ETAction
07-19-2018, 12:40 PM
Hey all,
Installed on my ZHP is the Rogue Engineering IKON axel back exhaust.
It's fine and sounds great, however this time around with my ZHP I would like to experience the factory exhaust.
So, if you have a stock ZHP exhaust laying around or have one installed and would like to swap it for this IKON exhaust then let's make a deal.
This fitment has been welded where it would normally clamp on some exhausts, so the welds will have to be broken and in order to use, will have to be welded into place.
Not looking to gain anything besides the factory exhaust.
Open to shipping. Open to deal.
Can provide pics and sound clips at request.
http://www.rogueengineering.com/Rogue-Engineering-E46-Ikon-Exhaust_p_234.html
-Eli
ETAction20@gmail.com
Installed on my ZHP is the Rogue Engineering IKON axel back exhaust.
It's fine and sounds great, however this time around with my ZHP I would like to experience the factory exhaust.
So, if you have a stock ZHP exhaust laying around or have one installed and would like to swap it for this IKON exhaust then let's make a deal.
This fitment has been welded where it would normally clamp on some exhausts, so the welds will have to be broken and in order to use, will have to be welded into place.
Not looking to gain anything besides the factory exhaust.
Open to shipping. Open to deal.
Can provide pics and sound clips at request.
http://www.rogueengineering.com/Rogue-Engineering-E46-Ikon-Exhaust_p_234.html
-Eli
ETAction20@gmail.com