FS e46 PDC Kit

[nextelbuddy]

SOLD - $250

For sale full e46 PDC Kit with both power and Sensor wire harness and 4 sensors with module.

- Module
- 4 sensors
- power wire harness
- Sensor wire harness
- Gong with wiring


normally this kit online only comes with the sensor harness but never the power harness since its integrated into the body harness of the car and the power harness is not available from BMW directly.

For coupes you need a full Mtech2 bumper for PDC

for Sedans you just need a center Trim piece from BMW for $44 https://www.ecstuning.com/b-genuine-bmw-parts/rubber-strip/51127893306/


I took the time to carefully pull each wire from the body harness to make the complete power harness along with the specific terminals as well.

this should be plug and play and can include the official BMW PDC Retrofit PDF that has the full install instructions.
https://uploads.tapatalk-cdn.com/20181001/7b8b2045fa334f49d4d3eec5aedde676.jpg
https://uploads.tapatalk-cdn.com/20181001/8800fc9f57817a4d2f48b50b56981f9f.jpg

[cakM3]

Shawn, I think I want this kit. I will call you tonight about it! [emoji1417]


Sent from my iPhoneX using Tapatalk Pro

[az3579]

Wow, this is unbelievably hard to find complete. Can you send me the retrofit guide? Also, do you have any spare gongs?

I have almost everything I need except the gong; most of the wiring has been laid inside the car up to the glovebox area but no idea how to connect it. I don't mind using the cluster piezo for the sound as long as I can get the wiring done.

[Tnhl1989]

When I did it to my zhp there were docs online for it. Then I use tis to confirm the wiring diagrams. Pretty easy overall and requires a few coding things done. Had it done on my zhp a long time ago now.
Wow, this is unbelievably hard to find complete. Can you send me the retrofit guide? Also, do you have any spare gongs?

I have almost everything I need except the gong; most of the wiring has been laid inside the car up to the glovebox area but no idea how to connect it. I don't mind using the cluster piezo for the sound as long as I can get the wiring done.

Sent from my Pixel 2 using Tapatalk

[nextelbuddy]

Wow, this is unbelievably hard to find complete. Can you send me the retrofit guide? Also, do you have any spare gongs?

I have almost everything I need except the gong; most of the wiring has been laid inside the car up to the glovebox area but no idea how to connect it. I don't mind using the cluster piezo for the sound as long as I can get the wiring done.

I'll have to check my parts bin but I think I do have a spare gone with the pigtails.

Here's a link to the PDF retrofit guy that I used to install my kit and somebody else's kit a while back

https://drive.google.com/file/d/0B_N4bT1QV9wcWjFKdW8wcm85Y0k/view?usp=drivesdk

[nextelbuddy]

SOLD

[cakM3]

SOLD

Thanks Shawn!!


Sent from my iPhoneX using Tapatalk Pro

[az3579]

Thanks Shawn!!


Sent from my iPhoneX using Tapatalk Pro

x2