FOR RENT: BAV AUTO Trailing Arm Bushing Tool

[Vas]

For rent is the Bavarian AutoSport Rear Trailing Arm Bushing Tool. This tool will remove and reinstall the real trailing arm bushings without removing the trailing arms from the vehicle. Works on both the E36 and E46 cars.


Terms Below:

7 day rental period (from when you receive it)
$30 dollar rental cost (includes shipping to you; sent as a "friend" payment is greatly appreciated.)
$70 deposit for tool
$20 for every additional week you keep the tool beyond the 2 week period

1) You paypal me $100 and I ship to you.
2) You use the tool(s) for one week or let me know if you'd like to extend the rental period.
3) You return tool to me with shipping tracking (you pay).
4) Once received and verified all is well you receive $70 back if shipped within 1 week window (or less if extended).
5) If any piece of the tool is returned damaged or not returned, I will hold the entire deposit.

PM me for more info and PayPal address.

[Newjack]

I wish I had this tool when I did my RTAB's. It was a pain using a custom tool and took a ton of extra time.

Thanks for loaning this out for other members Vas :thumbsup

[RUS_ZHP]

That's good to know.
I've done mine last year and had to go the longer way.
Now I know that Vas is offering his tool for rent.

Sent from my SM-G900V using Tapatalk

[d-rod]

I need to do mine, does anyone know if this tool will also work for the ball joints ? Or what I can use for them? Thank you all !

https://uploads.tapatalk-cdn.com/20180705/2ca48a4fb6305b3c326bbee86db51d5f.jpg

[Vas]

I need to do mine, does anyone know if this tool will also work for the ball joints ? Or what I can use for them? Thank you all !

https://uploads.tapatalk-cdn.com/20180705/2ca48a4fb6305b3c326bbee86db51d5f.jpgThis tool will only do the rtab in that image.

Hopefully soon I will be purchasing a tool set that will do the other ones since they are in need of replacement.

Sent from my Pixel 2 XL using Tapatalk

[RUS_ZHP]

+1. There is a special tool needed for upper and lower ball joints.
I used Koch toll for rear subframe that I rented from Shawn. I had to use buch on spacers, washers and some creativity. I almost ripped the rubber portion of the ball joint...so, let's say it was not ideal.
With the proper tool that job would be very easy

Sent from my SM-G900V using Tapatalk

[d-rod]

+1. There is a special tool needed for upper and lower ball joints.
I used Koch toll for rear subframe that I rented from Shawn. I had to use buch on spacers, washers and some creativity. I almost ripped the rubber portion of the ball joint...so, let's say it was not ideal.
With the proper tool that job would be very easy

Sent from my SM-G900V using Tapatalk

Alright guys I'm preparing to replace all 3 of these bushings/ball joint

I saw this video of a tool kit that made it look very simple. https://www.youtube.com/watch?v=cyLfedKkaBA

I couldn't really find that exact tool kit for sale, but bavauto has one that looks to be identical https://www.bavauto.com/bmw-b8800100 I've searched but I haven't seen anyone use the bavauto version. Have you guys seen or heard any feedback on the bavauto kit?

[RUS_ZHP]

Alright guys I'm preparing to replace all 3 of these bushings/ball joint

I saw this video of a tool kit that made it look very simple. https://www.youtube.com/watch?v=cyLfedKkaBA

I couldn't really find that exact tool kit for sale, but bavauto has one that looks to be identical https://www.bavauto.com/bmw-b8800100 I've searched but I haven't seen anyone use the bavauto version. Have you guys seen or heard any feedback on the bavauto kit?I didn't hear anything about this particluar set. Juggling by the picture, it should do the job.
I am sure some members will give you a feedback on this kit.
Good luck with the repair.

Sent from my SM-G900V using Tapatalk

[Vas]

Should do the trick.
Alright guys I'm preparing to replace all 3 of these bushings/ball joint

I saw this video of a tool kit that made it look very simple. https://www.youtube.com/watch?v=cyLfedKkaBA

I couldn't really find that exact tool kit for sale, but bavauto has one that looks to be identical https://www.bavauto.com/bmw-b8800100 I've searched but I haven't seen anyone use the bavauto version. Have you guys seen or heard any feedback on the bavauto kit?

Sent from my Pixel 2 XL using Tapatalk

[DeathTrap]

Vas,

I sent you a PM. :thumbsup

[d-rod]

Alright guys I'm preparing to replace all 3 of these bushings/ball joint

I saw this video of a tool kit that made it look very simple. https://www.youtube.com/watch?v=cyLfedKkaBA

I couldn't really find that exact tool kit for sale, but bavauto has one that looks to be identical https://www.bavauto.com/bmw-b8800100 I've searched but I haven't seen anyone use the bavauto version. Have you guys seen or heard any feedback on the bavauto kit?

Ok pulled the trigger on this tool kit. I will let you guys know how it works out when I get it. I will end up selling the kit once I’m done. Also ordered these bad boys https://uploads.tapatalk-cdn.com/20180915/8fedb625fe8393a508c2b9fa9afac058.png


Sent from my iPhone using Tapatalk

[cornercarver]

How did you like this kit? Did it come with instructions? How was the RTAB install?

I’m thinking about doing the Bimmerworld RTAB too.

[WOLFN8TR]

There’s some bad feedback on the M3Forum about the bimmerworld RTABS. Apparently the bearing is the issue. They use a cheaper bearing that causes squeaking and early failure.

Monoball RTAB Thread
http://www.m3forum.net/m3forum/showthread.php?t=584111

I would go with the Turner Monoball, CMP or the SDW RTABS.
The Turner RTAB uses a OE Bearing: Mercedes/lemforder 2043520027 Sealed ball joint.


https://uploads.tapatalk-cdn.com/20181229/5b8837c7761b708ad442319735f78af7.jpg

https://uploads.tapatalk-cdn.com/20181229/d76dff954266dde89a3a8262876347cd.jpg

https://uploads.tapatalk-cdn.com/20181229/6cc70ddaf91ad5db2853cc33dda3d42b.jpg

[d-rod]

How did you like this kit? Did it come with instructions? How was the RTAB install?

I’m thinking about doing the Bimmerworld RTAB too.

Functionally they’re great, vehicle feels much better. The issue for me is, they’re a little too harsh for my taste. I think I’m a oem bushing type of guy, don’t need “super” handling for my daily. It is great though when I’m in a hurry and taking turns quickly. I haven’t decided if I’m going to keep them or go back to stock bushing.


Sent from my iPhone using Tapatalk

[cornercarver]

Thanks for the heads-up... I’ll check out the Turner stuff, but I’m not inclined to buy from ECS / Turner after reading about the ECS management issues.

[WOLFN8TR]

Alright guys I'm preparing to replace all 3 of these bushings/ball joint

I couldn't really find that exact tool kit for sale, but bavauto has one that looks to be identical https://www.bavauto.com/bmw-b8800100 I've searched but I haven't seen anyone use the bavauto version. Have you guys seen or heard any feedback on the bavauto kit?

This kit appears to be the same and it's $80 plus $18 Shipping.

https://www.amazon.com/PMD-Products-Compatible-Replace-Bushings/dp/B018VAWETU/ref=pd_sbs_263_1?_encoding=UTF8&pd_rd_i=B018VAWETU&pd_rd_r=94f7a6ba-0ba8-11e9-ae91-771b90899601&pd_rd_w=3ie1B&pd_rd_wg=rtb48&pf_rd_p=7d5d9c3c-5e01-44ac-97fd-261afd40b865&pf_rd_r=KZDKE06NVFA2FSNKBJQY&psc=1&refRID=KZDKE06NVFA2FSNKBJQY


https://uploads.tapatalk-cdn.com/20181229/779c3d237235eca8b898c753c5c03ba2.jpg

https://uploads.tapatalk-cdn.com/20181229/b0a3196544db5a3865dab0e38dd96f4d.jpg

[isherwood]

I'm not getting a response from Vas on this. Anyone know the status of the program?