PDA

View Full Version : WTB Carbon fiber trim


ComradeNick
10-12-2018, 08:55 PM
Looking to to replace the black cube trim on my car, it has some light scratches and is slightly warped.

I'm looking for a glossy black trim set for a ZHP sedan as well as a matching CF lower and upper trim for the steering wheel. I'm ok with a vinyl wrap, as long as its done well and the set matches.

If anyone is selling a set, or knows a good place to get one let me know.
nextelbuddy
10-12-2018, 10:15 PM
dont get rid of the black cube. just get Black SATIN spray paint at home depot and it will get your black cube good as new again.
704sw
10-13-2018, 05:39 AM
dont get rid of the black cube. just get Black SATIN spray paint at home depot and it will get your black cube good as new again.

This.

If you want the steering wheels and other trims to match I’d suggest looking for a cheap set of wood trim and just wrapping everything yourself.
Sockethead
10-13-2018, 08:25 AM
If you want the steering wheels and other trims to match I’d suggest looking for a cheap set of wood trim and just wrapping everything yourself.

I did this in our old X5 with Di Noc to cover up the wood trim. It turned out pretty nice although the look isn't for everyone.
The e46 trim pieces aren't that complicated to wrap. If you do go this route, make sure you use a heat gun. There are many YouTube videos on how to do it and there are many Di Noc options these days.

34061

34062
WOLFN8TR
10-13-2018, 09:03 AM
I did the same exact CF 3M DINOC wrap on my 2500HD. It was this ugly wood grain trim and it had to go! It’s been on for over 4 years thru 120+ heat and a kid and still looks the same as the day I installed it. You can use a hairdryer instead of a heat gun.

Actually I would just buy this Gloss Black / Cosmo Black Trim Set.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F36 2454770344

https://uploads.tapatalk-cdn.com/20181013/c08a29abc20831f16106768695dbd4d0.png
ComradeNick
10-13-2018, 09:55 AM
This.

If you want the steering wheels and other trims to match I’d suggest looking for a cheap set of wood trim and just wrapping everything yourself.

I would wrap the trim, but the trim is bent on the piece left of the screen. That’s why I’m trying to get another set. I could get a wood set cheap and wrap that. But if someone already has one wrapped I wouldn’t mind paying a bit extra to save some time.


Sent from my iPhone using Tapatalk