PDA

View Full Version : What did you do for your ZHP/BMW today?



Pages : 1 2 [3] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

SkiB07
06-05-2011, 08:38 AM
Definitely going Meyle this time around. I installed OEM about 10k ago, and the steering wheel is twitching again when I stab the brakes. Are you sure its the new CABs that are shot and not warped rotors? If you waited too long to change the bushing after you started to feel the shimmy during breaking it might have warped your rotors, especially if the current shimmy is a lot less then original. I say this is because that is what happened to me, even though I installed Meyle HD bushing my shimmy stayed although there was improvement. I had to put new set of rotors to completely eliminate it. Just saying, bushings should last a little more than 10k regardless which ones you got.

kayger12
06-05-2011, 09:07 AM
http://i1234.photobucket.com/albums/ff401/Kayger12/2011-06-05_13-03-34_281.jpg



Droid X. Tapatalk. Use it.

Sockethead
06-05-2011, 09:09 AM
Definitely going Meyle this time around. I installed OEM about 10k ago, and the steering wheel is twitching again when I stab the brakes.

yep, this is what I'm feeling except I noticed it right away... When I had my diff mount replaced I asked them to check out the front end while it was on the lift... something I can't do laying on the ground. He said that they were reaaly soft and had a Mfr. date of '08


Are you sure its the new CABs that are shot and not warped rotors? If you waited too long to change the bushing after you started to feel the shimmy during breaking it might have warped your rotors, especially if the current shimmy is a lot less then original. I say this is because that is what happened to me, even though I installed Meyle HD bushing my shimmy stayed although there was improvement. I had to put new set of rotors to completely eliminate it. Just saying, bushings should last a little more than 10k regardless which ones you got.

Good point....My rotors are brand new. Also I'm not feeling any shimmy or wobble. Just the classic beat LCAB pulse in the steering wheel when hitting the brakes.

I wish I had the time to swap them out before the road trip.

Sockethead
06-05-2011, 09:14 AM
I feel way, way, way too much of the road. Also....the just kind of slipped onto the control arms....whereas the HD's need to be helped on. Front end just doesn't feel right, and I would bet half a paycheck its the CAB's. JW77(my indy mechanic) is throwing the Meyle's on this week.

Droid + Tapatalk = FTW!

That's good to know. I was thinking about trying them. I use my car to go from site to site every day... don't that in the wheel.

Where did you get the Meyle's? Maybe I'll just overnight them and throw em on the car before I leave.... There is no differnce on ZHP when ordering, no?

kayger12
06-05-2011, 09:16 AM
No difference for the ZHP.

Did Meyles on my 325 and the ZHP. Very happy with them.

Droid X. Tapatalk. Use it.

Washburn
06-05-2011, 09:20 AM
http://i1234.photobucket.com/albums/ff401/Kayger12/2011-06-05_13-03-34_281.jpg


Nice, man!!!
what was the exact procedure for the removal of the 330Ci badge?

kayger12
06-05-2011, 09:32 AM
Thanks, Wash.

Crest Glide Deep Clean Cool Mint Floss took the letters/numbers right off with a little sawing motion. Then I removed the larger pieces of left over adhesive with my fingers and went over it with some Goo Gone.

After that, there was just the slightest visible outline of adhesive where the letters were that I couldn't get off with the Goo Gone and a microfiber, so I broke out the Porter Cable and some Menzerna finishing polish.

Total time was about 15 minutes.

Washburn
06-05-2011, 09:38 AM
Thanks...I have floss, and bug/tar cleaner and rubbing compound/wax etc...should be ok...
I am leaning towards doing mine....should I? should I?

kayger12
06-05-2011, 09:39 AM
Wash, I've been waffling for months.

Marc (zhpnsnv) was here yesterday and sold me on it.

Glad I did it. Instantly makes the back end look cleaner/better, imo.

Washburn
06-05-2011, 09:44 AM
if I do it, I want to make the trunk lock hole also body color...I know there are door key hole plugs...wonder if they'll fit.

Mtnman
06-05-2011, 09:55 AM
I finished my suspension work today. I had a total FAIL yesterday and could not complete the task. I installed H and R cup kit (touring version). everything was going well until the new springs had to be compressed onto the new struts. I worked at it for 6 hours, with 2 spring compressor kits and could never get it. I went to bed last night worried about what in the hell i had gotten myself into. This was totally new to me, and i had never even watched someone do suspension work. (thats me though, just say F-it, im gonna do it and learn as I go).....Well Huge thanks to Firestone this morning, who hooked me up and compressed the springs for me. They werent even gonna charge me, so i threw the tech $40 for the effort. once i got the struts home, the rest was easy. The rears were a piece of cake. Although I am dissapointed with my failure to compress the springs, I am pretty impressed that I got it all done without anyone's help. Nobody to hold anything, to reach for a tool...nothing. Pure Solo accomplishment. (minus the springs..damnit)

She rides great, and sits at 13.75 in the front, which i believe is exactly .75 lower than stock. Money!

Marcus-SanDiego
06-05-2011, 09:56 AM
David, congrats on a job well done.

Alphatek45
06-05-2011, 09:57 AM
Thanks...I have floss, and bug/tar cleaner and rubbing compound/wax etc...should be ok...
I am leaning towards doing mine....should I? should I?

YES! Did it recently too. Very Easy to do. Looks great. You wont regret it imo.

Sockethead
06-05-2011, 10:12 AM
IAlthough I am dissapointed with my failure to compress the springs, I am pretty impressed that I got it all done without anyone's help. Nobody to hold anything, to reach for a tool...nothing. Pure Solo accomplishment. (minus the springs..damnit)

Heh, No fail for the springs dude. they are a bitch with crappy little compressors. I did the same thing when I put in my Koni's... took the struts to my buddies shop. Except I only tried for about a half hour before throwing in the towel.

I look at it this way: not lack of skill... lack of tools...

EDIT: Wish I could do springs but I'm already scraping when I pull in my driveway :mad

kayger12
06-05-2011, 11:26 AM
I finished my suspension work today. I had a total FAIL yesterday and could not complete the task. I installed H and R cup kit (touring version). everything was going well until the new springs had to be compressed onto the new struts. I worked at it for 6 hours, with 2 spring compressor kits and could never get it. I went to bed last night worried about what in the hell i had gotten myself into. This was totally new to me, and i had never even watched someone do suspension work. (thats me though, just say F-it, im gonna do it and learn as I go).....Well Huge thanks to Firestone this morning, who hooked me up and compressed the springs for me. They werent even gonna charge me, so i threw the tech $40 for the effort. once i got the struts home, the rest was easy. The rears were a piece of cake. Although I am dissapointed with my failure to compress the springs, I am pretty impressed that I got it all done without anyone's help. Nobody to hold anything, to reach for a tool...nothing. Pure Solo accomplishment. (minus the springs..damnit)

She rides great, and sits at 13.75 in the front, which i believe is exactly .75 lower than stock. Money!

Way to tackle it, David.

Job well done!

Droid X. Tapatalk. Use it.

lilcdkey
06-05-2011, 12:24 PM
Took off my splitters for tomorrows install. My front end looks so much less agressive now :(

MOTOROLA ATRIX TAPATALK

danewilson77
06-05-2011, 12:36 PM
That's good to know. I was thinking about trying them. I use my car to go from site to site every day... don't that in the wheel.

Where did you get the Meyle's? Maybe I'll just overnight them and throw em on the car before I leave.... There is no differnce on ZHP when ordering, no?

I usually get my HD's from ECS but this time I got them from Autohaus AZ. Just cuz...

Droid + Tapatalk = FTW!

johnrando
06-05-2011, 12:56 PM
http://i1234.photobucket.com/albums/ff401/Kayger12/2011-06-05_13-03-34_281.jpg



Droid X. Tapatalk. Use it.

OMG!

danewilson77
06-05-2011, 01:03 PM
OMG!

Shizz looks clean don't it?

Droid + Tapatalk = FTW!

Sockethead
06-05-2011, 01:06 PM
I usually get my HD's from ECS but this time I got them from Autohaus AZ. Just cuz...

Droid + Tapatalk = FTW!
I tnx... I couldn't remember where I got em, that was 4 yrs ago..

johnrando
06-05-2011, 01:13 PM
Shizz looks clean don't it?

Droid + Tapatalk = FTW!

Definitely! The problem is, it's soooo clean howz he gonna put de "ZHP" letters on?

danewilson77
06-05-2011, 01:14 PM
Definitely! The problem is, it's soooo clean howz he gonna put de "ZHP" letters on?

:rofl

Droid + Tapatalk = FTW!

kayger12
06-05-2011, 01:23 PM
Definitely! The problem is, it's soooo clean howz he gonna put de "ZHP" letters on?

Lol-- I was just holding them up looking at them, John. It's a no go. Didn't pass the wife test.

Just got done giving the ZHP a wash along with an engine detail. I'll tackle the interior in a bit and then she'll be all ready for Williamsburg!

Mtnman
06-05-2011, 01:25 PM
Keith, your just gonna have to get one of these now......


http://i1091.photobucket.com/albums/i398/booneflyfisher/2011-02-11_13-07-03_150.jpg

kayger12
06-05-2011, 01:28 PM
I think you might be right, David.

danewilson77
06-05-2011, 01:31 PM
Keith, your just gonna have to get one of these now......


http://i1091.photobucket.com/albums/i398/booneflyfisher/2011-02-11_13-07-03_150.jpg

Awesomeness.

Droid + Tapatalk = FTW!

johnrando
06-05-2011, 02:11 PM
Lol-- I was just holding them up looking at them, John. It's a no go. Didn't pass the wife test.

Just got done giving the ZHP a wash along with an engine detail. I'll tackle the interior in a bit and then she'll be all ready for Williamsburg!

Oh man! :)

Marcus-SanDiego
06-05-2011, 02:14 PM
Lol-- I was just holding them up looking at them, John. It's a no go. Didn't pass the wife test.

Just got done giving the ZHP a wash along with an engine detail. I'll tackle the interior in a bit and then she'll be all ready for Williamsburg!

You can raffle them off at the VA meet.


iPad. Tapatalk. Bi-winning.

lilcdkey
06-05-2011, 02:32 PM
:(
1045

motorola atrix tapatalk

Newjack
06-06-2011, 01:42 PM
Bought black kidney grills and replacement blue carbon fiber roundels for the front and back. Khoalty is awesome, they should be here tomorrow!

kayger12
06-06-2011, 03:08 PM
Nice pick up. Very happy with my cf roundels from Khoalty.

jamesdak
06-06-2011, 05:05 PM
Today I did the "turkey baster" flush of some very nasty looking power steering fluid. Covered the area around the reservoir with rags and wound up making no mess at all. Easier than the oil change I did this weekend. Found out I couldn't get the car onto my ramps and had to drive it up on some boards to have enough room underneath.

GMATT
06-06-2011, 05:16 PM
Bought some front end "undies" for the ZHP..they came in the mail ...............no bug splatter for me!nono

Washburn
06-06-2011, 06:04 PM
i'd like to see those "undies"

cakM3
06-06-2011, 09:08 PM
I picked up Dane and BP and took them in my ZHP to Mohegan Sun Casino for dinner and drinks... Good times :thumbsup

lilcdkey
06-06-2011, 10:47 PM
wash, wax, installed splitters, and debadged.

thesixsins
06-06-2011, 10:52 PM
^^ photos!^^

Performance grillz on the way!

lilcdkey
06-06-2011, 11:14 PM
^^ photos!^^

Performance grillz on the way!

Check out my build thread in the projects section ;)

SkiB07
06-07-2011, 03:43 AM
I did a lot of more work on my ZHP in the past two weeks than I was hoping for. What started as a simple Turbo kit installation instead turned out to be maintenance job from hell.
During the process of gear box removal I busted (broken off) both 12mm gearbox/engine mounts of the engine block. Bolts were over toques and appeared corroded on the end so it would not pull through the tread and busted both off. Had to remove the engine block to have them welded back on. After a few days delay for block repair I replaced the clutch disk (Kevlar) M3 pressure plate and M3 throw out bearing. Lastly I installed Technique Tuning turbo kit. That was the easy part compare to the rest. Running at 6 psi now until I install the EBC sometime after I recuperate from this last fiasco and enjoy this car a little.

johnrando
06-07-2011, 05:20 AM
I did a lot of more work on my ZHP in the past two weeks than I was hoping for. What started as a simple Turbo kit installation instead turned out to be maintenance job from hell.
During the process of gear box removal I busted (broken off) both 12mm gearbox/engine mounts of the engine block. Bolts were over toques and appeared corroded on the end so it would not pull through the tread and busted both off. Had to remove the engine block to have them welded back on. After a few days delay for block repair I replaced the clutch disk (Kevlar) M3 pressure plate and M3 throw out bearing. Lastly I installed Technique Tuning turbo kit. That was the easy part compare to the rest. Running at 6 psi now until I install the EBC sometime after I recuperate from this last fiasco and enjoy this car a little.

This definitely sounds like a great one for the "project" thread. GL with the work, and keep us posted.

Marcus-SanDiego
06-07-2011, 06:04 AM
I did a lot of more work on my ZHP in the past two weeks than I was hoping for. What started as a simple Turbo kit installation instead turned out to be maintenance job from hell.
During the process of gear box removal I busted (broken off) both 12mm gearbox/engine mounts of the engine block. Bolts were over toques and appeared corroded on the end so it would not pull through the tread and busted both off. Had to remove the engine block to have them welded back on. After a few days delay for block repair I replaced the clutch disk (Kevlar) M3 pressure plate and M3 throw out bearing. Lastly I installed Technique Tuning turbo kit. That was the easy part compare to the rest. Running at 6 psi now until I install the EBC sometime after I recuperate from this last fiasco and enjoy this car a little.

I don't see your name on the list, Darius, of those attending the Virginia meet in a few days (http://www.zhpmafia.com/forums/showthread.php?1079-ZHP-Mafia-Family-Reunion-June-10-2011-thru-June-12-2011-in-Williamsburg-Virginia). We won't see you there? Would love to check out your car.

CERF04ZHP
06-07-2011, 06:38 AM
Taped off and sprayed lower grille flat black, also touched up a few rock chips in the M-Technic bumper! Grille looks awesome, nice and dark now to match the kidneys.

danewilson77
06-07-2011, 08:48 AM
Taped off and sprayed lower grille flat black, also touched up a few rock chips in the M-Technic bumper! Grille looks awesome, nice and dark now to match the kidneys.

Very good sir.

Droid + Tapatalk = FTW!

Stu
06-07-2011, 12:03 PM
Took off that tiny little clip thing on the driver's side wiper blade. It's where the spring is. Just push it forward towards the passenger wiper blade and it pops right off. Only do this if you have bracketless wiper blades (i.e. RainX or Bosch Icons). It'll stop the chattering/skipping, but it may make your non-bracketless wiper blades not work if you don't have those.

lilcdkey
06-07-2011, 01:50 PM
Let my mom drive it because she was getting her inspection I done. I'm scared that she'll come back with a cracked splitter :eeps

danewilson77
06-07-2011, 04:55 PM
Let my mom drive it because she was getting her inspection I done. I'm scared that she'll come back with a cracked splitter :eeps

Just tell her to roll slow, and low...like a turtle.

Droid + Tapatalk = FTW!

lilcdkey
06-07-2011, 10:46 PM
It came back unharmed :biggrin

az3579
06-08-2011, 03:30 AM
Yesterday (meant to post yesterday but was tired), I introduced some darkness to the environment:

http://i200.photobucket.com/albums/aa192/az3579/Automotive/BMW%20E46%20330i%20ZHP/Exterior/2011-06-07_18-16-58_568.jpg

http://i200.photobucket.com/albums/aa192/az3579/Automotive/BMW%20E46%20330i%20ZHP/Exterior/2011-06-07_18-17-07_593.jpg

http://i200.photobucket.com/albums/aa192/az3579/Automotive/BMW%20E46%20330i%20ZHP/Exterior/2011-06-07_18-19-16_226.jpg

Newjack
06-08-2011, 10:07 AM
Yesterday (meant to post yesterday but was tired), I introduced some darkness to the environment:

http://i200.photobucket.com/albums/aa192/az3579/Automotive/BMW%20E46%20330i%20ZHP/Exterior/2011-06-07_18-16-58_568.jpg

http://i200.photobucket.com/albums/aa192/az3579/Automotive/BMW%20E46%20330i%20ZHP/Exterior/2011-06-07_18-17-07_593.jpg

http://i200.photobucket.com/albums/aa192/az3579/Automotive/BMW%20E46%20330i%20ZHP/Exterior/2011-06-07_18-19-16_226.jpg

The black corners look really good on that Imola red. I'm deciding if I'm going to put smoked corners or clear corners on my jet black ZHP.

az3579
06-08-2011, 11:29 AM
The black corners look really good on that Imola red. I'm deciding if I'm going to put smoked corners or clear corners on my jet black ZHP.

On a Jet Black, I would put ambers or clears. I'd prefer ambers more, personally, as I've always loved orange and black combos.

danewilson77
06-08-2011, 12:13 PM
On a Jet Black, I would put ambers or clears. I'd prefer ambers more, personally, as I've always loved orange and black combos.

I can't believe...after all the hype on the ambers....you went with smoked....hehe.

Droid + Tapatalk = FTW!

Mtnman
06-08-2011, 12:14 PM
Yeah, whats that all about Botond! I thought you were my amber brother from another mother. Sell out! lol.

TRELO
06-08-2011, 01:59 PM
Powerflex cab bushings.. I now officially love my car...

GMATT
06-08-2011, 02:49 PM
Just installed a ECS Carbon Fibre strut brace.........................:pimp............... Nice stuff

danewilson77
06-08-2011, 02:55 PM
Just installed a ECS Carbon Fibre strut brace.........................:pimp............... Nice stuff

Vey nice sir. Pics or it will vaporize.

Droid + Tapatalk = FTW!

GMATT
06-08-2011, 03:04 PM
See it @ your house in what......................2 days! LOL

danewilson77
06-08-2011, 03:07 PM
See it @ your house in what......................2 days! LOL

I was thinking of the other peeps...hehe. plus...I can't wait 2 days! OMG.

Droid + Tapatalk = FTW!

Sockethead
06-08-2011, 04:02 PM
Installed LCAB tonight... A new personal record of 45 min end to end FTW :headbang
Now my car is road trip worthy.



I usually get my HD's from ECS but this time I got them from Autohaus AZ. Just cuz...

I ended up getting them from Bimmerworld. They're in VA so they got to my house in two days using UPS ground... plenty of time to throw them in before the meet

danewilson77
06-08-2011, 04:06 PM
Installed LCAB tonight... A new personal record of 45 min end to end FTW :headbang
Now my car is road trip worthy.



I ended up getting them from Bimmerworld. They're in VA so they got to my house in two days using UPS ground... plenty of time to throw them in before the meet

Yeah...nice. I got mine from AutohausAZ. Oops..I already said that.

Droid + Tapatalk = FTW!

GSEN820
06-08-2011, 04:22 PM
Just bought Rubber floor mats!!!!!!!!!!!

lilcdkey
06-08-2011, 04:24 PM
Just bought Rubber floor mats!!!!!!!!!!!

nice, oem? i need to buy mats.

GSEN820
06-08-2011, 04:29 PM
Yes Sir OEM.

danewilson77
06-08-2011, 04:58 PM
Just bought Rubber floor mats!!!!!!!!!!!

Rubbers are safe.

Droid + Tapatalk = FTW!

az3579
06-08-2011, 05:38 PM
I can't believe...after all the hype on the ambers....you went with smoked....hehe.

Droid + Tapatalk = FTW!


Yeah, whats that all about Botond! I thought you were my amber brother from another mother. Sell out! lol.

I don't remember saying I was going to keep ambers forever, I still love ambers and would choose them over clears on almost any color. I went with smoked because it much better matches the theme, though I don't know how well that's going to work out seeing as I made the dumb move of having my new wheels refinished in regular silver...

But David, you might get your wish. I might be going back to ambers, because today I installed the taillights that were supposed to be Red/Smoke/Red... and absolutely HATE them. The idiots sent me a light that is ALL smoked. It's not smoked a lot; light output is almost the same as before, but the red parts are smoked too and I friggin' HATE smoked red. I wanted fully red, with smoked turn signals. Apparently nobody sells them, and when I was looking at Eurosportdesign's site (where I ordered them from), the picture CLEARLY shows a full red, not smoked. The only thing smoked in the pic were the turn signals, and this is exactly what I was looking for.

If I wanted what I just received, I could've ordered from Khoalty for a lot less... :shifty



I HATE these friggin' taillights.

johnrando
06-08-2011, 08:48 PM
Dr. Colorchip and Eurospec side mirrors. I'm about to need my own project thread. Picked up a CF diffuser last week but hadn't installed it yet.

Marcus-SanDiego
06-08-2011, 08:50 PM
John, I think that would be a good idea. You've done a lot of stuff to the car.

az3579
06-09-2011, 01:33 AM
Dr. Colorchip and Eurospec side mirrors. I'm about to need my own project thread. Picked up a CF diffuser last week but hadn't installed it yet.

Eurospec mirrors? Is that the glass or the housing??

johnrando
06-09-2011, 06:25 AM
just the glass.

Sockethead
06-09-2011, 06:41 AM
just the glass.

what does that do for ya?

danewilson77
06-09-2011, 06:55 AM
what does that do for ya?

No blind spots. We have a couple of reviews on them...I believe...in the product review section.

Droid + Tapatalk = FTW!

Sockethead
06-09-2011, 08:02 AM
Tnx, yea that would be nice.. almost ran a couple of people off the road cause of that...

zhpnsnv
06-10-2011, 08:32 AM
Today I left the zhp in my father's garage and took his e46 for the trip down to va. Zhp is on a donut.

Anyone know where I can find a contiextremecontact dw 225/40/18??????




Sent from my iPhone using Tapatalk

Johnmadd
06-10-2011, 08:35 AM
Today I left the zhp in my father's garage and took his e46 for the trip down to va. Zhp is on a donut.

Anyone know where I can find a contiextremecontact dw 225/40/18??????




Sent from my iPhone using Tapatalk

I think I saw those at merchants tires in Williamsburg last week, pretty sure I did.

zhpnsnv
06-10-2011, 08:38 AM
Well that's a score. Will have to call them today when I get there!

Called. No luck.


Sent from my iPhone using Tapatalk

Crickett
06-10-2011, 10:18 AM
Woohoo! I'ma have a fun afternoon! (Not pictured: 7 qts of BMW 5W-30 in my trunk.)


Tapatalk on Jailbroken iOS: dhu eet!

Stu
06-10-2011, 06:10 PM
Got it nice and clean for my drive to VA tomorrow :)

...which ended up being completely futile because I think it just started raining. :( Hooray 30% chance of rain!

Also, if you have to get your windshield replaced, do not let them clean your windows on the car. Just do it with Windex later.

The solvent ate directly through my wax near the edges of the windshield. I don't know why. At first I freaked out, thinking he messed up and scratched up my clearcoat.

Bought some Meguiar's Rubbing Compound and Meguiar's Ultimate Wax Paste. Fixed it perfectly! The only issue is spending $20 on some wax and stuff. Oh well; I was going to get it anyway, but I just didn't wanna buy it right now.

Alphatek45
06-11-2011, 08:35 AM
Installed the Shark Injector today. VERY Happy w/ the results!

Also- Steering Wheel Restore


Before:

https://lh5.googleusercontent.com/-YFNEJu89Ghw/TfOYbDBlE7I/AAAAAAAABLw/fvsH8oE4HEk/IMG_2545.JPG

After:

http://i1177.photobucket.com/albums/x356/Alphatek45/DSC00281.jpg

Pics don't really do it justice. 100% better.

Ryans323i
06-11-2011, 09:20 AM
^^Lol. Congrats!

Crickett
06-11-2011, 09:29 AM
Plasti-Dipped the grilles & changed my oil & transmission fluid! Very eventful day!!


Tapatalk on Jailbroken iOS: dhu eet!

johnrando
06-11-2011, 10:40 AM
Cool Adam. Any more description on the Shark?

Alphatek45
06-11-2011, 10:45 AM
So far-
Smoother acceleration
Better throttle response
Idle seems a little smoother too
Definitely pulls harder and the dead spots are gone.
Think it was Dane who said he'd pay double? I concur. Great mod.

aurelius
06-11-2011, 02:29 PM
Installed the Shark Injector today.

Did you get the latest software for your DME before doing this? Were you experiencing the 2800 RPM issue prior to this?

Go Horns!
06-11-2011, 03:11 PM
Applied leatherique rejuvenator this morning. Going to clean it off tomorrow morning.

kayger12
06-11-2011, 08:24 PM
Congrats, Adam.

Shark, ftw.

Droid X. Tapatalk. Use it.

danewilson77
06-12-2011, 04:26 AM
Congrats, Adam.

Shark, ftw.

Droid X. Tapatalk. Use it.

+1

GMATT
06-12-2011, 04:50 AM
Up,wiped the car down,put the mirror covers and "bra" on....going to Dane's to say by for now :(......what awesome people, and the cars ain't bad either!....9.5hours home....if traffic is ok!

Sent from my PC36100 using Tapatalk

johnrando
06-12-2011, 11:06 AM
Tried to get the CF diffuser on... no go. Ordered 3M double sided tape, will try again once that's in. Wish me luck!

LouT
06-12-2011, 04:52 PM
Wash, clay bar, polish and wax

danewilson77
06-12-2011, 05:05 PM
Up,wiped the car down,put the mirror covers and "bra" on....going to Dane's to say by for now :(......what awesome people, and the cars ain't bad either!....9.5hours home....if traffic is ok!

Sent from my PC36100 using Tapatalk

Thanks Gary. You were an absolute joy to be around.

What did I do for my zhp? I gave justin (Horney) a ride in the zhp.....and he acted like the little piggy in the Geico commercial......weeeee.eeeeeeee.weeeeeeeeee....lol .

And.....I sold the stock black cube trim to Eduardo....and it looks delicious in his 325I....

Droid + Tapatalk = FTW!

kayger12
06-12-2011, 05:26 PM
Thanks Gary. You were an absolute joy to be around.

What did I do for my zhp? I gave justin (Horney) a ride in the zhp.....and he acted like the little piggy in the Geico commercial......weeeee.eeeeeeee.weeeeeeeeee....lol .

And.....I sold the stock black cube trim to Eduardo....and it looks delicious in his 325I....

Droid + Tapatalk = FTW!

Keith Likes This.

az3579
06-12-2011, 06:01 PM
A little late to this party as this was done Friday, but...


Style 71's are on and rockin' my socks.

danewilson77
06-13-2011, 12:01 PM
Rolled fenders flush today and put the 3 mm's back on. I could prolly get 10mm's on back there now.

GSEN820
06-13-2011, 12:17 PM
Rolled fenders flush today and put the 3 mm's back on. I could prolly get 10mm's on back there now.


I rolled my fenders was running 15 mm rear and 20 mm in the front. I had a little rub that I could not roll out. I ended switching to 15mm in the front and 12 mm in the rear no rub. The wheels were really flush. I am on H&R cup kit with Race springs

cakM3
06-13-2011, 03:07 PM
Congrats, Adam.

Shark, ftw.

Droid X. Tapatalk. Use it.

^
+2 :thumbsup


Just put in 6000k lighting except for the fogs (waiting on the HID kit)

GSEN820
06-13-2011, 03:39 PM
I debated wether I should trade it in today for

http://losangeles.craigslist.org/wst/cto/2436538758.html

I would have to sell a house with everything in it just to come close to what is asking.......

Stu
06-13-2011, 04:39 PM
I had Bosch Icons, I got rid of them after the Mafia Meet. They drove me up the wall in the rainstorm on the way home. Two hours of this loud "slap, slap, slap, slap, slap" almost every time the blade flipped for the downswipe. What made it more annoying is when it didn't make the noise, because then I couldn't at least get used to the noise since it was random.

I refunded them from Amazon and got BMW Evo Flat blades from the dealer. $15 more, and they are infinitely better. Totally dead-silent, work even better than the Icons, and the wiper blade arm seems to support the blade itself which eliminates chattering.

danewilson77
06-13-2011, 05:14 PM
Also (In addition to rolling rear fenders) I installed and Beta-Linked the splitters I bought from Rob.......

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC04591.jpg

And then I put my Blue/White OEM badges back on......

Then the day came to a close......

http://i1015.photobucket.com/albums/af278/nicee46/Home%20stuff/DSC04603.jpg

Sockethead
06-13-2011, 05:21 PM
What did I do for my zhp? I gave justin (Horney) a ride in the zhp.....and he acted like the little piggy in the Geico commercial......weeeee.eeeeeeee.weeeeeeeeee....lol .


Dane, you may be on to something.... Kristen was making that same noise when whe was driving my ZHP....:scratchinghead

Kudos
06-13-2011, 05:38 PM
Proper spark plugs, and cleaned the valve cover. noticed i have a leak from one of the bushings as well as front of vcg. time for a project with a vanos rebuild while were at it. Anyone in the chi interesting in giving a helping hand?

Stu
06-14-2011, 02:45 PM
Took apart my passenger door trim, for the last time EVER (because I HATE IT), to add some new anti-rattle trim clips to get rid of some damn rattling clips at the bottom of the door. Drove me nuts to listen to.

Ahhhh, the silence.

goofiefoot
06-15-2011, 07:37 AM
Washed (touchless automatic), dried (bought new microfiber towels), vacuumed, dressed trim, polished exhaust tips.

Looks good, but it will look so much better once I get some clay, sealant and wax after it. All it takes is time and money, right?

Stu
06-15-2011, 08:52 AM
Washed (touchless automatic), dried (bought new microfiber towels), vacuumed, dressed trim, polished exhaust tips.

Looks good, but it will look so much better once I get some clay, sealant and wax after it. All it takes is time and money, right?

Yup, pretty much. Having someone fully detail your car is like...crazy expensive. You can do it yourself for a grand total of $35 and a few hours. $12 for polishing compound, $15 for wax, and $8 for a good six pack :)

goofiefoot
06-15-2011, 09:32 AM
Nice.

bsurloff
06-15-2011, 10:09 AM
As a former detailer I am a really big fan of Griots garage products, they are not crazy expensive, easy to use and most of all great results..I use their orbital waxer as well, saves so much time and is must more consistant than hand waxing..

Sockethead
06-15-2011, 01:57 PM
Hosed off the thousands of bugs collected from the round trip to the meet and washed. The car is almost perfect right now... gotta think up more stuff to do :scratchinghead

RITmusic2k
06-15-2011, 02:35 PM
Did my first oil change this past Saturday; can't believe I've put 7,500 miles on the car in 5 months of ownership (almost exactly to the day, even). I guess I've been volunteering to drive a lot more than usual :)

cakM3
06-15-2011, 02:39 PM
Washed it :biggrin

kayger12
06-15-2011, 03:23 PM
Washed it :biggrin

Mine still has remnants of Williamsburg dust on her. I don't want to wash her yet- it's all I have left...

Sniffle, sniffle.

Droid X. Tapatalk. Use it.

Stu
06-15-2011, 03:26 PM
Was gonna wash it due to all the Williamsburg bugs and road grime on the way home from the rain, but it's gonna rain tomorrow so it's pointless. There're some big ol' cicadas and wasps in my bumper grill :biggrin

My yellow oil light comes on from time-to-time when I turn off the engine, but my oil is still between the marks, albeit a bit closer to the low side. It must have eaten some from the Mafia meet and all that flooring it I did in one day :shift

az3579
06-16-2011, 03:12 AM
Was gonna wash it due to all the Williamsburg bugs and road grime on the way home from the rain, but it's gonna rain tomorrow so it's pointless. There're some big ol' cicadas and wasps in my bumper grill :biggrin

My yellow oil light comes on from time-to-time when I turn off the engine, but my oil is still between the marks, albeit a bit closer to the low side. It must have eaten some from the Mafia meet and all that flooring it I did in one day :shift

Weird, my oil light is coming on as well, but what's weirder is that one day it's full, the next it's right at the lower marker, and the third day it's right in between. WTF?
Time for a new sensor, methinks.

Sockethead
06-16-2011, 06:27 AM
Weird, my oil light is coming on as well, but what's weirder is that one day it's full, the next it's right at the lower marker, and the third day it's right in between. WTF?
Time for a new sensor, methinks.
When mine does that, I just pour 3/4 of a quart in regardless and the light goes away... ;)

kpro
06-16-2011, 06:36 AM
Im not washing williamsburg off my car til the threat of rain is gone...I still have a clump of dirt on the lip of my wheel, lol. im going to throw speakers in on lunch ;)

Ryans323i
06-16-2011, 07:15 AM
When mine does that, I just pour 3/4 of a quart in regardless and the light goes away... ;)

Can't you add too much oil, and hurt the car?


Im not washing williamsburg off my car til the threat of rain is gone...I still have a clump of dirt on the lip of my wheel, lol. im going to throw speakers in on lunch ;)

What speakers?

kpro
06-16-2011, 07:21 AM
Sockethead gave me a set of Harmon Kardon speakers :) Mine are crackling and sound like poop.

danewilson77
06-16-2011, 07:50 AM
Sockethead gave me a set of Harmon Kardon speakers :) Mine are crapping and smell like poop.

Fixed

Droid + Tapatalk = FTW!

Sockethead
06-16-2011, 02:05 PM
Can't you add too much oil, and hurt the car?
yea, there comes a point where too much is a bad thing but a 1/4 ~1/2 qt isn't going to hurt it...

kpro
06-16-2011, 02:17 PM
Fixed

Droid + Tapatalk = FTW!

Dane! :hi

cakM3
06-16-2011, 02:30 PM
washed it......again :biggrin

danewilson77
06-16-2011, 02:32 PM
Dane! :hi

Sup?

Droid + Tapatalk = FTW!

SoarinZHP
06-16-2011, 02:38 PM
I washed and applied Liquid Glass to mine for the 2nd time. The previous owned used automated car washes on mine and there was residue building up on the lower 3rd of the doors and rocker panels. I got all that contamination off with WD-40 before I applied the LG last time.

At any rate... Today I made a promise to my car: From here on out it will always be hand washed and will never see an automated carwash again for as long as we both shall live...

3ZHP
06-16-2011, 03:29 PM
Put my McGard wheel locks back on today.

cakM3
06-16-2011, 06:28 PM
Got new floor mats and license plate frames

coby1
06-17-2011, 07:32 AM
Washed, sealer,coils.if you have never used any sealer do it,stuff keeps the paint looking brand new for months.

TRELO
06-17-2011, 10:20 AM
http://tapatalk.com/mu/a6898ea5-9acd-e916.jpg


Opa iPhone

Marcus-SanDiego
06-17-2011, 10:25 AM
What kind of exhaust you getting?

TRELO
06-17-2011, 12:20 PM
http://tapatalk.com/mu/45d36b03-b704-1446.jpg

Magnaflow 3" dual tip


Opa iPhone

Marcus-SanDiego
06-17-2011, 12:23 PM
Nice. Looks good!

TRELO
06-17-2011, 12:27 PM
Nice. Looks good!

Thanks! Just painted the muffler flat black. Now all you can see is 2 big tips


Opa iPhone

cakM3
06-17-2011, 12:28 PM
Trelo, looks nice!

goofiefoot
06-17-2011, 12:47 PM
Sweet!

az3579
06-17-2011, 12:57 PM
Trelo,
Could you please post a sound byte? I heard a Magnaflow on a 325i but none on a ZHP yet...
Pleeeeeeeeease? I'm looking to purchase a Magnaflow system. Also if you can, please let me know what the model # is.

Thanks in advance...

3ZHP
06-17-2011, 01:02 PM
I finished my wax job; clay-bared the rockers and front bumper, then I waxed those and the roof + redid the hood & deck lid with Meguiar's Gold Class™ Carnauba. When I finished I did another photo shoot. Here's one of the shots, more to follow in the photo section.

http://i591.photobucket.com/albums/ss351/3zhpguy/2011/The%20Mill%20June%202011/TheMillMoreJune2011_38.jpg

az3579
06-17-2011, 01:06 PM
I just came back from invading my car's privacy to check compatibility for an upcoming upgrade (very soon... this weekend soon).

romanred62
06-17-2011, 04:51 PM
I installed a new window regulator in the passenger door.

danewilson77
06-17-2011, 05:59 PM
Wash, Wax, Wolfgangs 3.0 paint sealant.....so I can rep the mafia at the C&C Williamsburg Winery tomorrow.

zhpnsnv
06-18-2011, 03:23 AM
Getting the pilot supersports mounted. I'll review/compare to the extremecontact dw in the tire section in a few hundred miles.

By the way, Mark: that stupid tirebuyer.com HAD THE DW THIS ENTIRE TIME!!!! I just want to thank you for telling me about it after i bought 4 new tires. Hahahaha

Seriously, tirebuyer looks promising. Spoke to them on the phone. Definite alternative to tirerack considering free shipping.

Sent from my iPhone using Tapatalk

zhpnsnv
06-18-2011, 06:24 AM
They chipped/scratched my newly refinished rims. They're paying for the touch up.

In other news, the supersports feel friggin' awesome, and they look beefier out back. Pics later.

kayger12
06-18-2011, 06:56 AM
They chipped/scratched my newly refinished rims. They're paying for the touch up.

In other news, the supersports feel friggin' awesome, and they look beefier out back. Pics later.

For the love of God, you can't catch a break...

SC4ME
06-18-2011, 07:19 AM
Last weekend a bit more PM.

Ritual Oil Change, its been about 8k mi so past time for me. Now I get to look up the code clear routine (first time I get to do it - just came off warranty)

New spark plugs. It was much easier than expected. I have to say, so far everything I have done to this car has been relatively easy considering access to common parts, ease of removal, etc.

Here are what plugs look like around 100k mi (unless they did a plug change at 40k mi when I bought it CPO).

http://i285.photobucket.com/albums/ll47/SC4ME/100kmisparkplugs.jpg

And the finished product, almost.

http://i285.photobucket.com/albums/ll47/SC4ME/IMG_0203.jpg


Still waiting on my brake pads to wear down so I can install my new rotors.

kayger12
06-18-2011, 10:59 AM
Here are what plugs look like around 100k mi (unless they did a plug change at 40k mi when I bought it CPO).

http://i285.photobucket.com/albums/ll47/SC4ME/100kmisparkplugs.jpg



Holy carbon buildup, Batman!

Sockethead
06-18-2011, 11:05 AM
Holy carbon buildup, Batman!

Yea, it looks like you might be running a little rich... Even at 100k, the plug's insulator should be light brown in color.. 100K is time to change O2 sensors..

Sockethead
06-18-2011, 11:24 AM
Drove though road construction where they were cutting the cement with water cooled cutting wheels. When I got home, the bottom of my car looked like this. Had to jack it up, take the wheels off and pressure wash the cement off the bottom of the car and the whell wells... it sucked.

The pic is the bottom of my rocker panels... it's supposed to be black. Yes that is cement

http://i424.photobucket.com/albums/pp325/r_powell123/IMG_0185.jpg

danewilson77
06-18-2011, 11:57 AM
The pic is the bottom of my rocker panels... it's supposed to be black. Yes that is cement

http://i424.photobucket.com/albums/pp325/r_powell123/IMG_0185.jpg

Ummmm...come again?

Droid + Tapatalk = FTW!

kayger12
06-18-2011, 12:35 PM
Drove though road construction where they were cutting the cement with water cooled cutting wheels. When I got home, the bottom of my car looked like this. Had to jack it up, take the wheels off and pressure wash the cement off the bottom of the car and the whell wells... it sucked.

The pic is the bottom of my rocker panels... it's supposed to be black. Yes that is cement

http://i424.photobucket.com/albums/pp325/r_powell123/IMG_0185.jpg

Gawd, that sucks!

Sockethead
06-18-2011, 01:16 PM
Ummmm...come again?

Droid + Tapatalk = FTW!
The cement dust mixed with water turnes back into cement.. I ran through it prolly for a mile or so... coated the bottom of the car and the wheel wells

zhpnsnv
06-18-2011, 01:21 PM
For the love of God, you can't catch a break...

Seriously. All this does is push back the time frame for the Mini to get the TLC it needs.

danewilson77
06-18-2011, 01:56 PM
Damn....sorry to hear.

Droid + Tapatalk = FTW!

cakM3
06-19-2011, 04:38 AM
Swapped cars and put the ZHP in the garage over the weekend. Driving the ///M :biggrin

Whitexi
06-19-2011, 06:32 AM
Hooked up the angel eyes to my foot well lights. So now there on when the cars running and when the cars off and I open a door :biggrin

Whitexi
06-19-2011, 06:35 AM
Wash, Wax, Wolfgangs 3.0 paint sealant.....so I can rep the mafia at the C&C Williamsburg Winery tomorrow.

Dane your not supposed to wax or seal the paint for at least a couple months if you just had a respray.

danewilson77
06-19-2011, 06:49 AM
Dane your not supposed to wax or seal the paint for at least a couple months if you just had a respray.


It is what it is. I guess we're going to find out what happens...lol.

Droid + Tapatalk = winning

zhpnsnv
06-19-2011, 07:46 AM
Added horsepower:

http://tapatalk.com/mu/a6898b08-19bb-74d1.jpg

http://tapatalk.com/mu/a6898b08-19d3-d061.jpg


Sent from my iPhone using Tapatalk

Whitexi
06-19-2011, 07:49 AM
Oh I see, stealth mode. I put mine on my rear license plate bracket.

kayger12
06-19-2011, 07:56 AM
Added horsepower:

http://tapatalk.com/mu/a6898b08-19bb-74d1.jpg

http://tapatalk.com/mu/a6898b08-19d3-d061.jpg


Sent from my iPhone using Tapatalk

Win.

Droid X. Tapatalk. Use it.

GMATT
06-19-2011, 08:33 AM
Marc.............That should be worth at least 10 HP..........LOL love the stealth look!

GMATT
06-19-2011, 08:36 AM
Polished my headlight lenses, they look pretty good, will replace them later this year. Also another round with Dr, Colorchip and another coat of Zaino!

zhpnsnv
06-19-2011, 08:39 AM
Marc.............That should be worth at least 10 HP..........LOL love the stealth look!

Thanks. Got the idea from your car.


Sent from my iPhone using Tapatalk

Oli77
06-19-2011, 01:43 PM
Took care of the my sagging A pillars (again). I had done them about a year ago with the wrong glue.

This time I used the 3M - 90 stuff and instead of re-stretching/ gluing the old material, I got some black material at a local fabric store.

Here you go: a la Dane (I believe Dane had done something like that on the old Tiag).

http://i900.photobucket.com/albums/ac208/othibau/DSC06766.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06767.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06768.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06769.jpg

Whitexi
06-19-2011, 01:49 PM
Looks good Oli, I used the 90 spray also when I recovered mine in suede.

Oli77
06-19-2011, 01:58 PM
Thanks whiteXI, the material I got is a little like suede. I like it a lot.

static667
06-19-2011, 04:55 PM
What did I do for my zhp? I gave justin (Horney) a ride in the zhp.....and he acted like the little piggy in the Geico commercial......weeeee.eeeeeeee.weeeeeeeeee....lol .

Droid + Tapatalk = FTW!

Can I haz ride in teh Imola ZHP when u comez down in July?

Sent using Tapatalk on my rooted Droid. Wut?

nike001
06-19-2011, 05:43 PM
I was actually looking at what i thought were normal 'scratches' on my hood today that I remember having for a while, but were definitely not there when i got the car.

After really looking at them in the sun, i concluded that they were marks from a key. So i got keyed. Don't know when..but it was a while ago so idk. I noticed a distinct X on my hood and about a 2 inch scratch down after that. Then about a 3 inch one on my trunk. They weren't deep at all.. so i go out mothers scratch remover and went to work. I think I got them for the most part...but i'm unsure. i hate people.

cakM3
06-19-2011, 05:50 PM
After spending the day shopping with my daughter I got to install my tow hook license plate mount from gominigo.com. :roundel

A few shots of the install - hope you guys/gals don't mind my sharing :biggrin

30-38mm kit
http://i395.photobucket.com/albums/pp37/macdctr/Pic2-2.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Pic5-1.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Pic15-2.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Pic16-1.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Pic13-1-1.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Pic10-1-1.jpg

http://i395.photobucket.com/albums/pp37/macdctr/Pic17-1.jpg

I found the kit to be of good quality - thanks botond for the link (from other post) :applause

danewilson77
06-19-2011, 08:11 PM
Looking good my friend.

Droid + Tapatalk = FTW!

danewilson77
06-19-2011, 08:13 PM
Took care of the my sagging A pillars (again). I had done them about a year ago with the wrong glue.

This time I used the 3M - 90 stuff and instead of re-stretching/ gluing the old material, I got some black material at a local fabric store.

Here you go: a la Dane (I believe Dane had done something like that on the old Tiag).

http://i900.photobucket.com/albums/ac208/othibau/DSC06766.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06767.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06768.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06769.jpg

Damn that makes me miss my car. That really came out good.

Droid + Tapatalk = FTW!

cakM3
06-20-2011, 02:00 AM
Looking good my friend.

Droid + Tapatalk = FTW!

Thanks Dane! Workin' the ZHP one step at a time :thumbsup Will keep you posted when I get my OEM ///M3 mirrors mounted. Getting them painted out in glossy black...:biggrin

danewilson77
06-20-2011, 03:12 AM
Thanks Dane! Workin' the ZHP one step at a time :thumbsup Will keep you posted when I get my OEM ///M3 mirrors mounted. Getting them painted out in glossy black...:biggrin

I thought you were an Imola?

Droid + Tapatalk = FTW!

cakM3
06-20-2011, 05:27 AM
I thought you were an Imola?

Droid + Tapatalk = FTW!

car is Imola but I decided to paint out my side mirrors black rather than going Imola. I'm thinking having the glossy black side mirrors will complement the Imola well....what do you think?

billschusteriv
06-20-2011, 05:29 AM
Took care of the my sagging A pillars (again). I had done them about a year ago with the wrong glue.

This time I used the 3M - 90 stuff and instead of re-stretching/ gluing the old material, I got some black material at a local fabric store.

Here you go: a la Dane (I believe Dane had done something like that on the old Tiag).

http://i900.photobucket.com/albums/ac208/othibau/DSC06766.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06767.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06768.jpg

http://i900.photobucket.com/albums/ac208/othibau/DSC06769.jpg

Looking good Oli. Love it!

Oli77
06-20-2011, 05:50 AM
Thanks Dane and Bill. Got the idea of keeping the little strip grey from Dane on older posts.

I like it too. I'll tackle the C pillars next.

danewilson77
06-20-2011, 08:22 AM
car is Imola but I decided to paint out my side mirrors black rather than going Imola. I'm thinking having the glossy black side mirrors will complement the Imola well....what do you think?

I think it will look good............I wanna see it when done....

I had black mirror before.....not ///M3 though.

http://i1015.photobucket.com/albums/af278/nicee46/Imola%20Bimmer/DSC03040sz1200.jpg

cakM3
06-20-2011, 11:41 AM
Dane,

I will post pics when complete. I think I will like black side mirrors...yours looked good. :thumbsup

az3579
06-20-2011, 03:14 PM
I too installed a gominigo kit today. Pics up in the DIY section.

Sent from my DROIDX using Tapatalk

SC4ME
06-20-2011, 04:14 PM
Yea, it looks like you might be running a little rich... Even at 100k, the plug's insulator should be light brown in color.. 100K is time to change O2 sensors..

I should have described the plugs a bit since the exposure makes them look much darker.
When viewing in daylight, the deposits were more a light-gray with definite yellowish/green tinge to the grayness.

And the butt-dyno reads at least a 5-10 hp improvement!!

Now if only they had that nifty sticker, I could have gained another Hp or two!!

Newjack
06-21-2011, 02:03 PM
Just changed out my serpentine belt and AC belt on my car. Both tensioner pulleys still sound great, but the idler pulley will be replaced among other things when I hit 100K miles soon. ( It's sounds a little like a worn roller skate)

danewilson77
06-21-2011, 03:04 PM
Just changed out my serpentine belt and AC belt on my car. Both tensioner pulleys still sound great, but the idler pulley will be replaced among other things when I hit 100K miles soon. ( It's sounds a little like a worn roller skate)

Save the old...good parts for emergencies.

Droid + Tapatalk = FTW!

GMATT
06-21-2011, 03:59 PM
Silkolen the engine bay and used a lint roller (LOL) on the under hood felt pad. Believe it or not, the lint roller worked great!

danewilson77
06-21-2011, 04:22 PM
Silkolen the engine bay and used a lint roller (LOL) on the under hood felt pad. Believe it or not, the lint roller worked great!

Where did you get the silkolen?

Droid + Tapatalk = FTW!

GMATT
06-21-2011, 05:05 PM
Where did you get the silkolen?

Droid + Tapatalk = FTW!

Went through our sponsor page (http://www.zhpmafia.com/forums/showthread.php?229-List-of-Affiliate-Advertisers-at-ZHP-Mafia) and found it @ Amazon.com................do you need some? I was not sure how much I needed and bought 6 cans...........

danewilson77
06-21-2011, 06:20 PM
Went through our sponsor page and found it @ Amazon.com................do you need some? I was not sure how much I needed and bought 6 cans...........

I would love to purchase 2 cans from you, if you want to unload some.

Droid + Tapatalk = FTW!

static667
06-21-2011, 06:22 PM
I would love to purchase 2 cans from you, if you want to unload some.

Droid + Tapatalk = FTW!

For some reason, the scanner keeps jamming on the upload part...

My window regulator came in today. W00t!

johnrando
06-21-2011, 10:17 PM
Silkolen the engine bay and used a lint roller (LOL) on the under hood felt pad. Believe it or not, the lint roller worked great!

Not familiar with Silkolen, and the website doesn't really say much. What part of the engine do you use it on?

danewilson77
06-22-2011, 02:06 AM
Not familiar with Silkolen, and the website doesn't really say much. What part of the engine do you use it on?

Pretty much everything under the hood. I saw it in action during the meet. It was amazing stuff.

GMATT
06-22-2011, 03:19 AM
Not familiar with Silkolen, and the website doesn't really say much. What part of the engine do you use it on?

Not much info on how to use. What I did was coat everything under the hood (paint to) and then waited a couple of hours and wiped off the excess. The engine bay rivals new now! I did clean most of the underside hood area first. It is not cheap ($11.00 a can with shipping) but amazing results.

danewilson77
06-22-2011, 03:25 AM
I would love to purchase 2 cans from you, if you want to unload some.

Droid + Tapatalk = FTW!

Bump.

GMATT
06-22-2011, 03:28 AM
Bump.

Check your inbox!:)

Sockethead
06-22-2011, 04:33 AM
Not much info on how to use. What I did was coat everything under the hood (paint to) and then waited a couple of hours and wiped off the excess. The engine bay rivals new now! I did clean most of the underside hood area first. It is not cheap ($11.00 a can with shipping) but amazing results.

Yep, Just spay it on everything because it's also a protective coating. Hoses, aluminum, painted surfaces, everything ...You can wipe it off right away... No need to hosedown the engine bay first, if there is s a lot of dirt just wipe it off the best you can and then spary.
You can slo use it on the interior plastic as well... any hard plastic like the kick panels door sills plastic by the seat controls, hard plastic on the steeering wheel hub, etc. Just wipe the excess off. or sray it on a rag and use it like that

You can also check with you local motorcycle shop to see if they have it because it's really for motorcycles... My local shop has it for $9.00

johnrando
06-22-2011, 11:59 AM
Check your inbox!:)

OK, love a clean looking engine bay. If you have an extra can that you don't need I'll buy one from you.

CERF04ZHP
06-22-2011, 01:30 PM
1280

Here's to 120 more!

Sent from my HTC EVO using Tapatalk.

Marcus-SanDiego
06-22-2011, 01:46 PM
^^congrats.

danewilson77
06-22-2011, 03:30 PM
1280

Here's to 120 more!

Sent from my HTC EVO using Tapatalk.

Very nice. Welcome to Club 120k.

Droid + Tapatalk = FTW!

lilcdkey
06-22-2011, 03:42 PM
hit 48,585 miles. I've now driven 2k miles since i bought the car

MOTOROLA ATRIX TAPATALK

Crickett
06-22-2011, 03:55 PM
Haven't done anything for my Z . . . yet! But look what came in the mail today! :roundel


Tapatalk on Jailbroken iOS: dhu eet!

danewilson77
06-22-2011, 04:01 PM
I ordered.......

Droid + Tapatalk = FTW!

GSEN820
06-22-2011, 04:07 PM
1282

Added a sticker!!!!!!!!!!!!!!!

Marcus-SanDiego
06-22-2011, 04:20 PM
2M started a new business. Glad to see they're up and running.

GSEN820
06-22-2011, 04:33 PM
Thats right Boss man they have some new things in the WERKS


I asked for a shirt and got 2 stickers

Marcus-SanDiego
06-22-2011, 04:39 PM
Thats right Boss man they have some new things in the WERKS


I asked for a shirt and got 2 stickers

How nice. I wonder what happens if you ask for two stickers.

GSEN820
06-22-2011, 04:41 PM
Ill ask Saturday when i meet up with Dave

az3579
06-22-2011, 06:03 PM
Haven't done anything for my Z . . . yet! But look what came in the mail today! :roundel


Tapatalk on Jailbroken iOS: dhu eet!

Eh, now you're in trouble! :biggrin

billschusteriv
06-22-2011, 06:29 PM
I ordered.......

Droid + Tapatalk = FTW!

What?

BlackBerry. Tapatalk. Fixed.

danewilson77
06-22-2011, 06:45 PM
What?

BlackBerry. Tapatalk. Fixed.

Muhahahahahahaha.........

Droid + Tapatalk = FTW!

Oli77
06-23-2011, 04:28 AM
Dane, your such a tease!:rolleyes

danewilson77
06-23-2011, 07:54 AM
I think I put one item in my project thread. Going there now to put in second, third and fourth items....

GSEN820
06-23-2011, 08:42 AM
Reconfirm an order that was placed.

danewilson77
06-23-2011, 09:07 AM
Reconfirm an order that was placed.

huh?

Marcus-SanDiego
06-23-2011, 09:15 AM
Gary ordered a part a while ago. He reconfirmed the order.

danewilson77
06-23-2011, 09:19 AM
Gary ordered a part a while ago. He reconfirmed the order.

Werd.

MsRN
06-23-2011, 07:20 PM
Wash, dry, clay bar...

mimalmo
06-23-2011, 09:58 PM
Changed the brakes on one side.... caliper bolt kicked my ass on the other side. Screw it, I'm going to bed and finishing in the morning.

Newjack
06-24-2011, 05:54 PM
M1 0W-40 oil change. Napa has a sweet deal on M1 oil right now. $5 per quart if you buy a case. Kudos to danewilson77 for the tip.

danewilson77
06-24-2011, 05:58 PM
Pick up de cases. I gots 3!!!!!

Johal E32
06-24-2011, 06:15 PM
Today... I only walked by it and admired:o it as I have for the last week or so. I don't drive it much

zhpnsnv
06-25-2011, 04:15 AM
Got a quote for a tint and clearbra. Now I need to investigate respray of front.


Sent from my iPhone using Tapatalk

Alphatek45
06-25-2011, 04:44 AM
Got a quote for a tint and clearbra. Now I need to investigate respray of front.


Sent from my iPhone using Tapatalk

I just got a quote for a full front respray ( hood taken down to bare metal) fenders wet sanded and sprayed, and bumper. $1,000.00


From a place that comes highly recommended. 5 year warranty.
Hope this helps.

How much for the clear bra?

kyfdx
06-25-2011, 09:49 AM
I just got a quote for a full front respray ( hood taken down to bare metal) fenders wet sanded and sprayed, and bumper. $1,000.00


From a place that comes highly recommended. 5 year warranty.
Hope this helps.

How much for the clear bra?

Last year, got a quote for that for $1200.. from the local body shop that the dealer recommends...

zhpnsnv
06-25-2011, 10:27 AM
Clearbra plus all windows tinted = 900


Sent from my iPhone using Tapatalk

danewilson77
06-25-2011, 10:41 AM
I made room on my car for new Strut bar. Installed mine on Johns car. Perfect match!

Johnmadd
06-25-2011, 11:00 AM
I made room on my car for new Strut bar. Installed mine on Johns car. Perfect match!

Got the strut bar from Dane today, and he even hooked it up for me on the spot.

http://i1210.photobucket.com/albums/cc407/johnmadd1979/2011-06-25_14-44-59_753.jpg

Alphatek45
06-25-2011, 11:02 AM
^ Noice

danewilson77
06-25-2011, 11:31 AM
^ Noice

Damn straight.

HTC Thunderbolt+TT

GMATT
06-25-2011, 12:02 PM
Got my...........in the mail:)

Sent from my PC36100 using Tapatalk

GMATT
06-25-2011, 12:12 PM
NYS plate.....http://tapatalk.com/mu/b8f067ec-412d-72f7.jpg

Sent from my PC36100 using Tapatalk

danewilson77
06-25-2011, 12:14 PM
Looking good Matt.

HTC Thunderbolt+TT

Alphatek45
06-25-2011, 12:14 PM
Still can't believe NY went back to the 70's yellow!

GMATT
06-25-2011, 12:20 PM
Still can't believe NY went back to the 70's yellow!

Not only that, but the plate is not embossed,just painted on the thinnest piece of aluminum I have seen! I could have made my own and done that kind of job. Oh and I get to give NYS $60.00 extra when I renew!

3ZHP
06-25-2011, 01:02 PM
I bathed her with the new Boar's Hair Brush I got for Father's Day.

Johnmadd
06-25-2011, 03:22 PM
Is that blood in your washer tank? :biggrin

Oh, it's not regular either, it's :tiger




Actually it's that orange fluid from rain-x.

cakM3
06-25-2011, 06:10 PM
I parked my ZHP and ///M outside so BP could use my garage...:biggrin

kayger12
06-25-2011, 06:11 PM
I parked my ZHP and ///M outside so BP could use my garage...:biggrin

Now that's a class act.

Way to help the Family out.

Droid X. Tapatalk. Use it.

Marcus-SanDiego
06-25-2011, 06:11 PM
Is BP there now?

danewilson77
06-25-2011, 06:40 PM
Installed HTC Thunderbolt GPS mount in car.

Crickett
06-25-2011, 07:30 PM
Read (& saved the config files for) all of my ZHP's modules in NCS-Expert . . . coding to come after some research & Geman-to-English translations!

cakM3
06-26-2011, 08:35 AM
Is BP there now?

Hey Marcus,

Yeah, BP spent the night at my place while I helped him with paint correction/detail. Turned out awesome! Also learned what to expect when I convert my side mirrors to OEM M3 mirrors which should be within a few weeks. Mirror body out at paint shop for painting right now. It was nice and BP also coded my ///M so all is good...:thumbsup

cakM3
06-26-2011, 08:36 AM
Now that's a class act.

Way to help the Family out.

Droid X. Tapatalk. Use it.

Thanks K :thumbsup

That's what it's all about :biggrin

Marcus-SanDiego
06-26-2011, 09:11 AM
Hey Marcus,

Yeah, BP spent the night at my place while I helped him with paint correction/detail. Turned out awesome! Also learned what to expect when I convert my side mirrors to OEM M3 mirrors which should be within a few weeks. Mirror body out at paint shop for painting right now. It was nice and BP also coded my ///M so all is good...:thumbsup

Good to hear. And good luck on the M3 mirror install.

cakM3
06-26-2011, 10:05 AM
Thanks Marcus.....I'll need it :biggrin

BP will be taking pics while I'm doing this mod...We were thinking of making up a detailed "ribbon" OEM M3 side mirror retrofit DIY since there's limited information on the subject. I know from helping BP sort out his passenger side mirror, there were moments of "frustration" until we got it to work.

I'd like to share with the community so I think this will be a good first DIY. The next DIY I'm planning to do is the ZKW FX-R retrofit since my passenger ZKW bowl is getting burned out. Getting close to a point where I will have to replace the headlight anyway and since I have a set of FX-R projectors here...I figured why not use these to retrofit my headlights...:biggrin

Marcus-SanDiego
06-26-2011, 10:09 AM
Charlie, sounds good on any and all DIYs you do.

cakM3
06-26-2011, 11:21 AM
Okay then, I will be working on the OEM M3 ribbon motor retrofit DIY. I plan to have lots of pics and explanations. Some of them being "FYI" so others trying to do this mod will know what's in store for them. Hopefully this DIY will be easy to follow and help others who will like to do this. I had BP follow me this morning and I can tell you that this is one sick mod...:drool

For those who are timid I will try to explain every step so that it is easy to follow. For me, pictures is everything so when reading each step an associated pic will really help here....

When I get this DIY done with BP's help, any feedback will be appreciated. :thumbsup Everyone, please bear with me as time is not a luxury I currently have. I'm in finals for my current college term and with a 40 hr work week it's been hectic...:biggrin

DIY will eventually be posted though :thumbsup

Crickett
06-26-2011, 03:58 PM
Got my car coded to not require the clutch to be depressed to start, & to allow rolling up all of the windows with the key's lock button, but couldn't get the flat-tire monitor enabled. Now I'm getting DIS/GT1 installed . . . & trying to be patient as it installs!

az3579
06-26-2011, 05:27 PM
I GOT MY M3 MIRRORS TO WORK! After a year of having the car and not having working mirrors, THEY ARE BOTH FUNCTIONAL!
The driver's side started working not too long ago, but the adjustments are off (the mirror moves diagonally), but the passenger side now has a new motor (which I paid through the nose for). I adjusted the positioning, as the old motor was maladjusted as well (also moved diagonally in the 1cm distance it did move). Spent quite a lot of time trying to get it seated properly, but with Charlie's help, we prevailed! Thanks so much C...


Got my car coded to not require the clutch to be depressed to start, & to allow rolling up all of the windows with the key's lock button, but couldn't get the flat-tire monitor enabled. Now I'm getting DIS/GT1 installed . . . & trying to be patient as it installs!

Personally, I have found DIS/GT1 absolutely useless. I couldn't get it to communicate with my car at all, and I am able to do whatever I want with the other suite of software (NCS Expert, INPA, and eventually WinKFP).

PM me for the translations for NCS Expert.

cakM3
06-26-2011, 06:17 PM
I GOT MY M3 MIRRORS TO WORK! ... Spent quite a lot of time trying to get it seated properly, but with Charlie's help, we prevailed! Thanks so much C...

No problem BP! It was interesting to see the process myself since I will be doing this in the near future. I will be sure to enlist your help when that time comes :biggrin

BTW....your car looks awesome :drool:drool:drool Would look better with my trim though...:biggrin

Here are a few pics of BP's car when he stopped by over the weekend - very nice :thumbsup

alittle polishing - BP's in the foreground (inside my garage), my ZHP followed by the ///M outside
http://i395.photobucket.com/albums/pp37/macdctr/BPsDetailing-02-1.jpg

Clean rails - ahhhhhhhh :biggrin
http://i395.photobucket.com/albums/pp37/macdctr/BPsDetailing-03-1.jpg

following BP just before he headed out (nice reflection of BP's car on my hood)
http://i395.photobucket.com/albums/pp37/macdctr/IMG_1384-1.jpg
http://i395.photobucket.com/albums/pp37/macdctr/IMG_1385-2.jpg
http://i395.photobucket.com/albums/pp37/macdctr/IMG_1386-2.jpg

and the waveoff :thumbsup BP your ZHP looked really sharp :drool
http://i395.photobucket.com/albums/pp37/macdctr/Waveoff-1.jpg

carsontl
06-26-2011, 07:57 PM
i drove my zhp to the grocery store, that's what I did for her. Got 2 guys walking past the car rubber necked on it lol

if only they were women :(

cakM3
06-27-2011, 06:16 PM
placed updated pics of BP's ZHP on post#750

gr330zhp
06-27-2011, 06:49 PM
Changed my serpentine belt and finished detailing. Took it out for a ride. Damn, I love my car! :biggrin

Sent from my HTC Desire using Tapatalk

SC4ME
06-27-2011, 06:54 PM
Washed her on Saturday.

Then went to Mission Bay for some jet ski action. Fun day, legs are sore, and car has that salt haze.


Washed her again on Sunday and did a thorough wax as well.

All is well.

lilcdkey
06-27-2011, 11:27 PM
wax, painted lower grills, and the dealer finally got me the floor matts that they didn't have when i originally purchased the car. successful day.

Marcus-SanDiego
06-27-2011, 11:32 PM
Very nice, Zaid. Glad to hear.

midlandtech
06-28-2011, 12:39 PM
Blacked out grill and debaged wooooot =)

-- Sent from my Palm Pre using Forums (http://developer.palm.com/appredirect/?packageid=com.newnessdevelopments.forums)

billschusteriv
06-28-2011, 12:53 PM
Blacked out grill and debaged wooooot =)

Awesome! Pics or it didn't happen. :biggrin


BlackBerry. Tapatalk.