. - The display on the instrument cluster will not notify you of fog lights that are out. Mine sometimes doesn't turn on, which I suspect is a ballast, but I have never gotten a notification for it. The only way I'll find out is if I see the lights off another car's reflection.

[Torxuvin]

Sonax leather foam for an all in one. Good stuff.

Leather Masters strong for rough cleaning, soft for gentler cleaning. Top it off with their protection cream to return that new feel to the wheel. Just the right amount of grip.

Leatherique is a great alternative, but its a bit of a mess so I stopped using it. Prestine Clean is great on its own though.

I have some Sonax and some Leather Masters before and afters if you'd like pictures.

Pictures would be great.

I replaced my rear deck speakers. (really yesterday) No more speaker flapping.

[Johal E32]

bought one of these stickers

http://shop.caranddriver.com/store/hfmedia/en_US/DisplayCategoryProductListPage/categoryID.49796200/parentCategoryID.19556100

I am not a fan of stickers on cars, but I am going to rock one of these!

[JupiterBMW]

Pictures would be great.

I replaced my rear deck speakers. (really yesterday) No more speaker flapping.

I too would like to see pictures as I just noticed the leather in the X3 is looking grungy and needs some work...

[JKO_ZHP]

Agree. Is there a bigger deal we should know about?

Sent from Williamsburg, VA USA

I recently replaced my amber reflectors with clear ones, sent from Gary.
Noticed that the passenger one was snapped in half later during the day, at first I thought maybe I had hit a rock on the freeway the other night (unlikely since I didn't feel or hear anything.)

Then the fog light on that side stops working. Or at least, I didn't notice until later yesterday.

Thinking it could've been vandalism or someone tried to steal the reflector....? or fog light? Doesn't make sense and I don't know if the two correlate but it seems too much of a coincidence that the passenger reflector broke and the fog light also all during the same day.

[3ZHP]

I washed the ZHP and the vert and finally put on the Blizzaks.

[danewilson77]

I recently replaced my amber reflectors with clear ones, sent from Gary.
Noticed that the passenger one was snapped in half later during the day, at first I thought maybe I had hit a rock on the freeway the other night (unlikely since I didn't feel or hear anything.)

Then the fog light on that side stops working. Or at least, I didn't notice until later yesterday.

Thinking it could've been vandalism or someone tried to steal the reflector....? or fog light? Doesn't make sense and I don't know if the two correlate but it seems too much of a coincidence that the passenger reflector broke and the fog light also all during the same day.

Yeah... That's cray.

Sent from Williamsburg, VA USA

[zhpnsnv]

bought one of these stickers

http://shop.caranddriver.com/store/hfmedia/en_US/DisplayCategoryProductListPage/categoryID.49796200/parentCategoryID.19556100

I am not a fan of stickers on cars, but I am going to rock one of these!

I'm getting a shirt. Thanks for the link!!!


Sent from the freaking Catalina wine mixer.

[danewilson77]

Pfft. No 6 speed. These are dead to me.

In other news, I removed and cleaned panels in engine bay, and checked torque on spark plugs.

Sent from Williamsburg, VA USA

[UdubBadger]

rained all weekend so i couldn't detail the car like I wanted to but I also have tomorrow off.

[Johal E32]

Pfft. No 6 speed. These are dead to me.

In other news, I removed and cleaned panels in engine bay, and checked torque on spark plugs.

Sent from Williamsburg, VA USA

Eh, they also have the Honda reverse pattern :shifty

I still like them :)

Good call on checking the park plugs, these BMW M5x motors are known for having the spark plugs backing out, then they sound like a diesel..

[derbo]

I got a 80 in a 65 speeding in the zhp..darn it for being so fun...

[Rovert]

Derek you're a danger to society...get off the roads...15 over is just super dangerous in a BMW with handling that goes way past the speed limit. :P

[Crestwood1001]

Guys I need help and I need it quick. Less then a month ago my tensioner pulley failed and took the belt with it. Car did NOT overheat, I heard it and stopped immediately. So now I notice the car takes a long time to warm up (warm being right in the middle of the gauge) and last night pulling in my development I got a low coolant light. Park and it's steaming a bit but never got hot. So I check the coolant and it's a hair low but not to low. Now mind you this was 10pm last night and it's been raining, and I had to be at work early this morning so no good way to check for leaks. Got the low coolant light again this morning, did not get hot and did not steam. It's going to my Indy in the morning cause I just don't have the time to play with it. My first though is the thermostat is bad cause of the heating issues. Now I'm thinkin the expansion tank might be leaking? Any help? No the entire system has not been replaced, water pump has been, pulleys and belts have been, and 105,000 on the clock....


Sent from my iPhone using Tapatalk

[Ryans323i]

bought one of these stickers

http://shop.caranddriver.com/store/hfmedia/en_US/DisplayCategoryProductListPage/categoryID.49796200/parentCategoryID.19556100

I am not a fan of stickers on cars, but I am going to rock one of these!

That's awesome!

[danewilson77]

Guys I need help and I need it quick. Less then a month ago my tensioner pulley failed and took the belt with it. Car did NOT overheat, I heard it and stopped immediately. So now I notice the car takes a long time to warm up (warm being right in the middle of the gauge) and last night pulling in my development I got a low coolant light. Park and it's steaming a bit but never got hot. So I check the coolant and it's a hair low but not to low. Now mind you this was 10pm last night and it's been raining, and I had to be at work early this morning so no good way to check for leaks. Got the low coolant light again this morning, did not get hot and did not steam. It's going to my Indy in the morning cause I just don't have the time to play with it. My first though is the thermostat is bad cause of the heating issues. Now I'm thinkin the expansion tank might be leaking? Any help? No the entire system has not been replaced, water pump has been, pulleys and belts have been, and 105,000 on the clock....


Sent from my iPhone using Tapatalk

Likely coolant expansion tank hairline crack. Have it replaced as well as the upper and lower coolant hoses.

[das boots]

You can do this on your own. If you have a spare vehicle for a couple of days to work on your ZHP. Put the ZHP up on stands. Complete the coolant system replacement that was not done when you did the pump, belts & pulleys.

[derbo]

Derek you're a danger to society...get off the roads...15 over is just super dangerous in a BMW with handling that goes way past the speed limit. :P


oops. haha. I was planning to get a UUC TSE3 to replace the HKS. Looks like that might have to wait. :X

[static667]

Ordered engine number five today. :facepalm

Sent from my yet to be hacked GS3.

[derbo]

Ordered engine number five today. :facepalm

Sent from my yet to be hacked GS3.

:( good luck sir.

[Rovert]

oops. haha. I was planning to get a UUC TSE3 to replace the HKS. Looks like that might have to wait. :X


Damn.... :( When I blew buy a cop on the highway at 110mph in a 60 zone....he warned me not to be driving like a BMW prick...so I knew I had to buy suspension and wheels from that "warning". That's how I justified upgrading...not getting a ticket when getting pulled over. LOL

[ryankokesh]

That is an epic justification :)

[Rovert]

Oh it is! Just speed by a cop or do something illegal in front of them...if they don't get you...spend some money! LOL

[johnrando]

:like lol

[Ryans323i]

:like lol

+1 :rofl

[Crestwood1001]

You can do this on your own. If you have a spare vehicle for a couple of days to work on your ZHP. Put the ZHP up on stands. Complete the coolant system replacement that was not done when you did the pump, belts & pulleys.

I wish I had a spare vehicle and the time, I'm just gonna have to cough up the dough.
Dane, thanks, that's what I figured, gonna have them do the thermostat also


Sent from my iPhone using Tapatalk

[quikryptonite]

I washed the ZHP yesterday evening at 5:30 p.m. because I got home from work and discovered that some bird (although it could've been about 15 birds) absolutely destroyed my car with their waste dumps. I've never seen so much bird poop in one place in my life. I almost always wash my cars by hand, but this was an emergency. Didn't want to take a chance on having it stain my clear coat.

[Vas]

Bought more parts for the zhp. Mod bug has bit me hard.

[az3579]

Picked up Wobz from the shop. She has a shitload of new parts!

Replaced springs with H&R Race springs (same as I had before, only these aren't... collapsed...)
OEM Control Arm Bushings
Strut mounts
Front upper and lower spring pads
Bump stops/dust sleeves
Rear shock mounts and new gaskets
Rear upper and lower spring pads
Front porkchop on the right side
Rear shock mount reinforcement plates
Bilstein Sport shocks
Strut Bearing Seat
Radiator hose

^ all from the receipt

The car drives the same as a brand new M3 at this point. Amazing...

[danewilson77]

You paid to have that done?

[az3579]

You paid to have that done?

Yeah...
The labor was minimal in pricing. The parts totaled over $1400.

[danewilson77]

Damn. So....you dropped an S54 in it? I missed that in the list of parts. Or did you mean it drives like a brand new ZHP?

[az3579]

Damn. So....you dropped an S54 in it? I missed that in the list of parts. Or did you mean it drives like a brand new ZHP?

You're askin' for it, Dane... :p

[danewilson77]

Sorry.:shifty

Cool.

Damn nice when you can do a refresh like that. Enjoy brutha.

I'm going to do CAB's and FSM's over Christmas.

Planned: Euro clears, Silver cube interior, ///M door sills, brakes and tires.

Might be time for me to get some TC Klines by then.

[Hornung418]

What clears do you currently have, Dane? Can't wait to see the M sills!

From a GS3, this was sent.

[danewilson77]

I have the depo's from Khoalty.

All around with LED's on the sides.

[az3579]

Damn nice when you can do a refresh like that. Enjoy brutha.

The S54 sure would liven it up a bit though. lol


I have the depo's from Khoalty.

All around with LED's on the sides.

What's warranting the switch to OEM ones? Quality issues?

[328ioc]

I got my General GMax's put on today. Its amazing what 4 new tires can do. So much smoother and the sound I though was a wheel bearing is gone!

Not to mention it took 35 min to have 4 tires done.

Sent from my DROID RAZR using Tapatalk 2

[danewilson77]

What's warranting the switch to OEM ones? Quality issues?

Anal retentiveness and quality. My zhp deserves the euro-clears.

[az3579]

Anal retentiveness and quality. My zhp deserves the euro-clears.

Fully agreed. I was toying with this idea as well, down the road. We'll see.
The OEM kit is so friggin' expensive. Was thinking of ordering from the UK from a wrecked car, but have to find a complete set.

[Torxuvin]

Let me know when you get ready to sell the depos. ;)

[az3579]

Let me know when you get ready to sell the depos. ;)

I'd have to have OEM clears in hand before that would happen... That's a hefty chunk of change I won't have for a while. lol

[danewilson77]

Let me know when you get ready to sell the depos. ;)

Will do. I'll sell them here of course. They're all in perfect-like new condition.

[az3579]

Oh sorry, for some weird reason I thought this was a continuation of another thread.. :rofl

[Johal E32]

Sorry.:shifty

Cool.

Damn nice when you can do a refresh like that. Enjoy brutha.

I'm going to do CAB's and FSM's over Christmas.

Planned: Euro clears, Silver cube interior, ///M door sills, brakes and tires.

Might be time for me to get some TC Klines by then.

S/A's or D/A's?

TCK makes great stuff. My cousin has them on his E36 w/ 400 front and 500 rear springs rates and they are set close to ful soft and the car rides and handles beautifully!

[danewilson77]

S/A's or D/A's?

TCK makes great stuff. My cousin has them on his E36 w/ 400 front and 500 rear springs rates and they are set close to ful soft and the car rides and handles beautifully!

S/A's.

Sent from Williamsburg, VA USA

[Vas]

You guys talking about the tails that turner sells ? A complete kit is like $400 I believe. Correct me if I'm wrong.

[Johal E32]

You guys talking about the tails that turner sells ? A complete kit is like $400 I believe. Correct me if I'm wrong.

Yeah, something like that. Around 400.

I wonder what tischer or e-bmwparts charges? Maybe a few dollars cheaper?

Anybody try ebay.de? Maybe score some used OEM RCR's from the motherland. :)

[Avetiso]

Yeah, something like that. Around 400.

I wonder what tischer or e-bmwparts charges? Maybe a few dollars cheaper?

Anybody try ebay.de? Maybe score some used OEM RCR's from the motherland. :)

http://www.ebay.de/itm/BMW-E46-3er-Original-Facelift-Ruckleuchte-Links-Rechts-Innen-Rear-Tail-Lights-/180931004817?pt=DE_Autoteile&fits=Make%3ABMW%7CType%3A330i&hash=item2a20540991#ht_883wt_1139

Looks at $218 plus shipping/customs.

[alexandre]

If you search for item #130816124213 the LED RCR's are $81... Wonder how the quality is though.

BTW Johal Turner has the best deal around. I called ebmwparts and they told me the price wasn't within their reach.

[Rovert]

The S54 sure would liven it up a bit though. lol

Is it me being totally satisfied or does my friend who has an ///M Z4 coupe not know how to drive? When I was following him I was able to keep up behind him as long as I kept the rev's up. This was turning repeatedly on roads where the speed limit was 50MPH so we rocketed out of every turn and intersection. I was surprised that he couldn't put much distance in between while hitting "goto jail time" up to 4th gear...LOL. Should I be even saying that here? :P

[Sockethead]

But the difference is that you were never able to overtake him, yes?

[danewilson77]

Is it me being totally satisfied or does my friend who has an ///M Z4 coupe not know how to drive? When I was following him I was able to keep up behind him as long as I kept the rev's up. This was turning repeatedly on roads where the speed limit was 50MPH so we rocketed out of every turn and intersection. I was surprised that he couldn't put much distance in between while hitting "goto jail time" up to 4th gear...LOL. Should I be even saying that here? :P

S54. This was all driver predicated.

[Rovert]

But the difference is that you were never able to overtake him, yes?

LOL I can't overtake an S54 but I can leave it wondering why I'm still behind!! It's like that sticky honey that you just can't wash off....always there bugging you! Hahaha

I could tell he was going all out because he's done the exhaust mod I told him about. Leave one exhaust ring off that connects the pipe to the muffler for louder sound...and it sure makes it louder!! But it doesn't sound leaky/ricey at all. So you get half muffler/half straight pipe!

[midlandtech]

Got a FB invite from KC BMW club for a DIY session. they chose to use the pic of us working on our ZHP's in the invite. Thought it was kinda a cool pic (not sure if I've posted it here before)

[Rovert]

That's sweet....DIY sessions with lift access! The only thing better than that is to have a butler at your service when you want tea and biscuits in between replacing the exhaust! :D

[coby1]

blacked out the trunk and installed a Dynavin(bought it like 6 months ago lol)
now if i could find the time to clean the garage/paint the house and clean/wax the car etc. etc.

[Torxuvin]

Looks good

[nike001]

How did you black out the trunk?

I saw this on 330i ZHP's car as well

[cakM3]

blacked out the trunk and installed a Dynavin(bought it like 6 months ago lol)
now if i could find the time to clean the garage/paint the house and clean/wax the car etc. etc.

Love the carbon fiber rear strut bar! :thumbsup

[coby1]

How did you black out the trunk?

I saw this on 330i ZHP's car as well

I had bought the bar from him( and really like the look of the trunk) i do not know how he did his but i just took it all out and spray dyed it and snapped it back in a few days later.

[danewilson77]

blacked out the trunk and installed a Dynavin(bought it like 6 months ago lol)
now if i could find the time to clean the garage/paint the house and clean/wax the car etc. etc.

Looks amazing Coby.

[cakM3]

Looks amazing Coby.

+1

Yeah, I have to agree.....looks amazing!

[Hornung418]

Went off course on my way home from work. Lost a fog surround and scraped the bottom of the bumper a bit. No fluid loss and drives fine.

From a GS3, this was sent.

[johnrando]

Trunk looks great!

[az3579]

Went off course on my way home from work. Lost a fog surround and scraped the bottom of the bumper a bit. No fluid loss and drives fine.

From a GS3, this was sent.

How'd that end up happening?

[Hornung418]

Forgot to turn the wheel. I was following the car in front and it went straight. Slammed on the brakes but I was gonna hit the transition anyway. I'm sure I can find the shroud on my way to work tomorrow lol. No harm done. Just an annoying incident.

From a GS3, this was sent.

[Johal E32]

If you search for item #130816124213 the LED RCR's are $81... Wonder how the quality is though.

BTW Johal Turner has the best deal around. I called ebmwparts and they told me the price wasn't within their reach.

looks like turner is the place for new OEM clears.

[nike001]

I had bought the bar from him( and really like the look of the trunk) i do not know how he did his but i just took it all out and spray dyed it and snapped it back in a few days later.

rattle can? which one.. if you don't mind?

I'm looking to do this mod as well.

[ryankokesh]

Forgot to turn the wheel. I was following the car in front and it went straight. Slammed on the brakes but I was gonna hit the transition anyway. I'm sure I can find the shroud on my way to work tomorrow lol. No harm done. Just an annoying incident.

From a GS3, this was sent.

Bummer man, hope ya find it!

[KevinC]

I longed to get mine back. It's been in the body shop since Monday of last week, after some dick wrinkle rear ended me in SoCal. Should be done any day now. Hoping that I don't have paint mismatch issues - matching TiAg is difficult. Will post before and after shots of the repair when she's back. In the meantime, getting an unusual amount of quality time with my Z4MC, which is far from a bad thing.

[Sockethead]

Forgot to turn the wheel. I was following the car in front and it went straight. Slammed on the brakes but I was gonna hit the transition anyway. I'm sure I can find the shroud on my way to work tomorrow lol. No harm done. Just an annoying incident.
Kinda like me curbing the wheel on Kpro's 135, eh? :facepalm

[Rovert]

Nice Rob! And where did you park to make it worth it? I curbed a rim at the Lexus dealership parking lot...serves me right. And I also curbed because I was so excited to get Bubble Tea that I forgot to fully stop when driving forward into the spot. LOL. Bubble Tea was worth it. Lexus was NOT.

[Lespaulman16]

Not on my ZHP, but did a final stage unit and full detail on 03 325i

[Hornung418]

Bummer man, hope ya find it!

Haha found it this morning..in about 20 shards. Guess I ran over it or the traffic from the side road crushed it. Oh well there goes another $5...

From a GS3, this was sent.

[coby1]

rattle can? which one.. if you don't mind?

I'm looking to do this mod as well.

vht spray dye

[Sockethead]

Nice Rob! And where did you park to make it worth it? I curbed a rim at the Lexus dealership parking lot...serves me right. And I also curbed because I was so excited to get Bubble Tea that I forgot to fully stop when driving forward into the spot. LOL. Bubble Tea was worth it. Lexus was NOT.

Umm it wasn't a parking lot.... I was looking at something whlie driving and nailed the curb.... with Kpro in the car nono I though she was going to be like :gunsbut she was cool about it.

[nike001]

Today I used it to piss off an angry prefacelift e90 325xi driver. Hilarious.

I guess she got mad I passed her and then later caught up when the road went back to single lane riding my ass. About a mile later she tried to pass me in the middle lane (used for turning into wherever) and was faced with another car in that lane turning.. ha! She ended up losing 2 spots to other cars in that act. Later on at a stop light, it turns to 2 lanes again, where one turns off to another road. She was stuck behind a tractor trailer and I stayed in the other lane right by his rear tires so she couldn't get in my lane to pass him. Last minute I accelerate to pass the truck, and she was stuck behind him putting down the road going 25mph in a 45. Sucks!

http://hashtagdelhi.com/wp-content/uploads/2012/09/coolface-trollface-trolls-faces.png



vht spray dye

Thanks!

[UdubBadger]

Nice Rob! And where did you park to make it worth it? I curbed a rim at the Lexus dealership parking lot...serves me right. And I also curbed because I was so excited to get Bubble Tea that I forgot to fully stop when driving forward into the spot. LOL. Bubble Tea was worth it. Lexus was NOT.

:rofl

[Rovert]

Umm it wasn't a parking lot.... I was looking at something whlie driving and nailed the curb.... with Kpro in the car nono I though she was going to be like :gunsbut she was cool about it.

hahahahha I've never done that. LOL. Kpro is so pro...she failed at warning that you're departing your lane! Time for a new BMW with Lane Departure for you. :P

I've hit a curb, Ken Block style drifting my parent's AWD minivan. I came into a corner hard but then realized the minivan's engine didn't have enough power to keep the tires spinning so it gripped too early as I brushed the inside curb with the rear tire. LOL

[Torxuvin]

Picked up redline d4 atf (tranny flush), mobile 1 atf (power steering flush), and a turkey baster (you know ;)) in preparation for tomorrow's workday.

[Rovert]

I topped my baby off with oil as she loves to burn a bit because she's just so dang hawt!!

[UdubBadger]

I topped my baby off with oil as she loves to burn a bit because she's just so dang hawt!!

hahaha

[alexandre]

Installed the black friday Orion V2's and swapped out the DISA oring with one from GAS. AE's look super cool and my o-ring was definitely trashed.

[Johal E32]

Changed the following

oli change (BMW oil)
Alternator changed with a rebuilt Bosch unit
Idler pulley and tensioner pulley both changed with OEM units
Cleaned the MAF

I saved a few hundred by doing the alternator myself! I am glad I diy'd it. It was not too hard to do, the hardest part was re-installing the main belt because the hydraulic tensioner is so tight, and I was using a shitty little ratchet while trying to put the belt one with my other hand :rofl
I finally had my Dad crank the tensioner with the shitty ratchet while I quickly slipped the belt on.

I then took the car on a mildly spirited drive for ~20 miles and I averaged 26 mpg :) (lots of down hill with twisty roads)

[Rovert]

I just painted my M68's!! They look fan uking tactic! LOL....well in low shop light they do. I'll see tomorrow when there's daylight.

[zhpnsnv]

50% tint and clear bra.

http://img.tapatalk.com/d/12/12/16/tyqana3u.jpg

http://img.tapatalk.com/d/12/12/16/me4a2ute.jpg


Sent from the freaking Catalina wine mixer.

[Johal E32]

^Nice!

How is the 50% tint? My dad wants his E39 tinted, I am thinking either 35% all over, but he wants to keep a classy look so the clear ceramic tint fits the bill.. But that is very expensive. So maybe 50% is the best tint to go with.

[johnrando]

I did 35% all around (except front of course) with whatever the best stuff is (ceramic maybe?), really like it. Looks good, plus peace of mind.

[JKO_ZHP]

Had the amber bulbs in the turn signals swapped out for LEDs. Much better looking - entire front is now 100% white and/or blueish.
Passenger fog ballast replaced but it looks like the driver's side is 6000K while passenger is 4300K.............

[zhpnsnv]

^Nice!

How is the 50% tint? My dad wants his E39 tinted, I am thinking either 35% all over, but he wants to keep a classy look so the clear ceramic tint fits the bill.. But that is very expensive. So maybe 50% is the best tint to go with.

I don't like 35% so 50 is perfect for me. It compliments the color of the ext and int just right. I'll try to get better pics tomorrow.


Sent from the freaking Catalina wine mixer.

[Johal E32]

I did 35% all around (except front of course) with whatever the best stuff is (ceramic maybe?), really like it. Looks good, plus peace of mind.

Yeah, the best stuff is ceramic. I have 5% on the rear and 35% on the front (3m tint). I am steering my dad towards a uniform tint, like 50% front and back. Tint on the front windows is illegal in Ca.. But I have never been stopped for it and I doubt I will. The PO parked the car outside (on the strret) in SF everyday and never got a window tint ticket either.

[Whitexi]

50% tint and clear bra.

http://img.tapatalk.com/d/12/12/16/tyqana3u.jpg

http://img.tapatalk.com/d/12/12/16/me4a2ute.jpg


Sent from the freaking Catalina wine mixer.

Looks nice! I have been thinking what tint I'm going to get.

[Vas]

Installed the uuc red isolated trans bushings with isolated cups. Drove it and the vibration is insane so removed the cups. Just the red bushings still produce a decent amount of vibration so I ordered the black urethane trans mount.

Let the experiments begin.

[az3579]

Trevor,
Could you please post pics of your painted 68's?


kthxbai

[Hornung418]

Installed the uuc red isolated trans bushings with isolated cups. Drove it and the vibration is insane so removed the cups. Just the red bushings still produce a decent amount of vibration so I ordered the black urethane trans mount.

Let the experiments begin.

Didn't like em?! UUC is not the place for your mounts. Recommend AKG for all of your bushing necessities. And yes the vibration with the red mounts is obnoxious. That's why I installed both the engine and transmission mounts in 75D! I drive my car everyday and love the feel and response; especially the cabin shaking vibration when I decelerate through the gears from 75mph on the back roads.

No cups; they're meant for the e21 trans mounts. When you get the mounts you like make sure you torque them to factory spec - the aftermarket spec is way off. I go by: turn til squash, back off a quarter turn.

From a GS3, this was sent.

[Vas]

Didn't like em?! UUC is not the place for your mounts. Recommend AKG for all of your bushing necessities. And yes the vibration with the red mounts is obnoxious. That's why I installed both the engine and transmission mounts in 75D! I drive my car everyday and love the feel and response; especially the cabin shaking vibration when I decelerate through the gears from 75mph on the back roads.

No cups; they're meant for the e21 trans mounts. When you get the mounts you like make sure you torque them to factory spec - the aftermarket spec is way off. I go by: turn til squash, back off a quarter turn.

From a GS3, this was sent.

Mind sharing what is wrong with UUC and their bushings? Seem like a nice design.

The red isolated trans mounts are a bit too much for my liking as far as vibration goes. And I do not think urethane will soften over time and will be hard during the cold weather. So I decided to give these black urethane bushings a try from UUC since they are fairly cheap. And if they are too soft, I can add the cups which I have.

75d is pretty stiff as well since I have a steering column bushing from AKG in 75d waiting to be installed. Any vibrations through the steering wheel from that?

[Hornung418]

Nivo has installed that. I suggest sending him a PM regarding the steering guibo.

UUCs design was not very well thought out in the early stages of their initial product run and because of the catastrophic failures associated with that design I have since avoided them for all future purchases. The owner is just a shady character. The only thing I bought from them was a panel filter made by afe.

AKG is a manufacturer that solely makes bushings and mounts as well as a few odds and ends for BMW. Dedicated and great customer service has made me a repeat customer. They offer a wide variety of stiffness and can definitely give your car the feel that desire.

From a GS3, this was sent.

[HokieZHP]

Just putting my opinion in here, I rode in Justin's car and personally I couldn't handle the vibrations the 75D's produce on a daily basis or even on a trip over a couple hours for that matter. Not bashing them as I'm sure they're great for those who are looking for a feel like that, just not for me.

[Hornung418]

That was mostly the engine mounts. Bimmerworld makes a nice mount that only vibrates when you're under 1000 rpm.

But the bolt through trans mounts will always add NVH. the OEM mounts are the best at the luxury smooth ride but the poly mounts in the same design with fail...catastrophically. again when I get older and tire of the vibrations I will probably swap them for softer mounts. But every time I drive it's a racecar :)

From a GS3, this was sent.

[Nomar06]

I'm a fan of AKG.....loving the constant vibration massage I get from the trans mounts. lol

Added these today....

http://i783.photobucket.com/albums/yy114/Nomar006/463239_10151273854573389_2137624184_o_zps7f14c62a. jpg

Pretty bright for angel eyes...

http://i783.photobucket.com/albums/yy114/Nomar006/CIMG3873_zpsbc22f73c.jpg

Having fitment issues on the drivers side. The black bezel hits the angel eye no matter what position I put the bezel in...

[johnrando]

Absolutely love the 50% on your car Marc, with that color. I went 35% due to CA laws, and with a black car, I wanted something a little darker but not dark enough to have deal with the police.

[zhpnsnv]

Thanks. Nj has the law too. Hopefully the 50 is light enough. 35 is pretty obvious.


Sent from the freaking Catalina wine mixer.

[johnrando]

Thanks. Nj has the law too. Hopefully the 50 is light enough. 35 is pretty obvious.


Sent from the freaking Catalina wine mixer.

35 is obvious but since you can see inside the car, they tend to let it slide. Heck, they let much worse than that slide a lot of times in CA, as they generally have more pressing things to do... but I'd rather play it relatively safer. But yes, if they want to get me, they certainly can.

[cakM3]

Marc,

I think the 50% looks perfect on your car! Man does your car look awesome! Congrats and may you get many years of enjoyment from her...:thumbsup

[zhpnsnv]

Thanks, Charlie!

[danewilson77]

#carisgorgeousnotcommentingtoojealousohwait

Sent from Williamsburg, VA USA

[kayger12]

Car looks awesome, Marc. Love the 50%. Perfect on that car.

[das boots]

Had the amber bulbs in the turn signals swapped out for LEDs. Much better looking - entire front is now 100% white and/or blueish.
Passenger fog ballast replaced but it looks like the driver's side is 6000K while passenger is 4300K.............

Where did you get the LED turn signal bulbs?

[UdubBadger]

been jonesing really hard for another 135i the last two days... not sure how much longer I can hold out.

[static667]

Lets see...
I changed out my VANOS unit, put on a new VCG, installed an M3 timing chain tensioner, changed out my oil filter housing, put red loc-tite on my oil pump nut, put on a new oil pan gasket, installed a new water pump, thermostat, coolant pipes, PCV valve, spark plugs, clutch, front and rear shaft seals, exhaust manifold studs, exhaust manifold gaskets, new exhaust manifold nuts, and intake manifold gasket. In other words, prepared an engine for install. Tomorrow, it will be in the car.

[danewilson77]

Lets see...
I changed out my VANOS unit, put on a new VCG, installed an M3 timing chain tensioner, changed out my oil filter housing, put red loc-tite on my oil pump nut, put on a new oil pan gasket, installed a new water pump, thermostat, coolant pipes, PCV valve, spark plugs, clutch, front and rear shaft seals, exhaust manifold studs, exhaust manifold gaskets, new exhaust manifold nuts, and intake manifold gasket. In other words, prepared an engine for install. Tomorrow, it will be in the car.

Awesome news Kyle. So... I guess the fourth engine that you got was SAT.

Sent from Williamsburg, VA USA

[johnrando]

Really good to hear Kyle. Hope it continues to go well.

[328ioc]

Thanks. Nj has the law too. Hopefully the 50 is light enough. 35 is pretty obvious.


Sent from the freaking Catalina wine mixer.

I have friends who have had 35 and never got bothered. I also have 35 but I've never had this car in Jersey so we will see how the next few days goes.

But your 50 looks great.

Sent from my DROID RAZR using Tapatalk 2

[Hermes]

say goodbye everybody... new M10 will be picked up next week for full rebuild on an engine stand + mods before putting in the 02 (292 grind, dual side drafts, other stuff...)

http://i29.photobucket.com/albums/c288/jhermes/2002/0217E986-17B0-424F-AB2C-EB7691CBDC32-264-00000013E485CFA0.jpg

edit: I gotta start working on the 911...

[Hornung418]

Great news, Kyle!!! So excited to see everything in action.

JP, all of that work on the M10 and you're just gonna chuck it for a new one? And put that battery in the trunk, son!

[kayger12]

Lets see...
I changed out my VANOS unit, put on a new VCG, installed an M3 timing chain tensioner, changed out my oil filter housing, put red loc-tite on my oil pump nut, put on a new oil pan gasket, installed a new water pump, thermostat, coolant pipes, PCV valve, spark plugs, clutch, front and rear shaft seals, exhaust manifold studs, exhaust manifold gaskets, new exhaust manifold nuts, and intake manifold gasket. In other words, prepared an engine for install. Tomorrow, it will be in the car.

Outstanding!!

[zhpnsnv]

been jonesing really hard for another 135i the last two days... not sure how much longer I can hold out.

Well, let me know and we can chat about getting @ or below invoice pricing! (if you're shopping new).

[zhpnsnv]

Looks darker in overcast conditions.

http://img.tapatalk.com/d/12/12/16/7eme9uhu.jpg


Sent from the freaking Catalina wine mixer.

[Johal E32]

^sold! 50% tint all over for the E39!

Thank you for that picture!