Need help ASAP

[d-rod]

I’m here installing my coby wheel and transferring over all part but found what looks like the ground wire severed ?? Never messed around with wire repair what should I do? My car is currently disabled with the steering wheel. What would happened if I install it like this ?? I don’t want an airbag light on or this thing to blow in my face ?! https://uploads.tapatalk-cdn.com/20181116/2b0353ad72fcc699b00a8cc4bf228e08.jpghttps://uploads.tapatalk-cdn.com/20181116/a8c460ac2cd2f4aa6c143f05893c0d63.jpg


Sent from my iPhone using Tapatalk

[Johnmadd]

Strip enough plastic off the wire to twist together and get some connectors or liquid electrical tape or regular electrical tape if that's good enough for you... if you tape it make sure it plenty tight. Soldering would also work and then something to protect the solder as mentioned above.

[Newjack]

Strip enough plastic off the wire to twist together and get some connectors or liquid electrical tape or regular electrical tape if that's good enough for you... if you tape it make sure it plenty tight. Soldering would also work and then something to protect the solder as mentioned above.

Shrink wrap and solder would be the more permanent option. Connectors would also work fine.

[Johnmadd]

Shrink wrap and solder would be the more permanent option. Connectors would also work fine.Agreed

Sent from my SM-N960U using Tapatalk

[BADCLOWN]

Easy fix, do the above suggestion